Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data analysis cluster”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Summary Report of Mission Acceleration Measurements for STS-89: Launched January 22, 1998

Support of microgravity research on the 89th flight of the Space Transportation System (STS-89) and a continued effort to characterize the acceleration environment of the Space Shuttle Orbiter and the Mir Space Station form the basis for this report. For the STS-89 mission, the Space Shuttle Endeavour was equipped with a Space Acceleration Measurement System (SAMS) unit, which collected more than a week's worth of data. During docked operations with Mir, a second SAMS unit collected approximately a day's worth of data yielding the only set of acceleration measurements recorded simultaneously on the two spacecraft. Based on the data acquired by these SAMS units, this report serves to characterize a number of acceleration events and quantify their impact on the local nature of the accelerations experienced at the Mechanics of Granular Materials (MGM) experiment location. Crew activity was shown to nearly double the median root-mean-square (RMS) acceleration level calculated below 10 Hz, while the Enhanced Orbiter Refrigerator/Freezer operating at about 22 Hz was a strong acceleration source in the vicinity of the MGM location. The MGM science requirement that the acceleration not exceed q I mg was violated numerous times during their experiment runs; however, no correlation with sample instability has been found to this point. Synchronization between the SAMS data from Endeavour and from Mir was shown to be close much of the time, but caution with respect to exact timing should be exercised when comparing these data. When orbiting as a separate vehicle prior to docking, Endeavour had prominent structural modes above 3 Hz, while Mir exhibited a cluster of modes around 1 Hz. When mated, a transition to common modes was apparent in the two SAMS data sets. This report is not a comprehensive analysis of the acceleration data, so those interested in further details should contact the Principal Investigator Microgravity Services team at the National Aeronautics and Space Administration's John H. Glenn Research Center.

Hrovat, Kenneth↗

Summary Report of Mission Acceleration Measurements for STS-89

Support of microgravity research on the 89th flight of the Space Transportation System (STS-89) and a continued effort to characterize the acceleration environment of the Space Shuttle Orbiter and the Mir Space Station form the basis for this report. For the STS-89 mission, the Space Shuttle Endeavour was equipped with a Space Acceleration Measurement System (SAMS) unit, which collected more than a week's worth of data. During docked operations with Mir, a second SAMS unit collected approximately a day's worth of data yielding the only set of acceleration measurements recorded simultaneously on the two spacecraft. Based on the data acquired by these SAMS units, this report serves to characterize a number of acceleration events and quantify their impact on the local nature of the accelerations experienced at the Mechanics of Granular Materials (MGM) experiment location. Crew activity was shown to nearly double the median root-mean-square (RMS) acceleration level calculated below 10 Hz, while the Enhanced Orbiter Refrigerator/Freezer operating at about 22 Hz was a strong acceleration source in the vicinity of the MGM location. The MGM science requirement that the acceleration not exceed plus or minus 1 mg was violated numerous times during their experiment runs; however, no correlation with sample instability has been found to this point. Synchronization between the SAMS data from Endeavour and from Mir was shown to be close much of the time, but caution with respect to exact timing should be exercised when comparing these data. When orbiting as a separate vehicle prior to docking, Endeavour had prominent structural modes above 3 Hz, while Mir exhibited a cluster of modes around 1 Hz. When mated, a transition to common modes was apparent in the two SAMS data sets. This report is not a comprehensive analysis of the acceleration data, so those interested in further details should contact the Principal Investigator Microgravity Services team at the National Aeronautics and Space Administration's John H. Glenn Research Center.

