Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cycles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Optimization and life-cycle cost of health clinic PV system for a rural area in southern Iraq using HOMER software

This paper addresses the need for electricity of rural areas in southern Iraq and proposes a photovoltaic (PV) solar system to power a health clinic in that region. The total daily health clinic load is 31.6 kW h and detailed loads are listed. The National Renewable Energy Laboratory (NREL) optimization computer model for distributed power, ''HOMER,'' is used to estimate the system size and its life-cycle cost. The analysis shows that the optimal system's initial cost, net present cost, and electricity cost is US$ 50,700, US$ 60,375, and US$ 0.238/kW h, respectively. These values for the PV system are compared with those of a generator alone used to supply the load. We found that the initial cost, net present cost of the generator system, and electricity cost are US$ 4500, US$ 352,303, and US$ 1.332/kW h, respectively. We conclude that using the PV system is justified on humanitarian, technical, and economic grounds. (author)

14 SOLAR ENERGY↗

The human papillomavirus type 58 E7 oncoprotein modulates cell cycle regulatory proteins and abrogates cell cycle checkpoints

HPV type 58 (HPV-58) is the third most common HPV type in cervical cancer from Eastern Asia, yet little is known about how it promotes carcinogenesis. In this study, we demonstrate that HPV-58 E7 significantly promoted the proliferation and extended the lifespan of primary human keratinocytes (PHKs). HPV-58 E7 abrogated the G1 and the postmitotic checkpoints, although less efficiently than HPV-16 E7. Consistent with these observations, HPV-58 E7 down-regulated the cellular tumor suppressor pRb to a lesser extent than HPV-16 E7. Similar to HPV-16 E7 expressing PHKs, Cdk2 remained active in HPV-58 E7 expressing PHKs despite the presence of elevated levels of p53 and p21. Interestingly, HPV-58 E7 down-regulated p130 more efficiently than HPV-16 E7. Our study demonstrates a correlation between the ability of down-regulating pRb/p130 and abrogating cell cycle checkpoints by HPV-58 E7, which also correlates with the biological risks of cervical cancer progression associated with HPV-58 infection.

60 APPLIED LIFE SCIENCES↗

Update on the Investigation of Commercial Drying Cycles Using the Advanced Drying Cycle Simulator

The purpose of this report is to document updates on the apparatus to simulate commercial vacuum drying procedures at the Nuclear Energy Work Complex at Sandia National Laboratories. Validation of the extent of water removal in a dry spent nuclear fuel storage system based on drying procedures used at nuclear power plants is needed to close existing technical gaps. Operational conditions leading to incomplete drying may have potential impacts on the fuel, cladding, and other components in the system during subsequent storage and disposal. A general lack of data suitable for model validation of commercial nuclear canister drying processes necessitates well-designed investigations of drying process efficacy and water retention. Scaled tests that incorporate relevant physics and well-controlled boundary conditions are essential to provide insight and guidance to the simulation of prototypic systems undergoing drying processes. This report documents a new test apparatus, the Advanced Drying Cycle Simulator (ADCS). This apparatus was built to simulate commercial drying procedures and quantify the amount of residual water remaining in a pressurized water reactor (PWR) fuel assembly after drying. The ADCS was constructed with a prototypic 17×17 PWR fuel skeleton and waterproof heater rods to simulate decay heat. These waterproof heaters are the next generation design to heater rods developed and tested at Sandia National Laboratories in FY20. This report describes the ADCS vessel build that was completed late in FY22, including the receipt of the prototypic length waterproof heater rods and construction of the fuel basket and the pressure vessel components. In addition, installations of thermocouples, emissivity coupons, pressure and vacuum lines, pressure transducers, and electrical connections were completed. Preliminary power functionality testing was conducted to demonstrate the capabilities of the ADCS. In FY23, a test plan for the ADCS will be developed to implement a drying procedure based on measurements from the process used for the High Burnup Demonstration Project. While applying power to the simulated fuel rods, this procedure is expected to consist of filling the ADCS vessel with water, draining the water with applied pressure and multiple helium blowdowns, evacuating additional water with a vacuum drying sequence at successively lower pressures, and backfilling the vessel with helium. Additional investigations are expected to feature failed fuel rod simulators with engineered cladding defects and guide tubes with obstructed dashpots to challenge the drying system with multiple water retention sites.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Life Cycle Assessment of Recycling High-Density Polyethylene Plastic Waste

