Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Zn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Designing a Zn–Ag Catalyst Matrix and Electrolyzer System for CO 2 Conversion to CO and Beyond

CO 2 emissions can be transformed into high-added-value commodities through CO 2 electrocatalysis; however, efficient low-cost electrocatalysts are needed for global scale-up. Inspired by other emerging technologies, the authors report the development of a gas diffusion electrode containing highly dispersed Ag sites in a low-cost Zn matrix. Here, this catalyst shows unprecedented Ag mass activity for CO production: –614 mA cm –2 at 0.17 mg of Ag. Subsequent electrolyte engineering demonstrates that halide anions can further improve stability and activity of the Zn–Ag catalyst, outperforming pure Ag and Au. Membrane electrode assemblies are constructed and coupled to a microbial process that converts the CO to acetate and ethanol. Combined, these concepts present pathways to design catalysts and systems for CO 2 conversion toward sought-after products.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electroactive ZnO: Mechanisms, Conductivity, and Advances in Zn Alkaline Battery Cycling

Zinc oxide is of great interest for advanced energy devices because of its low cost, wide direct bandgap, non-toxicity, and facile electrochemistry. In zinc alkaline batteries, ZnO plays a critical role in electrode passivation, a process that hinders commercialization and remains poorly understood. Here, novel observations of an electroactive type of ZnO formed in Zn-metal alkaline electrodes are disclosed. The electrical conductivity of battery-formed ZnO is measured and found to vary by factors of up to 10 4 , which provides a first-principles-based understanding of Zn passivation in industrial alkaline batteries. Simultaneous with this conductivity change, protons are inserted into the crystal structure and electrons are inserted into the conduction band in quantities up to ≈10 20 cm –3 and ≈1 mAh gZnO –1 . Electron insertion causes blue electrochromic coloration with efficiencies and rates competitive with leading electrochromic materials. The electroactivity of ZnO is evidently enabled by rapid crystal growth, which forms defects that complex with inserted cations, charge-balanced by the increase of conduction band electrons. Furthermore, this property distinguishes electroactive ZnO from inactive classical ZnO. Knowledge of this phenomenon is applied to improve cycling performance of industrial-design electrodes at 50% zinc utilization and the authors propose other uses for ZnO such as electrochromic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Large Enhancements in Optical and Piezoelectric Properties in Ferroelectric Zn 1- x Mg x O Thin Films through Engineering Electronic and Ionic Anharmonicities

Multifunctionality as a paradigm requires materials exhibiting multiple superior properties. Integrating second-order optical nonlinearity and large bandgap with piezoelectricity can, for example, enable broadband, strain-tunable photonics. Though very different phenomena at distinct frequencies, both second-order optical nonlinearity and piezoelectricity are third-rank polar tensors present only in acentric crystal structures. However, simultaneously enhancing both phenomena is highly challenging since it involves competing effects with tradeoffs. Recently, a large switchable ferroelectric polarization of ≈80 μC cm –2 was reported in Zn 1-x Mg x O films. Here, ferroelectric Zn 1-x Mg x O is demonstrated to be a platform that hosts simultaneously a 30% increase in the electronic bandgap, a 50% enhancement in the second harmonic generation (SHG) coefficients, and a near 200% improvement in the piezoelectric coefficients over pure ZnO. These enhancements are shown to be due to a 400% increase in the electronic anharmonicity and a ≈200% decrease in the ionic anharmonicity with Mg substitution. Precisely controllable periodic ferroelectric domain gratings are demonstrated down to 800 nm domain width, enabling ultraviolet quasi-phase-matched optical harmonic generation as well as domain-engineered piezoelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Organo‐Functionalized Lacunary Double Cubane‐Type Oxometallates: Synthesis, Structure, and Properties of [(M II Cl) 2 (V IV O) 2 {((HOCH 2 CH 2 )(H)N(CH 2 CH 2 O))(HN(CH 2 CH 2 O) 2 )} 2 ] (M=Co, Zn)

