Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “body wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

A study analysis of cable-body systems totally immersed in a fluid stream

A general stability analysis of a cable-body system immersed in a fluid stream is presented. The analytical portion of this analysis treats the system as being essentially a cable problem, with the body dynamics giving the end conditions. The mathematical form of the analysis consists of partial differential wave equations, with the end and auxiliary conditions being determined from the body equations of motion. The equations uncouple to give a lateral problem and a longitudinal problem as in first order airplane dynamics. A series of tests on a tethered wind tunnel model provide a comparison of the theory with experiment.

Delaurier, J. D.↗
NASA NTRS1978

On sound transmission into a heavily-damped cylinder

A mathematical model for the transmission of sound into a thin monocoque cylindrical shell is discussed. The model is used to evaluate an oblique plane wave incident upon a flexible thin cylindrical shell. The solution is applicable to the transmission of sound under actual flight conditions. The model is then used to determine curves of cylinder-transmission loss for heavily damped cylinders. Numerical results are found for several plane-wave incidence angles for a narrow-bodied jet fuselage made of aluminum. It is noted that damping (i.e., the loss factor) increases, dips because of reduced cylinder resonances, and eventually disappears when the loss factor of the shell is large enough.

Koval, L. R.↗
NASA NTRS1988

Artificial dissipation models for hypersonic external flow

Four artificial dissipation models which augment central difference schemes were examined for hypersonic external flows. The models were a first and third order dissipation model, a directionally scaled first and third order dissipation model, a flux limited dissipation model, and a flux difference split dissipation model. Each model was implemented in the lower-upper symmetric-Gauss-Seidel (LU-SGS) algorithm to solve the full Navier-Stokes equations. The latter two models can be regarded as total variation diminishing (TVD) schemes. Test results for model problems showed that the flux limited dissipation model was robust enough to predict a high speed blunt body flow with strong shock and expansion waves. The flux difference split dissipation model was capable of shock capturing with higher resolution, but was less robust. First and third order dissipation models turned out to be neither accurate nor robust enough for high Mach number flow computations.

Yoon, Seokkwan↗
NASA NTRS2003

Numerical Simulation of One- and Two-Phase Flows in Propulsion Systems

Four subprojects were conducted using analytical methods, numerical simulation and experimental tests: (A) Shock wave mitigation by spike-shaped blunt bodies with application for the purpose of drag, lift and longitudinal momentum optimization. The main result in this subproject is: application of a single needle against a supersonic flow provides higher benefits for blunt body drag reduction and heat transfer to the body than the application of multiple needles. (B) Solid particles, liquid and air jet injection through the front of a blunt body against a supersonic flow. In this case, the research conducted and analysis of multiple previous investigations in this area have shown essential benefits and preferable application of solid particle injection. (C) Comparison of different methods of fuel injection into supersonic duct flows. Preliminary numerical simulations and theoretical analysis show promising results for Telescope-shaped inlet applications in SCRAMJET; and (D) Development of an acoustic source location method for different applications including propulsion systems.

Gilinsky, Mikhail↗
NASA NTRS2000

Integrated design and simulation for millimeter-wave antenna systems

In this paper the development and application of MODTool (Millimeter-wave Optics Design), a design tool that efficiently integrates existing millimeter-wave optics design software with a solid body modeler and thermal/structural analysis packages, will be discussed.

integrated software CAD physical optics reflector ↗
NASA NTRS1958

Theoretical Calculations of Supersonic Wave Drag at Zero Lift for a Particular Store Arrangement

An analysis, based on the linearized thin-airfoil theory for supersonic speeds, of the wave drag at zero lift has been carried out for a simple two-body arrangement consisting of two wedgelike surfaces, each with a rhombic lateral cross section and emanating from a common apex. Such an arrangement could be used as two stores, either embedded within or mounted below a wing, or as auxiliary bodies wherein the upper halves could be used as stores and the lower halves for bomb or missile purposes. The complete range of supersonic Mach numbers has been considered and it was found that by orienting the axes of the bodies relative to each other a given volume may be redistributed in a manner which enables the wave drag to be reduced within the lower supersonic speed range (where the leading edge is substantially subsonic). At the higher Mach numbers, the wave drag is always increased. If, in addition to a constant volume, a given maximum thickness-chord ratio is imposed, then canting the two surfaces results in higher wave drag at all Mach numbers. For purposes of comparison, analogous drag calculations for the case of two parallel winglike bodies with the same cross-sectional shapes as the canted configuration have been included. Consideration is also given to the favorable (dragwise) interference pressures acting on the blunt bases of both arrangements.

