Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalyst characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Efficient hydrogen peroxide generation using reduced graphene oxide-based oxygen reduction electrocatalysts

Electrochemical oxygen reduction has garnered attention as an emerging alternative to the traditional anthraquinone oxidation process to enable the distributed production of hydrogen peroxide. Here, we demonstrate a selective and efficient non-precious electrocatalyst, prepared through an easily scalable mild thermal reduction of graphene oxide, to form hydrogen peroxide from oxygen. During oxygen reduction, certain variants of the mildly reduced graphene oxide electrocatalyst exhibit highly selective and stable peroxide formation activity at low overpotentials (<10 mV) under basic conditions, exceeding the performance of current state-of-the-art alkaline catalysts. Spectroscopic structural characterization and in situ Raman spectroelectrochemistry provide strong evidence that sp 2 -hybridized carbon near-ring ether defects along sheet edges are the most active sites for peroxide production, providing new insight into the electrocatalytic design of carbon-based materials for effective peroxide production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Single-step One-pot Synthesis of TiO 2 Nanosheets Doped with Sulfur on Reduced Graphene Oxide with Enhanced Photocatalytic Activity

A hybrid photocatalyst based on anatase TiO 2 was designed by doping TiO 2 with sulfur and incorporating reduced graphene oxide (TiO 2 -S/rGO hybrid), with an aim to narrow the band gap to potentially make use of visible light and decrease the recombination of excitons, respectively. This TiO 2 -S/rGO hybrid was successfully synthesized using a one-pot hydrothermal method via single-step reaction. The structure and morphology of the TiO 2 -S/rGO hybrid catalyst was carefully characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Its photocatalytic reactivity was evaluated by the degradation of methyl blue. The results showed that both the doping of sulfur and the introduction of rGO worked as designed, and the TiO 2 -S/rGO hybrid exhibited high photocatalytic activity under simulated sunlight. Finally, considering both the facile and scalable reaction to synthesize TiO 2 -S/rGO hybrid, and its excellent photocatalytic performance, such TiO 2 -S/rGO hybrids are expect to find practical applications in environmental and energy sectors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Novel Homogeneous Electrocatalysts for the Nitrogen Reduction Reaction

This project funded a broad range of fundamental studies in the research labs of Prof. John Berry at the University of Wisconsin – Madison. The overall goals of this research are to identify and explore promising new fundamental chemistry of metal-metal bonded coordination compounds in catalysis, with a particular focus on exploring the technologies needed for the transition to a nitrogen economy. We focus on two key technologies for this overall goal: Electrochemical synthesis of ammonia from nitrogen and water, and Electrochemical ammonia oxidation to produce nitrogen. Ammonia is the most hydrogen-rich material known aside from hydrogen itself, and is therefore an ideal fuel unit. Currently, ammonia synthesis uses significant fossil fuel inputs, has a large carbon footprint, and is performed in large, centralized facilities, mandating the exploration of carbon-neutral approaches that can be done in a distributable manner so that ammonia transportation does not pose a bottleneck. Our work towards these goals is organized as follows: Goal 1: Synthesis and characterization of new catalysts and N2RR intermediates; Goal 2: Thermodynamic investigations of all catalysts and intermediates; Goal 3: Exploration of the electrocatalytic N¬2RR using new catalysts. We additionally made progress toward a related Goal 4: Exploration of new types of catalysts with other, cheaper transition metals. We had a major setback in year 1 of the grant due to the student driving this project (Tristan Brown) contracting an incurable disease that made it impossible for him to perform lab work. Tristan transitioned to a computational chemistry project and was subsequently able to complete his PhD.

02 PETROLEUM↗
DOE OSTI2025

Microwave-Assisted Production of Polycarbonate Diols using Carbon Dioxide

Carbon dioxide (CO2) is a cheap and readily available resource that can be converted to value-added chemicals including fuels, polymers, and other products. One lucrative option is polycarbonate diols, which are the precursor to polyurethanes that find wide applications in automotive and aerospace industries. The traditional process for the synthesis of polycarbonate diols involves using hazardous phosgene and alcohols in a strongly basic medium that generates significant amounts of salt. Alternately, CO2 can be reacted with alkanediols over CeO2 catalysts to produce polycarbonate diols. For the current work, a microwave-assisted atmospheric flow system was investigated for converting CO2 into polycarbonate diols and was compared against a thermal system. Various parameters such as type and ratio of solvents, and the addition of dehydrating agents for the microwave system was tested. The different CeO2 catalysts used were characterized using Brunauer–Emmett–Teller (BET) surface area analysis, Raman spectroscopy, X-ray diffraction, and temperature programmed desorption (NH3-TPD and CO2-TPD).

