Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cathode utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Improvement of Li-S battery electrochemical performance with 2D TiS 2 additive

As a multifunctional cathode additive, TiS 2 has been used in Li-S batteries to promote sulfur utilization and improve cell cycle life. The improvement of Li-S cell electrochemical performance in the presence of TiS 2 has been attributed to the ability of TiS 2 in adsorbing polysulfide. To maximize the interaction between polysulfides and TiS 2 , the 2-dimensional (2D) TiS 2 nano-sheets with highly exposed TiS 2 surface area has been successfully synthesized by a two-step sonication synthetic procedure. The 2D TiS 2 particles are micron size in the basal plane direction and are nano-sized along the c-axis direction. 2D TiS 2 nano-sheets may adsorb polysulfides more effectively than the raw TiS 2 powder. Li-S cells with 2D TiS 2 nano-sheets additive exhibit better discharge rate capability and significantly reduced capacity-fading after a long term cell cycling. Here, this improvement can be partially attributed to the uniform distribution of 2D TiS 2 nano-sheets particles within the sulfur cathode matrix, which induces more uniform sulfur and lithium sulfide deposition during the cell charge and discharge.

2D TiS2 nano-sheets↗
DOE OSTI2021

Li2O-Based Cathode Additives Enabling Prelithiation of Si Anodes

Low first-cycle Coulombic efficiency is especially poor for silicon (Si)-based anodes due to the high surface area of the Si-active material and extensive electrolyte decomposition during the initial cycles forming the solid electrolyte interphase (SEI). Therefore, developing successful prelithiation methods will greatly benefit the development of lithium-ion batteries (LiBs) utilizing Si anodes. In pursuit of this goal, in this study, lithium oxide (Li2O) was added to a LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode using a scalable ball-milling approach to compensate for the initial Li loss at the anode. Different milling conditions were tested to evaluate the impact of particle morphology on the additive performance. In addition, Co3O4, a well-known oxygen evolution reaction catalyst, was introduced to facilitate the activation of Li2O. The Li2O + Co3O4 additives successfully delivered an additional capacity of 1116 mAh/gLi2O when charged up to 4.3 V in half cells and 1035 mAh/gLi2O when charged up to 4.1 V in full cells using Si anodes.

25 ENERGY STORAGE↗
DOE OSTI2026

Accelerating Laboratory-Based, All-Solid-State Battery Research and Development: Industrially Relevant Small-Batch Dry-Processing, Small and Low-Cost Test Fixtures, and Short-Tolerant Separators

This work presents improvements to mixing (for dry-processed electrodes), separator robustness, and cell testing jigs for all-solid-state batteries (ASSBs). These developments combine synergistically to enable rapid research and development of ASSB catholytes. A mechanical "kneader" is designed and built which emulates the mixing and fibrillation of poly-tetrafluoroethylene binder that occurs in industrially relevant twin-screw extruders. A modest improvement in the mixing and dispersion catholyte materials is observed using micro-resolution X-ray computed tomography (X-ray CT). Catholytes are paired with an In-metal anode and separated by a novel, dual-layer, polyaramid-fiber-supported, sulfide-solid electrolyte (Li6 PS5 Cl) separator. This separator achieves high short tolerance which enabled a 95% success rate across 20 attempted cells and to date over 100 successful cells have been built. ASSBs were tested in a 2032 coin-cell format. Simultaneous cycling of a large number of cells is further enabled by a compact and low cost (~ 38 USD per jig) pressure application jig of which 100 have been constructed to date. The utility of these advances is demonstrated through a brief study on the effect cathode-side conductive carbon and current collector type has on capacity and rate performance.

25 ENERGY STORAGE↗
NASA NTRS1977

All-tantalum electrolytic capacitor

Device uses single-compression tantalum-to-tantalum seal. Single-compression seal allows better utilization of volume within device. As result of all-tantalum case and lengthened cathode, electrical parameters, particularly equivalent series resistance and capacitance stability, improved over silver-cased capacitor.

