SEARCH · Engineering Papers

Results for “core”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS2011

Experimental Results of Rover-Based Coring and Caching

Experimental results are presented for experiments performed using a prototype rover-based sample coring and caching system. The system consists of a rotary percussive coring tool on a five degree-of-freedom manipulator arm mounted on a FIDO-class rover and a sample caching subsystem mounted on the rover. Coring and caching experiments were performed in a laboratory setting and in a field test at Mono Lake, California. Rock abrasion experiments using an abrading bit on the coring tool were also performed. The experiments indicate that the sample acquisition and caching architecture is viable for use in a 2018 timeframe Mars caching mission and that rock abrasion using an abrading bit may be feasible in place of a dedicated rock abrasion tool.

coring↗

NASA NTRS2014

Core and Wing Densities of Asymmetric Coronal Spectral Profiles: Implications for the Mass Supply of the Solar Corona

Recent solar spectroscopic observations have shown that coronal spectral lines can exhibit asymmetric profiles, with enhanced emissions at their blue wings. These asymmetries correspond to rapidly upflowing plasmas at speeds exceeding approximately equal to 50 km per sec. Here, we perform a study of the density of the rapidly upflowing material and compare it with that of the line core that corresponds to the bulk of the plasma. For this task, we use spectroscopic observations of several active regions taken by the Extreme Ultraviolet Imaging Spectrometer of the Hinode mission. The density sensitive ratio of the Fe(sub XIV) lines at 264.78 and 274.20 Angstroms is used to determine wing and core densities.We compute the ratio of the blue wing density to the core density and find that most values are of order unity. This is consistent with the predictions for coronal nanoflares if most of the observed coronal mass is supplied by chromospheric evaporation driven by the nanoflares. However, much larger blue wing-to-core density ratios are predicted if most of the coronal mass is supplied by heated material ejected with type II spicules. Our measurements do not rule out a spicule origin for the blue wing emission, but they argue against spicules being a primary source of the hot plasma in the corona. We note that only about 40% of the pixels where line blends could be safely ignored have blue wing asymmetries in both Fe(sub XIV) lines. Anticipated sub-arcsecond spatial resolution spectroscopic observations in future missions could shed more light on the origin of blue, red, and mixed asymmetries.

coronal spectral profiles↗

NASA NTRS2015

An Assessment of Southern Ocean Water Masses and Sea Ice During 1988-2007 in a Suite of Interannual CORE-II Simulations

We characterise the representation of the Southern Ocean water mass structure and sea ice within a suite of 15 global ocean-ice models run with the Coordinated Ocean-ice Reference Experiment Phase II (CORE-II) protocol. The main focus is the representation of the present (1988-2007) mode and intermediate waters, thus framing an analysis of winter and summer mixed layer depths; temperature, salinity, and potential vorticity structure; and temporal variability of sea ice distributions. We also consider the interannual variability over the same 20 year period. Comparisons are made between models as well as to observation-based analyses where available. The CORE-II models exhibit several biases relative to Southern Ocean observations, including an underestimation of the model mean mixed layer depths of mode and intermediate water masses in March (associated with greater ocean surface heat gain), and an overestimation in September (associated with greater high latitude ocean heat loss and a more northward winter sea-ice extent). In addition, the models have cold and fresh/warm and salty water column biases centred near 50 deg S. Over the 1988-2007 period, the CORE-II models consistently simulate spatially variable trends in sea-ice concentration, surface freshwater fluxes, mixed layer depths, and 200-700 m ocean heat content. In particular, sea-ice coverage around most of the Antarctic continental shelf is reduced, leading to a cooling and freshening of the near surface waters. The shoaling of the mixed layer is associated with increased surface buoyancy gain, except in the Pacific where sea ice is also influential. The models are in disagreement, despite the common CORE-II atmospheric state, in their spatial pattern of the 20-year trends in the mixed layer depth and sea-ice.

Sea ice↗

NASA NTRS2017

Challenges Regarding IP Core Functional Reliability

For many years, intellectual property (IP) cores have been incorporated into field programmable gate array (FPGA) and application specific integrated circuit (ASIC) design flows. However, the usage of large complex IP cores were limited within products that required a high level of reliability. This is no longer the case. IP core insertion has become mainstream including their use in highly reliable products. Due to limited visibility and control, challenges exist when using IP cores and subsequently compromise product reliability. We discuss challenges and suggest potential solutions to critical application IP insertion.

IP cores↗

NASA NTRSDate not supplied

The Impact of Packaging on Soft Magnetic Core Performance

Soft magnetic cores are rarely used in application without packaging. The packaging mechanically integrates the core into the rest of the design and can support other external forces such as winding stress. Material data sheets typically offer core performance in an unstressed environment, that represents a best-case scenario for materials with non-zero magnetostriction. This work will show the impact of various packaging solutions on core properties as well as best practices, both material and packaging design. A particular emphasis will be placed on packaging solutions for aerospace applications.