CO2 utilization↗
DOE OSTI2017

Production of alpha-hydroxy carboxylic acids and esters from higher sugars using tandem catalyst systems

The present disclosure is directed to methods and composition used in the preparation of alpha-hydroxy carboxylic acids and esters from higher sugars using a tandem catalyst system comprising retro-aldol catalysts and Lewis acid catalysts. In some embodiments, these alpha-hydroxy carboxylic acids may be prepared from pentoses and hexoses. The retro-aldol and Lewis catalysts may be characterized by their respective ability to catalyze a 1,2-carbon shift reaction and a 1,2-hydride shift reaction on an aldose or ketose substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

R&D with NREL's 2'' Fluidized Bed Reactor (2FBR) Systems; R&D with the NREL Research Gasifier (NRG)

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the 2 Inch Fluidized Bed Reactor, a versatile lab-scale thermal processing and catalytic upgrading system to evaluate the conversion of renewable and waste feedstocks into fuels and chemicals. In addition, the NREL Research Gasifier is a lab-scale gasification system, perfectly suited to study the conversion of biomass and waste streams to purified syngas. This fact sheet summarizes the capabilities of both systems.

09 BIOMASS FUELS↗
DOE OSTI2019

NREL's Capabilities in Techno-Economic and Sustainability Analyses for Thermal and Catalytic Conversion of Biomass and Waste Feedstocks

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the capability to integrate experimental results with detailed process models to estimate biomass conversion costs. This fact sheet summarizes the core capabilities and applications.

09 BIOMASS FUELS↗
DOE OSTI2019

NREL's Capabilities in Modeling and Simulation of Thermal and Catalytic Conversion Processes

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility NREL's thermal and catalytic simulation and modeling team integrates experimental and computational capabilities to address the complexities of real biomass and waste streams, enabling development of renewable energy technologies. This fact sheet summarizes the core capabilities and applications.

09 BIOMASS FUELS↗
DOE OSTI2021

From thermal catalysis to plasma catalysis: a review of surface processes and their characterizations

The use of atmospheric pressure plasma to enhance catalytic chemical reactions involves complex surface processes induced by the interactions of plasma-generated fluxes with catalyst surfaces. Industrial implementation of plasma catalysis necessitates optimizing the design and realization of plasma catalytic reactors that enable chemical reactions that are superior to conventional thermal catalysis approaches. This requires the fundamental understanding of essential plasma-surface interaction mechanisms of plasma catalysis from the aspect of experimental investigation and theoretical analysis or computational modeling. In addition, experimental results are essential to validate the relative theoretical models and hypotheses of plasma catalysis that was rarely understood so far, compared to conventional thermal catalysis. This overview focuses on two important application areas, nitrogen fixation and methane reforming, and presents a comparison of important aspects of the state of knowledge of these applications when performed using either plasma-catalysis or conventional thermal catalysis. We discuss the potential advantage of plasma catalysis over thermal catalysis from the aspects of plasma induced synergistic effect and in situ catalyst regeneration. In-situ/operando surface characterization of catalysts in plasma catalytic reactors is a significant challenge since the high pressure of realistic plasma catalysis systems preclude the application of many standard surface characterization techniques that operate in a low-pressure environment. Here, we present a review of the status of experimental approaches to probe gas-surface interaction mechanisms of plasma catalysis, including an appraisal of demonstrated approaches for integrating surface diagnostic tools into plasma catalytic reactors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Selective catalytic reduction of NO by ammonia and NO oxidation Over CoO x /CeO 2 catalysts

