Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wind shear”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Optimization and acceleration guidance of flight trajectories in a windshear

Guidance strategies for near-optimum performance in a wind shear are examined. The takeoff problem is considered with reference to flight in a vertical plane; the presence of a downdraft is assumed. Trajectories for optimum performance in a wind shear are determined for different wind shear models and intensities. Numerical experiments with the optimum control approach lead to the conclusion that, for weak to moderate shear/downdraft combinations, the optimal trajectory is characterized by a monotonic climb, and for severe shear/downdraft combinations, it is characterized by an initial climb, followed by a nearly horizontal flight, followed by renewed climbing after the aircraft has passed through the shear region. An acceleration guidance scheme based on relative acceleration is presented in both analytical form and feedback control form. Numerical results with this scheme result in trajectories close to the optimum and considerably superior to those arising from alternative guidance schemes.

Miele, A.↗

Applications of Doppler radar to aviation operations - JAWS experiences

The field phase of the Joint Airport Weather Studies (JAWS) Project was conducted in the vicinity of Denver's Stapleton International Airport from 15 May to 13 August 1982. The primary collection systems were three Doppler radars, a 27-station, closely spaced (4 km) network of surface stations, and five research aircraft. The program was specifically planned to observe wind shear phenomena with high time and space resolution that would be dangerous to aircraft operations. The program was successful in observing a large number of such events. Preliminary conclusions are presented on the effectiveness of several wind shear detection systems to warn of wind shear events critical to aviation safety.

Mccarthy, J.↗

The Quasi-biennial Oscillation and Annual Variations in Tropical Ozone from SHADOZ and HALOE

We examine the tropical ozone mixing ratio perturbation fields generated from a monthly ozone climatology using 1998 to 2006 ozonesonde data from the Southern Hemisphere Additional Ozonesondes (SHADOZ) network and the 13-year satellite record from 1993 to 2005 obtained from the Halogen Occultation Experiment (HALOE). The long time series and high vertical resolution of the ozone and temperature profiles from the SHADOZ sondes coupled with good tropical coverage north and south of the equator gives a detailed picture of the ozone structure in the lowermost stratosphere down through the tropopause where the picture obtained from HALOE measurements is blurred by coarse vertical resolution. Ozone perturbations respond to annual variations in the Brewer-Dobson Circulation (BDC) in the region just above the cold-point tropopause to around 20 km. Annual cycles in ozone and temperature are well correlated. Above 20 km, ozone and temperature perturbations are dominated by the Quasi-biennial Oscillation (QBO). Both satellite and sonde records show good agreement between positive and negative ozone mixing ratio anomalies and alternating QBO westerly and easterly wind shears from the Singapore rawinsondes with a mean periodicity of 26 months for SHADOZ and 25 months for HALOE. There is a temporal offset of one to three months with the QBO wind shear ahead of the ozone anomaly field. The meridional length scales for the annual cycle and the QBO, obtained using the temperature anomalies and wind shears in the thermal wind equation, compare well with theoretical calculations.

Witte, J. C.↗

The Global Seasonal Relationship Between Satellite-Observed Cold Pools and Rainfall

Convective cold pools are important modulators of the onset and evolution of deep convection in the tropics. This work leverages a dataset derived from the Advanced Scatterometer (ASCAT) satellite instrument by Garg et al. (2020) to quantify seasonal variations in cold pool activity and their relationship to deep convection across tropical ocean basins. The dataset identifies gradient features (GFs) in the surface wind field, which have been shown to serve as reliable proxies for the boundaries of atmospheric cold pools. We examine the relationship between GFs and climatologies of precipitation, column relative humidity (CRH), and bulk vertical wind shear. We also collocate GFs with precipitation and CRH. High GF frequency, precipitation, and CRH coincide in many regions of the tropics, consistent with our understanding of the physical connections between precipitation and cold pool generation. On the other hand, climatological bulk wind shear is often low in convective regions, and there is a weak inverse correlation between GF frequency and bulk wind shear, while our prior expectation might have been that shear promotes cold pool formation. Compared to GF frequency, GF size shows a weaker relationship with the convective environment, with some of the largest GF sizes occurring at lower CRH values for a given rainfall rate. In a few exceptional regions and seasons, such as the Indian Ocean in northern hemisphere summer, the region of greatest precipitation does not coincide with the region of greatest GF frequency. These cases also have very high seasonal mean CRH, suggesting that in these regions cold pool formation is suppressed by reduced evaporation of precipitation.

