Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “charge order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Charge neutralization as studied experimentally and theoretically

Problems regarding an isolated sphere which emits negative charge are considered. Such a sphere could charge up to large potentials which would inhibit the electron beam from leaving the vicinity of the body. In order to avoid charging to high potentials, a vehicle must attract a return current equal to the emitted current. The present investigation is concerned with theoretical models of some processes believed to be important for the vehicle neutralization problem under various conditions. Attention is given to general time-scale considerations, the low-altitude regime, the high-altitude regime, vehicle-induced discharge, and beam-plasma discharge. The general pattern which emeres as a result of measurements is that below altitudes of approximately 125 + or - 5 km the vehicle potential rarely rises more than several tens of volts.

Linson, L. M.↗
DOE OSTI2025

Order–Disorder Phase Stabilization by Pressure‐Induced Charge Transfer Enhances the Ferroelectric Photovoltaic Effect in Multiferroic BaFe 4 O 7

Abstract Multiferroic ferroelectric photovoltaic (FPV) materials, combining magnetic and ferroelectric properties, are of paramount importance for optoelectronic and photovoltaic applications. However, optimizing both the remanent polarization and the optical bandgap—key factors for enhanced FPV performance—presents a significant challenge due to their trade‐off. This work shows that pressure‐induced charge transfer between different metal sites can break this trade‐off. Above ≈20 GPa, charge transfer between different trivalent iron (Fe) sites in the multiferroic material BaFe 4 O 7 leads to Fe valence disproportionation, FeO 4 tetrahedra disorder, and Jahn–Teller distortion of FeO 6 octahedra. These changes reduce the bandgap, lower resistivity, and enhance ferroelectric polarization, resulting in a 2.5‐fold increase in photocurrent. Upon decompression, BaFe 4 O 7 retains an order–disorder structure, optimal ferroelectric and optical properties at ambient conditions. This work provides a novel pathway to simultaneously optimizing ferroelectricity and bandgap via pressure‐induced charge transfer, overcoming the traditional trade‐off in FPV materials, and offers a promising approach for developing high polarization performance, narrow‐bandgap FPV materials.

Chemistry↗
DOE OSTI2023

Dynamics of rapidly spinning blob-filaments: Fluid theory with a parallel kinetic extension

Blob-filaments (or simply “blobs”) are coherent structures formed by turbulence and sustained by nonlinear processes in the edge and scrape-off layer (SOL) of tokamaks and other magnetically confined plasmas. The dynamics of these blob-filaments, in particular, their radial motion, can influence the scrape-off layer width and plasma interactions with both the divertor target and with the main chamber walls. Motivated by recent results from the XGC1 gyrokinetic simulation code reported on elsewhere [J. Cheng et al., Nucl. Fusion 63, 086015 (2023)], a theory of rapidly spinning blob-filaments has been developed for this work. The theory treats blob-filaments in the closed flux surface region or the region that is disconnected from sheaths in the SOL. It extends previous work by treating blob spin, arising from partially or fully adiabatic electrons, as the leading-order effect and retaining inertial (ion charge polarization) physics in next order. Spin helps to maintain blob coherency and affects the blob's propagation speed. Dipole charge polarization, treated perturbatively, gives rise to blob-filaments with relatively slow radial velocity, comparable to that observed in the simulations. The theory also treats the interaction of rapidly spinning blob-filaments with a zonal flow layer. It is shown analytically that the flow layer can act like a transport barrier for these structures. Finally, parallel electron kinetic effects are incorporated into the theory. Various asymptotic parameter regimes are discussed, and asymptotic expressions for the radial and poloidal motion of the blob-filaments are obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Measurement of space charge effects and energy calibration in ProtoDUNE-SP

The single-phase liquid argon prototype at CERN (ProtoDUNE-SP) acts as a validation of the design for the DUNE single-phase far detector. With a total mass of 770 tons, it is the largest monolithic liquid argon single-phase time projection chamber in the world. ProtoDUNE-SP collected test-beam in autumn of 2018 and has been collecting cosmic and special calibration data since the end of 2018.The accumulation of positive ions in a LArTPC located on the surface can distort the electric field and the reconstructed particle trajectories. It is critical to understand and correct for the space charge effects in order to achieve the desired spatial and calorimetric resolutions in the LArTPC. This talk will present the measurement of space charge effects and the calorimetric measurements of the detector in ProtoDUNE-SP.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Re-entrance to a ferromagnetic insulator with oxygen-vacancy ordering in the La 0.7 Sr 0.3 MnO 3 /SrTiO 3 superlattice

