Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “correspondence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Inclusive search for highly boosted Higgs bosons decaying to bottom quark-antiquark pairs in proton-proton collisions at $\sqrt{s} =$ 13 TeV

A search for standard model Higgs bosons (H) produced with transverse momentum (p$_{T}$) greater than 450 GeV and decaying to bottom quark-antiquark pairs ($ \mathrm{b}\overline{\mathrm{b}} $) is performed using proton-proton collision data collected by the CMS experiment at the LHC at $ \sqrt{s} $ = 13 TeV. The data sample corresponds to an integrated luminosity of 137 fb$^{−1}$. The search is inclusive in the Higgs boson production mode. Highly Lorentz-boosted Higgs bosons decaying to $ \mathrm{b}\overline{\mathrm{b}} $ are reconstructed as single large-radius jets, and are identified using jet substructure and a dedicated b tagging technique based on a deep neural network. The method is validated with Z →$ \mathrm{b}\overline{\mathrm{b}} $ decays. For a Higgs boson mass of 125 GeV, an excess of events above the background assuming no Higgs boson production is observed with a local significance of 2.5 standard deviations (σ), while the expectation is 0.7. The corresponding signal strength and local significance with respect to the standard model expectation are μ$_{H}$ = 3.7 ± 1.2(stat)$ {}_{-0.7}^{+0.8} $(syst)$ {}_{-0.5}^{+0.8} $(theo) and 1.9 σ. Additionally, an unfolded differential cross section as a function of Higgs boson p$_{T}$ for the gluon fusion production mode is presented, assuming the other production modes occur at the expected rates.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Positivity and geometric function theory constraints on pion scattering

This paper presents the fascinating correspondence between the geometric function theory and the scattering amplitudes with O(N) global symmetry. A crucial ingredient to show such correspondence is a fully crossing symmetric dispersion relation in the z-variable, rather than the fixed channel dispersion relation. We have written down fully crossing symmetric dispersion relation for O(N) model in z-variable for three independent combinations of isospin amplitudes. We have presented three independent sum rules or locality constraints for the O(N) model arising from the fully crossing symmetric dispersion relations. We have derived three sets of positivity conditions. We have obtained two-sided bounds on Taylor coefficients of physical Pion amplitudes around the crossing symmetric point (for example, π + π – → π 0 π 0 ) applying the positivity conditions and the Bieberbach-Rogosinski inequalities from geometric function theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Mixed gauge-global symmetries, elliptic modes, and black hole thermodynamics in Hořava-Lifshitz gravity

In Hořava-Lifshitz gravity, a putative consistent theory of quantum gravity for which there is evidence for both black hole thermodynamics and a holographic construction, spacetime is endowed with a preferred dynamical spacelike foliation. The theory has a leaf reparameterization symmetry that is neither global nor local gauge, hyperbolic and elliptic equations of motion, a lack of splittability, and universal horizon black hole solutions. The reparameterization symmetry is “mixed”: it is a local symmetry in one coordinate yet global on each leaf. More broadly it is an example of both unfree and projectable gauge symmetries. The mixed symmetry and associated charge has not yet been accounted for in calculations of universal horizon thermodynamics in Hořava-Lifshitz gravity. This has led to problems, in particular the failure of the first law in a class of asymptotically AdS solutions where the normal to the leaves of the foliation is not aligned with the time translation Killing vector at infinity. We show how the dynamics of the charge corresponding to this symmetry coupled with the other features above resolves this issue. We then briefly comment how this mixed symmetry, the corresponding charge, and the elliptic equations of motion also conspire to evade recent holographic arguments for only local gauge fields in consistent theories of quantum gravity due to the lack of splittability of the elliptic equation and associated mode.

Global Symmetries↗
DOE OSTI2025

Search for resonant leptoquark production via lepton-jet signatures in pp collisions at $\sqrt{s}=13$ TeV and $\sqrt{s}=13.6$ TeV with the ATLAS detector