Increasing production and use of various novel plastics products, a low recycling rate, and lack of effective recycling/disposal methods have resulted in an exponential growth in plastic waste accumulation in landfills and in the environment. To better understand the effects of plastic waste, Life Cycle Analysis (LCA) was done to compare the effects of various production and disposal methods. LCA shows the specific effects of the cradle-to-grave or cradle-to-cradle scenarios for landfill, incineration, and mechanical recycling. The analysis clearly indicates that increasing recycling of plastics can significantly save energy and eliminate harmful emissions of various carcinogens and GHGs into the environment. As recycling increases, the need for virgin-plastic production can be greatly reduced. Furthermore, the results of this study may help improve current mechanical recycling processes as well as potential future recycling methods, such as chemical recycling. Concerns about the current recycling/disposal methods for plastics have brought increasing attention to the waste accumulation problem. However, with the current COVID-19 pandemic, plastic accumulation is expected to increase significantly in the near future. A better understanding of the quantitative effects of the various disposal methods can help guide policies and future research toward effective solutions of the plastic waste problem.

36 MATERIALS SCIENCE↗

Influence of Dynamic Land Use and Land Cover Change on Simulated Global Terrestrial Carbon and Nitrogen Cycles, Climate-carbon Cycle Feedbacks, and Interactions with Rising CO2 and Anthropogenic Nitrogen Deposition

Previous work has demonstrated the sensitivity of terrestrial net carbon exchange to disturbance history and land use patterns at the scale of individual sites or regions. Here we show the influence of land use and land cover dynamics over the historical period 1850-present on global-scale carbon, nutrient, water, and energy fluxes. We also explore the spatial and temporal details of interactions among land use and disturbance history, rising atmospheric carbon dioxide consentation, and increasing anthropogenic nitrogen deposition. Our simulations show that these interactions are significant, and that their importance grows over time, expressed as a fraction of the independent forcing terms. We conclude with an analysis of the influence of these interactions on the sign and magnitude of global climate-carbon cycle feedbacks.

54 ENVIRONMENTAL SCIENCES↗

High Voltage LiNi 0.5 Mn 0.3 Co 0.2 O 2 /Graphite Cell Cycled at 4.6 V with a FEC/HFDEC-Based Electrolyte

A high voltage LiNi0.5Mn0.3Co0.2O2/graphite cell with a fluorinated electrolyte formulation 1.0 m LiPF6 fluoroethylene carbonate/bis(2,2,2-trifluoroethyl) carbonate is reported and its electrochemical performance is evaluated at cell voltage of 4.6 V. Comparing with its nonfluorinated electrolyte counterpart, the reported fluorinated one shows much improved Coulombic efficiency and capacity retention when a higher cut-off voltage (4.6 V) is applied. Scanning electron microscopy/energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy data clearly demonstrate the superior oxidative stability of the new electrolyte. The structural stability of the bulk cathode materials cycled with different electrolytes is extensively studied by X-ray absorption near edge structure and X-ray diffraction.

36 MATERIALS SCIENCE↗

Long Cycle Life, Low Self-Discharge Sodium-Selenium Batteries with High Selenium Loading and Suppressed Polyselenide Shuttling

The utilization of selenium as a cathode in rechargeable sodium–selenium batteries is hampered by low Se loading, inferior electrode kinetics, and polyselenide shuttling between the cathode and anode. Here a high-performance sodium–selenium cell is presented by coupling a binder-free, self-interwoven carbon nanofiber–selenium cathode with a light-weight carbon-coated bifunctional separator. With this strategy, electrodes with a high Se mass loading (4.4 mg cm -2 ) render high reversible capacities of 599 mA h g -1 at 0.1C rate and 382 mA h g -1 at 5C rate. In addition, this novel cell offers good shelf-life with a low self-discharge, retaining 93.4% of its initial capacity even after resting for six months. As evidenced by experimental and density functional theory analysis, the remarkable dynamic (cycle life) and static (shelf-life) stabilities originate from the high electrical conductivity, improved Na-ion accessibility through the 3D interconnected open channels, and highly restrained polyselenide shuttle. The findings demonstrate the viability of high-performance sodium–selenium batteries with high selenium loading.

