Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “antimony”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Monolayer-by-monolayer compositional analysis of InAs/InAsSb superlattices with cross-sectional STM

In this paper, we use cross-sectional scanning tunneling microscopy (STM) to reconstruct the monolayer-by-monolayer composition profile across a representative subset of MBE-grown InAs/InAsSb superlattice layers and find that antimony segregation frustrates the intended compositional discontinuities across both antimonide-on-arsenide and arsenide-on-antimonide heterojunctions. Graded, rather than abrupt, interfaces are formed in either case. We likewise find that the incorporated antimony per superlattice period varies measurably from beginning to end of the multilayer stack. Finally, although the intended antimony discontinuities predict significant discrepancies with respect to the experimentally observed high-resolution x-ray diffraction spectrum, dynamical simulations based on the STM-derived profiles provide an excellent quantitative match to all important aspects of the x-ray data.

36 MATERIALS SCIENCE↗

Experimental Findings on Minor Actinide and Lanthanide Separations using Ion Exchange

During FY14, experimental work focused in the following areas: (1) synthesis, characterization and testing of ion-exchange materials and (2) investigating methods to oxidize americium(III) in dilute nitric acid using peroxydisulfate. Ion-exchange materials tested at SRNL included antimony silicates. Inorganic and hybrid ion-exchange materials tested previously in this project are limited to a pH of about 2. In more concentrated acid solutions, the ion-exchange material is chemically unstable or exhibits poor ion-exchange performance for metal ions. FY14 research focused on testing antimony silicates, which had been reported to exhibit good ion-exchange in 0.2 – 1.0 M nitric acid and some ion-exchange capacity in as high as 3 M nitric acid. Performance testing of archived antimony silicate samples from Prof. R. Harjula (U. Helsinki) and freshly prepared samples showed very low affinity for lanthanide ions in 0.1, 1.0 and 3.0 M nitric acid. Tests carried out in FY14 continued work initiated the previous year to understand the effects that Pu(IV) and nitrite have on the oxidation of Am(III) by peroxydisulfate. Findings indicate that both Pu(IV) and nitrite are oxidized by peroxydisulfate. Consequently, an excess of peroxydisulfate is needed to maximize the conversion of Am(III) to Am(V).