This paper presents a search for physics beyond the Standard Model targeting a heavy resonance visible in the invariant mass of the lepton-jet system. The analysis focuses on final states with a high-energy lepton and jet, and is optimised for the resonant production of leptoquarks — a novel production mode mediated by the lepton content of the proton originating from quantum fluctuations. Four distinct and orthogonal final states are considered: e+light jet, μ+light jet, e+b-jet, and μ+b-jet, constituting the first search at the Large Hadron Collider for resonantly produced leptoquarks with couplings to electrons and muons. Events with an additional same-flavour lepton, as expected from higher-order diagrams in the signal process, are also included in each channel. The search uses proton-proton collision data from the full Run 2, corresponding to an integrated luminosity of 140 fb −1 at a centre-of-mass energy of $\sqrt{s}=13$ TeV, and from a part of Run 3 (2022–2023), corresponding to 55 fb −1 at $\sqrt{s}=13.6$ TeV. No significant excess over Standard Model predictions is observed. The results are interpreted as exclusion limits on scalar leptoquark ($\tilde{S}$ 1 ) production, substantially improving upon previous ATLAS constraints from leptoquark pair production for large coupling values. The excluded $\tilde{S}$ 1 $\tilde{S}$ 1 mass ranges depend on the coupling strength, reaching up to 3.4 TeV for quark-lepton couplings y de = 1.0, and up to 4.3 TeV, 3.1 TeV, and 2.8 TeV for y sμ , y be , and y bμ couplings set to 3.5, respectively.

Hadron-Hadron Scattering↗
DOE OSTI2024

3-Manifolds and VOA Characters

Abstract By studying the properties ofq-series$$\widehat{Z}$$ Z ^ -invariants, we develop a dictionary between 3-manifolds and vertex algebras. In particular, we generalize previously known entries in this dictionary to Lie groups of higher rank, to 3-manifolds with toral boundaries, and to BPS partition functions with line operators. This provides a new physical realization of logarithmic vertex algebras in the framework of the 3d-3d correspondence and opens new avenues for their future study. For example, we illustrate how invoking a knot-quiver correspondence for$$\widehat{Z}$$ Z ^ -invariants leads to many infinite families of new fermionic formulae for VOA characters.

Physics↗
DOE OSTI2022

Quantifying contributions of ozone changes to global and arctic warming during the second half of the twentieth century

Ozone is the third most important greenhouse gas in driving global warming, mainly due to increased tropospheric ozone. About 50% of the growth of global tropospheric ozone since preindustrial time occurred during 1955–2005, with continued growth since then. Furthermore, this study quantifies the relative contributions of ozone changes during 1955–2005 to total observed global and Arctic climate changes by comparing CESM1 historical simulations with all anthropogenic and natural radiative forcings including realistic ozone changes, and with the same forcings except with constant ozone or well-mixed greenhouse gases (WMGHG). Results indicate that ozone changes during 1955–2005 have strongly enhanced the downwelling longwave flux and increased net shortwave flux at the surface, and thus significantly contributed about 0.15 °C of global mean surface warming, roughly 21%, 26% and 16% of the observed, all-forcing and WMGHG-driven trends, respectively. In the Arctic in the same period, corresponding ozone-driven warming was about 0.63 °C, roughly 48%, 40% and 25% of the same three trends. During 1979–2005, these ozone changes have markedly added about 0.25 × 10 6 km 2 to the decrease in the Arctic sea ice extent (SIE), or roughly 25%, 48%, and 40% of the same three trends. Considering that the ozone-driven radiative forcing of about 0.22 (0.06) W·m –2 in 1955–2005 (1979–2005) was about 12% (6%) of the corresponding WMGHG forcing, ozone changes had contributed disproportionately to global and Arctic warming and Arctic sea ice decline during the second half of the twentieth century. Tropospheric ozone has shown relatively steady growth since 2006 and might have significantly contributed recent observed warming over the global and the Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Engineering the cellulolytic extreme thermophile Caldicellulosiruptor bescii to reduce carboxylic acids to alcohols using plant biomass as the energy source

Abstract Caldicellulosiruptor bescii is the most thermophilic cellulolytic organism yet identified (Topt 78 °C). It grows on untreated plant biomass and has an established genetic system thereby making it a promising microbial platform for lignocellulose conversion to bio-products. Here, we investigated the ability of engineered C. bescii to generate alcohols from carboxylic acids. Expression of aldehyde ferredoxin oxidoreductase (aor from Pyrococcus furiosus) and alcohol dehydrogenase (adhA from Thermoanaerobacter sp. X514) enabled C. bescii to generate ethanol from crystalline cellulose and from biomass by reducing the acetate produced by fermentation. Deletion of lactate dehydrogenase in a strain expressing the AOR–Adh pathway increased ethanol production. Engineered strains also converted exogenously supplied organic acids (isobutyrate and n-caproate) to the corresponding alcohol (isobutanol and hexanol) using both crystalline cellulose and switchgrass as sources of reductant for alcohol production. This is the first instance of an acid to alcohol conversion pathway in a cellulolytic microbe.

