Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “calcination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Preparation of carbon supported cobalt by electrostatic adsorption of [Co(NH[subscript 3])[subscript 6]]Cl[subscript 3]

Our previous paper [L. D'Souza, L. Jiao, J.R. Regalbuto, J.T. Miller, A.J. Kropf, J. Catal. 248 (2007) 165] presented the synthesis of cobalt catalysts on carbon (Timrex) and silica supports by strong electrostatic adsorption (SEA), using a cobalt hexaamine chloride ([Co(NH{sub 3}){sub 6}]Cl{sub 3}, CoHA) precursor. The CoHA undergoes reductive deammination in an uncontrolled manner in the presence of NaOH and adsorbs as Co{sub 3}O{sub 4} on carbon with broad size distribution. The present paper extends these studies toward the end of synthesizing well-dispersed Co oxide particles in a narrow size range on carbon supports using NH{sub 4}OH. Cobalt uptake versus pH was determined in NH{sub 4}OH and NaOH basified solutions over a number of carbons with varying point of zero charge (PZC). The resulting materials were characterized by ICP, powder XRD, XAS, TPR and STEM. CoHA in the presence of NH{sub 4}OH adsorbs as well dispersed as CoO, Co{sub 3}O{sub 4} and Co(OH){sub 4}{sup 2-} depending upon the pH of the adsorption solution. These phases were undetectable by powder XRD and STEM Z-contrast imaging, but could be identified by XAS. Additionally, non-adsorbed CoHA complexes underwent transformation to [Co(NH{sub 3}){sub 5}Cl]Cl{sub 2} at pH > 11 in solution. After calcinations of 250 C, particle sizes of Co{sub 3}O{sub 4} range from 20-50 {angstrom} from NH{sub 4}OH and 50-200 {angstrom} from NaOH. Maximum metal uptake was approximately 3.3 and 2.7 {micro}mol/m{sup 2} in presence of NaOH and NH{sub 4}OH, respectively. The SEA method of preparation was compared with incipient wetness impregnation (IWI) of Co(NO{sub 3}){sub 2}{sm_bullet}6H{sub 2}O; this method yields Co{sub 3}O{sub 4} particles after 250 C calcinations which are almost as small or in one case, smaller than the calcined SEA samples. Higher metal loadings can be achieved by the SEA method by successive adsorption steps with a little variation in particle size and distribution. However, the main advantage of SEA is in forming mono- or submonolayer of different Co oxide phases on carbon surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decomposition of PVDF to delaminate cathode materials from end-of-life lithium-ion battery cathodes

The growing demand of electric vehicles and rapid consumption of rechargeable lithium-ion batteries (LIBs) require recycling of spent cathode active materials (CAMs) to reduce hazardous wastes and supply raw materials to LIB production. To separate CAMs from the cathode, direct calcination of polyvinylidene fluoride (PVDF) binder is widely applied, which leads to high energy consumption and release of toxic hydrogen fluoride. It is desirable to have an environmentally friendly and effective alternative to traditional direct calcination. In this study, five lithium salts, LiOAc (lithium acetate), LiNO 3 , LiCl, Li 2 CO 3 , and Li 2 SO 4 , were deployed and compared for their performance in recycling CAMs. A peel-off efficiency of up to 98.5% was achieved at a LiOAc to LiNO 3 molar ratio of 3:2, salt to cathode mass ratio of 10:1, and temperature of 300 °C at a holding time of 30 min. This system avoids corrosive chemicals and minimizes particle agglomeration of recycled products. Compared with sodium salt systems (NaOAc-NaNO 3 ) or direct calcination, the LiOAc-LiNO 3 system prevented high reaction temperature or further lithium loss and minimized crystal structure and morphological changes. In conclusion, a decomposition mechanism of PVDF through adsorption of HF and fluorine substitution was proposed.