The charge-density wave is correlated with the properties in transition metal oxides, and regulating this state is important to explore the potential of oxides. Defects could modulate the local environment, in which the effect is subject to the concentration and arrangement, and an artificial arrangement of defect-ordering is highly expected to design the material properties. In this work, the ordering of oxygen vacancies with a preferred location on the (001) La/SrO plane by self-structural optimization was induced in La 0.7 Sr 0.3 MnO 3 /SrTiO 3 superlattices with medium oxygen pressure during SrTiO 3 deposition, and then the ferromagnetic charge-ordering (CO)/charge-density-wave (CDW) state was formed in La 0.7 Sr 0.3 MnO 3 with susceptibility to magnetic field, temperature, and superlattice configuration. In addition, re-entrance to the ferromagnetic insulator CO/CDW could be induced by a high magnetic field. The selective occupancy of oxygen vacancies on the (001) La/SrO plane and the phase fluctuation around the CO/CDW-to-ferromagnetic metal phase transition were critical to the above properties. The interfacial diffusion with atomic-level resolution to control oxygen vacancies could be used in other magnetoelectric systems and corresponding device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Boosting electrochemical reaction and suppressing phase transition with a high-entropy O3-type layered oxide for sodium-ion batteries

Complex phase transitions induced by interlayer slides in layered cathode materials lead to poor cycling stability and rate capability for sodium-ion batteries. Herein, we design and prepare a new six-component high-entropy oxide (HEO) layered cathode O3–Na(Fe 0.2 Co 0.2 Ni 0.2 Ti 0.2 Sn 0.1 Li 0.1 )O 2 to enable highly reversible electrochemical reaction and phase-transition behavior. The HEO cathode exhibits good cycling performance (capacity retention of ~81% after 100 cycles at 0.5C) and outstanding rate capability (capacity of ~81 mA h g –1 at 2.0C) due to the higher sodium diffusion coefficient (above 5.75 × 10 –11 cm 2 s –1 ) than most reported O3-type cathodes. Moreover, the high-entropy cathode has superior compatibility with the hard carbon anode and delivers a specific capacity of 90.4 mA h g –1 (energy density of ~267.5 W h kg –1 ). Ex situ X-ray diffraction proves that the high-entropy designing effectively suppresses the intermediate phase change to achieve reversible O3–P3 phase evolution, and in turn stabilizes the layered structure. X-ray absorption spectroscopy and Mössbauer spectrum of 57 Fe suggest that Ni 2+ /Ni 3.5+ , Co 3+ /Co 3.5+ , and part of Fe 3+ /Fe 3.5+ redox reaction contribute the charge compensation. Finally, the enhanced performance can be attributed to the disordered distribution of multi-component transition metals in HEO suppressing the ordering of electric charges and sodium vacancies, thereby inhibiting the interlayer slide and phase transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Quantifying the relationship between electric field enhancement and plasmon-driven electron transfer

Plasmonic materials interact strongly with light to create localized, out-of-equilibrium environments with intense electromagnetic fields known as hotspots. After forming, hotspots dissipate energy into their surroundings and can transfer energy and charge carriers to nearby molecules, giving plasmonic materials the potential to drive reactions with sunlight. However, the field needs a better mechanistic understanding of plasmon–molecule interactions and how the local plasmon environment, specifically the electromagnetic field enhancement and spatial distribution of hotspots, impacts the reaction yield. Here, in this work, we mapped plasmon-driven charge transfer across ordered plasmonic substrates using diffraction-limited surface-enhanced Raman spectroscopy (SERS) microscopy to understand the relationship between the average local electric field enhancement and charge transfer reaction yield. We tracked the plasmon-induced electron transfer to buckminsterfullerene (C 60 ) and found that areas with the greatest SERS intensity were not the areas with the greatest ensemble-averaged reduction of C 60 , suggesting that areas with higher electric field enhancement—or “hotter,” more enhancing hotspots—do not improve the charge transfer reaction yield. This work shows that efforts to improve plasmon-driven charge transfer should not merely focus on creating substrates with extremely enhancing regions but also consider how other factors could optimize photoreduction yields.