Biotechnology & Applied Microbiology↗
DOE OSTI2025

Explaining word embeddings with perfect fidelity: a case study in predicting research impact

The best-performing approaches for scholarly document quality prediction are based on embedding models. In addition to their performance when used in classifiers, embedding models can also provide predictions even for words that were not contained in the labelled training data for the classification model, which is important in the context of the ever-evolving research terminology. Although model-agnostic explanation methods, such as Local interpretable model-agnostic explanations, can be applied to explain machine learning classifiers trained on embedding models, these produce results with questionable correspondence to the model. We introduce a new feature importance method, Self-Model Entities Rated (SMER), for logistic regression-based classification models trained on word embeddings. We show that SMER has theoretically perfect fidelity with the explained model, as the average of logits of SMER scores for individual words (SMER explanation) exactly corresponds to the logit of the prediction of the explained model. Quantitative and qualitative evaluation is performed through five diverse experiments conducted on 50,000 research articles (papers) from the CORD-19 corpus. In conclusion, through an AOPC curve analysis, we experimentally demonstrate that SMER produces better explanations than LIME, SHAP and global tree surrogates.

Coarse-grained models↗
DOE OSTI2022

Optimizing design and dispatch of a renewable energy system with combined heat and power

We embellish a mixed-integer program that prescribes a set of renewable energy, conventional generation, and storage technologies to procure, along with a corresponding dispatch strategy. Specifically, we add combined heat and power to this set. The model minimizes fixed and operational costs less incentives for the use of various technologies, subject to a series of component interoperability and system-wide constraints. The resulting mixed-integer linear program contains hundreds of thousands of variables and constraints. We demonstrate how to efficiently formulate and solve the corresponding instances such that we produce near-optimal solutions in minutes. A previous rendition of the model required hours of solution time for the same instances.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Investigations of Polymethacrylate Tribochemical Films Using X-Ray Spectroscopy and Optical Profilometry

This study investigates the elemental composition and surface morphology of solid tribochemical films formed on steel surfaces. The reversible addition-fragmentation chain transfer (RAFT) method was used to synthesize nine different metal-free polymers, which were blended into commercial base oils. The polymers were either homopolymers of dodecyl methacrylate and ethylhexyl methacrylate or were co-polymers of these monomers with six polar monomers. After tribological testing at 100 degrees C using the ball-on-flat geometry, the resulting tribochemical films were imaged using scanning electron microscopy (SEM) and optical microscopy. The resulting tribochemical films have thicknesses around 50-100 nm. Two of the films corresponding to small (P1-imidazole-containing copolymer) and large (P3-less polar homopolymer) wear were cross-sectioned using focused ion beam (FIB) and analyzed for elemental composition using energy-dispersive X-Ray (EDX) mapping. Oxygen and nitrogen enrichment was observed, consistent with the relative chemical composition of the precursor polymers. Transmission electron microscopy (TEM) evidence suggests that at the worn surface, some organic elements penetrate or are mixed into the steel substrate giving an interlocking appearance. The two samples examined with TEM showed that P1 tribofilm is diffused or mixed with the steel substrate more so than P3, suggesting a stronger affinity and contact during tribofilm formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

CALPHAD Uncertainty Quantification and TDBX

CALPHAD uncertainty quantification (UQ) is the foundation of materials design with quantified confidence. We report a framework and software packages to enable CALPHAD UQ assessment and calculation using commercial CALPHAD software (Thermo-Calc). This Bayesian inference framework is coupled with a Markov chain Monte Carlo algorithm to establish uncertainty traces with a given thermodynamic database file (TDB) and corresponding experimental data points. This general framework is demonstrated with the Ni–Cr binary system. The algorithm is firstly validated on synthetic data with known ground truth. Then it is applied to real experimental data to generate posterior traces. We develop a file format named TDBX, which provides a single source of truth by combining the original TDB content and the traces for each assessed Gibbs energy parameter. CALPHAD UQ calculations are performed based on the TDBX file, from which uncertainties for phase boundaries, enthalpy curves, and solidification range are collected as examples of basic design parameters. This TDBX file with corresponding scripts are made open-source. Finally, the combination of CALPHAD UQ assessments and calculations connected by TDBX supports uncertainty-assisted modeling, enabling the integrated application of modern design with uncertainty methodologies to computational materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Caloric Effects Induced by Uniform and Non-uniform Stress in Shape-Memory Materials