Green, G. E., Jr.↗
DOE OSTI2024

Phloroglucinol–2,6‐Diaminoanthraquinone as a Durable Redox Mediator for Enhancing Conversion Reaction Kinetics in Lithium‐Sulfur Batteries

Abstract Lithium‐sulfur batteries, despite being a promising solution for next‐generation secondary batteries, require substantial efforts to overcome the challenges of sluggish sulfur redox kinetics, polysulfides shuttling, and Li metal instability before achieving practical viability. Conventional strategies that utilize metal catalysts or soluble redox mediators (RMs) are limited by either impractical producing processes or unsatisfactory service life. Herein, an electrochemically active organic material, phloroglucinol – 2,6‐diaminoanthraquinone (PG‐DAAQ) is synthesized through a green and facile polymerization process to better resolve these issues. Serving as an RM at the cathode, PG‐DAAQ exhibits enduring redox activity within the sulfur operating potential window, leading to enhanced redox kinetics and sulfur utilization. Remarkably, even without any metal elements, PG‐DAAQ exhibits an excellent affinity to polysulfides, thereby suppressing the shuttling and facilitating the formation of a more favorable solid‐electrolyte interface to stabilize Li deposition at the anode. As a result, Li‐S cells employing PG‐DAAQ show significantly enhanced cycling and rate performances than the control cells. Even with a low electrolyte‐to‐sulfur ratio of 6, pouch cells with PG‐DAAQ deliver a reversible discharge capacity of 821 mA h g −1 after 100 cycles at a C/10 rate.

Lai, Tianxing↗
DOE OSTI2022

Quantifying the electrochemical active site density of precious metal-free catalysts in situ in fuel cells

We report advances in the development of precious-group metal-free (PGM-free) catalysts for the oxygen reduction reaction (ORR) in fuel cell cathodes have produced active catalysts that reduce the performance gap to the incumbent Pt-based materials. However, utilization of state-of-the-art PGM-free catalysts for commercial applications is currently impeded by their relatively low durability. Methods designed to study catalyst degradation in the operation of fuel cells are therefore critical for understanding durability issues and, ultimately, their solutions. Here we report the use of Fourier-transform alternating current voltammetry as an electrochemical method for accurate quantification of the electrochemically active site density of PGM-free cathode catalysts, and to follow their degradation in situ during the operation of polymer electrolyte fuel cells. Using this method, we were able to quantify the electrochemical active site density, which will enable the elucidation of degradation mechanisms of PGM-free ORR catalysts in situ in fuel cells.

25 ENERGY STORAGE↗
DOE OSTI2022

A Dual–Phase Electrolyte for High–Energy Lithium–Sulfur Batteries

Dissolution of lithium polysulfides (LiPSs) is essential for fast cathode kinetics, but detrimental for anode stability, especially under lean electrolyte conditions. Here in this work, the phase separation phenomenon between solvents with different polarities (tetramethyl sulfone [TMS] and dibutyl ether [DBE]) is utilized to enable the design of a dual-phase electrolyte. High-polarity, high-density TMS–lithium bis(trifluoromethanesulfonyl)imide–ammonium trifluoroacetate as the cathode electrolyte strongly solvates LiPSs, which propel the sulfur redox reaction. Moreover, the composite of DBE and a polymeric ion conductor serves as the anode electrolyte. The addition of DBE in the anode side effectively prevents the crossover of corrosive species (LiPSs and ammonia trifluoroacetate), enabling a significant improvement in Li-metal anode stability. The electrode-specific dual-phase electrolyte design provides electrochemical performance superior to conventional electrolytes. Without additional electrode engineering, pouch cells assemble with the dual-phase electrolyte cycle under a lean electrolyte (4 µL mg –1 ) and low-Li-excess condition (N/P = 3) for 120 cycles.