Hrovat, Kenneth↗

Cluster Analysis of Spectroscopic Line Profiles and EUV Emission in RMHD Simulations and Observations of the Solar Atmosphere

Spatially-resolved observations from the IRIS, SDO/AIA, and other space mission and ground-based telescopes, coupled with realistic 3D RMHD simulations, are a powerful tool for analysis of processes in the solar atmosphere. To better understand the dynamical and thermodynamic properties in the simulation data and their connection to observations, it is essential to determine similarities in the behaviors of the synthesized and observed emission. However, the complexity of observational data and physical processes makes comparison of observations and modeling results difficult. In this work, we show the initial results of application of K-Means clustering (unsupervised machine learning) algorithm to two different problems: 1) recognition of the typical spectroscopic line profiles observed by IRIS during solar flares and their typical dynamic behavior; 2) recognition of shocks and heating events in synthetic AIA emission data obtained from StellarBox quiet-Sun simulations. The average silhouette width technique for the KMeans algorithm is utilized in different ways to obtain optimal numbers of clusters. We discuss application of the emission clustering to visualizations of the computational volume, understanding its evolutionary trends and behavior patterns, and inversion (reconstruction) of physical properties of the solar atmosphere from synthesizes emission data.

Sadykov, Viacheslav↗

The Tropical Convective Spectrum: Archetypal Vertical Structures - Part 1

A taxonomy of tropical convective and stratiform vertical structures is constructed through cluster analysis of 3 yr of Tropical Rainfall Measuring Mission (TRMM) "warm-season" (surface temperature greater than 10 C) precipitation radar (PR) vertical profiles, their surface rainfall, and associated radar-based classifiers (convective/ stratiform and brightband existence). Twenty-five archetypal profile types are identified, including nine convective types, eight stratiform types, two mixed types, and six anvil/fragment types (nonprecipitating anvils and sheared deep convective profiles). These profile types are then hierarchically clustered into 10 similar families, which can be further combined, providing an objective and physical reduction of the highly multivariate PR data space that retains vertical structure information. The taxonomy allows for description of any storm or local convective spectrum by the profile types or families. The analysis provides a quasi-independent corroboration of the TRMM 2A23 convective/ stratiform classification. The global frequency of occurrence and contribution to rainfall for the profile types are presented, demonstrating primary rainfall contribution by midlevel glaciated convection (27%) and similar depth decaying/stratiform stages (28%-31%). Profiles of these types exhibit similar 37- and 85-GHz passive microwave brightness temperatures but differ greatly in their frequency of occurrence and mean rain rates, underscoring the importance to passive microwave rain retrieval of convective/stratiform discrimination by other means, such as polarization or texture techniques, or incorporation of lightning observations. Close correspondence is found between deep convective profile frequency and annualized lightning production, and pixel-level lightning occurrence likelihood directly tracks the estimated mean ice water path within profile types.

Precipitation radar↗

Utility of correlation techniques in gravity and magnetic interpretation

Two methods of quantitative combined analysis, internal correspondence and clustering, are presented. Model studies are used to illustrate implementation and interpretation procedures of these methods, particularly internal correspondence. Analysis of the results of applying these methods to data from the midcontinent and a transcontinental profile show they can be useful in identifying crustal provinces, providing information on horizontal and vertical variations of physical properties over province size zones, validating long wave-length anomalies, and isolating geomagnetic field removal problems. Thus, these techniques are useful in considering regional data acquired by satellites.

Chandler, V. W.↗

Landsat Thematic Mapper digital information content for agricultural environments

Landsat Thematic Mapper (TM) data collected for Imperial Valley, California in December, 1982 were digitally examined to assess their utility to distinguish among agricultural and other land-covers. Statistics for thirty-seven training sites representing a variety of crops plus urban, water and desert land-covers were obtained and analyzed using transformed divergence (TD) calculations. TD values were employed to assess intraclass variability and the best bands for classification. Four subscenes were selected for clustering or unsupervised signature extraction. These areas were agriculture, urban, desert and water land-covers. The number of clusters for these subscenes were examined and the best TM bands for interclass separability were identified. The results of the clustering and training site analyses for interclass separability were compared. The TM data were useful for the digital delimitation of most crops and other cover types in this analysis. Four bands of data are adequate for classification with the best results obtained by the selection of one band from each of the available portions of the electromagnetic spectrum. Different band combinations are best for various land-cover intraclass separability.