A Ginzburg–Landau model is developed that is adequate to describe a square-to-rectangle martensitic transition with associated shape-memory and superelastic properties. Using this model we study caloric effects in the vicinity of the martensitic transition induced by stress and we compare the case of a uniform uniaxial stress and the case of a non-uniform continuous distribution of stresses that produce bending of the material. The former case corresponds to an elastocaloric effect and the latter corresponds to a flexocaloric effect. The aim of the work is to quantitatively compare both cases, which we show must be accomplished in terms of equal amounts of exchanged mechanical work. It is then obtained that the flexocaloric effect is more efficient for low exchanged work but less efficient for large exchanged work.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electronic structural and lattice thermodynamic properties of MAlO2 and M5AlO4 (M = Li, Na, K) sorbents for CO2 capture applications

Abstract The electronic properties and thermal stabilities of MAlO 2 and M 5 AlO 4 (M = Li, Na, K) are investigated by density functional theory and lattice phonon dynamics. Based on the calculated electronic and lattice thermodynamic properties, their abilities to capture CO 2 as solid sorbents are analyzed. The calculated electronic structural properties of MAlO 2 and M 5 AlO 4 indicate that all these alkali aluminates are semiconductors with a bandgap range of 2.4 ~ 6.4 eV. The 1st valence bands of these alkali aluminates are located 0 ~ − 6 eV under Fermi levels and are mainly contributed by p orbitals of O, s and p orbitals of Al and M. The phonon vibrational frequencies of M 5 AlO 4 spread at a lower frequency range compared to their MAlO 2 phases. With increasing temperature, the calculated phonon free energies of M 5 AlO 4 decrease faster than their corresponding MAlO 2 while their entropies have opposite trends. The reaction 2MAlO 2 + CO 2 = M 2 CO 3 + Al 2 O 3 has higher reaction heat and Gibbs free energy change than those of corresponding reaction 2 / 5 M 5 AlO 4 + CO 2 = M 2 CO 3 + 1 / 5 Al 2 O 3 , which shows the former reaction possesses lower turnover temperature. Among the alkali aluminates studied, the β-NaAlO 2 , lt-KAlO 2 , and γ-LiAlO 2 are better candidates that could be applied for CO 2 capture technologies. Graphical Abstract

36 MATERIALS SCIENCE↗
DOE OSTI2024

Correlating real-world incidents with vessel traffic off the coast of Hawaii, 2017–2020

Abstract Objectives Because of the high-risk nature of emergencies and illegal activities at sea, it is critical that algorithms designed to detect anomalies from maritime traffic data be robust. However, there exist no publicly available maritime traffic data sets with real-world expert-labeled anomalies. As a result, most anomaly detection algorithms for maritime traffic are validated without ground truth. Data description We introduce the HawaiiCoast_GT data set, the first ever publicly available automatic identification system (AIS) data set with a large corresponding set of true anomalous incidents. This data set—cleaned and curated from raw Bureau of Ocean Energy Management (BOEM) and National Oceanic and Atmospheric Administration (NOAA) automatic identification system (AIS) data—covers Hawaii’s coastal waters for four years (2017–2020) and contains 88,749,176 AIS points for a total of 2622 unique vessels. This includes 208 labeled tracks corresponding to 154 rigorously documented real-world incidents.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Recent Advances in X-ray Absorption Near Edge Structure (XANES) Simulation for Catalysis: Theories and Applications

X-ray absorption spectroscopy (XAS) is a powerful spectroscopic technique for characterizing catalytic active sites. In particular, X-ray Absorption Near Edge Structure (XANES) provides insights into the oxidation state and local coordination environment of the absorbing atom, shedding light on the catalytic structure. Computational XANES simulations provide one-on-one correspondence between the molecular structure and their corresponding spectra, making them an effective approach for interpreting experimental XANES features. This work outlines various theories used to simulate XANES spectra and highlights recent advancements in computational XANES applications for homogeneous, heterogeneous, and single-atom catalysts focusing on identifying the active site structures, the site heterogeneity, and the dynamic evolution of catalysts.