25 ENERGY STORAGE↗

Adsorptive denitrogenation of model aviation fuel using mesoporous silica in a packed bed adsorption system

This study aims to understand the effects of system process parameters such as flow rate, adsorbent particle size, and use of recycled adsorbent on denitrogenation performance of a model fuel using mesoporous silica gel. The goal is to reduce the nitrogen content of the model fuel from 1500 parts per million to single-digit ppm to meet ASTM specifications for drop-in fuels. This work was done with the intent of applying adsorptive denitrogenation to sustainable aviation fuel (SAF) product fractions produced via hydrothermal liquefaction (HTL). The adsorption performance of the silica is evaluated via packed column breakthrough data, with data generated from collecting from the column outlet and quantifying nitrogen content via gas chromatography. Select experiments use a significantly larger (2.5x column diameter and length) column to demonstrate linear scalability of the process. Thermogravimetric analysis data is collected to evaluate the effects of thermal calcination as a sorbent regeneration method. Effects of a more complex feed are also investigated using a known reference fuel with additional added nitrogen containing compounds. The results presented in this work successfully demonstrate up to 99.8 % removal of NCCs from a model fuel fraction at an original NCC concentration of approximately 1500 ppm to single-digit parts per million after treatment. We also examine calcination of sorbent materials to remove the adsorbed species to enable sorbent reuse and minimize waste generation and show that the calcined material can be reused up to 5 cycles with reduced adsorption capacity. Overall, this work indicates that adsorptive denitrogenation using silica gel is a viable solution to enable the integration of HTL-derived aviation fuels into existing fuel infrastructure.

Adsorption techniques↗

Facile synthesis of ZnO nanoparticles and its photocatalytic activity in the degradation of 2-phenylbenzimidazole-5-sulfonic acid

Sphere-shaped zinc oxide nanoparticles were synthesized following an eco-friendly synthesis method, at mild temperature, using zinc acetate dihydrate as precursor. For this work, a comparative characterization was performed with and without a post-calcined step at 300 °C during 15 min. The synthesized zinc oxide nanoparticles were characterized by FE-SEM, EDS, XRD, BET and UV–vis spectroscopy. After the calcined step, wurtzite was the only crystalline structure present in the sample. The photocatalytic activity of the calcined zinc oxide nanoparticles proved to be high since more than 90% of degradation of 2-phenylbenzimidazole-5-sulfonic acid was reached after 180 min of reaction time. Furthermore, the effects of different factors (i.e. radiation source, oxygen source, and catalyst) on the catalytic reaction were evaluated and, as expected, it was found that all these factors are required, and act synergistically in the photodegradation process.

2-phenylbenzimidazole-5-sulfonic acid↗

Hydrothermal synthesis of iron phosphate microspheres constructed by mesoporous polyhedral nanocrystals

Novel monodispersed Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O microspheres with the diameters of several micrometers were prepared by a facile one-step hydrothermal method without using any templates, only employing FeCl{sub 3}·6H{sub 2}O and NaNH{sub 4}HPO{sub 4} as the initial materials. The obtained samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HR-TEM), respectively. The characterizations revealed that the as-prepared microspheres are constructed by the polyhedral nanoparticles with an average diameter of 100 nm. The corresponding FePO{sub 4} microspheres assembled by mesoporous polyhedral nanocrystals can be easily obtained by calcining a sphere-like Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O precursor. - Graphical abstract: Novel monodispersed Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·H{sub 2}O microspheres with a diameter of several micrometers were successfully obtained by a simple, template-free hydrothermal route. FePO{sub 4} microspheres constructed by mesoporous polyhedral FePO{sub 4} nanocrystals could be easily prepared by calcining an Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O precursor. Display Omitted - Highlights: • Monodispersed Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O microspheres were prepared by a facile hydrothermal method without using any templates • Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O microspheres present a novel morphology, which was constructed by closely polyhedral nanoparticles. • The FePO{sub 4} microspheres assembled by mesoporous polyhedral nanocrystals obtained by calcining Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O precursor.