Convective cold pools↗

Simulator manufacturers' requirements

Simulator manufacturers must continue to provide the customers the latest wind shear models available for pilot training. The release of the JAWS data package enabled the provision of a much more realistic wind shear package to the customer rather than just the standard six SRI wind shear profiles currently in use. In this brief presentation, the steps taken in implementing the JAWS data into the FAA 727 simulator are highlighted.

Reilly, David R.↗

A high resolution spatial and temporal multiple Doppler analysis of a microburst and its application to aircraft flight simulation

Multiple Doppler radar data collected during the Joint Airport Weather Studies (JAWS) Project is used to synthesize the three-dimensional wind in the region of a microburst. The particular microburst used in this study is the strongest one to date for which three-dimensional winds have been recovered. As a diagnostic tool, a six-DOF numerical aircraft model having characteristics similar to 727 series aircraft is used to investigate jet transport aircraft response to observed microburst winds during simulated approaches and departures. Simple pilot control laws are used to adjust thrust, pitch, roll, and yaw so as to maintain given approach or departure parameters. Generally, when horizontal wind shear along the approach or departure path is 0.01/s or greater, the model is unable to maintain the desired approach path and suffers a significant reduction in climb performance during a go-around or departure. Although the mean wind shear along a path gives a good qualitative measure of the wind shear threat to a jet transport, different paths with similar mean shears can yield markedly different results, as do the same paths through the microburst at different times. These findings are a direct consequence of the fine temporal and spatial scale of microburst winds. During any given modeled aircraft traverse through the region of highest horizontal shear, time variations in the microburst wind field are shown to have an insignificant effect on the modeled flight path. This is because the traverse period is short (30 s) compared to the lifetime of a microburst (300-600 s).

Elmore, K. L.↗

Transformation techniques for minimax optimal control problems and their application to optimal flight trajectories in a windshear - Optimal abort landing trajectories

The optimal-control problem of abort-landing trajectories in the presence of low-altitude wind shear is investigated analytically. The vertical-plane Newtonian motion of a point-mass aircraft in a steady wind field is modeled, and a sequential gradient-restoration algorithm is applied. Numerical results showing the effects of wind-shear intensity, initial altitude, and power-setting rate are presented in extensive graphs and discussed in detail. Optimal trajectories for strong or severe wind shears are found to begin with a descent, followed by level flight and then an ascent after leaving the shear region.

Miele, A.↗

Joint Airport Weather Studies (AWS) project

The joint airport weather studies (JAWS) project is discussed. The major objectives of the JAWS Project are a fundamental description of the phenomenon, a determination of the hazard potential and a definition of a protection and warning system, all of which are relative to low level wind shear. Aspects of the low level wind shear phenomenon. The principal focus, however, is the microburst. The microburst is fundamentally a rather simple atmospheric flow. It is a downdraft that, upon approaching the surface, spreads out horizontally, producing a diverging radial flow in all directions. For any direction that an aircraft flies through the microburst, it will first encounter increasing head winds; then the remnants of the downdraft; and then, increasing tail wind.

John McCarthy↗

Alert generation and cockpit presentation for an integrated microburst alerting system

Alert generation and cockpit presentation issues for low-level wind shear (microburst) alerts are investigated. Alert generation issues center on development of a hazard criterion which allows integration of both ground-based and airborne wind shear detection systems to form an accurate picture of the aviation hazard posed by a particular wind shear situation. A methodology for testing of hazard criteria through flight simulation has been developed, and has been used to examine the effectiveness and feasibility of several possible criteria. Also, an experiment to evaluate candidate graphical cockpit displays for microburst alerts using a piloted simulator has been designed.

Wanke, Craig↗

Alert generation and cockpit presentation for an integrated microburst alerting system

Alert generation and cockpit presentation issues for low level wind shear (microburst) alerts are investigated. Alert generation issues center on the development of a hazard criterion which allows integration of both ground based and airborne wind shear detection systems to form an accurate picture of the aviation hazard posed by a particular wind shear situation. A methodology for the testing of a hazard criteria through flight simulation has been developed, and has been used to examine the effectiveness and feasibility of several possible criteria. Also, an experiment to evaluate candidate graphical cockpit displays for microburst alerts using a piloted simulator has been designed.