25 ENERGY STORAGE↗
DOE OSTI2018

Fluidized Bed Production of Surface Functionalized Powders for Solid Oxide Fuel Cell Cathodes

Fuel cells offer tremendous potential for highly efficient conversion of fossil fuels to useable electrical power. Solid oxide fuel cells (SOFC) are particularly attractive, due to their high efficiency and capability to utilize either hydrogen or hydrocarbon fuels. Presently, there is considerable incentive to develop medium temperature (600 C to 800 C) SOFC's, in order to reduce the material compatibility issues and the engineering challenges associated with higher operating temperatures. Developing cathode materials with viable performance at intermediate temperatures is presently one of the key challenges in commercialization of solid oxide fuel cells. Recent works have shown the advantages of using surface functionalized cathode materials to improve SOFC performance at intermediate temperatures. However, present techniques for surface functionalization are expensive and difficult to implement in commercial SOFC production. In this SBIR Program, Structured Materials Industries, Inc. (SMI), along with partners FuelCell Energy, Inc. (FCE) and the University of Connecticut (UConn), demonstrated a simple and economical process to produce surface functionalized cathode materials, based on fluidized bed technology. SMI has developed a variation on this technology, known as Fluidized Bed Chemical Vapor Deposition (FBCVD), and is presently implementing and commercializing FBCVD as an economical and scalable process to deposit coatings on powder materials. In Phase I of this Project, the SBIR team demonstrated technical feasibility of this approach for producing high performance SOFC cathode materials. In this Phase II Project, the SBIR team refined and optimized the FBCVD process and the surface functionalized cathode materials. Surface functionalized powders of various composition and morphology were produced at SMI using the FBCVD process. Electrochemical characterization of the powders was done at FCE under actual SOFC operating conditions. The results demonstrated the potential for significant improvement in SOFC performance. Long term testing at FCE showed the performance enhancement to be stable with time. Advanced materials characterization at UConn identified the composition and morphology of the materials. SMI's FBCVD processed materials represent a "drop in" replacement for present cathode materials, and should have minimal impact on SOFC production costs. SMI has designed a scaled up FBCVD system for high volume production of SOFC cathode materials, and is well positioned for future implementation and commercialization of the technology developed in this SBIR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding extraction limits of plasma cathodes with experiment and simulation

The project is focused on computations for enhanced ionization near the exit orifice of a plasma cathode and how the cathode extraction electrode geometry and stray magnetic field structure influence available extractable current. The computational effort will take place at the Princeton Collaborative Research Laboratory (PCRF). The specific modeling platform to be utilized from PCRF is the electrostatic direct implicit particle in cell (EDIPIC) code. EDIPIC will be used to study ionization processes in the electron extraction region of the cathode. The control of electron energy is a key aspect to minimizing power losses in the plasma. Exiting electrons ionize gas leaving the orifice and in the process produce the dense plasma from which large amounts of current can be extracted. Project activities include studying processes that determine the energy distribution of the exiting electrons thus providing insight into how to optimize the source. The model will be validated and developed using experimental measurements as warranted. The familiarity and expertise of the team at PPPL with this type of plasma and the challenges posed greatly enhances the likelihood of gaining insight into the extraction sheath under the duration of the proposed activity. The effort is expected to shed a great deal of insight into electron extraction processes and pathways for optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Magnesium Battery Electrolytes with Improved Oxidative Stability Enabled by Selective Solvation in Fluorinated Solvents

Practical Mg batteries require electrolytes that are stable both toward reduction by Mg metal and oxidation by high voltage cathodes. State-of-the-art Mg electrolytes based on weakly-coordinating Mg salts utilize standard ether-type solvents (usually glymes) due to their reductive stability. However, the oxidative stabilities of these solvents are less than ideal, leading to difficulties in realizing the high oxidative stabilities of novel salts. On the other hand, alternative solvents with greater oxidative stability are typically unable to support Mg cycling. Here, in this work, we report a selective solvation approach involving the combination of glyme and hydrofluoroether solvents. Selective solvation of Mg 2+ by the glyme solvent component increases the oxidative stability of the glyme while maintaining sufficient reductive stability of the noncoordinating hydrofluoroether. We show that this approach enables the design of electrolytes with greater oxidative stability than glyme-only electrolytes while retaining enough reductive stability to cycle Mg metal. We also relate the influence of various coordination interactions among the solvents and anions with Mg 2+ to their electrochemical stabilities to better inform the design of future electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2019

Dopant-tuned stabilization of intermediates promotes electrosynthesis of valuable C3 products