36 MATERIALS SCIENCE↗

CTAB-assisted sol-gel synthesis of Li{sub 4}Ti{sub 5}O{sub 12} and its performance as anode material for Li-ion batteries

Graphical abstract: Discharge capacity versus cycle number of Li{sub 4}Ti{sub 5}O{sub 12} samples synthesized by (a) CTAB-assisted sol-gel and (b) normal sol-gel method. Highlights: {yields} CTAB-assisted sol-gel route for the synthesis of nano-size Li{sub 4}Ti{sub 5}O{sub 12}. {yields} CTAB directs the microstructure of the gels and helps to control the particle size of Li{sub 4}Ti{sub 5}O{sub 12}. {yields} Li{sub 4}Ti{sub 5}O{sub 12} exhibits promising cycling performance with initial capacity of 174 mAh g{sup -1} and sustains {approx}94% beyond 30 cycles. -- Abstract: A simple CTAB-assisted sol-gel technique for synthesizing nano-sized Li{sub 4}Ti{sub 5}O{sub 12} with promising electrochemical performance as anode material for lithium ion battery is reported. The structural and morphological properties are investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The electrochemical performance of both samples (with and without CTAB) calcined at 800 {sup o}C is evaluated using Swagelok{sup TM} cells by galvanostatic charge/discharge cycling at room temperature. The XRD pattern for sample prepared in presence of CTAB and calcined at 800 {sup o}C shows high-purity cubic-spinel Li{sub 4}Ti{sub 5}O{sub 12} phase (JCPDS no. 26-1198). Nanosized-Li{sub 4}Ti{sub 5}O{sub 12} calcined at 800 {sup o}C in presence of CTAB exhibits promising cycling performance with initial discharge capacity of 174 mAh g{sup -1} ({approx}100% of theoretical capacity) and sustains a capacity value of 164 mAh g{sup -1} beyond 30 cycles. By contrast, the sample prepared in absence of CTAB under identical reaction conditions exhibits initial discharge capacity of 140 mAh g{sup -1} (80% of theoretical capacity) that fades to 110 mAh g{sup -1} after 30 cycles.

36 MATERIALS SCIENCE↗

High surface area neodymium phosphate nano particles by modified aqueous sol-gel method

Graphical abstract: Synthesis of nano rod shaped neodymium phosphate particles with specific surface area as high as 107 m{sup 2} g{sup -1} and particles could be compacted and sintered at as low as 1300 Degree-Sign C to a density of 98.5% (theoretical) with an average grain size of {approx}1 {mu}m. Highlights: Black-Right-Pointing-Pointer Nano size neodymium phosphate is synthesized and characterized using a novel modified aqueous sol gel process. Black-Right-Pointing-Pointer Specific surface area above 100 m{sup 2} g{sup -1} achieved without the addition of any complexing agents. Black-Right-Pointing-Pointer High sintered density reported than the density obtained for powder synthesized through conventional solid state reaction. Black-Right-Pointing-Pointer The particles are nano sized and have rod shape morphology and are retained at higher temperatures. Black-Right-Pointing-Pointer An average grain size of {approx}1 {mu}m obtained for sintered NdPO{sub 4} after thermal etching at 1400 Degree-Sign C. -- Abstract: Synthesis of nano rod shaped neodymium phosphate (NdPO{sub 4}) particles with specific surface area as high as 107 m{sup 2}g{sup -1} and an average length of 50 nm with aspect ratio 5 was achieved using modified sol gel method. Crystallite size calculated from the X-ray diffraction data by applying Scherer equation was 5 nm for the precursor gel after calcination at 400 Degree-Sign C. NdPO{sub 4} was first precipitated from neodymium nitrate solution using phosphoric acid followed by peptization using dilute nitric acid and further gelation in ammonia atmosphere. The calcined gel powders were further characterized by surface area (Brunauer-Emmet-Teller nitrogen adsorption analysis), Transmission electron microscopy, scanning electron microscopy, UV-vis and FT-IR analysis. Transmission electron microscopy confirms the formation of rod like morphology from the sol, gel and the calcined particles in nano size range. These particles could be compacted and sintered at as low as 1300 Degree-Sign C to a density of 98.5% (theoretical) with an average grain size of {approx}1 {mu}m.