25 ENERGY STORAGE↗

A Comprehensive Analysis of the Interphasial and Structural Evolution over Long–Term Cycling of Ultrahigh–Nickel Cathodes in Lithium–Ion Batteries

Ultrahigh-Ni layered oxides hold great promise as high-energy-density cathodes at an affordable cost for lithium-ion batteries, yet their practical application is greatly hampered by the poor cyclability. Herein, by employing LiNi 0.94 Co 0.06 O 2 as a model cathode in a full-cell configuration, the interphasial and structural evolution processes of ultrahigh-Ni layered oxides are systematically investigated over the course of their service life (1500 cycles). By applying advanced analytic techniques (e.g., Li-isotope labeling, region-of-interest method), the dynamic chemical evolution on the cathode surface is revealed with spatial resolution, and the correlation between lattice distortion and cathode surface reactivity is established. Benefiting from in situ X-ray diffraction (XRD) analysis, the ultrahigh-Ni layered oxide is demonstrated to undergo dual-phase reaction mechanisms with huge lattice variation, which leads to a decrease in crystallinity and secondary particle pulverization. Furthermore, the critical impact of cathode surface reaction on the graphite anode–electrolyte interphase (AEI) is revealed at nanometer scale, and a universal chemical/physical evolution process of the AEI is illustrated, for the first time. Finally, the practical viability of ultrahigh-Ni layered oxides is demonstrated through Al-doping strategy. Finally, this work presents a comprehensive understanding of the structural and interphasial degradation of ultrahigh-Ni layered oxide cathodes for developing high-energy-density lithium-ion batteries.

25 ENERGY STORAGE↗

Techno-economic and Life Cycle Analysis of MixAlco® Processes for Mixed Alcohol Production from Brown Algae

The need for producing renewable fuels from biomass has increased due to depleting fossil resources and environmental concerns. However, the low fraction of biomass carbon converted to product is an undeniable drawback for most current biofuel productions from fermentation due to undecomposed lignin in biomass composition and carbon loss as CO 2 . In this work, two main production routes of the MixAlco® process, the ketonization route (KR) and esterification route (ER) are evaluated for the mixed alcohol production by brown algae, a third-generation biomass without lignin. A novel fermentation process using syntrophic bacteria consortia (SBC) is developed to produce acetic acid from waste gas produced by KR and ER process. The paper investigates the integrated flowsheet for these alternative routes, using techno-economic and life cycle analysis to compare the minimum selling price and environmental impacts. From TEA, we find that the overall costs for KR and ER are lower than the SBC processes. The cost of ketonization routes is lower than esterification routes. The capital cost and operating cost for the ER+SBC process are the highest. Raw materials and utilities are the two major costs for all the processing routes examined. Here, the MSP for the ER+SBC process is the lowest out of all four routes. ER process performs the best in terms of environmental impacts except in water depletion compared with other processes, while the KR process performs the worst regarding the environmental metrics.

59 BASIC BIOLOGICAL SCIENCES↗

Native Mass Spectrometry Analysis of Oligomerization States of Fluorescence Recovery Protein and Orange Carotenoid Protein: Two Proteins Involved in the Cyanobacterial Photoprotection Cycle [Native Mass Spectrometry Analysis of Oligomerization States of FRP and OCP: Two Proteins Involved in the Cyanobacterial Photoprotection Cycle]

