Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “condensed phase systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Shunt-Connected FACTS and Synchronous Condensers

In recent years, the electric-transmission system has undergone a significant transformation marked by a greater integration of renewable-energy sources like wind and solar, the phasing out of thermal generation plants, and a concerted effort towards electrifying energy consumption. To keep pace with the integration of renewable-energy sources and the escalating demands of industries and households, it is imperative to expand and modernize the existing power infrastructure. These upgrades are essential to maintain grid stability, enhance power delivery, and boost overall efficiency of the system. However, challenges have emerged with the growing complexity of power grids, particularly in the realms of voltage control, transient stability, and power-quality management.

24 - POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Antiferromagnetic transitions of Dirac fermions in three dimensions

We use determinant quantum Monte Carlo simulations to study the role of electron-electron interactions on three-dimensional (3D) Dirac fermions based on the π-flux model on a cubic lattice. We show that the Hubbard interaction drives the 3D Dirac semimetal to an antiferromagnetic (AF) insulator only above a finite critical interaction strength and the long-range AF order persists up to a finite temperature. We evaluate the critical interaction strength and temperatures using finite-size scaling of the spin structure factor. The critical behaviors are consistent with the (3+1)-dimensional Gross-Neveu universality class for the quantum critical point and 3D Heisenberg universality class for the thermal phase transitions. We further investigate correlation effects in the birefringent Dirac fermion system. It is found that the critical interaction strength U c is decreased by reducing the velocity of the Dirac cone, quantifying the effect of velocity on the critical interaction strength in 3D Dirac fermion systems. Our findings unambiguously uncover correlation effects in 3D Dirac fermions and may be observed using ultracold atoms in an optical lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Strain-tuned quantum criticality in electronic Potts-nematic systems

Motivated by recent observations of threefold rotational symmetry breaking in twisted moiré systems, cold-atom optical lattices, quantum Hall systems, and triangular antiferromagnets, we phenomenologically investigate the strain-temperature phase diagram of the electronic 3-state Potts-nematic order. While in the absence of strain the quantum Potts-nematic transition is first-order, quantum critical points (QCP) emerge when uniaxial strain is applied, whose nature depends on whether the strain is compressive or tensile. In one case, the nematic amplitude jumps between two non-zero values while the nematic director remains pinned, leading to a symmetry-preserving metanematic transition that terminates at a quantum critical end-point. For the other type of strain, the nematic director unlocks from the strain direction and spontaneously breaks an in-plane twofold rotational symmetry, which in twisted moiré superlattices triggers an electric polarization. Such a piezoelectric transition changes from first to second-order upon increasing strain, resulting in a quantum tricritical point. Using a Hertz-Millis approach, we show that these QCPs share interesting similarities with the widely studied Ising-nematic QCP. The existence of three minima in the nematic action also leaves fingerprints in the strain-nematic hysteresis curves, which display multiple loops. At non-zero temperatures, because the upper critical dimension of the 3-state Potts model is smaller than three, the Potts-nematic transition is expected to remain first-order in 3D, but to change to second-order in 2D. As a result, the 2D strain-temperature phase diagram displays two first-order transition wings bounded by lines of critical end-points or tricritical points, reminiscent of the phase diagram of metallic ferromagnets. Furthermore, we discuss how our results can be used to unambiguously identify spontaneous Potts-nematic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Avalanches and many-body resonances in many-body localized systems