36 MATERIALS SCIENCE↗

A novel route for the synthesis of nanotubes and fullerene-like nanostructures of molybdenum disulfide

Graphical abstract: Nanotubes and fullerene-like nanostructures of MoS{sub 2} were synthesized via a microwave-assisted route in solution phase. Highlights: Black-Right-Pointing-Pointer Microwave-assisted route for synthesis of nanotube and fullerene-like nanostructures of MoS{sub 2}. Black-Right-Pointing-Pointer Morphological analysis of the synthesized products. Black-Right-Pointing-Pointer Solvent plays important role in the modification of morphology of MoS{sub 2}. -- Abstract: The paper described the synthesis of nanotubes and fullerene-like nanostructures of MoS{sub 2} through a technically simple, rapid, and energy-efficient microwave-assisted synthesis technique, which involved the use of elemental sulfur dissolved in a mixture of monoethanolamine and hydrazine hydrate as the sulfide source. The microwave induced reaction between the molybdate with sulfide ions, in the presence of hydrazine hydrate in the reaction medium, resulted in the formation of gray colored powders of amorphous MoS{sub 2}. The as-obtained powders were calcined at 600 Degree-Sign C for 2 h and characterized by different techniques. HRTEM analysis of the calcined samples indicated the formation of fullerene-like MoS{sub 2} structures when the starting solution mixture was irradiated with microwave for a period of 200 s, while on 600 s of irradiation of the same revealed the formation of folded sheets like MoS{sub 2} nanotubes. BET surface areas of the calcined samples have been measured and a plausible reaction mechanism for the formation of nanotubes and fullerene-like nanostructures of MoS{sub 2} has been proposed.

36 MATERIALS SCIENCE↗

Cellulose-precursor synthesis of nanocrystalline Co{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} spinel ferrites

Highlights: Black-Right-Pointing-Pointer Synthesis of spinel copper cobalt nanoferrite particles from a cellulose precursor for the first time. Control of nanosize and properties of nanoferrites can take place by varying the calcining temperature. The simple, low cost, easy cellulose process is a choice of nanoparticle processing technology. -- Abstract: Nanocrystalline Cu{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} powders were prepared via a metal-cellulose precursor synthetic route. Cellulose was used as a fuel and a dispersing agent. The resulting precursors were calcined in the temperature range of 450-600 Degree-Sign C. The phase development of the samples was determined by using Fourier transform infrared (FT-IR) spectroscopy and powder X-ray diffraction (XRD). The field-dependent magnetizations of the nanopowders were measured by vibrating sample magnetometer (VSM). All XRD patterns are of a spinel ferrite with cubic symmetry. Microstructure of the ferrites showed irregular shapes and uniform particles with agglomeration. From XRD data, the crystallite sizes are in range of 16-42 nm. Saturation magnetization and coercivity increased with increasing calcining temperature due to enhancement of crystallinity and reduction of oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and photocatalytic activity of mesoporous cerium doped TiO{sub 2} as visible light sensitive photocatalyst

