Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “alpha shapes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Bubbles and braided jets in galaxies with compact radio nuclei

Narrow-band H-alpha CCD images showing ionized gas in organized kiloparsec-scale structures in three galaxies with low-level active nuclei are presented. The edge-on spiral NGC 3079 contains an apparent loop structure which corresponds to previously reported nonthermal radio emission along the minor axis. The optical emission probably results from interaction between the ejected plasma and the ISM in the disk and halo. The S0 galaxy NGC 3998 exhibits an S-shaped structure centered on the nucleus, with no other evidence for spiral structure. In the spiral galaxy NGC 4258, the presence of continuum-free emission-line arms which coincide with the nonthermal radio arms is confirmed. The morphology of the arms suggests the presence of two double-sided jets which braid or wrap around one another and which bifurcate on both sides. It is concluded that the optical and radio emission in NGC 3079 and in NGC 4258 are related, and it is suggested that both are powered by a plasma which flows from the active nucleus and dissipates kinetic energy in the surrounding ISM.

Ford, Holland C.↗

Variable Iron K(alpha) Lines in Seyfert 1 Galaxies

We find that variability of the iron K alpha line is common in Seyfert 1 galaxies. Using data from the ASCA archive for objects that have been observed more than once during the mission, we study the time-averaged spectra from individual observations, thereby probing variability on timescales that range from days to years. Since the statistics of the data do not warrant searches for line variability in terms of a complex physical model, we use a simple Gaussian to model the gross shape of the line and then use the centroid energy, intensity, and equivalent width as robust indicators of changes in the line profile. We find that approximately 70% of Seyfert 1 galaxies (10 out of 15) show variability in at least one of these parameters: the centroid energy, intensity, and equivalent width vary in six, four, and eight sources, respectively. Because of the low signal-to-noise ratio, limited sampling, and time averaging, we consider these results to represent lower limits to the rate of incidence of variability. In most cases changes in the line do not appear to track changes in the continuum. In particular, we find no evidence for variability of the line intensity in NGC 4151, suggesting an origin in a region larger than the putative accretion disk, where most of the iron line has been thought to originate. Mrk 279 is investigated on short timescales. The time-averaged effective line energy (as measured by the Gaussian center energy, which is weighted by emission in the entire line profile) is 6.5 keV in the galaxy rest frame. As the continuum flux increases by 20% in a few hours, the Fe K line responds within approximately 10,000 seconds with the effective line energy increasing by 0.22 keV (approximately 10,500 kilometers per second). We also examine the ROSAT PSPC spectrum of Mrk 279 but find inconsistencies with ASCA. Problems with the ASCA and ROSAT calibration that affect simultaneous spectral fits at low energies are discussed in an appendix.

Weaver, K. A.↗

Exploration of the asteroids

A mission to an earth-crossing asteroid would be useful to avert a threatened collision, to utilize its resources, or for scientific investigations. Realizable launch opportunities to 1943 Anteros occur about every two years, and the 1987 and 1990 opportunities are being extensively studied. The mission craft would carry remote sensing instruments and obtain the shape, size, surface structure, rotation rate, axis of rotation and color differences of the asteroid. The chemical composition of the surface and the gravitational field would be studied. Although a free fall landing on the surface is feasible, a soft landing that takes account of the asteroid's gravity and rotation is desirable. In situ experiments would be accomplished with the aid of a penetrator fired from a tube on the mother spacecraft with the penetrator carrying an accelerometer, alpha-scattering device, water detector, magnetometer and seismometer.

French, J. R., Jr.↗

Tertiary folds of the SL5 RNA from the 5 ' proximal region of SARS-CoV-2 and related coronaviruses