The selective catalytic reduction of NOsub>x with NH 3 (NH 3 -SCR) at low temperatures is still a major challenge in environmental catalysis research. Metal oxide based catalysts have attracted great attention due to their excellent low-temperature activity. In this study, CeO 2 -supported cobalt (Co)-oxide with variable Co/Ce weight ratios were prepared by the incipient-wetness impregnation method. The effect of Co loading as well as the effect of temperature on catalytic behaviors have been studied for the NO reduction and NO oxidation reactions. Thorough characterization by means of BET, XRD, and Raman has shown the topological model of the catalyst and interpretation of the observed reactivity trends. The activity test of CoO x /CeO 2 catalysts showed that the addition of Co enhanced the activity of NO reduction as well as that of NO oxidation. The most active catalyst with 10 wt% Co loading showed 70% NO reduction and 85% NO oxidation activity. Catalyst characterization results indicated that Co was monodispersed on ceria surface with the low Co loading amount, while Co 3 O 4 was formed on ceria with high Co loading amounts that affected the overall catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

A Characterization Study of Reactive Sites in ALD-Synthesized WOx/ZrO2 Catalysts

A series of ZrO2-supported WOx catalysts were prepared using atomic layer deposition (ALD) with W(CO)6, and were then compared to a WOx/ZrO2 catalyst prepared via conventional impregnation. The types of sites present in these samples were characterized using temperature-programmed desorption/thermogravimetric analysis (TPD-TGA) measurements with 2-propanol and 2-propanamine. Weight changes showed that the WOx catalysts grew at a rate of 8.8 × 1017 W atoms/m2 per cycle. Scanning transmission electron microscopy/energy-dispersive spectroscopy (STEM-EDS) indicated that WOx was deposited uniformly, as did the 2-propanol TPD-TGA results, which showed that ZrO2 was completely covered after five ALD cycles. Furthermore, 2-propanamine TPD-TGA demonstrated the presence of three types of catalytic sites, the concentrations of which changed with the number of ALD cycles: dehydrogenation sites associated with ZrO2, Brønsted-acid sites associated with monolayer WOx clusters, and oxidation sites associated with higher WOx coverages. The Brønsted sites were not formed via ALD of WOx on SiO2. The reaction rates for 2-propanol dehydration were correlated with the concentration of Brønsted sites. While TPD-TGA of 2-propanamine did not differentiate the strength of Brønsted-acid sites, H–D exchange between D2O and either toluene or chlorobenzene indicated that the Brønsted sites in tungstated zirconia were much weaker than those in H-ZSM-5 zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Trends in electrocatalytic activity and stability of transition-metal nitrides

Transition metal nitrides (TMNs) are a class of electrocatalyst support materials similar to transition metal carbides (TMCs) with the advantage of avoiding the issues arising from graphitic carbon surface deposits during synthesis. Inspired by previous studies suggesting that TMCs could be used to reduce Pt loading for the hydrogen evolution reaction (HER), this work explored the feasibility of TMN-supported Pt and Au as HER electrocatalysts. Here this study established a volcano-like trend between electrochemical HER activity and hydrogen-binding energy (HBE) calculated from density functional theory. The Pt/TiN and Au/TiN materials were used to extend knowledge from well-characterized thin films to powder catalysts. In situ X-ray absorption spectroscopy (XAS) measurements provided additional characterization of the Pt/TiN and Au/TiN catalysts under HER conditions. Trends in the electrochemical stability of TMNs were also investigated over a wide range of potentials and pH values, which can be used to guide future studies for TMN-supported electrocatalysts.

58 GEOSCIENCES↗
DOE OSTI2021

Operando XAS/SAXS: Guiding Design of Single-Atom and Subnanocluster Catalysts

Single-atom and subnanocluster catalysts (SSCs) represent a highly promising class of low-cost materials with high catalytic activity and high atom-utilization efficiency. However, SSCs are susceptible to undergo restructuring during the reactions. Exploring the active sites of catalysts through in situ characterization techniques plays a critical role in studying reaction mechanism and guiding the design of optimum catalysts. In situ X-ray absorption spectroscopy/small-angle X-ray scattering (XAS/SAXS) is promising and widely used for monitoring electronic structure, atomic configuration, and size changes of SSCs during real-time working conditions. Unfortunately, there is no detailed summary of XAS/SAXS characterization results of SSCs. The recent advances in applying in situ XAS/SAXS to SSCs are thoroughly summarized in this review, including the atomic structure and oxidation state variations under open circuit and realistic reaction conditions. Furthermore, the reversible transformation of single-atom catalysts (SACs) to subnanoclusters/nanoparticles and the application of in situ XAS/SAXS in subnanoclusters are discussed. To conlcude, the outlooks in modulating the SSCs and developing operando XAS/SAXS for SSCs are highlighted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Full Spectrum of Characterization for Insight into Carbon Speciation and Removal on a Cu/BEA Catalyst During Renewable High-Octane Hydrocarbon Synthesis