Here, the orange carotenoid protein (OCP) and fluorescence recovery protein (FRP) are present in many cyanobacteria, and regulate an essential photoprotection cycle in an antagonistic manner as a function of light intensity. We characterized the oligomerization states of OCP and FRP by using native mass spectrometry, a technique that has the capability of studying native proteins under a wide range of protein concentrations and molecular masses. We found that dimeric FRP (dFRP) is the predominant state at protein concentrations ranging from 3 μM to 180 μM, and that higher order oligomers gradually form at protein concentrations above this range. The OCP, however, demonstrates significantly different oligomerization behavior. Monomeric OCP (mOCP) dominates at low protein concentrations, with an observable population of dimeric OCP (dOCP). The ratio of dOCP to mOCP, however, increases proportionally with the protein concentration. Higher order OCP oligomers form at protein concentrations beyond 10 μM. Additionally, native mass spectrometry coupled with ion mobility allowed us to measure protein collisional cross sections (CCS) and interrogate the unfolding of different FRP and OCP oligomers. We found that monomeric FRP exhibits a one-stage unfolding process, which could be correlated with its C-terminal bent crystal structure. The structural domain compositions of FRP and OCP are compared and discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Determining the Reliability of Measuring Mercury Cycling Gene Abundance with Correlations with Mercury and Methylmercury Concentrations

Methylmercury (MeHg) is a bioaccumulative toxic contaminant in many ecosystems but factors governing its production are poorly understood. Recent work has shown that the anaerobic microbial conversion of mercury (Hg) to MeHg requires the Hg-methylation genes hgcAB and that these genes can be used as biomarkers in PCR-based estimators of Hg-methylator abundance. In an effort to determine reliable methods for assessing hgcA abundance and diversity and linking it to MeHg concentrations, multiple approaches were compared including metagenomic shotgun sequencing, 16S rRNA gene pyrosequencing and cloning/sequencing hgcAB gene products. Hg-methylator abundance was also determined by quantitative hgcA qPCR amplification and metaproteomics for comparison to the above measurements. Samples from eight Hg-contaminated sites were examined over a range of total Hg (HgT; 0.03–14 mg kg-1 wet wt. soil) and MeHg (0.05–27 µg kg-1 wet wt. soil) concentrations. In the metagenome and amplicon sequencing of hgcAB diversity, the Deltaproteobacteria were the dominant Hg-methylators, while Firmicutes and methanogenic Archaea were typically ~50% less abundant. This was consistent with metaproteomics estimates where the Deltaproteobacteria were consistently higher. The 16S rRNA gene pyrosequencing did not have sufficient resolution to identify hgcAB+ species. Metagenomic and hgcAB results were similar for Hg-methylator diversity and showed a tractable relationship between Hg-methylating bacteria and soil Hg concentrations among similar environmental samples. However, clade-specific qPCR-based approaches for hgcA are only appropriate when comparing the abundance of a particular clade across various samples.

59 BASIC BIOLOGICAL SCIENCES↗

Techno-Economic Analysis of an Intensified Integrated Gasification Combined Cycle (IGCC) Power Plant Featuring a Combined Membrane Reactor - Adsorptive Reactor (MR-AR) System

In this work, the novel concept of a combined membrane-adsorptive reactor sequence (MRAR) is developed and implemented in an Integrated Gasification Combined Cycle (IGCC) plant. This novel MR-AR IGCC plant is subsequently analyzed from an economic viewpoint through a techno-economic analysis (TEA) of the proposed plant. This novel design can achieve over 90% carbon capture without the use of a Dual-Stage Selexol unit. The resultant intensified design is more efficient from both an economic and power production perspective than the traditional IGCC plants with pre-combustion Carbon-Capture Storage (CCS) technology. The COMSOL software package is utilized to simulate the MR-AR sequence proposed in this work, and the UNISIM software (HoneywellTM) is used to create an intensified process flowsheet of the proposed MR-AR IGCC plant, which is subsequently heat-integrated. The TEA developed for the MR-AR IGCC power plant will be used to identify the extent of process intensification the proposed design has over the traditional IGCC plants with pre-combustion CCS. Furthermore, the results demonstrate a reduction in both the cost-of-electricity (COE) and in the capital cost of the proposed design over the baseline case.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