Margolis, Kenneth↗
NASA NTRS2000

Long-Term Global Morphology of Gravity Wave Activity Using UARS Data

This report provides a broad outline of the total body of research conducted during the past three years. We report on detailed model studies of the precise way in which infrared limb scanning satellites explicitly detect gravity waves, and use these insights to resolve earlier discrepant zonal mean estimates of gravity wave variances from satellite limb scanners. Detailed analysis of CRISTA temperature fluctuations are outlined, which provide new global information on long-wavelength stratospheric gravity waves generated by mountains, tropical convection and the mid-latitude jet stream-vortex system, as well as interactions higher in the mesosphere with the diurnal tide. The detailed insights gained from analyzing CRISTA data are applied to provide a multiyear analysis of stratospheric mountain waves over the Andes evident in MLS limb-track data. We also demonstrate for the first time that stratospheric temperature data from the CLAES instrument on UARS resolved gravity waves, and we highlight mountain wave information in a subset of these data. Final conclusions and recommendations are set forth, and the present findings are directly related to the original goals of the research contract. A full list of publications that resulted from this research is provided.

Eckermann, Stephen D.↗
NASA NTRS2000

Long-Term Global Morphology of Gravity Wave Activity Using UARS Data

This report provides a broad outline of the total body of research conducted during the past three years. We report on detailed model studies of the precise way in which infrared limb scanning satellites explicitly detect gravity waves, and use these insights to resolve earlier discrepant zonal mean estimates of gravity wave variances from satellite limb scanners. Detailed analysis of CRISTA temperature fluctuations are outlined, which provide new global information on long-wavelength stratospheric gravity waves generated by mountains, tropical convection and the mid-latitude jet stream- vortex system, as well as interactions higher in the mesosphere with the diurnal tide. The detailed insights gained from analyzing CRISTA data are applied to provide a multi- year analysis of stratospheric mountain waves over the Andes evident in MLS limb-track data. We also demonstrate for the first time that stratospheric temperature data from the CLAES instrument on UARS resolved gravity waves, and we highlight mountain wave information in a subset of these data. Final conclusions and recommendations are set forth, and the present findings are directly related to the original goals of the research contract. A full list of publications that resulted from this research is provided.

Eckermann, Stephen D.↗
NASA NTRS1973

Theoretical and experimental studies of reentry plasmas

A viscous shock-layer analysis was developed and used to calculate nonequilibrium-flow species distributions in the plasma layer of the RAM vehicle. The theoretical electron-density results obtained are in good agreement with those measured in flight. A circular-aperture flush-mounted antenna was used to obtain a comparison between theoretical and experimental antenna admittance in the presence of ionized boundary layers of low collision frequency. The electron-temperature and electron-density distributions in the boundary layer were independently measured. The antenna admittance was measured using a four-probe microwave reflectometer and these measured values were found to be in good agreement with those predicted. Measurements were also performed with another type of circular-aperture antenna and good agreement was obtained between the calculations and the experimental results. A theoretical analysis has been completed which permits calculation of the nonequilibrium, viscous shock-layer flow field for a sphere-cone body. Results are presented for two different bodies at several different altitudes illustrating the influences of bluntness and chemical nonequilibrium on several gas dynamic parameters of interest. Plane-wave transmission coefficients were calculated for an approximate space-shuttle body using a typical trajectory.

Dunn, M. G.↗
NASA NTRS1984

Generation of instability waves in flows separating from smooth surfaces

This paper analyses the coupling between an imposed disturbance and an instability wave that propagates downstream on a shear layer which emanates from a separation point on a smooth surface. Since the wavelengths of the most-amplified instability waves will generally be small compared with the streamwise body dimensions, the analysis is restricted to this 'high-frequency' limit and the solution is obtained by using matched asymptotic expansions. An 'inner' solution, valid near the separation point, is matched onto an outer solution, which represents an instability wave on a slowly diverging mean flow. The analysis relates the amplitude of this instability to that of the imposed disturbance.

Goldstein, M. E.↗
NASA NTRS1975

A wave model of near wakes

A new model for the near-wake studies is presented. It pertains to a tenuous plasma medium with negligible magnetic field effects. The wake-generating body moves at a mesothermal speed, i.e., intermediate between the thermal speeds of ions and electrons of the ambient plasma which is bithermal (Ti less than Te) and has a Debye length much smaller than the body size. The model is constructed by using the concept that the cavity left by a rapidly moving body acts as a generator of finite-amplitude ion acoustic waves which are excited by an initial discontinuity of plasma density at the leading edge of the cavity. This ionic wave motion, represented by fluid equations, is represented approximately by the time dependent one-dimensional Korteweg-de Vries equation. Numerical and analytic solutions are both given.