The upgrading of CO 2 /CO feedstocks to higher-value chemicals via energy-efficient electrochemical processes enables carbon utilization and renewable energy storage. Substantial progress has been made to improve performance at the cathodic side; whereas less progress has been made on improving anodic electro-oxidation reactions to generate value. Here we report the efficient electroproduction of value-added multi-carbon dimethyl carbonate (DMC) from CO and methanol via oxidative carbonylation. We find that, compared to pure palladium controls, boron-doped palladium (Pd-B) tunes the binding strength of intermediates along this reaction pathway and favors DMC formation. We implement this doping strategy and report the selective electrosynthesis of DMC experimentally. We achieve a DMC Faradaic efficiency of 83 ± 5%, fully a 3x increase in performance compared to the corresponding pure Pd electrocatalyst.

42 ENGINEERING↗
NASA NTRS2014

Micro Cathode Arc Thruster for PhoneSat: Development and Potential Applications

NASA Ames Research Center and the George Washington University are developing an electric propulsion subsystem that will be integrated into the PhoneSat bus. Experimental tests have shown a reliable performance by firing three different thrusters at various frequencies in vacuum conditions. The interface consists of a microcontroller that sends a trigger pulse to the Pulsed Plasma Unit that is responsible for the thruster operation. A Smartphone is utilized as the main user interface for the selection of commands that control the entire system. The propellant, which is the cathode itself, is a solid cylinder made of Titanium. This simplicity in the design avoids miniaturization and manufacturing problems. The characteristics of this thruster allow an array of μCATs to perform attitude control and orbital correction maneuvers that will open the door for the implementation of an extensive collection of new mission concepts and space applications for CubeSats. NASA Ames is currently working on the integration of the system to fit the thrusters and the PPU inside a 1.5U CubeSat together with the PhoneSat bus. This satellite is intended to be deployed from the ISS in 2015 and test the functionality of the thrusters by spinning the satellite around its long axis and measure the rotational speed with the phone gyros. This test flight will raise the TRL of the propulsion system from 5 to 7 and will be a first test for further CubeSats with propulsion systems, a key subsystem for long duration or interplanetary small satellite missions.

CUBESAT↗
DOE OSTI2024

Mechanical and Electrochemical Implications of Drying Temperature on Lithium‐Ion Battery Electrodes

Abstract Lithium‐ion battery (LIB) electrodes are typically produced with n‐methyl‐2‐pyrrolidone, a toxic solvent that is a known carcinogen and reproductive hazard. Accordingly, aqueous processing has been an expanding area of research interest in the field of LIB manufacturing. Although aqueous processing has been widely successful in anode processing, serious challenges remain in processing the cathode. In this work, the drying mechanics of cathode processed with both solvents is investigated though implementation of a chemical‐engineering‐based model to better understand the utilization of heat provided by experimentally determining the heat and mass transfer coefficients. Electrochemical performance is also evaluated to determine the impact of drying temperature on cycling performance. Binder distribution is determined via various methods to confirm differences in binder homogeneity as a function of both solvent and drying temperature. Identified is the large difference in the efficiency in which the heat is used as well as an ideal drying temperature for both aqueous and non‐aqueous processed cathodes. Also identified is the increased sensitivity to processing temperature for aqueous processed electrodes compared to non‐aqueous processed counterparts, pointing to the possibility of tuned drying regimes which would capitalize on the potential cost savings of aqueous processing for cathodes.

25 ENERGY STORAGE↗
DOE OSTI2019

An advanced high energy-efficiency rechargeable aluminum-selenium battery

We report that aluminum-ion batteries (AIBs) are considered as a promising alternative to traditional rechargeable batteries due to their high theoretical capacity, low cost, and multivalent-ion/multi-electron transfer, but are hindered from commercialization by the lack of suitable cathode materials. Herein, an aluminum-selenium (Al-Se) battery that operates at room temperature with high energy efficiency is reported. This Al-Se battery exhibits high selenium utilization with a discharge capacity of 607 mAh g -1 , a reduced overpotential, and high volumetric capacity for over 100 cycles. Furthermore, ex-situ spectroscopic and microscopic investigations of the Se cathodes indicated the existence of an aluminum selenide component as the discharge product. Additionally, in-situ transmission electron microscopy provided not only insights into understanding the Al-Se electrochemistry, but also a real-time characterization technique to evaluate the electrochemistry of AIBs in general.