Magnetic Cores↗

NASA NTRS1971

Performance potential of gas-core and fusion rockets - A mission applications survey.

This paper reports an evaluation of the performance potential of five nuclear rocket engines for four mission classes. These engines are: the regeneratively cooled gas-core nuclear rocket; the light bulb gas-core nuclear rocket; the space-radiator cooled gas-core nuclear rocket; the fusion rocket; and an advanced solid-core nuclear rocket which is included for comparison. The missions considered are: earth-to-orbit launch; near-earth space missions; close interplanetary missions; and distant interplanetary missions. For each of these missions, the capabilities of each rocket engine type are compared in terms of payload ratio for the earth launch mission or by the initial vehicle mass in earth orbit for space missions (a measure of initial cost). Other factors which might determine the engine choice are discussed. It is shown that a 60 day manned round trip to Mars is conceivable.-

Fishbach, L. H.↗

NASA NTRS1972

Evolution of stars with suppressed core convection

Stellar evolution on the upper main sequence was computed for models of stars with cores assumed to be in radiative equilibrium, up to the point of central helium ignition. The role of the Schonberg-Chandrasekhar limit for an isothermal core is found to be critical for the evolutionary tracks. Observational data are used to rule out the hypothesis of evolution with radiative cores (in upper main-sequence stars) and, by implication, of magnetic fields that are sufficiently strong to have suppressed the core convention.

Stothers, R. B.↗

NASA NTRS1972

The theoretical output of a ring core fluxgate sensor.

Demonstration that the output from a ring core sensor is directly proportional to the first time derivative of the product of dynamic permeability and magnetic intensity perturbation within the core caused by an external, uniform magnetic field. (Dynamic permeability is defined to be the slope of the hysteresis loop at a given point in time). Assuming that ellipsoidal shells can approximate the core, the demagnetization factor can be 'estimated' in the first order to be proportional to the first power of the quantity tape thickness (or number of wraps) divided by the core diameter. The constant of proportionality is determined from laboratory data. When an additional scale adjustment is applied to the resulting sensor output formula, the computed output tracks laboratory data for a range of sensor geometries.

Burger, J. R.↗

NASA NTRS1973

Evolution of stars with suppressed core convection.

Stellar evolution on the upper main sequence has been computed for models of stars with cores assumed to be in radiative equilibrium, up to the point of central helium ignition. The role of the Schoenberg-Chandrasekhar limit for an isothermal core is found to be critical for the evolutionary tracks. Observational data are used to rule out the hypothesis of evolution with radiative cores (in upper main-sequence stars) and, by implication, of magnetic fields that are sufficiently strong to have suppressed the core convection.

Stothers, R.↗

NASA NTRS1972

The origin and chemical composition of the earth's core

The process of core formation in the earth is subject to the constraints that it be nearly simultaneous with accretion and yet occur in a manner that the mantle retains radiogenic Xe-129 produced from the extinct radioactivity of I-129 with a half life of 17.6 million y. From these constraints, it appears that the only feasible mechanism is the segregation of an Fe-FeS melt. Trace element abundances in major classes of meteorites and the silicate fractions of the earth show that not only there is a high depletion of sulphur in the crust and the mantle, but that it is even more highly depleted than the rare gases, water and the halogens. From the nature of this depletion pattern and the fact that any model of accretion of the earth will necessarily produce an Fe-FeS melt, it is concluded that the light element in the core is largely sulphur with minor amounts of carbon. A consequence of this mode of core formation is found to be the availability of K-40 radioactive heat production in the liquid core, estimated at about 10 to the 19th power erg/s at the present time.

Murthy, V. R.↗

NASA NTRS1974

Interim prediction method for low frequency core engine noise

A literature survey on low-frequency core engine noise is presented. Possible sources of low frequency internally generated noise in core engines are discussed with emphasis on combustion and component scrubbing noise. An interim method is recommended for predicting low frequency core engine noise that is dominant when jet velocities are low. Suggestions are made for future research on low frequency core engine noise that will aid in improving the prediction method and help define possible additional internal noise sources.