Abstract Organofunctionalized tetranuclear clusters [(M II Cl) 2 (V IV O) 2 {((HOCH 2 CH 2 )(H)N(CH 2 CH 2 O))(HN(CH 2 CH 2 O) 2 )} 2 ] (1, M=Co,2: M=Zn) containing an unprecedented oxometallacyclic {M 2 V 2 Cl 2 N 4 O 8 } (M=Co, Zn) framework have been prepared by solvothermal reactions. The new oxo‐alkoxide compounds were fully characterized by spectroscopic methods, magnetic susceptibility measurement, DFT and ab initio computational methods, and complete single‐crystal X‐ray diffraction structure analysis. The isostructural clusters are formed of edge‐sharing octahedral {VO 5 N} and trigonal bipyramidal {MO 3 NCl} units. Diethanolamine ligates the bimetallic lacunary double cubane core of1and2in an unusual two‐mode fashion, unobserved previously. In the crystalline state, the clusters of1and2are joined by hydrogen bonds to form a three‐dimensional network structure. Magnetic susceptibility data indicate weakly antiferromagnetic interactions between the vanadium centers [J iso (V IV −V IV )=−5.4(1); −3.9(2) cm −1 ], and inequivalent antiferromagnetic interactions between the cobalt and vanadium centers [J iso (V IV −Co II )=−12.6 and −7.5 cm −1 ] contained in1.

Chemistry↗
DOE OSTI2021

High-precision measurements of half-lives for 69 Ge, 73 Se, 83 Sr, 85 mSr, and 63 Zn radionuclides relevant to the astrophysical p-process via photoactivation at the Madison Accelerator Laboratory

The ground state half-lives of 69 Ge, 73 Se, 83 Sr, 63 Zn, and the half-life of the 1/2 - isomer in 85 Sr have been measured with high precision using the photoactivation technique at an unconventional bremsstrahlung facility that features a repurposed medical electron linear accelerator. The γ -ray activity was counted over about 6 half-lives with a high-purity germanium detector, enclosed into an ultra low-background lead shield. The measured half-lives are: T 1/2 ( 69 Ge) = 38.82 ± 0.07 (stat) ± 0.06 (sys) h; T 1/2 ( 73 Se) = 7.18 ± 0.02 (stat) ± 0.004 (sys) h; T 1/2 ( 83 Sr) = 31.87 ± 1.16 (stat) ± 0.42 (sys) h; T 1/2 ( 85m Sr) = 68.24 ± 0.84 (stat) ± 0.11 (sys) min; T 1/2 ( 63 Zn) = 38.71 ± 0.25 (stat) ± 0.10 (sys) min. These high-precision half-life measurements will contribute to a more accurate determination of corresponding ground-state photoneutron reaction rates, which are part of a broader effort of constraining statistical nuclear models needed to calculate stellar nuclear reaction rates relevant for the astrophysical p -process nucleosynthesis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Rapid microwave-assisted preparation of high-performance bifunctional Ni3Fe/Co-N-C for rechargeable Zn-air battery

Precious metal-free bifunctional catalysts offer scalable possibilities for achieving oxygen cathodes in rechargeable metal-air batteries. Literature thus far suggests that the oxygen reduction and evolution reactions (i.e ORR and OER) take place at different active sites. However, the design and preparation of oxygen electrocatalysts with high-performance is still a great challenge. This work develops a general approach to introduce a nanoparticle that offers oxygen evolution reaction sites onto an oxygen reduction reaction catalyst via rapid microwave treatment. The metal–organic frameworks (Co, ZIF-8) derived Co-N-C with high ORR performance is employed as a support to homogeneously disperse OER active Ni3Fe nanoparticles. Potentials of 1.54 V and 0.79 V have been achieved at current densities of 10 mA cm -2 for OER and 3 mA cm -2 toward ORR, respectively. The developed rechargeable Zn-air battery assembled with Ni 3 Fe/Co-N-C as an oxygen-electrode exhibits superior efficiency and robust durability, exceeding that of commercial Pt/C + IrO 2 . Furthermore, the satisfactory activity of our fabricated wristband shows the successfully practical application of flexible Zn-air batteries for wearable devices.