Haack, Barry↗

Utilizing Hierarchical Segmentation to Generate Water and Snow Masks to Facilitate Monitoring Change with Remotely Sensed Image Data

The hierarchical segmentation (HSEG) algorithm is a hybrid of hierarchical step-wise optimization and constrained spectral clustering that produces a hierarchical set of image segmentations. This segmentation hierarchy organizes image data in a manner that makes the image's information content more accessible for analysis by enabling region-based analysis. This paper discusses data analysis with HSEG and describes several measures of region characteristics that may be useful analyzing segmentation hierarchies for various applications. Segmentation hierarchy analysis for generating landwater and snow/ice masks from MODIS (Moderate Resolution Imaging Spectroradiometer) data was demonstrated and compared with the corresponding MODIS standard products. The masks based on HSEG segmentation hierarchies compare very favorably to the MODIS standard products. Further, the HSEG based landwater mask was specifically tailored to the MODIS data and the HSEG snow/ice mask did not require the setting of a critical threshold as required in the production of the corresponding MODIS standard product.

Tilton, James C.↗

Potential impact of aerosols on convective clouds revealed by Himawari-8 observations over different terrain types in Eastern China

Convective clouds are common and play a major role in Earth’s water cycle and energy balance; they may even develop into storms and cause severe rainfall events. To understand the convective cloud development process, this study investigates the impact of aerosols on convective clouds by considering the influence of both topography and diurnal variation of radiation. By combining texture analysis, clustering and thresholding methods, we identify all convective clouds in two warm seasons (May-September, 2016-2017) in eastern China based on Himawari-8 Level 1 data. Having a large diurnally resolved cloud data together with surface meteorological and environmental measurements, we investigate convective cloud properties and their variation, stratified by elevation and diurnal change. We then analyze the potential impact of aerosol on convective clouds under different meteorological conditions and topographies. In general, convective clouds tend to occur preferentially under polluted conditions in the morning, which reverses in the afternoon. Convective cloud fraction first increases then decreases with aerosol loading, which may contribute to this phenomenon. Topography and diurnal meteorological variations may affect the strength of aerosol microphysical and radiative effects. Updraft is always stronger along the windward slopes of mountains and plateaus, especially in northern China. The prevailing southerly wind near the foothills of mountains and plateaus is likely to contribute to this windward strengthening of updraft and to bring more pollutant into the mountains, thereby strengthening the microphysical effect, invigorating convective clouds. By comparison, over plain, aerosols decrease surface heating and suppresses convection by blocking solar radiation reaching the surface.

Tianmeng Chen↗

Scientific requirements for space science data systems

In the 1990's space plasma physics studies will increasingly involve correlative analysis of observations from multiple instruments and multiple spacecraft. The solar terrestrial physics missions in the 1990's will be designed around simultaneous observations from spacecraft monitoring the solar wind, the polar magnetosphere and the near and distant magnetotail. Within these regions, clusters of spacecraft flying in formation will increasingly involve comparative magnetospheric studies. No single lab will have the expertise to process and analyze all of the different types of data so the data repositories will be distributed. Catalog and browse systems will be required to help select events for study. Data compression techniques may be useful in designing the data bases used for selecting events for study. Data compression onboard the spacecraft will be necessary, since instrument data rates will be much larger than available telemetry rates. However, considerable care will be necessary to avoid losing valuable data when applying data compression algorithms.