Here we numerically study both the avalanche instability and many-body resonances in strongly disordered spin chains exhibiting many-body localization (MBL). Finite-size systems behave like MBL within the MBL regimes, which we divide into the asymptotic MBL phase and the finite-size MBL regime; the latter regime is, however, thermal in the limit of large systems and long times. In both Floquet and Hamiltonian models, we identify some landmarks within the MBL regimes. Our first landmark is an estimate of where the MBL phase becomes unstable to avalanches, obtained by measuring the slowest relaxation rate of a finite chain coupled to an infinite bath at one end. Our estimates indicate that the actual MBL-to-thermal phase transition occurs much deeper in the MBL regimes than has been suggested by most previous studies. Our other landmarks involve systemwide many-body resonances: We find that the effective matrix elements producing eigenstates with systemwide many-body resonances are enormously broadly distributed. This broad distribution means that the onset of such resonances in typical samples occurs quite deep in the MBL regimes, and the first such resonances typically involve rare pairs of eigenstates that are farther apart in energy than the minimum gap. Thus we find that the resonance properties define two landmarks that divide the MBL regimes of finite-size systems into three subregimes: (i) at strongest randomness, typical samples do not have any eigenstates that are involved in systemwide many-body resonances; (ii) there is a substantial intermediate subregime where typical samples do have such resonances but the pair of eigenstates with the minimum spectral gap does not, so the size of the minimum gap agrees with expectations from Poisson statistics; and (iii) in the weaker randomness subregime, the minimum gap is larger than predicted by Poisson level statistics because it is involved in a many-body resonance and thus subject to level repulsion. Nevertheless, even in this third subregime, all but a vanishing fraction of eigenstates remain nonresonant and the system thus still appears MBL in most respects. Based on our estimates of the location of the avalanche instability, it might be that the MBL phase is only part of subregime (i) and the other subregimes are entirely in the thermal phase, even though they look localized in most respects, so are in the finite-size MBL regime.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Capillary Pumped Loop 3 Flight Experiment Overview

The Capillary Pumped Loop 3 (CAPL 3) Experiment is a follow on to the CAPL 1 and CAPL 2 experiments which flew on STS-60 (2/94) and STS-69 (9/95), respectively. CAPL 3 is tentatively scheduled to fly on the Space Shuttle in late 2000 as part of the Hitchhiker Experiments Advancing Technology (HEAT) payload. The experiment is a joint Naval Research Laboratory (NRL)/Goddard Space Flight Center (GSFC) payload which will meet technology objectives for both the Department of Defense and NASA. The primary objective of CAPL 3 is to demonstrate in space a multiple evaporator capillary pumped loop system, capable of reliable start-up, reliable continuous operation, and at least 50% heat load sharing with hardware for a deployable radiator. CAPL 3 is a full scale CPL system with four parallel capillary evaporators. The loop also contains a capillary starter pump, 8 parallel direct condensation condensers with associated flow regulators, a back pressure regulator, a two-phase reservoir, and various headers and transport tubing. A variable conductance heat pipe is located between one of the evaporators and the experiment radiator to provide a cooling source for the demonstration of heat load sharing. The experiment has an operating power range of 100 W to approximately 1400 W. The experiment ammonia charge will cause it to transition to a fixed conductance mode of operation if the radiator usage reaches 85%. Ambient functional tests have been performed on the experiment. Tests performed included start-up, low power, power cycles, high power, heat load sharing, variable/fixed conductance transition, saturation temperature changes, and pressure primes while the system was operating. The majority of the testing was performed at an ammonia saturation temperature of 30C, but a few tests were done at temperatures above and below this. The testing was highly successful. Details of the tests performed and a discussion of the results will be given in the presentation.

Ottenstein, Laura↗
DOE OSTI2019

Colloquium: Ice rule and emergent frustration in particle ice and beyond

Geometric frustration and the ice rule are two concepts that are intimately connected and widespread across condensed matter. The first refers to the inability of a system to satisfy competing interactions in the presence of spatial constraints. The second, in its more general sense, represents a prescription for the minimization of the topological charges in a constrained system. Both can lead to manifolds of high susceptibility and nontrivial, constrained disorder where exotic behaviors can appear and even be designed deliberately. This Colloquium describes the emergence of geometric frustration and the ice rule in soft condensed matter. It excludes the extensive developments of mathematical physics within the field of geometric frustration, but rather focuses on systems of confined microscopic or mesoscopic particles that emerge as a novel paradigm exhibiting spin degrees of freedom. In such systems, geometric frustration can be engineered artificially by controlling the spatial topology and geometry of the lattice, the position of the individual particle units, or their relative filling fraction. These capabilities enable the creation of novel and exotic phases of matter and also potentially lead toward technological applications related to memory and logic devices that are based on the motion of topological defects. The rapid progress in theory and experiments is reviewed and the intimate physical connections with other frustrated systems at different length scales are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