Hobbs, D. T.↗

Purification of Zirconium Tetrachloride from UNF Cladding

The overarching objective of this project was to design and demonstrate (laboratory scale) a sublimation-based purification protocol to obtain pure zirconium chloride (ZrCl 4 ) from impure feeds derived from the direct chlorination of Zircaloy cladding materials. To achieve this objective the following goals were identified. (1) Design, construct and test an apparatus capable of subliming and purifying ZrCl 4 at room pressure and temperatures between 600 and 700K (sublimation point of ZrCl 4 606 K). (2) Investigate reactions that may be used to chemically alter the makeup of the impure ZrCl 4 feed materials to enhance their removal from ZrCl 4 in the sublimation-purification process. (3) Computationally model the reactions of metal chlorides in the gas phase under sublimation conditions (1 atm, 600 K) to determine if oligomers are formed and, if formed, how they would influence sublimation-based purification strategies. All experimental investigations performed as part of this project used stable (non-radioactive) compounds and materials as surrogates for the impure ZrCl 4 feedstocks that would be derived from the direct chlorination of Zircaloy claddings from spent nuclear fuel rods. No radiologically active materials were used at any time in this project. The impure ZrCl 4 feedstocks used in this study were derived from the direct chlorination of virgin Zircaloy claddings (Zirc-2, -4 and high Nb). The main goals of the project have been achieved during the three year period of this NEUP sponsored project. The impurities of greatest concern in the feedstocks were identified as the chloride salts of the alloying metals originally found in Zircaloy (Fe, Nb) and radiological contaminants (Cs, Sr, and Sb). A series of prototype sublimation apparatuses and heating arrangements were designed, constructed and tested. A general batch-sublimator design was identified and a 1.0 kg batch sublimator/oven system was fabricated from glass. Purification protocols developed on small scale runs were found to scale to 1.0 kg batches without problem. Purification factor ranges (PFs: wt% final / wt% initial ) for the impurity chlorides identified above have been measured: Fe (40 – 500); Nb (10 – 70); Cs (520 – 5000); Sr (250 – 1900); Sb (220 – 2300). Removal of iron is sensitive to the partial pressure of hydrogen (in nitrogen) flowing through the system. Lower PFs are obtained when the hydrogen partial pressure is lower. Lower flows are required to raise the iron PF. Removal of niobium is very sensitive to the endpoint determination of the forerun. When judged properly (color change yellow to white in sublimate) reasonable PFs (500) can be achieved. However, as discussed in the conclusions section, endpoint determination can be difficult and significantly lower PFs may be obtained when the endpoint is not correctly identified. Several methods of obtaining quantitative cesium, strontium and antimony PFs were investigated, the best being ICP-MS. The results reported here reflect very limited access to and ICP-MS instrument during the course of this project. It should be noted that, while significantly reduced amounts of antimony are observed in the product, antimony is also found in the exhaust trap after the condenser. Quantum chemical computational modeling studies of the reactions of metal chlorides in the gas phase provided important information about a chemical transport mechanism that could defeat sublimation-based purification strategies. Many metal chlorides are known to oligomerize in the gas phase to reduce their coordinative unsaturation. Dimerization of ZrCl 4 with iron or niobium chlorides would provide a mechanism by which both metal impurities could be carried over with the product during sublimation of the bulk material. Computational modeling conclusively showed that under sublimation conditions in the gas phase, dimerization reactions are not favored thermodynamically due to a significant entropic penalty for the reaction. Therefore, consistent with experimental observations, sublimation-based purification strategies remain viable. The experimental part of the report concludes with a short discussion of the issues that still remain in developing a technologically relevant Zircaloy recycling strategy. The final section of the report is a summary of the quantum chemical investigation of the reactions of metal chlorides in the gas phase under sublimation conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Feasibility and Performance of Perovskite/Antimony Selenide Four-Terminal Tandem Solar Cells

The tandem solar cell presents a potential solution to surpass the Shockley–Queisser limit observed in single-junction solar cells. However, creating a tandem device that is both cost-effective and highly efficient poses a significant challenge. In this study, we present proof of concept for a four-terminal (4T) tandem solar cell utilizing a wide bandgap (1.6–1.8 eV) perovskite top cell and a narrow bandgap (1.2 eV) antimony selenide (Sb 2 Se 3 ) bottom cell. Using a one-dimensional (1D) solar cell capacitance simulator (SCAPS), our calculations indicate the feasibility of this architecture, projecting a simulated device performance of 23% for the perovskite/Sb 2 Se 3 4T tandem device. To validate this, we fabricated two wide bandgap semitransparent perovskite cells with bandgaps of 1.6 eV and 1.77 eV, respectively. These were then mechanically stacked with a narrow bandgap antimony selenide (1.2 eV) to create a tandem structure, resulting in experimental efficiencies exceeding 15%. The obtained results demonstrate promising device performance, showcasing the potential of combining perovskite top cells with the emerging, earth-abundant antimony selenide thin film solar technology to enhance overall device efficiency.

14 SOLAR ENERGY↗

Use of radiation in preparative chemistry

A summary and updating of previous work on the use of radiation chemistry for the preparation of pure materials are presented. Work was chiefly concerned with the reduction of metal salts in solution to the free metal using 2 MeV electrons. Metals deposited from aqueous solution are copper, silver, zinc, cadmium, thallium, tin, lead, antimony, iron, nickel, cobalt, and palladium. Dry organic solvents were evaluated for the deposition of metals based on a study involving deposition of antimony from soltions of antimony (III) chloride. The use of organic liquids for the preparation of anhydrous metal halides is also presented. Reaction mechanisms for both organic liquids and aqueous system are discussed.

