Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “battery electric”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Projecting Recent Advancements in Battery Technology to Next–Generation Electric Vehicles

Electric vehicles (EVs) have seen rapid growth in adoption over the last several years. Advancements to increase battery life and performance, policy shifts, and high charging rate are expected to further accelerate the development of next generation of EVs. Battery improvements continue to emerge, enabling increased driving range, total distance driven over the life of vehicles, and ability to charge at high rates. Herein, an analysis framework to provide insights into inclusive design metrics, such as specific energy of batteries, energy consumption of vehicles, and charging power infrastructure development, is developed. Various cell-level fast charge protocols to realistic battery designs to understand the infrastructure needs associated with achieving range replacement of 32.25 km min -1 (20 mi min -1 ) are also scaled. Additionally, by calculating scaled power and peak to average power ratio, it is found that there needs to be more distinct alignment between the research efforts focused at the cell level and what is being developed for EV charging infrastructure needs. Finally, impact of high direct current voltage architecture in next-generation EVs is discussed. The findings in this work provide an insight into recent advancements in battery technology to next-generation EVs.

20 mi/min↗
DOE OSTI2023

Assessing the cost-effectiveness of carbon neutrality for light-duty vehicle sector in China

China’s progress in decarbonizing its transportation, particularly vehicle electrification, is notable. However, the economically effective pathways are underexplored. To find out how much cost is necessary for carbon neutrality for the light-duty vehicle (LDV) sector, this study examines twenty decarbonization pathways, combining the New Energy and Oil Consumption Credit model and the China-Fleet model. We find that the 2060 zero-greenhouse gas (GHG) emission goal for LDVs is achievable via electrification if the battery pack cost is under CNY483/kWh by 2050. However, an extra of CNY8.86 trillion internal subsidies is needed under pessimistic battery cost scenarios (CNY759/kWh in 2050) to eliminate 246 million tonnes of CO 2 -eq by 2050 ensuring over 80% market penetration of battery electric vehicles (BEVs) in 2050. Moreover, the promotion of fuel cell electric vehicles is synergy with BEVs to mitigate the carbon abatement difficulties, decreasing up to 34% of the maximum marginal abatement internal investment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Understanding Advanced Vehicle Technology Adoption Potential in Commercial Fleets Across Major Trucking Sectors

Adopting advanced vehicle technologies, such as battery-electric, hybrid, and hydrogen fuel cell vehicles, can be an effective strategy for reducing fleet owners' operating costs. However, different trucking sectors, such as private and for-hire carriers and short- or long-haul operations, may face unique challenges in adopting those vehicle technologies due to their own operational needs and budget constraints. Current studies on fleet-wide vehicle technology projections frequently overlook such sectoral differences and fail to capture variation in adoption potential across sectors. This study addresses this gap by analyzing the disparities in the total cost of ownership (TCO) and payback period (PBP) among a large and heterogeneous sample of fleet owners. It aims to understand the sectoral differences in the long-term potential for adopting advanced vehicle technologies. Utilizing the 2021 US Vehicle Inventory and Use Survey (US VIUS), which offers data on various commercial vehicle sectors, their operational patterns, and current vehicle assets, this research estimates the TCO and PBP for individual trucks over multiple future years. The results reveal variation in the cost-effectiveness of different vehicle technologies across trucking sectors, as well as the potential technology landscape in both the short and long term. The findings from this study can inform policymakers and practitioners on how to prioritize sectors with lower barriers for advanced vehicle technology adoption and support industries that face challenges in switching to advanced vehicles.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

How to design a zero-emissions vehicle mandate? Simulating impacts on sales, GHG emissions and cost-effectiveness using the AUtomaker-Consumer Model (AUM)