25 ENERGY STORAGE↗
DOE OSTI2021

Cu- and Zn-doped alkali activated mortar – Properties and durability in (bio)chemically aggressive wastewater environments

Metakaolin-based alkali activated mortars (AAM) - with and without CuSO{sub 4}·5H{sub 2}O and ZnO addition (mass ratio M{sup n+}/solid binder 0.08% to 1.7%) - were casted and exposed within an extensive long-term field campaign over the period of 20 months to a sewer basin, strongly affected by biogenic acid corrosion. (Un-)exposed AAM were tested regarding their physicochemical and microstructural properties, bioreceptivity and overall durability. Metal addition led to a retarding effect during alkali-activation reaction, as well as to an increase in open porosity of up to 3.0% and corresponding lower compressive strength of up to 10.9%. Reduced microbial colonization and diversity were observed on AAM with Cu, while Zn addition led to increased biodiversity. We propose that the observed higher durability of Cu-doped AAM is due to antibacterial effects and associated reduction of biogenic acid production, superseding overall negative effects of metal-dosage on physical material properties. Observed lower durability of Zn-doped AAM was related to combined negative physicochemical and microbial effects.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of crystallite size on lithium storage performance of high entropy oxide (Cr 0.2 Mn 0.2 Co 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 nanoparticles

High-entropy oxides (HEOs), known for their high theoretical capacity and structural stability, are considered promising anode materials for next-generation lithium-ion batteries (LIBs). In this research, we synthesized a novel spinel-type HEO, (Cr 0.2 Mn 0.2 Co 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 , using a solution combustion method. By adjusting the quantity of the combustion agent, we produced samples with varying crystallite sizes. The crystallite size of the HEOs initially enlarges with an increased combustion agent, then diminishes. The enhancement of crystallite size correlates with improved electrochemical performance for lithium storage. Notably, the (Cr 0.2 Mn 0.2 Co 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 nanoparticles, with the largest crystallite size of 36.3 nm, demonstrated a reversible capacity of 343 mA h g -1 after 100 cycles at 100 mA g -1 , a capacity retention to 319 mA h g -1 after 1000 cycles at 1 A g -1 , and a commendable rate capability of 260 mA h g -1 at 2 A g -1 . Furthermore, this study underscores the pivotal role of crystallite size in LIB performance and presents a viable strategy to enhance the lithium storage capabilities of HEOs and other metal oxides.

25 ENERGY STORAGE↗
DOE OSTI2022

Densification of the entropy stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O

The first entropy-stabilized oxide, (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O, was reported in 2015. Initial studies synthesized this material using solid state processing and were limited to densities < 80%. Here, we report a straightforward solid state route to sinter samples to densities up to 98% of the theoretical by identifying the role of oxygen and promoting the resulting mechanisms in densification. Previous works have studied effects of cation stoichiometry on the entropy-driven reaction to form a single phase, but few have explored the associated effects of anion stoichiometry and/or redox chemistry on both phase stability and densification. We demonstrate here that tuning heating rate and pO 2 during heating of initially-homogeneous calcined powders can enhance densifying diffusion processes and enable reliable sintering of dense (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O samples.

MATERIALS SCIENCE↗
DOE OSTI2022

S K-edge XAS of Cu Ⅱ , Cu Ⅰ , and Zn Ⅱ oxidized Dithiolene complexes: Covalent contributions to structure and the Jahn-Teller effect

We report reduced dithiolene ligands are bound to high valent Mo centers in the active site of the oxotransferase family of enzymes. Related model complexes have been studied with great insight by Prof. Holm and his colleagues. This study focuses on the other limit of dithiolene chemistry: an investigation of the 2-electron oxidized dithiolene bound to low-valent late transition metal (TM) ions (Zn II , Cu I , and Cu II ). The bonding descriptions of the oxidized dithiolene [N,N-dimethyl piperazine 2,3-dithione (Me 2 Dt 0 )] complexes are probed using S K-edge X-ray absorption spectroscopy (XAS) and the results are correlated to density functional theory (DFT) calculations. These experimentally supported calculations are then extended to explain the different geometric structures of the three complexes. The Zn II (Me 2 Dt 0 ) 2 complex has only ligand-ligand repulsion so it is stabilized at the D 2d symmetry limit. The Cu I (Me 2 Dt 0 ) 2 complex has additional weak backbonding thus distorts somewhat from D 2d toward D 2h symmetry. The Cu II (Me 2 Dt 0 ) 2 complex has a strong σ donor bond that leads to both a large Jahn-Teller stabilization to D 2h and an additional covalent contribution to the geometry. The combined strong stabilization results in the square planar, D 2h structure. This study quantifies the competition between the ligand-ligand repulsion and the change in electronic structures in determining the final geometric structures of the oxidized dithiolene complexes, and provides quantitative insights into the Jahn-Teller stabilization energy and its origin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electronic tuning of confined sub-nanometer cobalt oxide clusters boosting oxygen catalysis and rechargeable Zn–air batteries.