Graphical abstract: Cerium doped titania having optimum 5 wt% of cerium can decompose methylene blue and reduce selenium (IV) efficiently under visible light. Highlights: Black-Right-Pointing-Pointer Effect of cerium doping on the surface properties and visible light mediated photocatalytic reaction is studied. Black-Right-Pointing-Pointer Cerium doping increases the anatase phase stability, surface area (up to 137 m{sup 2}/g) and visible light absorption. Black-Right-Pointing-Pointer Importance of Ce{sup 3+}/Ce{sup 4+}, oxygen vacancy, surface area and crystallinity is correlated with improved catalytic activity. Black-Right-Pointing-Pointer Material with 5 wt% Ce is found to be most active photocatalyst for methylene blue decomposition and Se (IV) reduction. -- Abstract: Cerium doped titania materials were synthesized varying the cerium concentration from 0 to 10 wt%. Materials are characterised by XRD, TEM, XPS and N{sub 2} adsorption desorption method. Surface area and visible light absorption substantially increases and crystallite size decreases with the increasing cerium content. Cerium doping stabilizes the anatase phase and surface area even at 600 Degree-Sign C calcination. Photocatalytic activity towards methylene blue decomposition and selenium (IV) reduction is found to increase with the cerium content up to 5 wt% and then decreases. Materials calcined at 600 Degree-Sign C shows better activity than that calcined at 400 Degree-Sign C, even though surface area decreases. Anatase crystallinity mostly decides the photocatalytic activity rather than only surface area. It can be concluded that the optimum visible light absorption and oxygen vacancy with 5% cerium doping enhances the photocatalytic activity. In addition photocatalytic performance is found to depend on the presence of Ce{sup 4+}/Ce{sup 3+} rather than only visible light absorption.

36 MATERIALS SCIENCE↗

Effect of ZrO{sub 2}-doping of nanosized Fe{sub 2}O{sub 3}/MgO system on its structural, surface and catalytic properties

Highlights: ► Preparation and characterization nano-sized ZrO{sub 2}-doped Fe{sub 2}O{sub 3}/MgO system. ► Pure and doped solids calcined at 500 and 700 °C are mesoporous adsorbents. ► ZrO{sub 2}-doping increased the lattice constant “a” of MgO lattice to an extent proportional to the amount of ZrO{sub 2} added. ► The catalytic activity in H{sub 2}O{sub 2} decomposition was found to increase as a function of dopant concentration. -- Abstract: Fe{sub 2}O{sub 3}/MgO system was prepared by wet impregnation method followed by treatment with different amounts of Zr-dopant salt then heating at 500 and 700 °C. The dopant concentrations were 0.48, 0.95 and 1.4 mol% ZrO{sub 2}. Pure and variously doped solids were characterized using XRD, N{sub 2}-adsorption isotherms carried out at −196 °C and catalytic decomposition of H{sub 2}O{sub 2} in aqueous solution at 25–35 °C. The results revealed that the nanosized MgO phase was only detected in the diffractograms of pure and doped solids calcined at 500 °C. Heating pure and doped solids at 700 °C produced nanosized MgFe{sub 2}O{sub 4} phase together with MgO phase. Pure and ZrO{sub 2}-doped solids calcined at 500 and 700 °C are mesoporous adsorbents. The doping process brought about a measurable decrease in the S{sub BET} of Fe{sub 2}O{sub 3}/MgO system with subsequent increase in its catalytic activity. The catalytic activity of the investigated system toward H{sub 2}O{sub 2} decomposition, expressed as reaction rate constant per unit surface area was found to increase as a function of dopant concentration. The maximum increase in the reaction rate constant per unit surface area measured for the reaction carried out at 30 °C attained 125% for the heavily doped samples. This significant increase was based on the catalytic activity of pure catalyst sample measured under the same conditions.

36 MATERIALS SCIENCE↗

Surface and related bulk properties of titania nanoparticles recovered from aramid–titania hybrid films: A novel attempt