Coronavirus genomes sequester their start codons within stem-loop 5 (SL5), a structured, 5' genomic RNA element. In most alpha- and betacoronaviruses, the secondary structure of SL5 is predicted to contain a four-way junction of helical stems, some of which are capped with UUYYGU hexaloops. Here, using cryogenic electron microscopy (cryo-EM) and computational modeling with biochemically determined secondary structures, we present three-dimensional structures of SL5 from six coronaviruses. The SL5 domain of betacoronavirus severe-acute-respiratory-syndrome-related coronavirus 2 (SARS-CoV-2), resolved at 4.7 Å resolution, exhibits a T-shaped structure, with its UUYYGU hexaloops at opposing ends of a coaxial stack, the T’s “arms.” Further analysis of SL5 domains from SARS-CoV-1 and MERS (7.1 and 6.4 to 6.9 Å resolution, respectively) indicate that the junction geometry and inter-hexaloop distances are conserved features across these human-infecting betacoronaviruses. The MERS SL5 domain displays an additional tertiary interaction, which is also observed in the non-human-infecting betacoronavirus BtCoV-HKU5 (5.9 to 8.0 Å resolution). SL5s from human-infecting alphacoronaviruses, HCoV-229E and HCoV-NL63 (6.5 and 8.4 to 9.0 Å resolution, respectively), exhibit the same coaxial stacks, including the UUYYGU-capped arms, but with a phylogenetically distinct crossing angle, an X-shape. As such, all SL5 domains studied herein fold into stable tertiary structures with cross-genus similarities and notable differences, with implications for potential protein-binding modes and therapeutic targets.

59 BASIC BIOLOGICAL SCIENCES↗

Rhizosphere Carbon Turnover from Cradle to Grave: The Role of Microbe–Plant Interactions

Plant roots are the primary source of organic materials that become stabilized in soil. While most root carbon is decomposed into carbon dioxide (CO 2 ), the remainder typically undergoes multiple microbial transformations before it forms longer-term associations with soil minerals. However, the mechanisms by which roots affect microbial utilization of organic materials and subsequent mineral stabilization processes are poorly understood. It is well known that living roots increase the biomass of nearby microbial communities, and shape their population dynamics, diversity, and interactions. Community assembly and metabolic potential of these rhizosphere-enriched microorganisms are strongly influenced by the chemical composition of the exudates released by the host plant. The root exudate pools of plants undergo compositional changes as they grow, reproduce, and senesce. In the well-studied annual grasses Avena barbata and Avena fatua, this changing rhizosphere substrate pool and the “bloom” of organisms that respond are phylogenetically coherent; Acidobacteria and Actinobacteria are consistently depleted, whereas Alpha and Betaproteobacteria and Bacteroidetes are reliably enriched. When compared to non-root-influenced bulk soils, the responsive community is predictably less taxon-rich, yet forms more complex networks. Finally, these rhizosphere dynamics have significant downstream effects on the colonization of nearby soil minerals, degradation of prior season’s root litters, and the balance of stabilized versus lost soil carbon.

Pett-Ridge, Jennifer↗

First observation of the decay of the 13/2 + isomer in 183 Hg and B(M 2) systematics of neutron transitions across the nuclear chart

The decay of the 13/2 + isomeric state in 183 Hg was observed for the first time following the a decay of the 13/2 + isomer in 187 Pb produced in the 142 Nd( 50 Cr, 2p3n) reaction. Using $\alpha - \gamma$ delayed coincidence measurements, the half-life of this isomer was measured to be 290(30) μs. This isomer is proposed to deexcite by an unobserved low-energy M2 transition to the known 9/2 - member of a strongly prolate-deformed 7/2 - [514] band, followed by a 105-keV M1 transition to the bandhead. A lower limit of B(M2) >= 0.018 W.u. was deduced for the unobserved transition. The presumed retardation is proposed to be due to the notable shape change between the initial, nearly spherical, and the final, strongly deformed, states. A similar scenario is also considered for the 13/2 + isomer in 181 Hg, suggesting both are cases of shape isomers. The B(M2) systematics of neutron transitions across the nuclear chart is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Steps toward determination of the size and structure of the broad-line region in active galactic nuclei. I - An 8 month campaign of monitoring NGC 5548 with IUE

Emission-line and UV continuum observations of the type I Seyfert galaxy NGC 5548 were carried out for a period of 8 months with the IUE satellite. It was found that both the continuum shape and the line ratios of NGC 5548, while being not unusual for type I Seyfert galaxies, are strongly variable. The UV continuum flux and broad emission line fluxed went through three large maxima and three deep minima; the ratio of miximum to minimum flux was about 4.5 for the continuum at 1350 A. The N V and the He II emission lines exhibited maximum-to-minimum flux ratios as high as those of the continuum; other ionization lines (Ly-alpha, C IV, and C III) exhibited smaller amplitude fluctuations, with the smallest being recorded for the Mg II line (about 1.3). It was found that, except for Mg II, the emission-line variations correlated extremely well with those of the 1350-A continuum.