Liu, V. C.↗
NASA NTRS1981

Surface phenomena in elasticity

Problems of elasticity associated with the behavior of free surfaces of elastic bodies are reviewed with particular reference to the propagation of characteristic waves and the criteria of wrinkling of free surfaces. All transformations are given for the case when a free surface of an elastic body is streamlined by the flow of inviscid fluid. The wrinkling phenomenon is illustrated by example.

Zak, M.↗
NASA NTRS2003

Development of Laser-induced Grating Spectroscopy for Underwater Temperature Measurement in Shock Wave Focusing Regions

In Extracorporeal Shock Wave Lithotripsy (ESWL) underwater shock wave focusing generates high pressures at very short duration of time inside human body. However, it is not yet clear how high temperatures are enhanced at the spot where a shock wave is focused. The estimation of such dynamic temperature enhancements is critical for the evaluation of tissue damages upon shock loading. For this purpose in the Interdisciplinary Shock Wave Research Center a technique is developed which employs laser induced thermal acoustics or Laser Induced Grating Spectroscopy. Unlike most of gasdynamic methods of measuring physical quantities this provides a non-invasive one having spatial and temporal resolutions of the order of magnitude of 1.0 mm3 and 400 ns, respectively. Preliminary experiments in still water demonstrated that this method detected sound speed and hence temperature in water ranging 283 K to 333 K with errors of 0.5%. These results may be used to empirically establish the equation of states of water, gelatin or agar cells which will work as alternatives of human tissues.

Gojani, Ardian B.↗
NASA NTRS1982

Viscous Torques on a Levitating Body

New analytical expressions for viscous torque generated by orthogonal sound waves agree well with experiment. It is possible to calculate torque on an object levitated in a fluid. Levitation has applications in containerless materials processing, coating, and fabrication of small precision parts. Sound waves cause fluid particles to move in elliptical paths and induce azimuthal circulation in boundary layer, giving rise to time-averaged torque.

Busse, F.↗
NASA NTRS1990

Two-body problem in a many-particle system

The energy and wave functions of two-particle states in a dense plasma are essentially influenced by the surrounding medium. However, the two-particle bound-state energies may remain unshifted over a large density interval. Two simple examples are given to demonstrate the compensation of many-particle effects such as the self-energy and effective two-particle potentials in hydrogen plasmas. Neglecting self-energy and Pauli blocking, energy values that follow from numerical solutions of the Schroedinger equation with a Debye potential are obtained.

Kraeft, W. D.↗
NASA NTRS2005

Next Generation Millimeter-Wave Radar for Safe Planetary Landing

Safe, precise landing on planetary bodies requires knowledge of altitude and velocity, and may require active detection and avoidance of hazardous terrain. Radar offers a superior solution to both problems due to its ability to operate at any time of day, through dust and engine plumes, and ability to detect velocity coherently. While previous efforts have focused on providing near term solutions to the safe landing problem, we are designing radar velocimeters and radar imagers for missions beyond the next decade. In this paper we identify the fundamental issues within each approach, at arrive at strawman sensor designs at a center frequency at or around 160 GHz (Gband). We find that a G-band radar velocimeter design is capable of sub-10 cm/s accuracy, and a G-band imager is capable of sub-0.5 degree resolution over a 28 degree field of view. From those designs, we arrive at the key technology requirements for the development of power and low noise amplifiers, signal distribution methods, and antenna arrays that enable the construction of these next generation sensors.

radar velocimetry↗
NASA NTRS1992

Time dependent heat transfer rates in high Reynolds number hypersonic flowfields

Time dependent heat transfer rates have been calculated from time dependent temperature measurements in the vicinity of shock-wave boundary-layer interactions due to conical compression ramps on an axisymmetric body. The basic model is a cylindrical body with a 10 degree conical nose. Four conical ramps, 20, 25, 30, and 35 degrees serve as shock wave generators. Flowfield surveys have been made in the vicinity of the conical ramp vertex, the separation point, and the reattachment point. A significant effort was made to characterize the natural frequencies and relative powers of the resulting fluctuations in heat transfer rates. This research effort, sponsored jointly by NASA and the Air Force, was conducted in the Air Force Flight Dynamics Directorate High Reynolds Facility. The nominal freestream Mach number was 6, and the freestream Reynolds numbers ranged from 2.2 million/ft to 30.0 million/ft. Experimental results quantify temperature response and the resulting heat transfer rates as a function of ramp angle and Reynolds number. The temperature response within the flowfield appears to be steady-state for all compression ramp angles and all Reynolds numbers, and hence, the heat transfer rates appear to be steady-state.

Flanagan, Michael J.↗