Walker, Raymond J.↗

Upper Atmosphere Research Satellite (UARS) trade analysis

The Upper Atmosphere Research Satellite (UARS) which will collect data pertinent to the Earth's upper atmosphere is described. The collected data will be sent to the central data handling facility (CDHF) via the UARS ground system and the data will be processed and distributed to the remote analysis computer systems (RACS). An overview of the UARS ground system is presented. Three configurations were developed for the CDHF-RACS system. The CDHF configurations are discussed. The IBM CDHF configuration, the UNIVAC CDHF configuration and the vax cluster CDHF configuration are presented. The RACS configurations, the IBM RACS configurations, UNIVAC RACS and VAX RACS are detailed. Due to the large on-line data estimate to approximately 100 GB, a mass storage system is considered essential to the UARS CDHF. Mass storage systems were analyzed and the Braegan ATL, the RCA optical disk, the IBM 3850 and the MASSTOR M860 are discussed. It is determined that the type of mass storage system most suitable to UARS is the automated tape/cartridge device. Two devices of this type, the IBM 3850 and the MASSTOR MSS are analyzed and the applicable tape/cartridge device is incorporated into the three CDHF-RACS configurations.

Fox, M. M.↗

Diurnal Variability of Vertical Structure from a TRMM Passive Microwave "Virtual Radar" Retrieval

Robust description of the diurnal cycle from TRMM observations is complicated by the limitations of Low Earth Orbit (LEO) sampling; from a 'climatological' perspective, sufficient sampling must exist to control for both spatial and seasonal variability, before tackling an additional diurnal component (e.g., with 8 additional 3-hourly or 24 1-hourly bins). For documentation of vertical structure, the narrow sample swath of the TRMM Precipitation Radar limits the resolution of any of these components. A neural-network based 'virtual radar" retrieval has been trained and internally validated, using multifrequency / multipolarization passive microwave(TM1) brightness temperatures and textures parameters and lightning (LIS) observations, as inputs, and PR volumetric reflectivity as targets (outputs). By training the algorithms (essentially highly multivariate, nonlinear regressions) on a very large sample of high-quality co-located data from the center of the TRMM swath, 3D radar reflectivity and derived parameters (VIL, IWC, Echo Tops, etc.) can be retrieved across the entire TMI swath, good to 8-9% over the dynamic range of parameters. As a step in the retrieval (and as an output of the process), each TMI multifrequency pixel (at 85 GHz resolution) is classified into one of the 25 archetypal radar profile vertical structure "types", previously identified using cluster analysis. The dynamic range of retrieved vertical structure appears to have higher fidelity than the current (Version 6) experimental GPROF hydrometeor vertical structure retrievals. This is attributable to correct representation of the prior probabilities of vertical structure variability in the neural network training data, unlike the GPROF cloud-resolving model training dataset used in the V6 algorithms. The LIS lightning inputs are supplementary inputs, and a separate offline neural network has been trained to impute (predict) LIS lightning from passive-microwave-only data. The virtual radar retrieval is thus, in principle, extensible to Aqua/AMSR-E and NPOESS/CMIS passive microwave instruments. The virtual radar approach yields a threefold increase in effective sampling from the mission, albeit of lower-quality "retrieved" data, reducing the variance of local estimates by one third (or the standard deviation by-0.57). In this talk, the variance reduction is leveraged to more finely resolve global diurnal variability in both space and time (local hour).

Boccippio, Dennis J.↗

Analysis of plasmaspheric plumes: CLUSTER and IMAGE observations and numerical simulations

Plasmaspheric plumes have been routinely observed by CLUSTER and IMAGE. The CLUSTER mission provides high time resolution four-point measurements of the plasmasphere near perigee. Total electron density profiles can be derived from the plasma frequency and/or from the spacecraft potential (note that the electron spectrometer is usually not operating inside the plasmasphere); ion velocity is also measured onboard these satellites (but ion density is not reliable because of instrumental limitations). The EUV imager onboard the IMAGE spacecraft provides global images of the plasmasphere with a spatial resolution of 0.1 RE every 10 minutes; such images acquired near apogee from high above the pole show the geometry of plasmaspheric plumes, their evolution and motion. We present coordinated observations for 3 plume events and compare CLUSTER in-situ data (panel A) with global images of the plasmasphere obtained from IMAGE (panel B), and with numerical simulations for the formation of plumes based on a model that includes the interchange instability mechanism (panel C). In particular, we study the geometry and the orientation of plasmaspheric plumes by using a four-point analysis method, the spatial gradient. We also compare several aspects of their motion as determined by different methods: (i) inner and outer plume boundary velocity calculated from time delays of this boundary observed by the wave experiment WHISPER on the four spacecraft, (ii) ion velocity derived from the ion spectrometer CIS onboard CLUSTER, (iii) drift velocity measured by the electron drift instrument ED1 onboard CLUSTER and (iv) global velocity determined from successive EUV images. These different techniques consistently indicate that plasmaspheric plumes rotate around the Earth, with their foot fully co-rotating, but with their tip rotating slower and moving farther out.