Xu, Jiayi↗
DOE OSTI2025

Quantifying and visualizing the microscopic degrees of freedom of grain boundaries in the Wigner–Seitz cell of the displacement-shift-complete lattice

Here we introduce a grain boundary (GB) translation vector, t ws , to describe and quantify the domain of the microscopic degrees of freedom of GBs. It has long been recognized that for fixed macroscopic degrees of freedom of a GB there exists a large multiplicity of states characterized by different relative grain translations. More recently another degree of freedom, [n], the number of GB atoms, has emerged and is now recognized as an equally important component of GB structural multiplicity. In this work, we show that all GB microstates can be uniquely characterized by their value of t ws , which is located within the Wigner–Seitz (WS) cell of the Displacement-Shift-Complete lattice (DSCL) of the GB. The GB translation vector captures information about both the translation state and the number of GB atoms. We show that the density of GB microstates inside the WS cell of the DSCL is not uniform and can form clusters that correspond to different GB phases. Further, the vectors connecting the centers of the clusters correspond to the Burgers vectors of GB phase junctions, which can be predicted without building the junctions. Using t ws , we quantify GB excess shear and argue that it is defined up to a DSCL vector, which has implications for thermodynamic equilibrium conditions. Additionally, this work generalizes the definition of the number of GB atoms [n] to asymmetric boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Leveraging the digital thread for physics-based prediction of microstructure heterogeneity in additively manufactured parts

A major limitation of additive manufacturing (AM) processes is that local conditions of material deposition frequently lead to unintentional heterogeneities in microstructure and properties within a single component, despite nominally uniform process conditions. Up to now, there has been no way to a priori determine the distribution of these heterogeneities, requiring expensive trial-and-error approaches to fabrication, testing, and characterization. Here, a physics-based framework for creating a digital representation of the laser powder bed fusion (PBF) process is proposed to predict the variation in solidification behavior that leads to heterogeneous microstructures in an as-built part. By leveraging in situ process data stored in the part’s digital thread, the scan path and process parameters were input into a heat transfer model which predicted solidification data at the melt pool scale. A two-step unsupervised clustering algorithm was used to first cluster the local solidification conditions (12.5µm 3 voxels) and then to cluster the regional behavior on the scale of multiple scan passes and print layers (250µm 3 super-voxels). This process was used to identify regions with similar solidification characteristics for multiple locations in a Stainless Steel 316-L component. The corresponding as-built part was sectioned and characterized using electron backscatter diffraction (EBSD). Quantitative analysis of the pole figures confirmed that the predicted regions of heterogeneity in the solidification conditions corresponded with differences in the observed microstructure. In conclusion, this work shows a viable path for estimating the microstructural heterogeneity for additively manufactured parts to either limit microstructural variation throughout a part or to enable functionality-based variation of the microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A hybrid porous model for full reactor core scale CFD investigation of a prismatic HTGR

Three-dimensional (3-D) Computational Fluid Dynamics (CFD) analysis of a whole nuclear reactor core is a tremendous challenge due to the large geometric volume and complex structures. Here, this research presents a hybrid porous (HP) model to simplify a prismatic High Temperature Gas-cooled Reactor (HTGR) core, so 3-D CFD investigation can be performed on a full reactor core scale. In the HP model, the prototypic small coolant channels in the nuclear fuel blocks are lumped together to form multiple equivalent large coolant channels, and then the porous medium flow model is applied to each of them. Therefore, heat transfer in fuel blocks is computed by a hybrid combination of solid energy and porous flow energy equations. The similarity between the HP model and prototypic model is achieved by deriving the porous flow permeability, inertial resistance factor, and artificial thermophysical properties. Compared with the widely used whole porous (WP) flow model, the HP model preserves more realistic geometric structures, and therefore more accurate physical processes. The General Atomics' Modular High Temperature Gas-cooled Reactor (MHTGR) design was chosen as a prototype to demonstrate the methodology. Simulations were performed using the prototypic CFD model and HP model at steady-state forced circulation, steady-state natural circulation, and transient conditions that correspond to normal operation, extended period of pressurized cool down, and short-term transients after reactor shutdown, respectively. The comparison shows good agreement between the HP model and prototypic model in the maximum fuel temperature, average solid temperature, and helium flow rate, which demonstrates the potential applicability of the HP model for a full reactor core scale simulation in the future. As a benefit, the HP model reduces the mesh quantity by a factor of 50 from a prototypic model. Correspondingly, the computation time was reduced by a factor of at least 30.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