Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corporate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Orbit Modelling for Satellites Using the NASA Prediction Bulletins

For some satellites the NASA Prediction Bulletins are the only means available to the general user for obtaining orbital information. A computational interface between the information given in the NASA Prediction Bulletins and standard orbit determination programs is provided. Such an interface is necessary to obtain accurate orbit predictions. The theoretical considerations and their computational verification in this interface modelling are presented. This analysis was performed in conjunction with satellite aided search and rescue position location experiments where accurate orbits of the Amateur Satellite Corporation (AMSAT) OSCAR-6 and OSCAR-7 spacecraft are a prerequisite.

Bonavito, N. L.↗
NASA NTRS1975

International Ultraviolet Explorer (IUE) satellite mission analysis

The results are presented of the mission analysis performed by Computer Sciences Corporation (CSC) in support of the International Ultraviolet Explorer (IUE) satellite. The launch window is open for three separate periods (for a total time of 7 months) during the year extending from July 20, 1977, to July 20, 1978. The synchronous orbit shadow constraint limits the launch window to approximately 88 minutes per day. Apogee boost motor fuel was computed to be 455 pounds (206 kilograms) and on-station weight was 931 pounds (422 kilograms). The target orbit is elliptical synchronous, with eccentricity 0.272 and 24 hour period.

Cook, R. A.↗
NASA NTRS1976

Investigation of selected disk systems

The large disk systems offered by IBM, UNIVAC, Digital Equipment Corporation, and Data General were examined. In particular, these disk systems were analyzed in terms of how well available operating systems take advantage of the respective disk controller's transfer rates, and to what degree all available data for optimizing disk usage is effectively employed. In the course of this analysis, generic functions and components of disk systems were defined and the capabilities of the surveyed disk system were investigated.

Source record↗
NASA NTRS1976

Analysis of the Learjet 35/36 Wing and Correlation with Experimental Results

Two NASTRAN models of the Gates Learjet Corporation Model 35/36 Wing were developed. The models and the problems encountered in their development are discussed. A skin buckling analysis used for the ultimate loading conditions is presented. A discussion of the static tests and the correlation of the static test with the NASTRAN results and the results of a supplementary semimonocoque beam analysis are also included.

Abla, M. H.↗
NASA NTRS1977

Backup flight control system functional evaluator software manual

The software for the Backup Flight Control System Functional Evaluator (BFCSFE) on a Data General Corporation Nova 1200 computer consists of three programs: the ground support program, the operational flight program (OFP), and the ground pulse code modulation (PCM) program. The Nova OFP software is structurally as close as possible to the AP101 code; therefore, this document highlights and describes only those areas of the Nova OFP that are significantly different from the AP101. Since the Ground Support Program was developed to meet BFCSFE requirements and differs considerably from the AP101 code, it is described in detail.

Helmke, C. A.↗
NASA NTRS1977

Evaluation of NASA-sponsored research on capital investment decision making in the civil aviation industry

Significant findings of three studies undertaken to provide the NASA Aircraft Energy Efficiency (ACEE) Office with information regarding how aircraft manufacturers and commercial airlines make investment decisions concerning the acquisition of new and derivative technology are analyzed and their general implications explored. Topics discussed include: the market for airline aircraft, factors affecting the corporate decision making process of air transport manufacturers, and flight equipment purchasing practices of representative air carriers.

Donovan, D. J.↗
NASA NTRS1977

Space industrialization studies - An overview

An overview of NASA's current planning for a space industrialization program is described as an introduction to the papers on Space Industrialization being presented by Rockwell International Corporation and Science Applications Incorporated. Background information is presented that outlines the integrated planning process which resulted in specific long range goals and objectives being formulated for NASA programs in technology, environment, resources, earth science, communications, space exploration, aeronautics, and an expanded application of space called space industrialization. Program objectives for NASA's Industrialization of Space and studies on potential near term supporting elements (Space Platform, Large Space Structures, Orbital Operations Capabilities Development, Space Manufacturing Module) are discussed.

Priest, C.↗
NASA NTRS1977

Theoretical study of hull-rotor aerodynamic interference on semibuoyant vehicles

Theoretical methods are being developed to predict the mutual interference between rotor wakes and the hull for semibuoyant vehicles. The objective of the investigation is to predict the pressure distribution and overall loads on the hull in the presence of rotors whose locations, tilt angles, and disk loading are arbitrarily specified. The methods involve development of potential flow models for the hull alone in a nonuniform onset flow, a rotor wake which has the proper features to predict induced flow outside the wake, and a wake centerline specification technique which accounts for the reactions of the wake to a nonuniform crossflow. The flow models are used in sequence to solve for the mutual influence of the hull and rotor(s) on each other and the resulting loads. A flow separation model is included to estimate the influence of separation on hull loads at high sideslip angles. Only limited results have been obtained to date. These were obtained on a configuration which was tested in the Ames Research Center 7- by 10-Foot Low Speed Tunnel under Goodyear Aircraft Corporation sponsorship and indicate the nature of the interference pressure distribution on a configuration in hover.

