Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binary alloys”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

297 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Thermal stability of oxidized ultrathin Li films on TZM for plasma facing components

For improved understanding of the behavior of Li plasma facing components (PFCs) in the presence of oxygen impurities, we report on the thermal stability of ultrathin (up to 1.0 nm) LiO x films on a titanium-zirconium-molybdenum (TZM) alloy substrate over the temperature range of 310–1400 K. LiO x films were prepared by either post-oxidation of Li films or Li films deposited on an oxygen-precovered TZM surface. Thermal stability of these films was studied using a combination of temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and low-energy ion scattering (LEIS). For post-oxidized Li films, TPD showed that no Li desorption occurred until temperatures above 620 K, and then Li desorbed from the surface via at least three desorption peaks. The O 1s XPS spectra on the post-oxidized films at 310 K indicate the formation of lithium oxide (Li2O) and peroxide/hydroxide (Li 2 O 2 /LiOH). The peroxide/hydroxide converts to oxide after heating to 680 K with no desorption of Li or O 2 , and then this film decomposes to liberate Li into the gas phase while leaving oxygen at the TZM surface. Heating the LiO x films to 1070 K led to a solid-state reaction with surface Mo atoms of the substrate to form a condensed binary lithium molybdenum oxide (LixMoOy) phase, which upon further heating decomposed to liberate gas phase binary lithium molybdenum oxide species. Li deposition on an oxygen-precovered TZM surface formed a complex, highly stable, oxygen rich, Li-O-Mo interfacial oxide. Li desorption from multilayer Li films on oxygen-precovered TZM surfaces occurred in a metallic Li multilayer peak and three other oxide-derived peaks. These results support the improved thermal stability of oxidized lithium as compared to metallic Li and have implications for Mo impurity transport into the plasma at high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Visualizing oxygen transport pathways during intergranular oxidation in Ni-Cr

The transport paths of O during intergranular oxidation in binary Ni-Cr were investigated. To isolate the selective oxidation of Cr, oxidation was performed with a CO/CO 2 gas mixture in which the oxygen partial pressure was kept under the NiO dissociation pressure. A combination of electron microscopy and atom probe tomography (APT) was used to study the nanometer-scale details of the passivation and penetrative intergranular oxidation processes at high-energy grain boundaries. Oxygen transport towards the terminating oxidation front is elucidated with dedicated usage of oxygen tracer exchange experiments. Secondary ion mass spectroscopy and APT support classical theories of internal oxidation, revealing preferred transport paths at the oxide/alloy interface with sub-nanometer resolution.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Property Measurements of the NaCl-PuCl 3 Molten Salt System

Thermal properties of several compositions of the binary NaCl-PuCl 3 salt were measured to confirm the eutectic composition and provide high quality data for use by MSR developers. The PuCl 3 was generated by reducing PuO 2 to plutonium metal in the presence of calcium metal and then chlorinating the metallic plutonium with NH 4 Cl. The resulting PuCl 3 was used to make seven binary NaCl-PuCl 3 compositions with between 59.9 mol % PuCl 3 (Salt 1) and 20.0 mol % PuCl 3 (Salt 7). The eutectic temperature was measured to be 457 ± 4 °C by onset determination in DSC analyses of the seven mixtures, which is consistent with the values in the literature. Additional transitions were observed at approximately 332 and 363 °C in analyses of the PuCl 3 -rich compositions (Salts 1-3) at about 376 and 439 °C in analyses the Na-rich compositions (Salts 4-7). The solid state heat capacity decreased with increasing PuCl 3 content. The liquid state heat capacity was measured for Salt 3 (37.4 mol % PuCl 3 ) and Salt 4 (38.3 mol % PuCl 3 ). A higher heat capacity was measured for Salt 4 and measurements with both salts showed a positive correlation with temperature between 520 and 730 °C. Cells fabricated from nickel and molybdenum for use in DSC measurements at high temperatures could not be adequately sealed because these materials are not sufficiently malleable, even after high temperature annealing. It is recommended that future development focus on corrosion-resistant materials that have mechanical and thermal properties similar to the commercially available gold cells, such as Pt-Rh (80–20) and pure platinum. Those materials are chemically inert, soft, and malleable like gold, but have melting temperatures higher than 1000 °C (Rakhtsaum, 2013). Use of the Pt-Rh alloy should be evaluated first based on superior machinability for making precision parts and its current use in commercial DSC high temperature crucibles. The commercial Pt-Rh cells are not hermetically sealable, but it is expected that cells made from thinner stock can be sealed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