Highlights: ► Aramid–titania hybrid films (5 and 10 wt%-TiO{sub 2}) were prepared via sol–gel processing. ► 450 °C calcination of the films yield anatase-TiO{sub 2} nanoparticles of rod-like morphology. ► The titania nanoparticle, crystal structure, high surface area are stable up to 800 °C. ► The novel approach has the advantage of nearly 100% recovery of titania. ► Increasing calcination temperature up to 1100 °C triggers anatase → rutile transition. -- Abstract: 5 and 10 wt%-TiO{sub 2}-containing aramid–titania hybrid films were prepared using sol–gel processing improved by the inclusion of 3-isocyanato-propyltriethoxysilane (ICTOS) to strengthen bonding of the titania species to the polymer backbone and, hence, lessen its agglomeration. The films were thermally degraded by heating at 450 °C in a dynamic atmosphere of air. The solid residues were found by thermogravimetry, X-ray diffractometry and electron microscopy to consist dominantly of uniformly agglomerated rod-like anatase-TiO{sub 2} nanoparticles, irrespective of the titania content of the film. The recovered titania particle morphology and surface microstructure were examined by field emission scanning and high-resolution transmission electron microscopy, respectively. Whereas, the particle surface chemistry and texture were assessed, respectively, by means of X-ray photoelectron spectroscopy and N{sub 2} sorptiometry. The recovered titanias were found, irrespective of the film content of titania, to enjoy not only a high temperature (up to 800 °C) stable nanoscopic anatase bulk structure, but also a high-temperature stable surface chemical composition (lattice Ti{sup 4+} and O{sup 2−}, and adsorbed OH/CH{sub x} species), (101)-faceted microstructure and highly accessible (145–112 m{sup 2}/g), uniform mesoporous texture with average pore diameter in the narrow range of 3.9–6.3 nm. Increasing the calcination temperature up to 1100 °C enhances an anatase → rutile transition, the extent of which is larger the higher the titania content of the film.

36 MATERIALS SCIENCE↗

Large-scale synthesis of Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Eu{sup 3+}, Tb{sup 3+}, Yb{sup 3+}/Er{sup 3+}, Yb{sup 3+}/Tm{sup 3+}, and Yb{sup 3+}/Ho{sup 3+}) microspheres and their photoluminescence properties

Graphical abstract: In this work, multicolor and monodisperse Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Eu{sup 3+}, Tb{sup 3+}, Yb{sup 3+}/Er{sup 3+}, Yb{sup 3+}/Tm{sup 3+}, and Yb{sup 3+}/Ho{sup 3+}) microspheres were prepared by a homogeneous precipitation method followed by a subsequent calcination process. Display Omitted Highlights: ► Lu{sub 2}O{sub 3}:Ln{sup 3+} microspheres were prepared by a precipitation followed by a calcination process. ► Lu{sub 2}O{sub 3}:Eu{sup 3+}/Tb{sup 3+} samples exhibit respective red or green emissions. ► Lu{sub 2}O{sub 3}:Yb{sup 3+}/Er{sup 3+}/Tm{sup 3+}/Ho{sup 3+} exhibit emissions of green, blue, yellow-green, respectively. ► These finding may find potential applications in bioanalysis and field emission displays. -- Abstract: In this work, multicolor and monodisperse Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Eu{sup 3+}, Tb{sup 3+}, Yb{sup 3+}/Er{sup 3+}, Yb{sup 3+}/Tm{sup 3+}, and Yb{sup 3+}/Ho{sup 3+}) microspheres were prepared by a homogeneous precipitation method followed by a subsequent calcination process. X-ray diffraction (XRD), Fourier transformed infrared (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), photoluminescence (PL) spectra, and cathodoluminescence (CL) spectra were employed to characterize the samples. Upon ultraviolet and low-voltage electron beams excitation, Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Eu{sup 3+} and Tb{sup 3+}) samples exhibit respective bright red (Eu{sup 3+}, {sup 5}D{sub 0} → {sup 7}F{sub 2}) and green (Tb{sup 3+}, {sup 5}D{sub 4} → {sup 7}F{sub 5}) down-conversion (DC) emissions. Under 980 nm NIR irradiation, Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Yb{sup 3+}/Er{sup 3+}, Yb{sup 3+}/Tm{sup 3+}, and Yb{sup 3+}/Ho{sup 3+}) exhibit characteristic up-conversion (UC) emissions of green (Er{sup 3+}, {sup 4}S{sub 3/2}, {sup 2}H{sub 11/2} → {sup 4}I{sub 15/2}), blue (Tm{sup 3+}, {sup 1}G{sub 4} → {sup 3}H{sub 6}) and yellow-green (Ho{sup 3+}, {sup 5}F{sub 4}, {sup 5}S{sub 2} → {sup 5}I{sub 8}), respectively. These finding may find potential applications in bioanalysis, optoelectronic and nanoscale devices, field emission displays, and so on.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A dual chelating sol–gel synthesis of BaTiO{sub 3} nanoparticles with effective photocatalytic activity for removing humic acid from water