Reasonable design of robust bifunctional oxygen catalysts from an electronic structure perspective is intriguing and challenging for the development of high active rechargeable zinc-air batteries (ZABs). In this study, the favorable regulation of the electronic structure of the cobalt oxide nanoclusters was firstly predicted by density functional theory (DFT) simulation, and then experimentally verified by confining sub-nanometer CoOx clusters (0.86 nm) into the small pore of ZIF-8 derived N-doped nanomaterials (PNC) using a microporous MOFs confinement strategy. The confined effect of the MOF micropores not only enhanced the stability of the subnanometer cobalt oxide clusters, but also make it coupled with Co-Nx to further regulate the electronic structure of the former, synergistic resulting in enhanced ORR/OER actives. As a result, the optimized 0.05CoOx@PNC catalyst demonstrates outstanding bifunctional oxygen performance with a smaller potential gap of 0.67 V. Moreover, the rechargeable Zn-air batteries integrated 0.05CoOx@PNC air cathode displays encouraging performance with a peak power density of 157.1 mW cm(-2), a specific capacity of 887 mAh g(Zn)(-1)at 10 mA cm(-2) and long-term cyclability for over 200 h, significantly outperforming the benchmark electrode couple consisted of Pt/C/RuO2. DFT calculation further revealed that reducing particle size and coupling with Co-N could effectively regulate the charge distribution of CoOx nanoclusters and downshift the D-band center of Co adsorption sites in CoOx nanoclusters, which reduced the reaction barrier of intermediate O-2* and OH* and ORR/ OER over potential, thus accelerating the overall ORR/OER kinetic process. This work offers a novel reference for the construction of a robust sub-nanometer cluster catalysts in the field of ZABs.

Bifunctional oxygen electrocatalysts↗
DOE OSTI2022

Bandgap engineering of Cd 1 - x Zn x Te 1 - y Se y ( 0 < x < 0 . 27 , 0 < y < 0 . 026 )

CdZnTe (CZT) detectors with more than 10% zinc content did not show a remarkable improvement in the detector performance due to the additional defects introduced by the higher zinc content. However, recent research showed that the formation of defects was suppressed effectively by adding a small amount of selenium (2%) in CZT. On this basis, we attempted to enhance the detector performance through bandgap engineering by increasing the zinc content up to 25 %, while adding 2 % of selenium. Multiple CdZnTeSe (CZTS) ingots with Zn = 10, 12.5, 15, 20 and 25%, while fixing the Se composition at 2%, were grown by the Bridgman method. The bandgap of CZTS for the different Zn and Se contents was analyzed and then equations for predicting the bandgap for other alloy compositions were introduced. Furthermore, the crystallinity of CZTS was evaluated by photoluminescence measurements. The pulse height spectra for Am-241 and Co-57 sources were used to evaluate the detector performance for the CZTS samples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Evidence for metal sources, fluid-mixing processes, and S isotope recycling within the feeder zone of an Irish type Zn-Pb deposit

The origin and evolution of fluids in Irish-type Zn-Pb deposits remains debated, particularly regarding the mobility of metals such as Cu and Ni, sources of sulphur, and the role of fluid mixing and replacement. The Lisheen Zn-Pb deposit, Ireland, offers a well-defined natural laboratory to investigate these questions. While most studies have focused on the Waulsortian Limestone Formation, the primary sulphide host, less is known about mineralisation in underlying units, such as the Lisduff Oolite Member (LOM). The LOM displays enrichment in Cu and Ni and displays intense replacement textures compared to other hosts at Lisheen, making it an ideal target for studying metal mobility and sulphur recycling in carbonate-hosted systems. Through characterising and studying LOM-hosted sulphides, valuable insights into mineralisation processes, especially related to Cu-Ni metals, can be defined. This study integrates petrography, EMPA, and in situ sulphur isotope (δ 34 S) analysis to investigate sulphide paragenesis, mineral chemistry, and fluid evolution across LOM ore zones. Results reveal a multistage mineralising system involving extensive replacement of early pyrite (Py0, δ 34 S = −28.4 to −21.9 ‰) by sphalerite and galena, with zoned pyrite (Py1) enriched in As-Cu-Ni-Tl. The δ 34 S values and trace element trends indicate mixing between hydrothermal and bacteriogenic sulphur-rich fluids, with evidence for sulphur recycling during replacement. Pyrite textures and compositions capture this evolving fluid regime, with trace element enrichment linked to paragenetic stage. The steel ore region, adjacent to major fault intersections, records intense hydrothermal fluid interaction, hosting Ni- and As-rich phases such as nickeline, gersdorffite, and arsenopyrite. These findings highlight the importance of structural controls and fluid mixing in metal transport and deposition, positioning the LOM as a key stratigraphic unit for understanding ore-forming processes in Irish-type systems. These results have implications for targeting similar carbonate-hosted systems globally, especially where deeper or structurally complex ore zones remain underexplored.