High pressure phase transition and strength estimate in polycrystalline alumina during laser-driven shock compression

Alumina (Al 2 O 3 ) is an important ceramic material notable for its compressive strength and hardness. It represents one of the major oxide components of the Earth's mantle. Static compression experiments have reported evidence for phase transformations from the trigonal α-corundum phase to the orthorhombic Rh 2 O 3 (II)-type structure at ~90 GPa, and then to the post-perovskite structure at ~130 GPa, but these phases have yet to be directly observed under shock compression. In this work, we describe laser-driven shock compression experiments on polycrystalline alumina conducted at the Matter in Extreme Conditions endstation of the Linac Coherent Light Source. Ultrafast x-ray pulses (50 fs, 10 12 photons/pulse) were used to probe the atomic-level response at different times during shock propagation and subsequent pressure release. At 107 ± 8 GPa on the Hugoniot, we observe diffraction peaks that match the orthorhombic Rh 2 O 3 (II) phase with a density of 5.16 ± 0.03 g cm –3 . Upon unloading, the material transforms back to the α-corundum structure. Upon release to ambient pressure, densities are lower than predicted assuming isentropic release, indicating additional lattice expansion due to plastic work heating. Furthermore, using temperature values calculated from density measurements, we provide an estimate of alumina's strength on release from shock compression.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Momentum-resolved analysis of condensate dynamic and Higgs oscillations in quenched superconductors with time-resolved ARPES

Higgs oscillations in nonequilibrium superconductors provide a unique tool to obtain information about the underlying order parameter. Several properties like the absolute value, existence of multiple gaps, and the symmetry of the order parameter can be encoded in the Higgs oscillation spectrum. Studying Higgs oscillations with time-resolved angle-resolved photoemission spectroscopy (ARPES) has the advantage over optical measurements that a momentum-resolved analysis of the condensate dynamic is possible. In this paper, we investigate the time-resolved spectral function measured in ARPES for different quench protocols. We find that analyzing amplitude oscillations of the ARPES intensity in the whole Brillouin zone allows to understand how the condensate dynamic contributes to the emerging of collective Higgs oscillations. Furthermore, by evaluating the phase of these oscillations, the symmetry deformation dynamic of the condensate can be revealed, which gives insight about the ground state symmetry of the system. With such an analysis, time-resolved ARPES experiments might be used in the future as a powerful tool in the field of Higgs spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Jet Substructure in Fireworks Emission from Nonuniform and Rotating Bose-Einstein Condensates

Here, we show that jet emission from a Bose condensate with periodically driven interactions, also known as “Bose fireworks”, contains essential information on the condensate wave function, which is difficult to obtain using standard detection methods. We illustrate the underlying physics with two examples. When condensates acquire phase patterns from external potentials or from vortices, the jets display novel substructure, such as oscillations or spirals, in their correlations. Through a comparison of theory, numerical simulations, and experiments, we show how one can quantitatively extract the phase and the helicity of a condensate from the emission pattern. Our work, demonstrating the strong link between jet emission and the underlying quantum system, bears on the recent emphasis on jet substructure in particle physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Suggestions on the Vapor Pressure Determination of Molten Salts