Huff, R. G.↗

NASA NTRS1974

Applications of plasma core reactors to terrestrial energy systems

Plasma core reactors offer several new options for future energy needs in addition to space power and propulsion applications. Power extraction from plasma core reactors with gaseous nuclear fuel allows operation at temperatures higher than conventional reactors. Highly efficient thermodynamic cycles and applications employing direct coupling of radiant energy are possible. Conceptual configurations of plasma core reactors for terrestrial applications are described. Closed-cycle gas turbines, MHD systems, photo- and thermo-chemical hydrogen production processes, and laser systems using plasma core reactors as prime energy sources are considered. Cycle efficiencies in the range of 50 to 65 percent are calculated for closed-cycle gas turbine and MHD electrical generators. Reactor advantages include continuous fuel reprocessing which limits inventory of radioactive by-products and thorium-U-233 breeder configurations with about 5-year doubling times.-

Latham, T. S.↗

NASA NTRS1976

Does Mercury have a molten core

The question of whether or not Mercury could contain a molten metallic core is investigated by studying the possible thermal evolution of a metallic core in that planet. The calculations involve the solution of the equation of heat conduction for a spherically symmetric body with internal heat sources, modifications to take account of the latent heat of fusion as well as the redistribution of radioactive heat sources as a consequence of melting, the terrestrial Fe/U ratio, and a Th/U ratio of 3.7. The temperature profile predicted by the calculations for a period of 4.6 billion years indicates that the inner 1400 km of the core would now be solid while the outer 500 km would be molten. It is emphasized that this result is a direct consequence of a discontinuity in melting temperatures at the core-mantle boundary and that although a dynamo is possible, it would have to be driven mechanically rather than by thermal convection.

Fricker, P. E.↗

NASA NTRS1976

Core noise source diagnostics on a turbofan engine using correlation and coherence techniques

Fluctuating pressure measurements at several locations within the core of a turbofan engine were made simultaneously with far field acoustic measurements. Correlation and coherence techniques were used to determine the relative amplitude and phase relationships between core pressures at these various locations and between the core pressures and far field acoustic pressure. The combustor is a low frequency source region for acoustic propagation through the core nozzle and out to the far field. The relation between source pressure and the resulting sound pressure involves a 180 degree phase shift and an amplitude transfer function which varies approximately as frequency squared. This is consistent with a simplified model using fluctuating entropy as a source term.

Karchmer, A. M.↗

NASA NTRS1976

Simplifier cut core inductor design

Advantages of specifying C cores and cut toroids fabricated from grain oriented silicon steels for use in high frequency power converters and pulse width modulated switching regulators are discussed. A method for rating cores assigns to each core a number which is the product of its window and core cross section area, called 'Area Product A sub p.' A correlation between the A sub p numbers and current density for a given temperature rise was developed. Also, straight line relationships were developed for A sub p and volume, A sub p and surface area, and A sub p and weight. These relationships can be used to simplify and standardize the process of inductor design. They also make it possible to design inductors of small bulk and volume or to optimize efficiency.

Mclyman, W. T.↗

NASA NTRS1977

Aero-acoustic performance comparison of core engine noise suppressors on NASA quiet engine C

The relative aero-acoustic effectiveness of two core engine suppressors, a contractor-designed suppressor delivered with the Quiet Engine, and a NASA-designed suppressor was evaluated. The NASA suppressor was tested with and without a splitter making a total of three configurations being reported in addition to the baseline hardwall case. The aerodynamic results are presented in terms of tailpipe pressure loss, corrected net thrust, and corrected specific fuel consumption as functions of engine power setting. The acoustic results are divided into duct and far-field acoustic data. The NASA-designed core suppressor did the better job of suppressing aft end noise, but the splitter associated with it caused a significant engine performance penality. The NASA core suppressor without the spltter suppressed most of the core noise without any engine performance penalty.

Bloomer, H. E.↗

NASA NTRS1977

A spin-orbit constraint on the viscosity of a Mercurian liquid core

The escape of Mercury from the stable spin-orbit resonance in which the spin angular velocity is twice the orbital mean motion (2n) requires that the kinematic viscosity of a molten core with a laminar boundary layer be comparable to that of water (0.01 sq cm/s) and the tidal Q be less than about 100. If the boundary layer is turbulent, escape from the resonance is only consistent with a liquid core of low viscosity if the critical Reynolds number for the onset of turbulence is above about 500, the moment difference (B - A)/C is below about 0.00001, and the tidal dissipation factor Q is less than about 40. These conclusions depend on the assumptions that Mercury's obliquity was near 0 deg at the time of resonance passage, that the liquid core was not stably stratified at the time at which Mercury passed through the resonance, that a turbulent boundary layer can be characterized by a turbulent or eddy viscosity coefficient, and that the most important coupling between core and mantle is a viscous coupling at a smooth spherical boundary.

Peale, S. J.↗

NASA NTRS1976

The Apollo 16 drill core - Modal petrology and characterization of the mineral and lithic component

A string of 59 polished thin sections covering the length of the Apollo 16 deep drill core has been examined. A modal analysis, involving the optical classification of 116,000 points was made, and over 500 mineral and lithic fragments from the core were chemically analyzed using an electron microprobe. These data were used to identify and characterize the source areas of the core material and to reconstruct the accumulation history of the core.

Vaniman, D. T.↗