Philipp, W. H.↗

X-ray photoemission studies of superficially oxidized cesium antimonide photoemitters

Superficially oxidized cesium antimonide photoemitting surfaces prepared in ultrahigh vacuum were studied by X-ray photoelectron spectroscopy. Oxidation of Cs3Sb to produce a surface with enhanced photosensitivity converts part of the antimony to elemental antimony and part of the cesium to cesium suboxide. The latter is identified on the basis of an O1 s peak at 531.3 eV, characteristic of Cs11O3. The production of Cs2O is not ruled out in this process since its signature at 527.5 eV is masked by an antimony shake-up peak at 527 eV.

Bates, C. W., Jr.↗

Oven rack having integral lubricious, dry porcelain surface

A lubricious glass-coated metal cooking article capable of withstanding repeated heating and cooling between room temperature and at least 500.degree. F. without chipping or cracking the glass coating, wherein the glass coating includes about 0.1 to about 20% by weight of a homogeneously distributed dry refractory lubricant material having a particle size less than about 200 .mu.m. The lubricant material is selected from the group consisting of carbon; graphite; boron nitride; cubic boron nitride; molybdenum (FV) sulfide; molybdenum sulfide; molybdenum (IV) selenide; molybdenum selenide, tungsten (IV) sulfide; tungsten disulfide; tungsten sulfide; silicon nitride (Si.sub.3N.sub.4); TiN; TiC; TiCN; TiO.sub.2; TiAlN; CrN; SiC; diamond-like carbon; tungsten carbide (WC); zirconium oxide (ZrO.sub.2); zirconium oxide and 0.1 to 40 weight % aluminum oxide; alumina-zirconia; antimony; antimony oxide; antimony trioxide; and mixtures thereof.

01 COAL, LIGNITE, AND PEAT↗

{sup 151}Eu and {sup 121}Sb Moessbauer spectroscopy of EuSbSe{sub 3} and EuBiSe{sub 3}

{sup 151}Eu and {sup 121}Sb Moessbauer spectroscopy of EuSbSe{sub 3} and EuBiSe{sub 3} were measured at different temperatures. The presence of divalent europium and trivalent antimony were confirmed. The largely negative values of the isomer shift in {sup 151}Eu spectrum show highly ionic bonding within these two compounds. Both of them show magnetic hyperfine field splitting at 4.2 K, which indicates a change in the orientation of the EFG principal axis with respect to the magnetic hyperfine field direction. EuSbSe{sub 3} has slightly smaller electron density at the antimony nuclei, compared to Sb{sub 2}Se{sub 3.} - Graphical abstract: Experimental and simulated {sup 121}Sb Moessbauer spectrum of EuSbSe{sub 3} at 77 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(GeTe){sub n}SbInTe{sub 3} (n≤3)—Element distribution and thermal behavior

Antimony in germanium antimony tellurides (GeTe){sub n}(Sb{sub 2}Te{sub 3}) can be substituted by indium. Homogeneous bulk samples of GeSbInTe{sub 4} (R3-bar m, Z=3, a=4.21324(5) Å, c=41.0348(10) Å) and Ge{sub 2}SbInTe{sub 5} (P3-bar m1, Z=1, a=4.20204(6) Å, c=17.2076(4) Å) were obtained; their structures were refined with the Rietveld method. Single-crystal X-ray diffraction using synchrotron radiation at the K edges of Sb and Te (exploiting anomalous dispersion) yields precise information on the element distribution in the trigonal layered structure of Ge{sub 3}SbInTe{sub 6} (R3-bar m, Z=3, a=4.19789(4) Å, c=62.1620(11) Å). The structure is characterized by van der Waals gaps between distorted rocksalt-type slabs of alternating cation and anion layers. The cation concentration is commensurately modulated with Sb preferring the positions near the gaps. In contrast to unsubstituted Ge{sub 3}Sb{sub 2}Te{sub 6}, quenching the NaCl-type high-temperature phase (stable above ∼510 °C) easily yields a pseudocubic modification that is metastable at ambient conditions. Temperature-dependent powder diffraction reveals a broader stability range of the cubic high-temperature modification of Ge{sub 3}SbInTe{sub 6} compared to the ternary phases. In-containing samples partially decompose at ca. 300 °C but become homogeneous again when the high-temperature phase is formed. - Graphical abstract: Crystal structure of 33R-Ge{sub 3}SbInTe{sub 6} as determined by resonant X-ray diffraction, one example of the (GeTe){sub n}SbInTe{sub 3} series of compounds investigated. - Highlights: • The new compounds 21R-GeSbInTe{sub 4}, 9P-Ge{sub 2}SbInTe{sub 5} and 33R-Ge{sub 3}SbInTe are described. • The element distribution in 33R-Ge{sub 3}SbInTe{sub 6} was determined by resonant scattering. • The cation concentration in the crystal structure is strongly modulated. • The Sb substitution by In has a significant impact on phase transitions. • Results may be relevant for thermoelectrics and thin-film phase-change materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CuPt-Ordering in High Bandgap GaxIn1-xP Alloys on Relaxed GaAsP Step Grades