We report although numerous studies investigate the impacts of policy on zero-emissions vehicle (ZEV) sales, few address the impacts of a ZEV sales mandate and its particular design features. We use the AUtomaker-consumer Model (AUM) to simulate varying designs of a ZEV mandate in Canada's light-duty vehicle sector, requiring 30% ZEV sales by 2030. Design features include: different penalties for non-compliance, different allocations of credits per ZEV type, and the allowance of banking credits across years. For each policy design, we consider impacts on ZEV adoption, GHG emissions, consumer surplus, automaker profits, and overall policy cost-effectiveness. Results demonstrate trade-offs among the policy designs. Generally, ZEV mandate designs that are more effective at increasing ZEV adoption and decreasing GHG emissions also induce larger reductions in consumer surplus and automaker profits. To achieve the ZEV sales goal, simulations show that a higher non-compliance penalty (CDN$ 10k per credit) is needed. ZEV adoption and GHG reductions are also improved by a “One credit per ZEV” scheme, rather than a “California-style” scheme that gives multiple credits per battery-electric vehicle. Further, allowing automakers to bank credits softens the policy impact on profit and increases automaker compliance in initial years. Across these different design combinations, we find that the most cost-effective design ($CDN/tonne mitigated, including consumer surplus and automaker profits impacts) utilizes a $10k non-compliance penalty and “One credit per ZEV” system that allows banking. Our analysis demonstrates the importance of various ZEV mandate design features, and the complex trade-offs involved among various policy goals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Mitigation of emissions and energy consumption due to light-duty vehicle size increases

Analysts need to consider the shift of light-duty vehicle sales from cars to light trucks to accurately project fuel consumption, greenhouse gas emissions, and consumer spending. Here, we find that energy consumed by on-road light-duty vehicles in the United States can vary by 10% by changing assumptions regarding the sales mix. Scenarios aligned with third-party forecasts, assuming a greater sales proportion of light trucks and fewer cars, yield petroleum consumption 3–8% higher than forecasts from the U.S. Energy Information Administration (EIA), with greenhouse gas emissions 5–7% higher and a 4–9% increase in consumer spending on vehicles and fuel. This incremental energy consumption can be offset by additional technologies for these vehicles. If most sedans were phased out in favor of larger sport utility vehicles, we find a sales share of 30% battery electric vehicles or 39% hybrid electric vehicles would equal the emissions of the EIA Reference Case.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Riders’ perceptions towards transit bus electrification: Evidence from Salt Lake City, Utah

While battery electric buses (BEBs) can lead to energy savings and reduced emissions, BEB adoption is developing slowly. Although BEBs offer quieter operations, better acceleration, and no smell of diesel or gas fumes, little focus has been placed on the user’s perspective. Here, this study investigates bus riders’ preferences toward BEBs. To achieve these objectives, a survey was designed and administered to solicit riders’ typical travel behaviors and patterns as well as preferences and opinions about BEBs’ performance in terms of emissions and noise. Statistical analysis showed that several factors influence rider perceptions towards transit bus electrification that include trip purpose, attitudes towards environmental issues and environmental impacts of BEBs, and certain non-instrumental ride factors such as ride comfort and social image. A better understanding of the importance of electrification to transit riders can help transit service providers adjust their marketing decisions and their systemwide operations to accommodate preferences towards BEBs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

NMR and Theoretical Study of In-Pore Diffusivity of Ionic Liquid–Solvent Mixtures

We report despite having a lower energy density than common batteries, electric double-layer capacitors (EDLCs) offer several advantages for high-power applications, including high power density, quick charge and discharge time, and long cycle life. Room-temperature ionic liquids (RTILs) have been intensely studied as promising electrolytes for applications in ELDCs because of their wide potential window, low volatility, as well as thermal and chemical stability. The main deficiency of neat RTILs in such applications is the sluggish diffusivity, which restricts the EDLCs’ power density. To alleviate the slow diffusivity, RTILs can be used in a mixture with organic solvents. In this study, we applied two-dimensional exchange nuclear magnetic resonance spectroscopy (2D EXSY NMR) and molecular dynamics (MD) simulations to investigate the diffusivity of anions of an RTIL, namely, 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide (BMIM + –TFSI – ), dissolved in five different organic solvents, in the micropores of activated carbon. We determined that the relative concentrations of ions in solutions in the micropores were higher than those in the bulk solutions and were also solvent-dependent. The ion diffusivities in the pores were found to be almost 2 orders of magnitude slower than in the bulk solutions, with methanol showing the largest relative disparity. These results suggested that the interactions of solvents with the activated carbon are critical not only to the power density of EDLCs but also to the energy density. The comparisons of ion diffusivities between the experiments and the MD simulations suggest the need to consider also the surface functionalities of activated carbon for the simulation of ion diffusion in the micropores of activated carbon.