Koble, MaKenna M. [Univ. of Minnesota, Minneapolis↗
DOE OSTI2020

Mixed higher-order anisotropic flow and nonlinear response coefficients of charged particles in $\mathrm {PbPb}$ collisions at $\sqrt{\smash [b]{s_{_{\mathrm {NN}}}}} = 2.76$ and 5.02$\,\text {TeV}$

Anisotropies in the initial energy density distribution of the quark-gluon plasma created in high energy heavy ion collisions lead to anisotropies in the azimuthal distributions of the final-state particles known as collective anisotropic flow. Fourier harmonic decomposition is used to quantify these anisotropies. The higher-order harmonics can be induced by the same order anisotropies (linear response) or by the combined influence of several lower order anisotropies (nonlinear response) in the initial state. The mixed higher-order anisotropic flow and nonlinear response coefficients of charged particles are measured as functions of transverse momentum and centrality in $\mathrm {PbPb}$ collisions at nucleon-nucleon center-of-mass energies $\sqrt{\smash [b]{s_{_{\mathrm {NN}}}}} = 2.76$ and 5.02$\,\text {TeV}$ with the CMS detector. The results are compared with viscous hydrodynamic calculations using several different initial conditions, as well as microscopic transport model calculations. None of the models provides a simultaneous description of the mixed higher-order flow harmonics and nonlinear response coefficients.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2005

Proposed Modifications to Engineering Design Guidelines Related to Resistivity Measurements and Spacecraft Charging

A key parameter in modeling differential spacecraft charging is the resistivity of insulating materials. This determines how charge will accumulate and redistribute across the spacecraft, as well as the time scale for charge transport and dissipation. Existing spacecraft charging guidelines recommend use of tests and imported resistivity data from handbooks that are based principally upon ASTM methods that are more applicable to classical ground conditions and designed for problems associated with power loss through the dielectric, than for how long charge can be stored on an insulator. These data have been found to underestimate charging effects by one to four orders of magnitude for spacecraft charging applications. A review is presented of methods to measure the resistive of highly insulating materials, including the electrometer-resistance method, the electrometer-constant voltage method, the voltage rate-of-change method and the charge storage method. This is based on joint experimental studies conducted at NASA Jet Propulsion Laboratory and Utah State University to investigate the charge storage method and its relation to spacecraft charging. The different methods are found to be appropriate for different resistivity ranges and for different charging circumstances. A simple physics-based model of these methods allows separation of the polarization current and dark current components from long duration measurements of resistivity over day- to month-long time scales. Model parameters are directly related to the magnitude of charge transfer and storage and the rate of charge transport. The model largely explains the observed differences in resistivity found using the different methods and provides a framework for recommendations for the appropriate test method for spacecraft materials with different resistivities and applications. The proposed changes to the existing engineering guidelines are intended to provide design engineers more appropriate methods for consideration and measurements of resistivity for many typical spacecraft charging scenarios.

Dennison, J. R.↗
NASA NTRS2005

CdZnTe Image Detectors for Hard-X-Ray Telescopes

Arrays of CdZnTe photodetectors and associated electronic circuitry have been built and tested in a continuing effort to develop focal-plane image sensor systems for hard-x-ray telescopes. Each array contains 24 by 44 pixels at a pitch of 498 m. The detector designs are optimized to obtain low power demand with high spectral resolution in the photon- energy range of 5 to 100 keV. More precisely, each detector array is a hybrid of a CdZnTe photodetector array and an application-specific integrated circuit (ASIC) containing an array of amplifiers in the same pixel pattern as that of the detectors. The array is fabricated on a single crystal of CdZnTe having dimensions of 23.6 by 12.9 by 2 mm. The detector-array cathode is a monolithic platinum contact. On the anode plane, the contact metal is patterned into the aforementioned pixel array, surrounded by a guard ring that is 1 mm wide on three sides and is 0.1 mm wide on the fourth side so that two such detector arrays can be placed side-by-side to form a roughly square sensor area with minimal dead area between them. Figure 1 shows two anode patterns. One pattern features larger pixel anode contacts, with a 30-m gap between them. The other pattern features smaller pixel anode contacts plus a contact for a shaping electrode in the form of a grid that separates all the pixels. In operation, the grid is held at a potential intermediate between the cathode and anode potentials to steer electric charges toward the anode in order to reduce the loss of charges in the inter-anode gaps. The CdZnTe photodetector array is mechanically and electrically connected to the ASIC (see Figure 2), either by use of indium bump bonds or by use of conductive epoxy bumps on the CdZnTe array joined to gold bumps on the ASIC. Hence, the output of each pixel detector is fed to its own amplifier chain.