From a conventional ferromagnetism to a frustrated magnetism: An unexpected role of Fe in Nd(Al 1-x Fe x ) 2 (x ≤ 0.2)

The structure and magnetic properties of Nd(Al 1-x Fe x ) 2 alloys with x = 0, 0.05, 0.1 and 0.2, which adopt cubic MgCu 2 -type structure with space group Fd3¯m, are studied using x-ray powder diffraction, static and dynamic magnetization, and calorimetric measurements. The lattice constant decreases linearly with increasing Fe content from 8.0106(4) Å to 7.9044(4) Å. Large thermal irreversibilities between zero-field-cooled and field-cooled conditions are observed for all substituted samples. Here, the magnetic transition temperatures exhibit a minimum for x = 0.1, and coercive fields at 2 K increase from 70 Oe for x = 0 to 6.3 kOe for x = 0.2. The absence of λ-type peak in the heat capacity data, frequency dependence of ac magnetic susceptibility, and memory effects indicate formation of a cluster-glass magnetic state when x ≥ 0.1.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Boosting photovoltaic performance of ternary organic solar cells by integrating a multi-functional guest acceptor

Constructing ternary structure is one of the most effective design strategies to break the efficiency ceiling of traditional binary organic solar cells (OSCs). Here, a new Y-series non-fullerene acceptor (Y-T) featuring 1,3-diethyl-2-thiobarbituric acid (DTBA) end groups is developed as a third component for the classical PM6:Y6 binary system. The champion power conversion efficiency of ternary OSCs is increased from 15.64% to 17.37% via incorporating 10 wt% Y-T, with the simultaneously enhanced open-circuit voltage (Voc) of 0.865 V, a short-circuit current density (Jsc) of 26.90 mA/cm 2 , and a fill factor (FF) of 74.97%. The positive contribution of Y-T in the ternary blend can be ascribed to the improved spectroscopic complementarity and enhanced exciton utilization ratio due to the additional energy transfer process. Moreover, Y-T guest acceptor plays a critical role in adjusting the active layer morphology and facilitating three-dimension phase separation, resulting in a balanced charge transport and enhanced FF of ternary OSCs. Overall, this work provides insight into the molecular design of non-fullerene acceptor and suggest guidelines to rationally select guest component for ternary OSCs.

14 SOLAR ENERGY↗
DOE OSTI2025

Suppressing Ordering in Equiatomic Fe-Co via Laser Powder Bed Fusion

Neutron and electron diffraction was employed to evaluate the effectiveness of thermal management strategies in suppressing the formation of the equilibrium-ordered B2 (CsCl) phase in equiatomic binary Fe-Co specimens fabricated by laser powder bed fusion additive manufacturing. Specimens with a tensile dogbone geometry were fabricated using various combinations of process parameters (laser power and raster speed) and thermal management strategies (no support struts, struts only in the top gauge section, and struts throughout the gauge section). Diffraction results demonstrate that the rapid solidification during PBF-L effectively minimized B2 formation, with laser power and effective scan velocity having no significant impact on the degree of ordering. Furthermore, the inclusion of support struts in the top grip region had no perceivable impact on ordering, whereas specimens with support struts in the gauge region exhibited no detectable ordering. Results are discussed in the context of thermal finite element analysis predictions.

Laser Material Processing↗
DOE OSTI2022

Stability of Fe 2 S and Fe 12 S 7 to 125 GPa; implications for S-rich planetary cores

The Fe-FeS phase relations were explored in the 22–25 wt. % S compositional range using single crystal X-ray diffraction in a laser heated diamond anvil cell. At pressures up to 125 GPa and at high temperatures, Fe 2 S and Fe 12 S 7 were determined to co-crystallise. The novel Fe 12 S 7 compound adopts the Co 12 P 7 structure and Fe 2 S assumes the Fe 2 P-type structure. Applying these results to an Fe-FeS binary phase diagram exposes a complex series of FeS phase assemblages in the 16–25 wt. % S range, whereby minor changes in S content significantly affect the crystallisation sequence of Fe-S rich planetary cores. For core compositions S-rich of the Fe 2 S-Fe 12 S 7 eutectic, the small density difference between solid Fe 12 S 7 and Fe 2 S is likely to result in the formation of a core slush rather than a gravitationally stable inner core. Crystallisation of denser Fe 2 S at eutectic conditions could then result in gravitational settling of an Fe 2 S-rich inner core over time. As the Fe 2 P-type Fe 2 S has previously been identified forming at high temperatures to pressures as low as 22 GPa, the core crystallisation regimes determined here also elucidate that the Martian core sulfur composition must lie on the S-rich side of the Fe-Fe 3 S eutectic or even the S-rich side of the Fe 3 S-Fe 2 S eutectic to maintain a fully molten core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Observations of grain-boundary phase transformations in an elemental metal