We have fabricated a series of GaxIn1-xP samples over the compositional range 0.51<x<0.76 on GaAs substrates. The samples were prepared by first growing a thick step-graded layer of GaAs1-yPy to bridge the lattice misfit between the GaxIn1-xP layers and the GaAs substrate. The order parameter was tuned using a dilute antimony surfactant during growth. The composition, strain, and order parameter of each sample were characterized by x-ray diffraction, and the bandgap was measured by photoluminescence. We find good agreement between the experimentally measured bandgaps and theoretically modeled curves.

14 SOLAR ENERGY↗

Overview of SOFC Anode Interactions with Coal Gas Impurities

An overview of the results of SOFC anode interactions with phosphorus, arsenic, selenium, sulfur, antimony, and hydrogen chloride as single contaminants or in combinations is discussed. Tests were performed using both anode- and electrolyte-supported cells in synthetic and actual coal gas for periods greater than 1000 hours. Post-test analyses were performed to identify reaction products formed and their distribution, and compared to phases expected from thermochemical modeling. The ultimate purpose of this work is to establish maximum permissible concentrations for impurities in coal gas, to aid in the selection of appropriate coal gas clean-up technologies.

01 COAL, LIGNITE, AND PEAT↗

Thermoelectric properties of p-type Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2}

The thermoelectric properties of Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2} (4≤m≤16, −0.1≤x≤0.3, 1/3≤y≤2/3, 0.2≤z≤0.4; Lead Antimony Silver Tellurium Tin, LASTT-m) compositions were investigated in the temperature range of 300 to ~670 K. All samples crystallize in the average NaCl-type structure without any noticeable second phase and exhibit very narrow bandgaps of <0.1 eV. We studied a range of m values, silver concentrations (x), Pb/Sn ratios (y), and antimony concentrations (z) to determine their effects on the thermoelectric properties. The samples were investigated as melt grown polycrystalline ingots. Varying the Ag contents, the Pb/Sn ratios, and the Sb contents off-stoichiometry allowed us to control the electrical conductivity, the Seebeck coefficient, and the thermal conductivity. The electrical conductivity tends to decrease with decreasing m values. The highest ZT of ~1.1 was achieved at ~660 K for Ag{sub 0.9}Pb{sub 5}Sn{sub 5}Sb{sub 0.8}Te{sub 12} mainly due to the very low lattice thermal conductivity of ~0.4 W/(m K) around 660 K. Also, samples with charge-balanced stoichiometries, Ag(Pb{sub 1−y}Sn{sub y}){sub m}SbTe{sub m+2}, were studied and found to exhibit a lower power factor and higher lattice thermal conductivity than the Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2} compositions. - Graphical abstract: The Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2} system defines a complex and flexible class of tunable thermoelectric class of materials with high performance.