Wanke, Craig↗

Cockpit display of hazardous weather information

Information transfer and display issues associated with the dissemination of hazardous-weather warnings are studied in the context of wind-shear alerts. Operational and developmental wind-shear detection systems are briefly reviewed. The July 11, 1988 microburst events observed as part of the Denver TDWR operational evaluation are analyzed in terms of information transfer and the effectiveness of the microburst alerts. Information transfer, message content, and display issues associated with microburst alerts generated from ground-based sources (Doppler radars, LLWAS, and PIREPS) are evaluated by means of pilot opinion surveys and part-task simulator studies.

Hansman, R. John, Jr.↗

Microburst vertical wind estimation from horizontal wind measurements

The vertical wind or downdraft component of a microburst-generated wind shear can significantly degrade airplane performance. Doppler radar and lidar are two sensor technologies being tested to provide flight crews with early warning of the presence of hazardous wind shear. An inherent limitation of Doppler-based sensors is the inability to measure velocities perpendicular to the line of sight, which results in an underestimate of the total wind shear hazard. One solution to the line-of-sight limitation is to use a vertical wind model to estimate the vertical component from the horizontal wind measurement. The objective of this study was to assess the ability of simple vertical wind models to improve the hazard prediction capability of an airborne Doppler sensor in a realistic microburst environment. Both simulation and flight test measurements were used to test the vertical wind models. The results indicate that in the altitude region of interest (at or below 300 m), the simple vertical wind models improved the hazard estimate. The radar simulation study showed that the magnitude of the performance improvement was altitude dependent. The altitude of maximum performance improvement occurred at about 300 m.

Vicroy, Dan D.↗

Development of high resolution simulations of the atmospheric environment using the MASS model

Numerical simulations were performed with a very high resolution (7.25 km) version of the MASS model (Version 4.0) in an effort to diagnose the vertical wind shear and static stability structure during the Shuttle Challenger disaster which occurred on 28 January 1986. These meso-beta scale simulations reveal that the strongest vertical wind shears were concentrated in the 200 to 150 mb layer at 1630 GMT, i.e., at about the time of the disaster. These simulated vertical shears were the result of two primary dynamical processes. The juxtaposition of both of these processes produced a shallow (30 mb deep) region of strong vertical wind shear, and hence, low Richardson number values during the launch time period. Comparisons with the Cape Canaveral (XMR) rawinsonde indicates that the high resolution MASS 4.0 simulation more closely emulated nature than did previous simulations of the same event with the GMASS model.