The knowledge of the thermophysical properties of coolant and fuel in molten salts nuclear reactors (MSRs), such as thermal stability and vapor pressure, are of remarkable interest, particularly for simulating safe reactor operations. Molten salt reactorsMSRs use molten salt mixtures as the primary coolant and/or fuel and are expected to operate up to 800 °C. With the revival of interest in deploying MSRs, complete thermophysical and thermochemical characterization of these materials is of interest to industry, regulators, and researchers. Vapor pressure data for molten salts are scarce in the literature, both for pure salts but especially for eutectic mixtures. This report describes the effusion method, which consist of measuring the rate of escape of vapor molecules through a small orifice for the determination of the vapor pressure of compounds and may be useful on compounds such as molten salts. Thermogravimetric analysis records the mass loss as a function of time and temperature. There are two equations that can be used to relate the mass loss rate with the vapor pressure: (1) the Knudsen equation and (2) the Langmuir equation. To apply these equations, the system needs to reach a pseudo (or near) equilibrium condition. Therefore, the experimental conditions must be such that allow the condensed and the vapor/gas phases to be in equilibrium. In order to accomplish equilibrium like conditions, the sample must be in an almost-sealed cell except for a small orifice, from where the vapor escapes. In the Knudsen method vacuum is applied to eliminate the effect that the presence of other gas molecules could have on the evaporation rate of the sample. However, Langmuir alleged that in certain conditions, such as at low temperatures and/or when the vapor pressure is low, the rate of evaporation of a substance is independent of the presence of vapor around it. For that reason, some researchers, when measuring the mass loss of a substance with a predictable low vapor pressure, do not apply vacuum when using the Langmuir equation. However, they use a standard substance to parameterize the experimental setup. The use of one equation or the other will depend on the characteristics of the sample and the availability of an appropriate standard. Some important aspects related to the nature of the samples and vapor pressure measurements are described for future consideration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1993

Development of a molecular beam technique to study early solar system silicon reactions

Silicon monoxide is one of the major gas phase silicon bearing components observed in astronomical environments. Silicon oxide serves as the major rock forming material for terrestrial and meteoritic bodies. It is known that several gas phase reactions produce mass independent isotopic fractionations which possess the same delta(O-17)/delta(O-18) ratio observed in Allende inclusions. The general symmetry dependence of the chemically produced mass independent isotopic fractionation process suggests that there are several plausible reactions which could occur in the early solar system which may lead to production of the observed meteoritic oxygen isotopic anomalies. An important component in exploring the role of such processes is the need to experimentally determine the isotopic fractionations for specific reactions of relevance to the early solar system. It has already been demonstrated that atomic oxygen reaction with CO, a major nebular oxygen bearing species, produces a large (approximately 90 percent), mass independent isotopic fractionation. The next hurdle regarding assessing the involvement of symmetry dependent isotopic fractionation processes in the pre-solar nebula is to determine isotopic fractionation factors associated with gas phase reactions of metallic oxides. In particular, a reaction such as O + SiO yields SiO2 is a plausible nebular reaction which could produce a delta(O-17) is approximately delta(O-18) fractionation based upon molecular symmetry considerations. While the isotopic fractionations during silicate evaporation and condensation have been determined, there are no isotopic studies of controlled, gas phase nucleation processes. In order to carefully control the reaction kinetics, a molecular beam apparatus has been constructed. This system produces a supersonic, collimated beam of SiO molecules which is reacted with a second beam of oxygen atoms. An important feature of molecular beams is that they operate at sufficiently low pressures and high temperatures in the jet that avalanche nucleation and clustering processes may be avoided.

Dong, Q. W.↗
DOE OSTI2022

Theory of In-Cloud Activation of Aerosols and Microphysical Quasi-Equilibrium in a Deep Updraft

The microphysical quasi-equilibrium in an ascending adiabatic parcel is elucidated by an analytical theory in 0D with drastic simplifications. The theory predicts how in-cloud activation is most likely to be triggered by the onset of precipitation during sufficient ascent, with the ascent only needing to approach almost twice the cloud-base updraft speed aloft. The precipitation and cloud condensate mass fields are coupled in a closed system in a simplified version of the model. The initial state of no precipitation is unstable with respect to a perturbation. In the 2D phase space of both mass fields, there is a neutral line. Unstable growth of precipitation mass drives the system to cross the line into a regime of stability. An attractor is then approached consisting of precipitation mass balanced by accretion of cloud mass and fallout. The cloud-particle number concentration also approaches a stable equilibrium governed by the balance between in-cloud activation aloft from the inexorably increasing supersaturation during vertical acceleration and accretion of cloud droplets by precipitation. Dimensionless numbers characterizing the microphysical equilibria and their stability are derived mathematically, including a condensation–precipitation efficiency and an in-cloud activation efficiency. The theory explains common observations of the orders of magnitude of liquid water content in convective and stratiform clouds. Finally, sensitivity tests of the numerically integrated theoretical equations are documented with respect to variations in cloud condensation nucleus (CCN) aerosols and updraft speed. In conclusion, it is shown that this theory of in-cloud activation, with an increasing supersaturation during ascent, applies to both ice-only and liquid-only cloud.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2020