Spangler, S. B.↗
NASA NTRS1976

Improvements in search and rescue distress alerting and locating using satellites

This paper describes a system concept for search and rescue which is capable of making a major contribution to saving lives and reducing the search time for downed aircraft. In addition, a beacon location experiment is described using the Amateur Radio Satellite Corporation Oscar-6 and Oscar-7 spacecraft. The purpose of this experiment was to demonstrate the system concept above by determining the geographical location of a low power 'distress beacon' via satellite based on a single pass of Doppler frequency measurements. Preliminary results are presented showing beacon location recovery on the order of 10 km with indications that an order of magnitude improvement is entirely possible. This experiment is in support of NASA's current exploration into the role satellites might play in providing much needed improvements in the reliability, coverage and accuracy of present search and rescue procedures.

Brandel, D. L.↗
NASA NTRS1976

Laser velocimeter turbulence spectra measurements

A unique laser velocimeter system employing a digital-frequency-counter has been developed by the General Electric Company's Corporate Research and Development under sponsorship of NASA/Langley. This system has been successfully developed for measurements of turbulence spectra in jet exhaust flows. This paper describes the LV spectra data acquisition system and discussions on the important parameters in the spectra analysis procedure. Results from computer simulation and actual jet flow tests are reported. Reasonable agreement was obtained between the experimental measurements and the predictions from error analysis of the LV processor.

Wang, J. C. F.↗
NASA NTRS1977

Remote beacon location from a single satellite pass

This paper describes the techniques and associated dedicated hardware utilized in locating remote beacons via satellites. Applications include those associated with a 'distress' situation or for monitoring the location of floating data collection platforms. Results obtained from experiments involving the NASA Nimbus-6 and the Amateur Satellite Corporation (AMSAT) OSCAR spacecrafts indicate position accuracies on the order of one and two kilometers are possible. The geographical location of a low power VHF transmitter is determined from Doppler data collected during a single satellite pass. A dedicated microcomputer utilizes an efficient algorithm to provide beacon position coordinates within a minute after the end of the satellite pass.

Lynn, J. J.↗
NASA NTRS1976

Single pass Doppler positioning for Search and Rescue satellite missions

This paper describes the implementation of beacon location experiments involving the NASA Nimbus-6 and the Amateur Satellite Corporation (AMSAT) Oscar-6 and Oscar-7 spacecraft. The purpose of these experiments is to demonstrate the feasibility of determining the geographical location of a low power VHF 'distress beacon' via satellite. Doppler data collected during satellite passes is reduced in a mini-computer by means of a simple algorithm resulting in the simultaneous recovery of the unknown receiver coordinates and the unknown Doppler bias frequency. Results indicate point positioning to within a few kilometers - which is within the required accuracies for the positioning of downed aircraft for Search/Rescue missions.

Schmid, P. E.↗
NASA NTRS1977

Rocketdyne's advanced coal slurry pumping program

The Rocketdyne Division of Rockwell International Corporation is conducting a program for the engineering, fabrication, and testing of an experimental/prototype high-capacity, high-pressure centrifugal slurry feed pump for coal liquefaction purposes. The abrasion problems in a centrifugal slurry pump are primarily due to the manner in which the hard, solid particles contained in the slurry are transported through the hydraulic flow passages within the pump. The abrasive particles can create scraping, grinding, cutting, and sandblasting effects on the various exposed parts of the pump. These critical areas involving abrasion and impact erosion wear problems in a centrifugal pump are being addressed by Rocketdyne. The mechanisms of abrasion and erosion are being studied through hydrodynamic analysis, materials evaluation, and advanced design concepts.

Davis, D. E.↗
NASA NTRS1977

Shuttle Experimental Radar for Geological Exploration (SERGE); antenna and integration concept definition study

The baseline configuration defined has the SERGE antenna panel array mounted on the OFT-2 pallet sufficiently high in the bay that negligible amounts of radiation from the beam are reflected from orbiter surfaces into the shuttle payload bay. The array is symmetrically mounted to the pallet along the array long dimension with the pallet at the center. It utilizes a graphite epoxy trusswork support structure. The antenna panels are of SEASAT engineering model design and construction. The antenna array has 7 panels and a 7-way naturally tapered coax corporate feed system. The performance of the system is predicted to exceed 33 db gain, have -15 db sidelobes in the E-plane and even lower in the H-plane, and have and E-plane beamwidth less than 2.2 deg, all within performance specification. The primary support structure is predicted to exceed the specified greater than 25 hertz fundamental frequency, although individual panels will have hertz fundamental frequency.

Kierein, J. W.↗
NASA NTRS1978

SIMS prototype system 1 test results: Engineering analysis

The space and domestic water solar heating system designated SIMS Prototype Systems 1 was evaluated. The test system used 720 ft (gross) of Solar Energy Products Air Collectors, a Solar Control Corporation SAM 20 Air Handler with Model 75-175 control unit, a Jackson Solar Storage tank with Rho Sigma Mod 106 controller, and 20 tons of rack storage. The test data analysis performed evaluates the system performance and documents the suitability of SIMS Prototype System 1 hardware for field installation.

Source record↗