Clavel, J.↗

Spectroscopic performance of Low-Gain Avalanche Diodes for different types of radiation

LGADs (Low-Gain Avalanche Diodes or Detectors) are a type of silicon Avalanche Photo-Diodes originally developed for the fast detection of minimum ionizing particles in high-energy physics experiments. Thanks to their fast timing performance, the LGAD paradigm enables detectors to accurately measure minimum ionizing particles with a timing resolution of a few tens of picoseconds. Such a performance is due to a thin substrate and the presence of a moderate signal gain. This internal gain of a few tens is enough to compensate for the reduced charge deposition in the thinner substrate and the noise of fast read-out systems. While LGADs are optimized for the detection of minimum ionizing particles for high-energy particle detectors, it is critical to study their performance for the detection of different types of particle, such as X-rays, gamma-rays, or alphas. In this paper, we evaluate the gain of three types of LGADs: two devices with different geometries and doping profiles fabricated by Brookhaven National Laboratory, and one fabricated by Hamamatsu Photonics with a different process. Since the gain in LGADs depends on the bias voltage applied to the sensor, pulse-height spectra have been acquired for bias voltages spanning from the depletion voltage up to the breakdown voltage. Finally, the signal-to-noise ratio of the generated signals and the shape of their spectra allow us to probe the underlying physics of the multiplication process.

47 OTHER INSTRUMENTATION↗

Vinculin promotes cell spreading by mechanically coupling integrins to the cytoskeleton

Mouse F9 embryonic carcinoma 5.51 cells that lack the cytoskeletal protein vinculin spread poorly on extracellular matrix compared with wild-type F9 cells or two vinculin-transfected clones (5.51Vin3 and Vin4; Samuels et al., 1993, J. Cell Biol. 121, 909-921). In the present study, we used this model system to determine how the presence of vinculin promotes cytoskeletal alterations and associated changes in cell shape. Microscopic analysis of cell spreading at early times, revealed that 5.51 cells retained the ability to form filopodia; however, they could not form lamellipodia, assemble stress fibers, or efficiently spread over the culture substrate. Detergent (Triton X-100) studies revealed that these major differences in cell morphology and cytoskeletal organization did not result from differences in levels of total polymerized or cross-linked actin. Biochemical studies showed that 5.51 cells, in addition to lacking vinculin, exhibited slightly reduced levels of alpha-actinin and paxillin in their detergent-insoluble cytoskeleton. The absence of vinculin correlated with a decrease in the mechanical stiffness of the integrin-cytoskeleton linkage, as measured using cell magnetometry. Furthermore, when vinculin was replaced by transfection in 5.51Vin3 and 5.51Vin4 cells, the levels of cytoskeletal-associated alpha-actinin and paxillin, the efficiency of transmembrane mechanical coupling, and the formation of actin stress fibers were all restored to near wild-type levels. These findings suggest that vinculin may promote cell spreading by stabilizing focal adhesions and transferring mechanical stresses that drive cytoskeletal remodeling, rather than by altering the total level of actin polymerization or cross-linking.

NASA Program Space Biology↗

The Kepler Light Curves of V1504 Cygni and V344 Lyrae: A Study of the Outburst Properties