Darouzet, Fabien↗

Coronado Ecological Conservation: Assessing Vegetation Change Due to Border Wall Construction and Shifting Social Trails

Species monitoring is essential for mitigating the impacts of plant invasion, such as radical changes in an area’s ecosystem, degraded soil health, increased wildfire severity, landslides, and increased flooding. For this project, NASA DEVELOP partnered with the National Park Service (NPS) to investigate invasive species in disturbed lands: specifically, areas affected by off-trail travel and U.S.-Mexico border construction activities. The team assessed how construction has impacted the distribution of Lehmann’s lovegrass and Russian thistle invasives throughout Coronado National Memorial, AZ from 1986-2022. Using data from Landsat 5 and 8, Sentinel-2, NAIP, and PlanetScope, the team computed NDVI, NDMI, MSAVI2, EVI, and Tasseled Cap Wetness, Brightness, and Greenness transformations as vegetation health indicators to input into various machine learning algorithms. To minimize noise, the team conducted Principal Component Analysis on vegetation indices and spectral bands before running k-means clustering and random forest classification algorithms. Between all datasets, the team found that the median area fully overtaken by invasive plants was 5.37% of the park’s total area in 2022. The NPS will use end products to help increase restoration efforts in disturbed areas with high concentrations of invasive plants, and this project can serve as a jumping off point for future invasive species monitoring. The NPS’s collection of ground data for 2022-2023, in conjunction with future data collection, will notably improve the accuracy of classification models, leading to more precise monitoring of invasive species spread over time.

Coronado National Memorial↗

Measurement of CPAS Main Parachute Rate of Descent

The Crew Exploration Vehicle Parachute Assembly System (CPAS) is being designed to land the Orion Crew Module (CM) at a safe rate of descent at splashdown. Flight test performance must be measured to a high degree of accuracy to ensure this requirement is met with the most efficient design possible. Although the design includes three CPAS Main parachutes, the requirement is that the system must not exceed 33 ft/s under two Main parachutes, should one of the Main parachutes fail. Therefore, several tests were conducted with clusters of two Mains. All of the steady-state rate of descent data are normalized to standard sea level conditions and checked against the limit. As the Orion design gains weight, the system is approaching this limit to within measurement precision. Parachute "breathing," cluster interactions, and atmospheric anomalies can cause the rate of descent to vary widely and lead to challenges in characterizing parachute terminal performance. An early test had contradictory rate of descent results from optical trajectory and Differential Global Positioning Systems (DGPS). A thorough analysis of the data sources and error propagation was conducted to determine the uncertainty in the trajectory. It was discovered that the Time Space Position Information (TSPI) from the optical tracking provided accurate position data. However, the velocity from TPSI must be computed via numerical differentiation, which is prone to large error. DGPS obtains position through pseudo-range calculations from multiple satellites and velocity through Doppler shift of the carrier frequency. Because the velocity from DGPS is a direct measurement, it is more accurate than TSPI velocity. To remedy the situation, a commercial off-the-shelf product that combines GPS and an Inertial Measurement Unit (IMU) was purchased to significantly improve rate of descent measurements. This had the added benefit of solving GPS dropouts during aircraft extraction. Statistical probability distributions for CPAS Main parachute rate of descent and drag coefficient were computed and plotted. Using test data, a terminal rate of descent at splashdown can be estimated as a function of canopy loading.