36 MATERIALS SCIENCE↗

Lead sheathing of ship hulls in the Roman period: Archaeometallurgical characterisation

An archaeometallurgical analysis of samples of lead sheathing from five ships of the Roman period was carried out in order to determine their composition and microstructure, and to obtain a better understanding of their manufacturing processes. The examinations included optical microscopy of metallographic cross-sections, microhardness tests, scanning electron microscopy, including energy dispersive spectroscopy, and X-ray photoelectron spectroscopy. The results show that the samples were all composed of lead covered with an oxide layer. The sheet thicknesses, microhardness values and microhardness distribution, as well as the grain size distribution, led to the conclusion that all of the sheets were produced by the same technology, using hammering, and were probably used for the same purpose. The presence of antimony was observed in the sample from the Roman ship from Caesarea, which may hint at an Italian (Sardinian) origin of the material, and perhaps of the ship. - Research Highlights: {yields} During the Roman period ship hulls were sheathed with lead. {yields} Five samples have been analysed for their characteristics and manufacturing process. {yields} The process was cold-working (strain-hardening) using hammering. {yields} The lead was open-casted on a flat stone, and later hammered at room temperature. {yields} Antimony in the Caesarea shipwreck may indicate an Italian origin of construction.

36 MATERIALS SCIENCE↗

Enhanced Li- and Na-storage in Sb-Graphene nanocomposite anodes

Highlights: • Antimony-graphene nanocomposite (Sb-GNP) was prepared by a wet-chemical approach. • Sb-GNP exhibits the well-dispersed Sb nanoparticles anchored on the graphenes. • Sb-GNP shows highly reversible capacities in both Li- and Na-storage. - Abstract: Antimony-graphene nanocomposite (Sb-GNP) was prepared from commercially available graphene nanoplatelets (GNPs) by a simple wet-chemical route at room temperature, and systematically investigated as an anode material for both lithium- and sodium-ion batteries (LIBs and NIBs). The microstructural features of Sb-GNP, and of pure Sb nanoparticles prepared without addition of GNPs, were characterized using X-ray diffraction, field-emission scanning electron microscopy, and high-resolution transmission electron microscopy. The successful formation of a nanocomposite structure was observed for Sb-GNP; the Sb nanoparticles are well dispersed and anchored on graphene nanoplatelets without significant aggregation of Sb nanoparticles, in contrast to the pure Sb nanoparticles. Furthermore, galvanostatic studies revealed that Sb-GNP displays better Li- and Na-storage performance than the pure Sb nanoparticles when utilized as an anode material. The enhanced electrochemical performance can be attributed to the effects of nanocomposite formation with GNPs.

36 MATERIALS SCIENCE↗

Synthesis, structure, and properties of a T-shaped 14-electron stiboranyl-gold complex.

A cyclic stiboranyl-gold complex (1) supported by two 1,8-naphthalenediyl linkers has been synthesized and structurally characterized. The gold atom of this complex adopts a T-shaped geometry and is separated from the antimony center by only 2.76 {angstrom}. Surprisingly, the trivalent gold atom of this complex is involved in an aurophilic interaction, a phenomenon typically only observed for monovalent gold complexes. This phenomenon indicates that the stiboranyl ligand possesses strong {sigma}-donating properties making the trivalent gold atom of 1 electron rich. This view is supported by DFT calculations as well as Au L{sub 3}- and Sb K-edge XANES spectra which reveal that 1 may also be described as an aurate-stibonium derivative. In agreement with this view, complex 1 shows no reactivity toward the halides Cl{sup -}, Br{sup -}, and I{sup -}. It does, however, rapidly react with F{sup -} to form an unprecedented anionic aurate fluorostiborane complex ([2]{sup -}) which has been isolated as the tetra-n-butylammonium salt. The increased coordination number of the antimony center in this anionic complex ([2]{sup -}) does not notably affect the Au-Sb separation (2.77 {angstrom}) or the geometry at the gold atom which remains T-shaped.

36 MATERIALS SCIENCE↗

Transmission electron microscopy study of GaInNAs(Sb) thin films grown by atomic hydrogen-assisted molecular beam epitaxy

The quaternary GaInNAs is a promising material system for use in next generation multijunction photovoltaic devices. We have investigated the effect of introducing antimony on the growth by using transmission electron microscopy and energy dispersive x-ray (EDX) spectroscopy. Two-dimensional growth was observed in GaInNAs films with striation features associated with compositional fluctuation and nanometer scale elemental segregation on the growth front. On the contrary, GaInNAsSb films exhibit uniform contrast throughout. EDX profile indicates uniform compositional distribution, as antimony atoms suppress the surface mobilites of adatoms resulting in a lower probability to generate the favored bonds, such as Ga-N and In-As.