electric double layer capacitors↗
DOE OSTI2022

Light-Duty Vehicle Transportation Policy and Implication on Greenhouse Gas Emissions

The transportation sector accounts for 16% of global greenhouse gas (GHG) emissions and is under formidable pressure to decarbonize. With a growing number of countries making commitments to achieve carbon neutrality or “net-zero” emissions within the next few decades, it is imperative for transportation researchers and policymakers to understand the viable pathways towards achieving carbon neutrality for light-duty transport. This chapter discusses the transportation policies and GHG emissions of the three largest markets in the world—the U.S., China, and the European Union. The life cycle GHG emissions of various vehicle technologies are evaluated while highlighting the regional and temporal differences. We then use market penetration and fleet models, developed specifically for each market, to comprehensively assess the light-duty transport energy demand and GHG emissions under various scenarios. The modeling results show that battery electric vehicles (BEVs) will increase in market share, but internal combustion engine vehicles (ICEV) will continue to dominate the passenger vehicle stock in the next 20 years under most scenarios. Improving ICEV efficiency can play a critical role in meeting GHG regulations in the near- and medium-term. BEVs, whose GHG emissions are highly dependent on the source of electricity generation, will play an essential role in the long-term as the electric grid becomes cleaner. In summary, transportation policies should be technology agnostic and consider emissions based on the whole life cycle. Moreover, a holistic approach to reducing transportation GHG emissions is key to achieving global environmental goals.

Ou, Shawn↗
DOE OSTI2023

Mechanistic origins of corrosion protection of aluminum alloys by graphene/polyetherimide nanocomposite coatings

Light-weighting vehicular components through adoption of light-metal structural alloys holds promise for reducing the fuel consumption of internal combustion engine vehicles and increasing the range of battery electric vehicles. However, the alloyed microstructure and surface precipitates of aluminum alloys render these materials susceptible to corrosion under modest excursions from neutral pH. Traditional chromium-based anodic passivation layers are subject to increasingly stringent environmental regulations, whereas options for sacrificial cathodic films are sparse for electropositive metals. While hybrid nanocomposite coatings have shown initial promise, mechanistic underpinnings remain poorly understood. Here, a fully imidized polyetherimide (PEI) resin is utilized as the continuous phase with inclusion of unfunctionalized exfoliated graphite (UFG). A comprehensive investigation of the mechanisms of corrosion protection reveals key fundamental design principles underpinning corrosion inhibition. First, strong interfacial adhesion, which for PEI is facilitated by binding of imide carbonyl moieties to Lewis acidic sites on Al surfaces. Second, the miscibility of ion-impervious nanoscopic UFG fillers and stabilization of a substantial interphase region at UFG/PEI boundaries that result in minimizing the free volume at the filler/polymer interface. Finally, extended tortuosity of ion diffusion pathways imbued by the below-percolation-threshold 2D fillers. These three design principles help govern and modulate ion transport from electrolyte/coating interfaces to the coating/metal interface and are crucial for the extended preservation of barrier properties. The results suggest an approach to systematically activate multiple modes of corrosion inhibition through rational design of hybrid nanocomposite coatings across hard-to-abate sectors where light metal alloys are likely to play an increasingly prominent role.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Near and long-term perspectives on strategies to decarbonize China's heavy-duty trucks through 2050

China needs to drastically reduce carbon dioxide (CO 2 ) emissions from heavy-duty trucks (HDTs), a key emitter in the growing transport sector, in order to address energy security concerns and meet its climate targets. We address existing research gaps by modeling feasibility, applicability, and energy and emissions impacts of multiple decarbonization strategies at different points in time. China still relies heavily on coal power, so impacts of new HDT technologies depend on the timing of their introduction relative to progress toward non-fossil power. We use a bottom-up model to simulate HDT energy consumption and CO 2 emissions through 2050. Results show that beginning to deploy battery electric and fuel-cell HDTs as early as 2020 and 2035, respectively, could achieve significant and the largest CO 2 emissions reduction by 2050 with a decarbonized power sector. However, viable near-term strategies-improving efficiency and logistics, switching to liquefied natural gas-could halve HDTs' current diesel consumption and CO 2 emissions by 2050. Our results underscore the need for a mix of near- and long-term policy and technology options to decarbonize China's HDTs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Optimization-based trip chain emulation for electrified ride-sourcing charging demand analyses