Chen, C. M. Hubert↗
NASA NTRS2005

Hydrogen-Oxygen PEM Regenerative Fuel Cell Development at the NASA Glenn Research Center

The closed-cycle hydrogen-oxygen PEM regenerative fuel cell (RFC) at the NASA Glenn Research Center has successfully demonstrated closed cycle operation at rated power for multiple charge-discharge cycles. During charge cycle the RFC has absorbed input electrical power simulating a solar day cycle ranging from zero to 15 kWe peak, and delivered steady 5 kWe output power for periods exceeding 8 hr. Orderly transitions from charge to discharge mode, and return to charging after full discharge, have been accomplished without incident. Continuing test operations focus on: (1) Increasing the number of contiguous uninterrupted charge discharge cycles; (2) Increasing the performance envelope boundaries; (3) Operating the RFC as an energy storage device on a regular basis; (4) Gaining operational experience leading to development of fully automated operation; and (5) Developing instrumentation and in situ fluid sampling strategies to monitor health and anticipate breakdowns.

Bents, David J.↗
DOE OSTI2020

Chemical freeze-out parameters of net-kaons in heavy-ion collisions

In this work, we study chemical freeze-out parameters for heavy-ion collisions by performing two different thermal analyses. We analyze results from thermal fits for particle yields, as well as, net-charge fluctuations in order to characterize the chemical freeze-out. The Hadron Resonance Gas (HRG) model is employed for both methods. By separating the light hadrons from the strange hadrons in thermal fits, we study the proposed flavor hierarchy. For the net-charge fluctuations, we calculate the mean-over-variance ratio of the net-kaon fluctuations in the HRG model at the five highest energies of the RHIC Beam Energy Scan (BES) for different particle data lists. We compare these results with recent experimental data from the STAR collaboration in order to extract sets of chemical freeze-out parameters for each list. We focused on particle lists which differ largely in the number of resonant states. By doing so, our analysis determines the effect of the amount of resonances included in the HRG model on the freeze-out conditions. Our findings have potential impact on various other models in the field of relativistic heavy ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Charge density waves in two-dimensional transition metal dichalcogenides

Charge density wave (CDW is one of the most ubiquitous electronic orders in quantum materials. While the essential ingredients of CDW order have been extensively studied, a comprehensive microscopic understanding is yet to be reached. Recent research efforts on the CDW phenomena in two-dimensional (2D) materials provide a new pathway toward a deeper understanding of its complexity. This review provides an overview of the CDW orders in 2D with atomically thin transition metal dichalcogenides (TMDCs) as the materials platform. We mainly focus on the electronic structure investigations on the epitaxially grown TMDC samples with angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy as complementary experimental tools. Finally, we discuss the possible origins of the 2D CDW, novel quantum states coexisting with them, and exotic types of charge orders that can only be realized in the 2D limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Stabilizing Fluctuating Spin-Triplet Superconductivity in Graphene via Induced Spin-Orbit Coupling

A recent experiment showed that a proximity-induced Ising spin-orbit coupling enhances the spin-triplet superconductivity in Bernal bilayer graphene. Here, in this work, we show that, due to the nearly perfect spin rotation symmetry of graphene, the fluctuations of the spin orientation of the triplet order parameter suppress the superconducting transition to nearly zero temperature. Our analysis shows that both an Ising spin-orbit coupling and an in-plane magnetic field can eliminate these low-lying fluctuations and can greatly enhance the transition temperature, consistent with the recent experiment. Our model also suggests the possible existence of a phase at small anisotropy and magnetic field which exhibits quasilong-range ordered spin-singlet charge 4⁢e superconductivity, even while the triplet 2⁢e superconducting order only exhibits short-ranged correlations. Finally, we discuss relevant experimental signatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

A V 3 Sb 5 kagome superconductors

Here, the recent discovery of the AV 3 Sb 5 (A = K, Rb, Cs) kagome superconductors launched a growing field of research investigating the interplay between superconductivity and charge-density wave order in kagome metals. Specifically, the AV 3 Sb 5 family of materials naturally exhibits a Fermi level close to the Van Hove singularities associated with the saddle points formed from the prototypical kagome band structure. The charge-density wave and superconducting states that form within the kagome networks of these compounds exhibit a number of anomalous properties reminiscent of theoretical predictions of exotic states in kagome metals tuned close to their Van Hove fillings. In this Review, we discuss the key structural and electronic features of AV 3 Sb 5 compounds and survey the status of investigations of their unconventional electronic phase transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