Graphical abstract: The cubic phase BaTiO{sub 3} nanoparticles can be obtained at 600 °C and changed into tetragonal phase at 900 °C by a dual chelating sol–gel method, and the photocatalytic activities of the photocatalysts calcined at different temperatures were investigated by the removal of humic acid (HA) from water under UV light irradiation. Highlights: ► The humic acid in water was firstly degradated by BaTiO{sub 3} photocatalyst. ► The cubic BaTiO{sub 3} was obtained and changed into tetragonal phase at lower temperature. ► The chelating agents had an important influence on the phase formation of BaTiO{sub 3}. ► The tetragonal phase BaTiO{sub 3} calcined at 900 °C exhibited higher photocatalytic activity under UV irradiation. -- Abstract: In this paper, a dual chelating sol–gel method was used to synthesize BaTiO{sub 3} nanoparticles by using acetylacetone and citric acid as chelating agents. The samples calcined at different temperatures were analyzed by thermogravimetric and differential thermal analysis (TG-DTA), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscope (SEM) and UV–vis diffuse reflectance spectra (UV–vis). The results indicated that cubic phase BaTiO{sub 3} nanoparticles about 19.6 nm can be obtained at 600 °C and changed into tetragonal phase at 900 °C about 97.1 nm. All the BaTiO{sub 3} nanoparticles showed effective photocatalytic activities on the removal of humic acid (HA) under UV light irradiation. A comparison of single (acetylacetone or citric acid) and dual chelating (acetylacetone and citric acid) synthetic processes was also studied and the results demonstrated that the dual chelating agents indeed reduced phase transformation temperature from cubic to tetragonal BaTiO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aluminium doped ceria–zirconia supported palladium-alumina catalyst with high oxygen storage capacity and CO oxidation activity

Graphical abstract: Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd/γ-Al{sub 2}O{sub 3} possessed high OSC and CO oxidation activity at low temperature. - Highlights: • A new OSC material of Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd/γ-Al{sub 2}O{sub 3} is prepared via a mechanochemical method. • Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd/γ-Al{sub 2}O{sub 3} showed high OSC even after calcination at 1000 °C for 20 h. • Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd/γ-Al{sub 2}O{sub 3} exhibited the highest CO oxidation activity at low temperature correlates with enhanced OSC. - Abstract: The Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd-γ-Al{sub 2}O{sub 3} catalyst prepared by a mechanochemical route and calcined at 1000 °C for 20 h in air atmosphere to evaluate the thermal stability. The prepared Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd-γ-Al{sub 2}O{sub 3} catalyst was characterized for the oxygen storage capacity (OSC) and CO oxidation activity in automotive catalysis. For the characterization, X-ray diffraction, transmission electron microscopy and the Brunauer–Emmet–Teller (BET) technique were employed. The OSC values of all samples were measured at 600 °C using thermogravimetric-differential thermal analysis. Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd-γ-Al{sub 2}O{sub 3} catalyst calcined at 1000 °C for 20 h with a BET surface area of 41 m{sup 2} g{sup −1} exhibited the considerably high OSC of 583 μmol-O g{sup −1} and good OSC performance stability. The same synthesis route was employed for the preparation of the CeO{sub 2}/Pd-γ-Al{sub 2}O{sub 3} and Ce{sub 0.5}Zr{sub 0.5}O{sub 2}/Pd-γ-Al{sub 2}O{sub 3} for comparison.