Range anxiety remains one of the key concerns for ride-sourcing drivers to adopt battery electric vehicles (BEVs). To investigate the feasibility of using BEVs for ride-sourcing services, we propose an optimization-based methodology to estimate the daily driving trip patterns of ride-sourcing vehicles based on widely available non-identifiable trip data. Furthermore, we investigate the charging needs of electrified ride-sourcing vehicles using agent-based simulation. The methodologies are illustrated through a case study in the city of Chicago. Through sensitivity analysis on driver working hours and initial charging status, we quantify the range of daily average vehicle miles traveled (VMT) per car and identify the hot spots of current public charging demand and potential unsatisfied charging demand. This study can be used to determine the priorities of future charging infrastructure investment to further mitigate range anxiety and promote the adoption of electrified ride-sourcing services

42 ENGINEERING↗
DOE OSTI2022

Modeling of RMS Current in CSI Filter Capacitor and Minimum Conduction Loss Operation of CSI-Fed PMSM Drives for Traction Applications

This paper presents a new minimum conduction loss (MCL) torque control algorithm for current source inverter- (CSI-) fed permanent-magnet synchronous machine drives that improves the overall machine drive efficiency by minimizing the combined conduction losses in the inverter and machine at each operating point. First, analytical models of conduction losses in CSI-fed motor drives are presented, and a closed-form expression for optimal d-axis stator current to achieve MCL operation is derived. An expression for the rms current in both wye- and delta-connected CSI output capacitors is derived. A detailed simulation model that emulates the operation of a 100 kW SiC CSI-fed integrated machine drive (IMD) has been developed based on experimental results and finite element analysis. This simulation model is used to evaluate the proposed MCL control algorithm applied to a CSI-fed IMD system for a battery-electric vehicle traction drive, and the predicted total drive system loss with MCL control is compared to predicted losses with maximum-torque-per-ampere (MTPA) and minimum dc-link current (MDCC) control. Results show that MCL control can achieve loss reductions compared to the other two control algorithms over a wide range of operating conditions, with significant loss reductions >20% in the medium-speed regime.

42 ENGINEERING↗
DOE OSTI2023

Silicon Carbide Inverter for Off-Road Heavy-Duty Applications: The Importance of Thermal and Thermomechanical Design in Power Electronics Packaging

Electrification of drivetrain systems is now seen as a major opportunity by the transportation industry across the globe to reduce the greenhouse gas emissions and revolutionize the travel patterns of millions of people. The cumulative number of plug-in hybrid and battery electric vehicles (EVs) sold in the United States has now surpassed 2 million in 2021, according to the International Energy Agency. The introduction of EVs in different classes of passenger vehicles and the continued drop in prices spurred by government incentives have attracted the attention of consumers despite certain barriers, such as higher initial cost and range anxiety. In the United States, the EV market share is now growing at an exponential pace, with the domestic automakers allocating a lion's share of new and future car sales to EVs. Additionally, different market studies project decreasing cost and rising sales of medium- and heavy-duty electric trucks. Although electrification initiatives are strongly pursued in the on-road passenger vehicle market, off-highway sectors, such as construction, mining, and agriculture, are also gradually implementing electric drivetrain technologies in their machineries. As EVs grow in popularity on a global scale, innovative drivetrain technologies must meet the increasing energy demand by significantly increasing system efficiency.

ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Circular economy framework for automobiles: Closing energy and material loops

Abstract Corporations, including automotive manufacturers, are increasingly exploring extended circular economy strategies as a means to enhance the sustainability of their products. The circular economy paradigm focuses on reducing nonrenewable materials and energy, promoting renewable feedstocks and energy, and keeping products/materials in use across the life cycle of a system. As such, life cycle environmental burdens associated with vehicle manufacturing, use, and disposal could potentially be reduced through circular economy strategies; however, no such comprehensive circular economy framework currently exists for the automotive industry. We develop the first circular economy schematic of automobiles, derived from the Ellen MacArthur Foundation's framework. Further, we characterize the current automotive circular economy using metrics of renewable energy and recycled materials. Specifically, for current U.S. average sedans, we find that internal combustion engine vehicles (ICEVs) use ∼6% renewable life cycle primary energy and 27% recycled materials; for battery electric vehicles (BEVs), these measures are ∼8% and 21%, respectively. On a vehicle‐miles‐traveled basis, BEVs use ∼47% less nonrenewable life cycle primary energy than ICEVs, highlighting the importance of electrification as a strategy for automotive manufacturers to reduce environmental burdens. Our proposed circular economy framework is then applied to Ford Motor Company's sustainability programs and initiatives as an example. This schematic aims to provide a starting point for the automotive industry to operationalize circular economy strategies, the application of which could advance its overall sustainability performance.