π phase shift across stripes in a charge density wave system

Many strongly correlated materials are characterized by deeply intertwined charge and spin order. Besides their high superconducting transition temperatures, one of the central features of these complex patterns in cuprates is a phase shift which occurs across lines of decreased hole density. That is, when doped away from their antiferromagnetic phase, the additional charge is not distributed uniformly, but rather in “stripes.” The sublattices preferentially occupied by up and down spin are reversed across these stripes, a phenomenon referred to as a “π phase shift.” Many of the spin-charge patterns, including the π phase shift, are reproduced by density matrix renormalization group and quantum Monte Carlo calculations of simplified tight binding (repulsive Hubbard) models. In this paper we demonstrate that this sublattice reversal is generic by considering the corresponding phenomenon in the attractive Hubbard Hamiltonian, where a charge density wave phase forms at half filling. Here, we introduce charge stripes via an appropriate local chemical potential; measurements of charge correlation across the resulting lines of lowered density reveal a clear π phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1961

A Satellite Borne Cadmium Sulfide Total Corpuscular Energy Detector

The properties of single crystals of cadmium sulfide as radiation detectors are described. It has been found possible to select crystals such that: (a) The ratio of increase of conductivity under irradiation to the rate of absorption of energy in the crystal is substantially independent of particle energy (over the examined ranges of 500 ev to 80 kev for electrons and 5 kev to 180 kev for protons) and of the magnitude of energy flux (over the range from.005 to 10 ergs/cm(sup 2 -sec); and (b) The above ration is substantially the same for protons, electrons, alpha particles, x-rays, and gamma-rays. For a driving voltage of 100 volts, typical crystal yield currents of 10(sup -7) to 10(sup- 6) amperes for each erg/cm(sup 2-sec) of energy absorbed by the crystal. The threshold of such crystal detectors (resulting from dark currents of the order of 10(sup 10 amp) is typically 10(sup -3) ergs/cm(sup 2- sec). For the selected crystals a response-temperature coefficient of -0.25% per degree centigrade is found for the temperature range -50 deg C to + 50 deg C. A description is given of a complete CdS total corpuscular energy detector for the study of geomagnetically trapped radiation by means of a satellite. The detector described has a dynamic range great than 10(sup 4), a solid angle of 10(exp -3) steradian, and a detection threshold of approximately 1 erg/cm(sup 2-sec-sterad). A similar detector employing a small magnet for the selective exclusion of electrons is also described. Noteworthy practical features of these detectors for satellite and space probe experiments are: (a) Use of bare crystals, without covering foils, in order to detect charged particles having energies as low as hundreds of electron volts. (b) Simplicity of electronic auxiliaries. (c) Compactness, lightweight and nechanical ruggedness. (d) Low electrical power requirements; and (e) Conversion of conduction current to the rate of a twostate relaxation oscillator in order to facilitate telemetric transmission of data. A pair of such detectors was flown as part of the s-46 satellite payload on March 23, 1960, but due to vehicular failure an orbit was not achieved and the operation of the CdS detectors was observed for only, six minutes of flight.

Freeman, John W.↗
DOE OSTI2020

Correlations between electronic order and structural distortions and their ultrafast dynamics in the single-layer manganite P r 0.5 C a 1.5 Mn O 4

Time-resolved x-ray diffraction experiments on the half-doped single-layered manganite Pr 0.5 Ca 1.5 Mn O 4 are used to monitor the ultrafast photoinduced dynamics of the structural distortion associated with the charge and orbital ordering (CO/OO). As in the nonlayered three-dimensional counterpart, the ordered phase melts in less than 100 fs after 800-nm photoexcitation and subsequently partially recovers due to thermal equilibration of electronic and vibrational systems. Photoexciting Pr 0.5 Ca 1.5 Mn O 4 below the transition temperature of a second structural phase transition that occurs around 146 K (deep inside the CO/OO phase) releases this structural transition, but progresses on a much slower timescale. Finally, this additional reduction of crystal symmetry, which we ascribe to a further tilt of the oxygen octahedra, can thus be considered to be only weakly coupled to CO/OO. Furthermore, static hard-x-ray and resonant soft-x-ray diffraction at the Mn L 2,3 edges experiments identify correlations between structural distortions and electronic order in thermal equilibrium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