Coordinated NanoSIMS and TEM Analysis of a Large 26Mg-Rich AGB Silicate from the Meteorite Hills 00426 CR2 Chondrite

Silicates are one of the most abundant presolar phases around evolved stars, in the inter-stellar medium (ISM), and in our Solar System. These grains afford the opportunity for O, Si, Mg, Fe, and Ca isotopic analyses to constrain stellar nucleosynthetic and mixing processes, and Galactic chemical evolution (GCE). While Mg and Fe isotopic studies have been successfully conducted on presolar silicates, isotopic analyses beyond O and Si are often hampered by the small grain sizes (average ~250 nm). This also makes coordinated mineral and chemical characterization challenging. These studies provide insight into the dust condensation conditions as well as subsequent alteration in the ISM and/or the Solar System. TEM studies of presolar silicates have shown that they are much more mineralogically and chemically diverse than other presolar phases [1 and references therein]. Large (>500nm) presolar silicate grains are rare, but they allow for detailed isotopic, mineral, and chemical characterization. We identified a large presolar silicate grain in the MET 00426 CR2 chondrite and report the O, Si, Mg, and Fe isotopic compositions and TEM study of this grain.

Nguyen, A. N.↗
DOE OSTI2026

Structural Heterogeneity and Hydrodynamics of an Intrinsically Disordered Protein Condensate

Biology demonstrates precise control over the free-energy landscape through the selective partitioning of biomacromolecules into membraneless organelles, enabling essential functions such as biochemical transformations, signaling cascades, and mechanical reinforcement. Although the function of these condensates depends on their underlying structure and hydrodynamics, molecular-scale information on these systems remains sparse. Here, in this study, neutron scattering is used to probe the organization and dynamics of the intrinsically disordered N-terminal domain of Galectin-3, an extracellular lectin responsible for facilitating liquid–liquid phase separation on the cellular surface, in both dilute and condensed phases. Dilute solutions contain isolated protein chains in equilibrium with mesoscopic clusters, whereas the condensed phase adopts a bicontinuous, microemulsion-like morphology. The dilute phase behavior is quantitatively described by coarse-grained polymer models from soft-matter physics, demonstrating their predictive power for complex biological proteins. At elevated concentrations, the proteins self-assemble akin to block copolymers, microphase separating through the aggregation of hydrophobic domains along the protein contour. The resulting condensate remains fluid-like despite a 25-fold increase in concentration; its internal hydrodynamics slow by only a factor of 3 relative to dilute protein chains. These results provide a molecular-level framework for how disordered proteins achieve both the structural complexity and dynamic fluidity of biomolecular condensates.

Carrick, Brian R. [Massachusetts Inst. of Technolo↗
DOE OSTI2025

Liquid Phase Modeling in Porous Media: Adsorption of Methanol and Ethanol in H-MFI in Condensed Water