Aguilar Esteva, Laura C.↗
DOE OSTI2024

Well‐to‐wheels analysis of greenhouse gas emissions for passenger vehicles in Middle East and North Africa

Battery electric vehicles (BEVs) are widely considered a pathway to achieve low carbon mobility. BEVs emit zero emissions from the tailpipe, but their life cycle carbon reduction compared to gasoline vehicles varies based on primary energy sources, electricity generation, and use efficiency. The Middle East and North Africa (MENA) region is an area rich in fossil fuels, meriting a detailed comparison between the emissions from BEV and other powertrains. We developed a MENA‐specific life cycle model that estimates well‐to‐wheel (WTW) greenhouse gas (GHG) emissions from passenger transport with internal combustion engine vehicles (ICEVs), hybrid electric vehicles (HEVs), plug‐in hybrid electric vehicles, and BEVs. MENA's average WTW GHG emissions for all supply chain steps including combustion emissions from vehicle operation are 767 g/kWh and 84 g CO 2 eq/MJ for electricity and gasoline, respectively, but are highly variable due to heterogeneity in upstream supply chains. The use of hybrid gasoline ICEVs provides the largest emission reduction opportunity for existing vehicle fleets in 9 of the 16 MENA countries. For these nine countries, replacing gasoline ICEVs with HEVs could, on average, reduce country‐level life cycle GHG emissions by 47%. There is a similar emission reduction opportunity for 14 of the 16 MENA countries when normalizing vehicle efficiencies irrespective of the powertrain shares and other trends in existing vehicle fleets. Future scenario analysis shows that BEVs would have the lowest WTW GHG emissions among all powertrains in most MENA countries only if significantly reduced electricity transmission losses and cleaner grid mix are realized, although a high cost of infrastructure developments is expected.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Commercial Vehicle Electrification Evaluation Toolkit (CVEET)

The CVEET can identify and characterize charging and battery capacity challenges for class 3-8 commercial vehicle electrification, including battery electric and plug in hybrid vehicles for various trucks, vans and buses, over a wide range of vehicle operation. The tool can help build the understanding of the impact of commercial vehicle electrification on energy consumption, payload penalty, and GHG (i.e., CO2) emissions. The tool employs a quantitative approach to estimate electric vehicle energy consumption, characterize component performance and determine appropriate charging assumptions to conduct a comprehensive priority analysis of MD/HD vehicle electrification using public domain data.

Gao, Zhiming↗
DOE OSTI2024

Maritime Battery Electrification Simulator (MariBES) v1

MariBES is a Python-based software designed for calculating emissions and energy consumption in maritime transportation. This software is capable of performing calculations for multiple vessels, facilitating emission analysis at regional, national, and international scales. It also allows for the examination of energy consumption under various resource such as heavy fuel oil, diesel, and battery-electric, enabling the assessment of different decarbonization strategies in the maritime sector. MariBES utilizes public data on ship activities combined with detailed vessel specifications, significantly enhancing the accuracy of its simulations. This approach marks a considerable advancement over previous models that were constrained by limited spatial and temporal resolution. It features a temporal resolution based on 5-minute intervals and a spatial resolution using precise coordinates.

Moon, HeeSeung↗
DOE OSTI2021

Reinforcement Learning for Distribution Grid Optimization (PyCIGAR) v0.1

PyCIGAR is a python software package that merges off-the-shelf reinforcement learning libraries (RLLib and Ray) with electric power distribution system simulation tools (OpenDSS and a custom power flow solver built by LBL). PyCIGAR enables the training of neural networks to optimize the behavior of different components in the electric distribution grid, such as control systems in photovoltaic rooftop solar inverters and electric battery storage systems. The software package has been used to train neural networks to update settings in photovoltaic rooftop solar inverter control systems to mitigate cyber attacks on other solar photovoltaic rooftop devices.

Arnold, Daniel↗