58 - GEOSCIENCES↗
DOE OSTI2023

Synthesis of uranium mixed anion compounds synthesized using the Boron-Chalcogen Mixture method: Ba 6 Co 6 U 0·9 1S 13·5 O 0.5 and Ba 5·47 K 0·53 Zn 6 US 13·5 O 0.5

Mixed anion compounds have exhibited interesting structures and properties that differ from compounds only incorporating a single anion in their composition. Unfortunately, difficulties in the synthetic methods used to obtain these materials has slowed the evolution of this field, prompting investigations into alternate synthetic pathways to these materials. Our recently establish Boron-Chalcogen Mixture (BCM) method, which was originally developed for the synthesis of pure actinide chalcogenides from oxides, has been adapted to achieve the partial oxide to sulfide conversion of Ba 2 MUO 6 (M = Co, Zn) which resulted in two new uranium (IV/V) oxysulfide compounds, Ba 6 Co 6 U 0·91 S 13·5 O 0.5 and Ba 5·47 K 0·53 Zn 6 US 13·5 O 0.5 These compounds crystallize in the tetragonal crystal system adopting the space group I4/mcm. Finally, their syntheses, crystal structures, and trends observed in the pursuit of these new mixed anion compounds are reported.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

From Cation Order to Disorder: Unlocking Ion Transport Pathways in Li–Zn–Zr–Cl Halospinels

Lithium metal chloride halospinels of the general formula Li 2 MCl 4 are a promising class of earth-abundant ion conductors for all-solid-state batteries. However, poor roomtemperature ionic conductivity has historically limited their use in practical applications. Here, we substitute Zr 4+ into Li 2 ZnCl 4 along the series Li 2−2x/3 Zn 1−x Zr 2x/3 Cl 4 (x = 0, 0.1, 0.3, 0.4, 0.6, 0.9, and 1.0) to understand how cation disorder and vacancy tuning impact ion transport in “normal” halospinels. Aliovalent Zr 4+ substitution increases ionic conductivity by nearly 5 orders of magnitude, from 1.320(3) × 10 −9 S cm −1 in Li 2 ZnCl 4 to 6.74(1)× 10 −5 S cm −1 for x = 0.6. Average and local structure characterization through synchrotron X-ray diffraction (SXRD) and neutron pair distribution function (nPDF) analysis reveal that Zr 4+ redistributes the Zn 2+ and Li + sublattices into previously unoccupied interstitial sites, which form new low-energy hopping pathways that facilitate ion transport. We rationalize the dramatic rearrangement of the cation local structure by considering the coordination preferences of the cations and the potential electrostatic penalties incurred by the higher-valent Zr 4+ cations. This work delivers an atomistic understanding of substitution-induced cation disorder and ion transport properties in a new family of earth-abundant halospinels.

Cardoza, Abby M. [Colorado School of Mines, Golden↗
DOE OSTI2021

Kinetics of Direct Olefin Synthesis from Syngas over Mixed Beds of Zn–Zr Oxides and SAPO-34