25 ENERGY STORAGE↗
DOE OSTI2018

Cost of automotive lithium-ion batteries operating at high upper cutoff voltages

Here, the potential for operating automotive battery packs at high upper cutoff voltages (UCV) has been explored using preliminary data on eight cathode materials. The pack level energy density, specific energy, and battery cost are calculated using the spreadsheet tool BatPaC. The tool used experimental data for some cathode materials such as the lithiated oxides of nickel manganese cobalt (NMC), nickel cobalt aluminum (NCA), layered lithium- and manganese-rich nickel manganese cobalt (LMRNMC). The half-cell data were obtained at UCVs between 4.2 and 4.7 V vs. Li/Li + . The experimental data showed LMRNMC with the highest lithiation capacity gain, increasing from 176 mAh·g –1 at 4.2 V to 260 mAh·g –1 at 4.7 V; this advantage is partly offset by its lower average voltage. Assuming optimized cell materials/design and an area-specific impedance of 12 Ω•cm 2 for all the materials, the BatPaC results indicate that the specific energies or energy densities of the battery electric vehicle (BEV) and plug-in hybrid electric vehicle (PHEV) battery packs with the LMRNMC and NMC cathodes can exceed 180 (BEV) and 160 (PHEV) Wh·kg –1 at UCV>4.6 V vs. Li/Li + . The costs of these battery packs are lowest at UCV = 4.7 V (vs. Li/Li + ); estimated at 135–145 and 210–220 $·kWh –1 for BEV and PHEV packs, respectively.

25 ENERGY STORAGE↗
DOE OSTI2025

Coherent Strain-Inhibiting Phase Construction of Lithium-Rich Manganese-Based Oxide Toward High Mechanochemical Stability

A layered lithium-rich manganese-based oxide cathode, containing $R\overline{3}m$ (LiTMO 2 , TM = Mn, Ni, Co) and $C2/m$ (Li 2 MnO 3 ) nanodomains, utilizes both transition metals and oxygen redox to yield substantial energy density. However, the inherent heterogeneous nature and distinct nanodomain redox chemistries of layered lithium-rich oxides will inevitably cause pernicious lattice strain and structural displacement, which can hardly be eliminated by conventional doping or coating strategies and result in accelerated performance decay. Herein, we incorporate a strain-inhibiting perovskite phase coherently grown within the layered structure to effectively restrain the displacement and lattice strain during uneven Li-ion extraction. The enhanced mechanochemical stability of the designed cathode benefits the persistent structure and reversible oxygen redox, thereby achieving high initial Coulombic efficiency and stable cycling and voltage profiles. In conclusion, our approach of lattice engineering alleviates the strain and displacement caused by inhomogeneous reactivity between heterogeneous nanodomains and promotes the development of advanced cathode materials with long durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High Voltage Mg-Ion Battery Cathode via a Solid Solution Cr–Mn Spinel Oxide

We discuss how lattice Mg 2+ in a tailored solid solution spinel, MgCrMnO 4 , is electrochemically utilized at high Mn-redox potentials in a nonaqueous electrolyte. Complementary evidence from experimental and theoretical analyses supports bulk Mg 2+ (de)intercalation throughout the designed oxide frame where strong electrostatic interaction between Mg 2+ and O 2- exists. Mg/Mn antisite inversion in the spinel is lowered to similar to 10% via postannealing at 350 degrees C to further improve Mg 2+ mobility. Spinel lattice is preserved upon removal of Mg 2+ without any phase transformations, denoting structural stability at the charged state at a high potential similar to 3.0 V (vs Mg/Mel. Clear remagnesiation upon first discharge, harvesting up to similar to 180 Wh/kg at 60 degrees C is shown. In the remagnesiated state, insertion of Mg 2+ into interstitial sites in the spinel is detected, possibly resulting in partial reversibility which needs to be addressed for structural stability. The observations constitute a first clear path to the development of a practical high voltage Mg-ion cathode using a spinel oxide.

25 ENERGY STORAGE↗