Zeolites are used in the chemical and separation industries for their exceptional selectivity, adsorption capacity, regenerability, and stability in gas and liquid phase processing. Here, we developed an explicit solvation method for predicting solvent/condensed phase effects on adsorption free energies in microporous media such as zeolites based on the hybrid quantum mechanical/molecular mechanical free energy perturbation (QM/MM-FEP) technique. Our explicit solvation method for zeolite systems, called eSZS, aims to capture site-specific interactions during the adsorption process at the Brønsted acid sites of H-MFI zeolite while still considering the diverse configuration space of the solvent molecules. This strategy is ideal for chemical reactions or adsorbates that interact with the microporous medium in few distinct adsorbate/transition state configurations, i.e., the harmonic or similar approximations are acceptable for the adsorbate/transition state while such approximations break down for the solvent molecules that require extensive configuration space sampling. In this way, our approach effectively overcomes the limitations of implicit solvation models and classical force field methods for describing solvation effects on chemical reactions within porous materials such as zeolites. Specifically, in this study, we investigated various aspects of our hybrid QM/MM approach, including QM cluster size dependencies in a periodic electrostatically embedded cluster model (PEECM), rules for link atoms at the QM/MM boundary, and functional and basis set considerations for converged and reasonably accurate gas and aqueous phase methanol and ethanol adsorption free energy predictions in H-MFI. For gas phase adsorption of methanol and ethanol in H-MFI at a Brønsted acid site in T12 position, we compute adsorption free energies at 298 K of −0.61 and −0.75 eV, respectively, using a PEECM containing 50 Si and 1 Al atom with ωB97x-D/def2-TZVP level of theory. For solvent effect calculations, we sample the aqueous phase using grand canonical Monte Carlo (GCMC) simulations to (1) obtain a mean field of electrostatic interactions in the reaction system and (2) perform a rigorous free energy perturbation calculation. Similar to the experimentally and computationally observed endergonic solvation effects observed for hydrocarbon adsorption on metal surfaces, we also observe that a condensed aqueous environment destabilizes methanol and ethanol at these acid sites in H-MFI at 298 K. Specifically, the computed solvation free energies of adsorption (ΔΔG solv ) for methanol and ethanol are +0.44 and +0.54 eV, respectively. From this study, it is evident that adsorbates (methanol and ethanol) are competing with water for adsorption space inside the H-MFI zeolite, leading to an endergonic solvation effect. Here, we expect that the endergonic, aqueous solvent effect during adsorption in microporous zeolites is highly tunable by changing the pore size and hydrophobicity of the microporous material as this will affect the water density inside the pore structure.

Adsorption↗
NASA NTRS1974

Interstellar abundances - Gas and dust

Data on abundances of interstellar atoms, ions and molecules in front of zeta Oph are assembled and analyzed. The gas-phase abundances of at least 11 heavy elements are significantly lower, relative to hydrogen, than in the solar system. The abundance deficiencies of certain elements correlate with the temperatures derived theoretically for particle condensation in stellar atmospheres or nebulae, suggesting that these elements have condensed into dust grains near stars. There is evidence that other elements have accreted onto such grains after their arrival in interstellar space. The extinction spectrum of zeta Oph can be explained qualitatively and, to a degree, quantitatively by dust grains composed of silicates, graphite, silicon carbide, and iron, with mantles composed of complex molecules of H, C, N, and O. This composition is consistent with the observed gas-phase deficiencies.

Field, G. B.↗
DOE OSTI2024

Surface triggered stabilization of metastable charge-ordered phase in SrTiO 3

Charge ordering (CO), characterized by a periodic modulation of electron density and lattice distortion, has been a fundamental topic in condensed matter physics, serving as a potential platform for inducing novel functional properties. The charge-ordered phase is known to occur in a doped system with high d-electron occupancy, rather than low occupancy. Here, we report the realization of the charge-ordered phase in electron-doped (100) SrTiO 3 epitaxial thin films that have the lowest d-electron occupancy i.e., d 1 -d 0 . Theoretical calculation predicts the presence of a metastable CO state in the bulk state of electron-doped SrTiO 3 . Atomic scale analysis reveals that (100) surface distortion favors electron-lattice coupling for the charge-ordered state, and triggering the stabilization of the CO phase from a correlated metal state. This stabilization extends up to six unit cells from the top surface to the interior. Our approach offers an insight into the means of stabilizing a new phase of matter, extending CO phase to the lowest electron occupancy and encompassing a wide range of 3d transition metal oxides.

36 MATERIALS SCIENCE↗