We examine the Kepler light curves of V1504 Cyg and V344 Lyr, encompassing approximately 460 d at 1 min cadence. During this span each system exhibited approximately 40 outbursts, including four superoutbursts. We find that, in both systems, the normal outbursts lying between two superoutbursts increase in duration by a factor approximately 1.2 - 1.7, and then reset to a small value after the following superoutburst. In V344 Lyr the trend of quiescent intervals between normal outbursts is to increase to a local maximum about half way through the supercycle the interval from one superoutburst to the next - and then to decrease back to a small value by the time of the next superoutburst, whereas for V1504 Cyg the quiescent intervals are relatively constant during the supercycle. Both of these trends are inconsistent with the Osaki's thermal-tidal model, which robustly predicts a secular increase in the quiescent intervals between normal outbursts during a supercycle. Also, most of the normal outbursts have an asymmetric, fast-rise/slower-decline shape, which would be consistent with outbursts triggered at large radii. The exponential rate of decay of the plateau phase of the superoutbursts is 8 d mag(sup -1) for approximately 1504 Cyg and 12 d mag(sup -1) for V344 Lyr. This time scale gives a direct measure of the VISCOUS time scale III the outer accretion disk given the expectation that the entire disk is in the hot, viscous state during superoutburst. The resulting constraint on the Shakura-Sunyaev parameter, alpha(sub hot) approximately equal to 0.1, is consistent with the value inferred from the fast dwarf nova decays. By looking at the slow decay rate for superoutbursts, which occur in systems below the period gap, in combination with the slow decay rate in one long outburst above the period gap (in U Gem), we infer a steep dependence of the decay rate on orbital period for long outbursts. We argue that this relation implies a steep dependence of alpha(sub cold) on orbital period, which may be consistent with recent findings of Patterson, and is consistent with tidal torquing as being the dominant angular momentum transport mechanism in quiescent disks in interacting binary systems.

Cannizzo, John K.↗

Coil optimization for quasi-helically symmetric stellarator configurations

Filament-based coil optimizations are performed for several quasi-helical stellarator configurations, beginning with the one from Landreman & Paul ( Phys. Rev. Lett. , vol. 128, 2022, 035001), demonstrating that precise quasi-helical symmetry can be achieved with realistic coils. Several constraints are placed on the shape and spacing of the coils, such as low curvature and sufficient plasma–coil distance for neutron shielding. The coils resulting from this optimization have a maximum curvature 0.8 times that of the coils of the Helically Symmetric eXperiment (HSX) and a mean squared curvature 0.4 times that of the HSX coils when scaled to the same plasma minor radius. When scaled up to reactor size and magnetic field strength, no fast particle losses were found in the free-boundary configuration when simulating 5000 alpha particles launched at $3.5\,\mathrm {MeV}$ on the flux surface with a normalized toroidal flux of $s=0.5$ . An analysis of the tolerance of the coils to manufacturing errors is performed using a Gaussian process model, and the coils are found to maintain low particle losses for smooth, large-scale errors up to amplitudes of approximately $0.15\,\mathrm {m}$ . Another coil optimization is performed for the Landreman–Paul configuration with the additional constraint that the coils are purely planar. Visual inspection of the Poincaré plot of the resulting magnetic field-lines reveal that the planar modular coils alone do a poor job of reproducing the target equilibrium. Additional non-planar coil optimizations are performed for the quasi-helical configuration with $5\,\%$ volume-averaged plasma beta from Landreman et al. ( Phys. Plasma , vol. 29, issue 8, 2022, 082501), and a similar configuration also optimized to satisfy the Mercier criterion. The finite beta configurations had larger fast-particle losses, with the free-boundary Mercier-optimized configuration performing the worst, losing approximately $5.5\,\%$ of alpha particles launched at $s=0.5$ .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The photospheric velocity field of Procyon

Balloon-borne Ultraviolet Stellar Spectrometer observations of the profiles of two well observed spectral lines in the ultraviolet spectrum of Alpha CMI (Procyon; F5IV-V) are analyzed with a Fourier transform method in order to determine values of various parameters of the velocity field of the upper photosphere. A microturbulent line-of-sight velocity component of 0.9 + or - 0.4 km/s, a macroturbulent velocity component of 5.3 + or - 0.2 km/s, and a rotational velocity component of 10.0 + or - 1.2 km/s were determined. In these calculations a single-moded sinusoidal isotropic macroturbulent velocity function was assumed. The result appears to be sensitive to the assumed shape of the macroturbulence function.