A packed bed containing a physical mixture of both Zn–Zr mixed oxide catalyst and SAPO-34 converts syngas directly into a mixture of C 2 –C 5 olefins and paraffins. Specifically, the mixed oxide catalyst is responsible for intermediate oxygenate synthesis from syngas while the molecular sieve catalyzes olefin synthesis from the oxygenate intermediates. Kinetic measurements with cofed propylene over each catalyst independently confirm olefin hydrogenation activity over both components of the composite bed. The addition of either water or CO to the feed drops the activity of propylene hydrogenation over the Zn–Zr oxide. In sum, under reaction conditions of syngas feed and produced water, olefin hydrogenation predominantly occurs over the SAPO-34 catalyst, rather than over the catalyst responsible for hydrogenating CO into oxygenate intermediates. Here, a developed kinetic model consistent with this conclusion describes measurements at differing feed compositions, temperatures, space velocities, and bed catalyst mixing ratios. Technoeconomic analysis of the process indicates that the olefin-to-paraffin ratio is a key performance metric for commercial scale syngas conversion and highlights the importance of considering olefin hydrogenation rates over the molecular sieve component.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thermodynamics of the Metal Carbonates and Bicarbonates of Mn, Co, Ni, Cu, and Zn Relevant to Mineral Energetics

The gas phase heats of formation of ground-state MCO 3 , M(HCO 3 ) 2 , and M(HCO 3 )(OH), where M = Mn, Co, Ni, Cu, and Zn, have been predicted using the correlated molecular orbital theory at the CCSD(T) level extrapolated to the complete basis set limit using the Feller–Peterson–Dixon (FPD) approach. Cohesive energies of the carbonates were predicted based on the calculated gas phase and experimental solid heats of formation. Coulombic dissociation energies (CDEs) between metal cations and anions show a near-linear correlation with Shannon metal cation atomic radii, yet no correlation is found with the hardness of these cations. The total reaction dissociation energies (TRDEs) of transition metals are higher than their CDEs for the di-bicarbonates, in contrast to those for Mg and Ca based on our prior work. In addition to differences in the energies needed to prepare the transition metal dications, electron donation from the ligands to the 3d orbitals of open-shell transition metal dications from lone pairs of adjacent O atoms also plays a role. No electron donation from the ligands to the fully occupied 3d orbitals of Zn and Cd was found. Decomposition energies for generating MO, CO 2 , and/or H 2 O were calculated. Gas phase metal exchange energies only partially correlate with the electrochemical series for M(s) → M 2+( aq). The FPD heats of formation were used to benchmark a range of density functional theory exchange–correlation functionals, including those commonly used in solid-state mineral calculations. None of the functionals provided chemical accuracy agreement (±1 kcal/mol) with the FPD results. So, the best agreement with the FPD results is predicted for the $\tau$-HCTH functional with an average unsigned error of 8.3 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

AP-XPS Study of the Reaction of O 2 and CO 2 with Zn–Au(111) Surface Alloys: Activation of O–O/C–O Bonds and the Formation of ZnO

Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the dissociation of O 2 and CO 2 on Zn-Au(111) alloys which contained 0.2-0.3 monolayers of zinc. Although Au(111) is inert, the alloys displayed a high activity for the cleavages of O-O and C-O bonds at room temperature with the formation of ZnO x species. Dissociative adsorption of O 2 at 300 K destroyed the alloys and the results of AP-XPS pointed to the co-existence of two types of oxygen species on the surface: ZnO x and chemisorbed O atoms (O chem ) on Au or the Au-ZnO interface. Annealing from room temperature to 600 K induced a O chem → ZnO x transformation that reflected the poor stability of O atoms on Au(111). The Zn-Au(111) systems exhibited a reactivity towards CO 2 that was much larger than that seen for Au(111), Cu(111) or surfaces of late transition metals like, Ni, Pd or Pt. At 300 K, CO 2 underwent partial dissociation depositing large amounts of O chem on the surface with minor formation of ZnO x . In addition, the deposited O chem reacted with CO 2 to form surface carbonate groups. Dosing of CO 2 at 500-600 K mainly led to the formation of ZnO x and the surface carbonate almost disappeared. In the presence of hydrogen, i.e. reaction feeds with a CO 2 to H 2 ratio of 1:3, the surface chemistry at 300 K was very similar to that seen for pure CO 2 with the formation of ZnO x and carbonate groups. In contrast, at 500-600 K, reaction with hydrogen induced the removal of ZnO x and CO 3 /HCOO species. Finally, our AP-XPS results are consistent with the idea that CO 2 hydrogenation on AuZn alloys involves a redox process where there is sequential oxidation by CO 2 and reduction by H 2 to yield methanol.

36 MATERIALS SCIENCE↗