Conversion of methanol and dimethyl ether to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2019

Half-Wave Potential or Mass Activity? Characterizing Platinum Group Metal-Free Fuel Cell Catalysts by Rotating Disk Electrodes

There are challenges in comparing catalyst performance. The most common method is to compare half-wave potentials (E 1/2 ). This metric has been helpful since it has allowed the platinum-group metal-free (PGM-free) catalyst community to show that the half-wave potential of PGM-free catalysts can compete with platinum catalysts. However, the issue with this metric can be observed in that E 1/2 increases as the rotating disk electrode (RDE) catalyst loading increases. Furthermore, comparisons between catalysts by half-wave potential are biased towards studies that used higher loading, and loading dependence complicates comparing studies of different loadings. Hence, we propose a shift to focusing on mass activity for PGM-free catalysts.

25 ENERGY STORAGE↗
NASA NTRS1990

Characterization of the surfaces of platinum/tin oxide based catalysts by Fourier Transform Infrared Spectroscopy (FTIR)

A Pt/SnO2 catalyst has been developed at NASA Langley that is effective for the oxidation of CO at room temperature (1). A mechanism has been proposed to explain the effectiveness of this catalyst (2), but most of the species involved in this mechanism have not been observed under actual catalytic conditions. A number of these species are potentially detectable by Fourier Transform Infrared Spectroscopy (FTIR), e.g., HOSnO sub x, HO sub y PtO sub z, Pt-CO, and SnHCO3. Therefore a preliminary investigation was conducted to determine what might be learned about this particular catalyst by transmission FTIR. The main advantage of FTIR for this work is that the catalyst can be examined under conditions similar to the actual catalytic conditions. This can be of critical importance since some surface species may exist only when the reaction gases are present. Another advantage of the infrared approach is that since vibrations are probed, subtle chemical details may be obtained. The main disadvantage of this approach is that FTIR is not nearly as sensitive as the Ultra High Vacuum (UHV) surface analytical techniques such as Auger, Electron Spectroscopy for Chemical Analysis (ESCA), Electron Energy Loss Spectroscopy (EELS), etc. Another problem is that the assignment of the observed infrared bands may be difficult.

Keiser, Joseph T.↗
NASA NTRS1989

Characterization of the surfaces of platinum/tin oxide based catalysts by Fourier transform spectroscopy (FTIR)

The Laser Atmospheric Wind Sounder (LAWS) Program has as one of its goals the development of a satellite based carbon dioxide laser for making wind velocity measurements. The specifications for this laser include the requirement that the laser operate at a repetition rate of 10 Hertz continuously for three years. Earth-based carbon dioxide lasers can operate for only a short time on a single charge of gas because the lasing action causes the CO2 to break down into CO and O2. Therefore, earth-based CO2 lasers are generally operated in a flow through mode in which the spent gas is continually exhausted and fresh gas is continually added. For a satellite based system, however, a recirculation system is desired because it is not practical to send up extra tanks of CO2. A catalyst which could enable a recirculating CO2 laser to function continuously for three years needs to be developed. In the development of a catalyst system there are many variables. Obviously, not all possible formulations can be tested for three years, therefore, an accurate model which is based on the reaction mechanism is needed. The construction of a multistep reaction mechanism is similar to the construction of a jigsaw puzzle. Different techniques each supply a piece of the puzzle and the researcher must put the pieces together. Transmission infrared spectroscopy was shown to be very useful in supplying some of the information needed to elucidate reaction mechanisms. The purpose was to see what kind of information might be obtained about the NASA catalyst using infrared absorption spectroscopy. Approximately 200 infrared spectra of the prototype Pt/tin oxide catalyst and its precursor components are observed under a variety of different conditions. The most significant observations are summarized.

Keiser, Joseph T.↗