36 MATERIALS SCIENCE↗

Preparation, characterization and applications of novel carbon and nitrogen codoped TiO{sub 2} nanoparticles from annealing TiN under CO atmosphere

Graphical abstract: Carbon and nitrogen codoped TiO{sub 2} nanoparticles were firstly fabricated by calcining TiN powder under CO atmosphere at different temperatures between 400 and 600 °C, both the improved photocatalytic activity for degradation of methylene blue and enhanced photovoltaic performance for dye sensitized solar cells were demonstrated. - Highlights: • CN-codoped TiO{sub 2} nanoparticles were prepared by calcining TiN under CO atmosphere. • More visible light response was confirmed by UV–vis DRS and photocatalytic results. • Enhanced conversion efficiency was observed for the DSSCs from CN-TiO{sub 2} photoanode. • CN-codoping played an important role to improve the photocatalytic performance. - Abstract: Carbon and nitrogen codoped titania (CN-TiO{sub 2}) nanoparticles were fabricated by calcining titanium nitride (TiN) nanoparticles under carbon monoxide (CO) atmosphere at four different temperatures in a range of 400–600 °C. The as-prepared samples were characterized with X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectroscopy (XPS). Enhanced light absorption in both the UV and visible light region was observed for the resulted CN-TiO{sub 2} nanoparticles in ultraviolet-visible diffuse reflectance spectroscopy (UV–vis DRS). Improved photocatalytic activity toward the degradation of methylene blue by the CN-TiO{sub 2} nanoparticles was demonstrated under UV and visible light, respectively. The highest degradation rate was achieved for CN-TiO{sub 2} nanoparticles (13%) compared to N-TiO{sub 2} (10%) and the commercial P25 (5%) under visible light illumination for 40 min. Furthermore, the improved photocatalytic activity of CN-TiO{sub 2} was also confirmed by the degradation of colorless resorcinol under UV–vis light irradiation. Dye-sensitized solar cells (DSSCs) were fabricated using P25, N-TiO{sub 2} and CN-TiO{sub 2} photoanodes, respectively. The highest conversion efficiency of 3.31% was achieved by the DSSCs based on the CN-TiO{sub 2} photoanodes in comparison with the commercial P25 (1.61%) and N-TiO{sub 2} (2.44%) photoanodes. This work demonstrates that thermal treatment of TiN nanoparticles under CO atmosphere has shown to be a rapid, direct and clean approach to synthesize photocatalysts with enhanced photocatalytic and photovoltaic performance.

36 MATERIALS SCIENCE↗

MgCoAl and NiCoAl LDHs synthesized by the hydrothermal urea hydrolysis method: Structural characterization and thermal decomposition

Highlights: • We synthesized MgCoAl and NiCoAl LDHs by the urea hydrolysis method. • Aluminum rich and crystalline materials have been formed. • The calcination of the LDHs generated mixed oxides with high surface areas. - Abstract: Layered double hydroxides (LDHs) with Mg/Co/Al and Ni/Co/Al were synthesized for the first time by the urea hydrolysis method. The experimental conditions promoted aluminum rich and crystalline materials. The formation of LDHs was investigated by powder X-ray diffraction (XRD), chemical analysis, solid state nuclear magnetic resonance with magic angle spinning ({sup 27}Al-MAS-NMR), simultaneous thermogravimetric/differential thermal analysis (TGA/DTA), FTIR spectroscopy, scanning electron microscopy (SEM), and N{sub 2} adsorption–desorption experiments. A single phase corresponding to LDH could be obtained in all the investigated compositions. Thermal calcination of these LDHs at 500 °C resulted in the formation of solid solutions in which Al{sup 3+} was dissolved. All the calcined materials have rock-salt like structures and high surface areas.

36 MATERIALS SCIENCE↗