The theory of grain boundary (the interface between crystallites, GB) structure has a long history 1 and the concept of GBs undergoing phase transformations was proposed 50 years ago 2,3 . The underlying assumption was that multiple stable and metastable states exist for different GB orientations 4,5,6 . The terminology ‘complexion’ was recently proposed to distinguish between interfacial states that differ in any equilibrium thermodynamic property 7 . Different types of complexion and transitions between complexions have been characterized, mostly in binary or multicomponent systems 8,9,10,11,12,13,14,15,16,17,18,19 . Simulations have provided insight into the phase behaviour of interfaces and shown that GB transitions can occur in many material systems 20,21,22,23,24 . However, the direct experimental observation and transformation kinetics of GBs in an elemental metal have remained elusive. In this work we demonstrate atomic-scale GB phase coexistence and transformations at symmetric and asymmetric $[11\bar{1}]$ tilt GBs in elemental copper. Atomic-resolution imaging reveals the coexistence of two different structures at Σ19b GBs (where Σ19 is the density of coincident sites and b is a GB variant), in agreement with evolutionary GB structure search and clustering analysis 21,25,26 . We also use finite-temperature molecular dynamics simulations to explore the coexistence and transformation kinetics of these GB phases. Our results demonstrate how GB phases can be kinetically trapped, enabling atomic-scale room-temperature observations. Our work paves the way for atomic-scale in situ studies of metallic GB phase transformations, which were previously detected only indirectly 9,15,27,28,29 , through their influence on abnormal grain growth, non-Arrhenius-type diffusion or liquid metal embrittlement.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Corrosion of Zinc Cold Spray Coatings in a Wet Sweet and Sour Gas Environment

Internal corrosion is a problem for steel pipelines transporting natural gas or CO 2 containing water and partial pressures of H 2 S higher than 0.3 kPa (0.05 psi). This work aims to mitigate internal corrosion in steel pipelines transporting natural gas containing H 2 S using cold spray coatings. Two types of the cold spray binary metallic coatings (zinc chromium [ZnCr]. zinc niobium [ZnNb]) were studied using electrochemical techniques: potentiodynamic polarization, linear polarization resistance, and electrochemical impedance spectroscopy. The corrosion resistance of cold spray coatings (ZnCr, ZnNb) was evaluated in an environment containing 4 bar CO 2 pressure, simulating the partial pressures found in gas transmission lines over a solution of 3.5 wt% NaCl heated to 40°C. A concentration of 0.003 M Na 2 S 2 O 3 ·5H 2 O, corresponding to H 2 S partial pressures around 0.079 bar (1.146 psi), was used to simulate sour conditions. Postcorrosion surface characterization was performed using a scanning electron microscope (SEM) equipped with an energy-dispersive x-ray spectroscope (EDS) and x-ray diffraction analysis. The data showed that the presence of 0.003 M Na 2 S 2 O 3 ·5H 2 O shifted the corrosion potential to more anodic values and decreased the corrosion current density. Both coatings showed similar behavior after 1 h of exposure in the CO 2 /H 2 S environment, indicating that similar electrochemical reactions were occurring on ZnNb and ZnCr. SEM images and EDS surface analyses for specimens showed a significant change in the surface chemical composition of carbon steel coated with ZnNb and ZnCr after 24 h of immersion. In the presence of thiosulfate (under sour conditions), the formation of corrosion product layers (ZnCO 3 and ZnS) on top of ZnNb and ZnCr coatings increased their corrosion resistance, which helped to reduce their corrosion by a factor of 2. Under a sweet environment, the corrosion rates for steel coated with cold spray coatings after 14 d of exposure are lower than that for galvanized steel by a factor of 5 due to the ZnCO 3 layer formed on top of the coatings. The ZnCO 3 layer formed on the steel surface acts as a physical barrier against corrosion by blocking the diffusion of corrosive species to the surface. No localized attack was observed. ZnCr Cold spray coating with defect showed promising corrosion protection against CO 2 corrosion (sweet corrosion) after 14 d of exposure to a CO 2 environment. Here, the scratch on the coating simulated damage created in service, and it was deep enough to expose the substrate material (steel). The formation of zinc oxide (ZnO) and zinc carbonate (ZnCO 3 ) on the scratch confirmed the cathodic protection of the steel by ZnCr and ZnNb coatings.

36 MATERIALS SCIENCE↗