De Jager, C.↗

Materials Data on Se2NCl5 by Materials Project

N2(Se2Cl5)2 is alpha carbon monoxide-like structured and crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of eight ammonia molecules and eight Se2Cl5 clusters. In four of the Se2Cl5 clusters, there are two inequivalent Se1+ sites. In the first Se1+ site, Se1+ is bonded in a 3-coordinate geometry to three Cl1- atoms. There are a spread of Se–Cl bond distances ranging from 2.22–2.77 Å. In the second Se1+ site, Se1+ is bonded in a distorted T-shaped geometry to three Cl1- atoms. There are a spread of Se–Cl bond distances ranging from 2.24–2.70 Å. There are five inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a single-bond geometry to one Se1+ atom. In the second Cl1- site, Cl1- is bonded in a single-bond geometry to one Se1+ atom. In the third Cl1- site, Cl1- is bonded in a single-bond geometry to one Se1+ atom. In the fourth Cl1- site, Cl1- is bonded in a single-bond geometry to one Se1+ atom. In the fifth Cl1- site, Cl1- is bonded in a 2-coordinate geometry to two Se1+ atoms. In four of the Se2Cl5 clusters, there are two inequivalent Se1+ sites. In the first Se1+ site, Se1+ is bonded in a 3-coordinate geometry to three Cl1- atoms. There are a spread of Se–Cl bond distances ranging from 2.22–2.72 Å. In the second Se1+ site, Se1+ is bonded in a distorted T-shaped geometry to three Cl1- atoms. There are a spread of Se–Cl bond distances ranging from 2.22–2.71 Å. There are five inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a single-bond geometry to one Se1+ atom. In the second Cl1- site, Cl1- is bonded in a single-bond geometry to one Se1+ atom. In the third Cl1- site, Cl1- is bonded in a single-bond geometry to one Se1+ atom. In the fourth Cl1- site, Cl1- is bonded in a 2-coordinate geometry to two Se1+ atoms. In the fifth Cl1- site, Cl1- is bonded in a single-bond geometry to one Se1+ atom.

36 MATERIALS SCIENCE↗

Near-Infrared Interferometric Images of the Solar System Sized Disk Surrounding the Herbig Ae/Be Star MWC 349A

We present images of the Herbig Ae/Be star MWC 349A at 1.65 and 2.27, and 3.08 micrometers, reconstructed from complex visibility data obtained with an aperture masking interferometric technique on the Keck I telescope. These images have an approximately elliptical shape, and are consistent with the expected shape of a nearly edge-on Keplerian disk. Visibility data were fitted with uniform ellipses with major axes 36 +/- 2, 47 +/- 2, and 62 +/- 1 mas, respectively. The axial ratio of the ellipses is approximately 0.5 +/- 0.1, and the major axis is at a position angle of 100 +/- 3 degrees, consistent with the position angle of the dark lane observed previously in the Very Large Array (VLA) radio continuum maps at 8 and 22 GHz, perpendicular to the symmetry axis of the bipolar lobes of H66(alpha) recombination line emission, and consistent with positions of the recombination line maser spots at 1.3 mm. At an assumed distance of 1.2 kpc, the linear sizes of the disk are 44 and 57 AU at 1.65 and 2.2 micrometers, respectively. The disk is the presumed source of ionized material in the bipolar outflow and ultracompact HII region around the star.

Danchi, W.C.↗

Comparison of the X-Ray and Radio Light Curves of Quasar PKS 1510--089

We present results for the X-ray-bright superluminal AGN PKS 1510-089 (z=0.36) monitored weekly with the Rossi X-Ray Timing Explorer for the past four years in order to study the origin of X-ray emission from this extremely variable blazer. These RXTE data are compared with weekly cm-band flux and polarization observations from the Michigan Diameter telescope, to identify correlated activity and associated frequency-dependent time delays for constraining X-ray emission models; and bimonthly 7mm VLBA total and linearly polarized intensity imaging to identify temporal associations between X-ray events and the ejection of superluminal components and disturbances in the magnetic field, to test if the X-ray energy release is related to changes in the inner jet flow. Both the X-ray (2-20 keV) and radio flux are highly variable on timescales of weeks. The VLBA mas structure is dominated by a bright core with a weak jet; both the ejection of very fast superluminal knots and changes in the fractional polarization and EVPA of the core on timescales of one to four months are identified. Two outbursts in 1997 are well-resolved in both the centimeter and X-ray bands. Both the strong temporal association and the similar outburst shape support a causal relation, and a discrete cross-correlation analysis identifies that the X-ray lags the radio by 16 days during the bursts. Starting in 1998 the behavior changes: the correlation is weaker with the X-ray possibly leading the radio by six days. During the full time window there is a correlation between bands as expected if the radio photons are upscattered to X-ray energies. The time correlations and difference between the flat X-ray spectral index (0.0 <= alpha <= 0.5 where F(sub v) is proportional to v(exp -alpha)), and the mm-wave synchrotron spectrum (alpha = 0.8) are discussed within the framework of viable SSC models.