36 MATERIALS SCIENCE↗

Electronic transport in heavily doped Ag/n-Si composite films

Hall measurements characterized Ag/n-Si composite films 1 micron thick produced by magnetron co-sputtering onto high resistivity Si (111) substrates at 550°C. The targets were Ag and n-type Si doped with 3 × 10{sup 19}/cm{sup 3} of antimony. Films were prepared with 13, 16 and 22 at. % Ag and measured over a temperature range 77–500°K. Conduction takes place at low temperatures by variable rang hopping in localized states at the Fermi level and by thermal activation over grain boundaries at higher temperatures. The Log Resistivity vs 1/kT curves for the three Ag concentrations vary in a similar manner, but decrease in magnitude with increasing Ag due to the smaller number of grain boundaries between Ag nanoparticles occurring with increasing Ag concentration. At low temperatures Hall mobilities are essentially independent of temperature as the carrier densities for the three Ag concentrations are constant from 77 to slightly under 300°K with resistivities varying by small amounts. The mobilities at all Ag concentrations increase with temperature and approach each other as the effects of grain boundaries become less important. This work presents for the first time the effects of metal particles embedded in a semiconductor on the transport properties of carriers in the semiconductor. Though these effects are for a given average particle size most of the results are expected to hold over a range of particle sizes. Free electrons produced in films containing 13 and 16 at. % Ag result in concentrations of 1.5 × 10{sup 19}/cm{sup 3}, one half the antimony doping, while those with 22 at. % Ag, the carrier concentrations are three orders of magnitude higher. These constant carrier concentrations are due to the metal-insulator transition that occurs in doped crystalline and polycrystalline silicon for carrier densities n{sub c} >3.9 × 10{sup 18}/cm{sup 3}. The three orders of magnitude higher carrier concentration produced in films with 22 at. % Ag is argued to be due to doping of the Si matrix by the Ag nanoparticles at this concentration, a doping effect previously observed in ErAs in InGaAs. A discussion of this doping effect is presented that is in keeping with the experimental observations though other factors such as particle size effects need further experimental confirmation. Thermal activation energies and grain boundary barrier heights were obtained from resistivity and Hall mobility data. The barrier heights of 0.360, 0.390 and 0.470 eV measured for films with Ag concentrations of 13, 16 and 22 at. % Ag respectively, are quite high compared to those obtained by other methods used for producing polycrystalline Si (10-100 mev) and need to be considerably reduced in order to increase the efficiency of the detectors for which these Ag/n-Si composite films will be used. Thermal annealing of as-deposited films is suggested as one means to accomplish this result.

36 MATERIALS SCIENCE↗

Synthesis and structural characterization of new dithiocarbamate complexes from Sb(III) and Bi(III)

Twenty new antimony and bismuth dithiocarbamate complexes which employed ten different type of amines have been successfully synthesized. The synthesized complexes with metal to dithiocarbamate ratio at 1:3. Elemental analysis of the complexes gave the general formula of MCl[S{sub 2}CNR’R”]{sub 2} where M = Sb(III), Bi(III); R’ = methyl, ethyl, propyl, isopropyl, butyl, sec-butyl, benzyl; R” = ethanol, methyl, ethyl, propyl, isopropyl, cyclohexyl, benzyl. The complexes were analysed by IR and NMR spectroscopy. The crystal structure of five-coordinated antimony (III) complex have been determined by X-ray single crystal diffraction. Single crystal X-ray diffraction studies on SbCl[S{sub 2}CN(C{sub 4}H{sub 9})(C{sub 2}H{sub 5})]{sub 2} adopted a triclinic system with a space group P1 with a = 10.0141(8) Å, b = 10.1394(7) Å, c = 11.8665(9) Å, α = 67.960°, β =87.616°, γ = 80.172°.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