Ray, Eric S.↗

Assessment of the SFC database for analysis and modeling

SFC is one of the four clusters that make up the Integrated Work Control System (IWCS), which will integrate the shuttle processing databases at Kennedy Space Center (KSC). The IWCS framework will enable communication among the four clusters and add new data collection protocols. The Shop Floor Control (SFC) module has been operational for two and a half years; however, at this stage, automatic links to the other 3 modules have not been implemented yet, except for a partial link to IOS (CASPR). SFC revolves around a DB/2 database with PFORMS acting as the database management system (DBMS). PFORMS is an off-the-shelf DB/2 application that provides a set of data entry screens and query forms. The main dynamic entity in the SFC and IOS database is a task; thus, the physical storage location and update privileges are driven by the status of the WAD. As we explored the SFC values, we realized that there was much to do before actually engaging in continuous analysis of the SFC data. Half way into this effort, it was realized that full scale analysis would have to be a future third phase of this effort. So, we concentrated on getting to know the contents of the database, and in establishing an initial set of tools to start the continuous analysis process. Specifically, we set out to: (1) provide specific procedures for statistical models, so as to enhance the TP-OAO office analysis and modeling capabilities; (2) design a data exchange interface; (3) prototype the interface to provide inputs to SCRAM; and (4) design a modeling database. These objectives were set with the expectation that, if met, they would provide former TP-OAO engineers with tools that would help them demonstrate the importance of process-based analyses. The latter, in return, will help them obtain the cooperation of various organizations in charting out their individual processes.

Centeno, Martha A.↗

The application of automatic recognition techniques in the Apollo 9 SO-65 experiment

A synoptic feature analysis is reported on Apollo 9 remote earth surface photographs that uses the methods of statistical pattern recognition to classify density points and clusterings in digital conversion of optical data. A computer derived geological map of a geological test site indicates that geological features of the range are separable, but that specific rock types are not identifiable.

Macdonald, R. B.↗

A comprehensive X-ray study of the Small Magellanic Cloud

A comprehensive analysis of the Einstein data base on the SMC is presented. Twenty-four soures are classified as objects in the SMC, and 13 as Galactic stars, AGN, and clusters of galaxies. The detected discrete emitters account for less than half of the excess emission associated with the SMC. The extensive diffuse emission has an X-ray spectrum substantially softer than that of the discrete sources, which is consistent with the presence of X-ray-emitting coronal gas associated with the SMC. A detailed study of the discrete sources is presented. An X-ray source is found to vary in its X-ray luminosity by a factor larger than 10 over a period of about 1 yr and has a relatively hard X-ray spectrum which apparently changes with the X-ray luminosity. It is suggested that this source, associated with a B1-type star, is a new high-mass X-ray binary in the Small Cloud.

Wang, Qingde↗

A Deep Imaging Survey of NGC 6475 and a Deep Survey of the Young Open Cluster Alpha Persei

We have published three papers directly related to the x-ray data (see below), and one other paper directly related to the optical photometry obtained in connection to the ROSAT data analysis (also listed below). In addition, we have used the x-ray data in combination with the optical photometry and with high resolution optical spectra that we have obtained (to derive spectroscopic rotational velocities) to address questions related to the dependence of coronal activity on the rotation rate, mass, and other characteristics of the target stars. The overall goal of our ROSAT projects has been to determine the time evolution of coronal activity in low mass stars, and from that behavior place constraints on the physical processes involved in generating coronal activity. NGC 6475 and Alpha Persei are important parts of that process. We are now beginning to address how these data constrain theoretical models of angular momentum evolution and dynamo magnetic field generation (see paper by Stauffer et al. and Krishnamurthi et al. listed below in the "related papers" section). We are still working on two papers pertaining to this grant (rotational velocities and chromospheric activity of Alpha Persei x-ray sources and rotational velocities and lithium abundances of NGC 6475 sources), but we will publish those papers using funds from other grants.

Stauffer, John R.↗