Aller, M. F.↗

Solidification Using a Baffle in Sealed Ampoules (SUBSA)

Solidification Using a Baffle in Sealed Ampoules (SUBSA) will be the first materials science experiment conducted in the Microgravity Science Glovebox (MSG) Facility at the International Space Station (ISS) Alpha. The launch is schedule for May 31, 2002. Using the specially developed furnace, 10 Te and Zn-doped single crystals of InSb will be directionally solidified in microgravity. A key goal of the SUBSA investigation is to (i) clarify the origin of the melt motion in space laboratories and (ii) to reduce the magnitude of the melt motion to the point that it does not interfere with the transport phenomena. These goals will be accomplished through a special ampoule and furnace design. A disk-shaped baffle, positioned close to the freezing front, is used to reduce melt motion. Furthermore, the solidification will be visualized by using a transparent furnace, with a video camera, continuously sending images to the earth. This allows detection of bubbles and melt de-wetting that could cause surface tension driven convection. In preparation for the space experiments, 30 ground-based experiments were conducted. The results of ground based tests and numerical modeling will be presented. Based on numerical modeling, 12 mm 1D silica ampoules were selected. The small diameter ampoule favors closer placement of the baffle to the interface, without excessive radial segregation caused by forced convection while providing more damping of natural convection. The parts in the silica ampoule include 2 carbon springs made by Energy Science Laboratories, Inc., a pyrocarbon-coated graphite cylinder, pyrocarbon-coated graphite a baffle with the shaft and the InSb charge with the seed crystal grown by W.A. Bonner of Crystallod Inc.

Marin, C.↗

Theta(1) and gamma Tauri: Understanding the coronal structure of Hyades giants. EUV spectroscopy of BY Dra systems

These programs involve: (1) analysis and interpretation of EUVE spectrometer observations of the active giant beta Cet in comparison to the Hyades giant theta(1) Tau, and (2) analysis and interpretation of EUVE spectrometer observations of the BY Dra systems FK Aqr, DH Leo, and BH Lyn. EUVE carried out observations of beta Cet, but has yet to perform an observation of theta(1) Tau. In beta Cet, a number of Fe lines from high ionization species were observed, up to Fe XXIV. The spectrum overall resembles that seen in the active binary Capella (alpha Aur). All three BY Dra systems were observed by EUVE, and show evidence of high temperature (approximately 10(exp 7) K) plasma; FK Aqr and DH Leo show significant variability in their Deep Survey lightcurves. In FK Aqr, spectral differences between its 'quiescent' and 'active' states suggest possible differences in the plasma density. In DH Leo, the Deep Survey lightcurve, taken over nearly 8 days, shows a distinct period of approximately 1.05 days, similar to the photometric period. The emission measure distributions of all three systems are rather similar in shape, and can be well-represented by a power law with slope approximately 1.5 from 6.2-7.0 in log T.

Stern, Robert A.↗

Materials Data on ICl3 by Materials Project

ICl3 is alpha Niobium phosphide-derived structured and crystallizes in the triclinic P-1 space group. The structure is zero-dimensional and consists of one ICl3 cluster. I is bonded in a rectangular see-saw-like geometry to four Cl atoms. There are a spread of I–Cl bond distances ranging from 2.39–2.74 Å. There are three inequivalent Cl sites. In the first Cl site, Cl is bonded in a single-bond geometry to one I atom. In the second Cl site, Cl is bonded in an L-shaped geometry to two equivalent I atoms. In the third Cl site, Cl is bonded in a single-bond geometry to one I atom.

36 MATERIALS SCIENCE↗