Kaplan, Michael L.↗

Peak Wind Tool for General Forecasting

The expected peak wind speed of the day is an important forecast element in the 45th Weather Squadron's (45 WS) daily 24-Hour and Weekly Planning Forecasts. The forecasts are used for ground and space launch operations at the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The 45 WS also issues wind advisories for KSC/CCAFS when they expect wind gusts to meet or exceed 25 kt, 35 kt and 50 kt thresholds at any level from the surface to 300 ft. The 45 WS forecasters have indicated peak wind speeds are challenging to forecast, particularly in the cool season months of October - April. In Phase I of this task, the Applied Meteorology Unit (AMU) developed a tool to help the 45 WS forecast non-convective winds at KSC/CCAFS for the 24-hour period of 0800 to 0800 local time. The tool was delivered as a Microsoft Excel graphical user interface (GUI). The GUI displayed the forecast of peak wind speed, 5-minute average wind speed at the time of the peak wind, timing of the peak wind and probability the peak speed would meet or exceed 25 kt, 35 kt and 50 kt. For the current task (Phase II ), the 45 WS requested additional observations be used for the creation of the forecast equations by expanding the period of record (POR). Additional parameters were evaluated as predictors, including wind speeds between 500 ft and 3000 ft, static stability classification, Bulk Richardson Number, mixing depth, vertical wind shear, temperature inversion strength and depth and wind direction. Using a verification data set, the AMU compared the performance of the Phase I and II prediction methods. Just as in Phase I, the tool was delivered as a Microsoft Excel GUI. The 45 WS requested the tool also be available in the Meteorological Interactive Data Display System (MIDDS). The AMU first expanded the POR by two years by adding tower observations, surface observations and CCAFS (XMR) soundings for the cool season months of March 2007 to April 2009. The POR was expanded again by six years, from October 1996 to April 2002, by interpolating 1000-ft sounding data to 100-ft increments. The Phase II developmental data set included observations for the cool season months of October 1996 to February 2007. The AMU calculated 68 candidate predictors from the XMR soundings, to include 19 stability parameters, 48 wind speed parameters and one wind shear parameter. Each day in the data set was stratified by synoptic weather pattern, low-level wind direction, precipitation and Richardson Number, for a total of 60 stratification methods. Linear regression equations, using the 68 predictors and 60 stratification methods, were created for the tool's three forecast parameters: the highest peak wind speed of the day (PWSD), 5-minute average speed at the same time (A WSD), and timing of the PWSD. For PWSD and A WSD, 30 Phase II methods were selected for evaluation in the verification data set. For timing of the PWSD, 12 Phase\I methods were selected for evaluation. The verification data set contained observations for the cool season months of March 2007 to April 2009. The data set was used to compare the Phase I and II forecast methods to climatology, model forecast winds and wind advisories issued by the 45 WS. The model forecast winds were derived from the 0000 and 1200 UTC runs of the 12-km North American Mesoscale (MesoNAM) model. The forecast methods that performed the best in the verification data set were selected for the Phase II version of the tool. For PWSD and A WSD, linear regression equations based on MesoNAM forecasts performed significantly better than the Phase I and II methods. For timing of the PWSD, none of the methods performed significantly bener than climatology. The AMU then developed the Microsoft Excel and MIDDS GUls. The GUIs display the forecasts for PWSD, AWSD and the probability the PWSD will meet or exceed 25 kt, 35 kt and 50 kt. Since none of the prediction methods for timing of the PWSD performed significantly better thanlimatology, the tool no longer displays this predictand. The Excel and MIDDS GUIs display forecasts for Day-I to Day-3 and Day-I to Day-5, respectively. The Excel GUI uses MesoNAM forecasts as input, while the MIDDS GUI uses input from the MesoNAM and Global Forecast System model. Based on feedback from the 45 WS, the AMU added the daily average wind speed from 30 ft to 60 ft to the tool, which is one of the parameters in the 24-Hour and Weekly Planning Forecasts issued by the 45 WS. In addition, the AMU expanded the MIDDS GUI to include forecasts out to Day-7.

Barrett, Joe H., III↗

Low-level flow conditions hazardous to aircraft

Low level flow conditions known to be hazardous to aircraft during takeoff/climbout and approach/landing operations are turbulence, wind shear, and vertical motion. These conditions can and frequently do occur separately and in combinations. The identification and selection were completed of representative data cases to determine magnitude, frequency, duration, and simultaneity of occurrence of turbulence (gustiness and gust factor), wind shear (speed and direction), and vertical motion (updraft and downdraft), along with temperature inversions. New representations of temporal and spatial variations in the atmospheric boundary layer were developed. Efforts continued relative to low level flow conditions where published results imply strong vertical shear with virtually no horizontal shear and where order of magnitude analyses of the equations of motion for an aircraft illustrates that low values of horizontal shear (along the flight path) are much more hazardous than larger values of vertical wind shear (altitude).

Alexander, M. B.↗

Turbulence models

The subject of modeling turbulence for use with the JAWS wind shear data sets is addressed. The present FAA AC 120-41 wind shear models are quasisteady wind models. FAA recommends superimposing upon these winds a Dryden spectrum model of turbulence. For the JAWS data, it must be decided whether this approach is adequate or whether turbulence must be analyzed and modeled differently. This question is discussed in detail.

Frost, Walter↗

Internal gravity wave-atmospheric wind interaction - A cause of clear air turbulence.

The interaction between an internal gravity wave (IGW) and a vertical wind shear is discussed as a possible cause in the production of clear air turbulence in the free atmosphere. It is shown that under certain typical condition the interaction of an IGW with a background wind shear near a critical level provides a mechanism for depositing sufficient momentum in certain regions of the atmosphere to significantly increase the local mean wind shear and to lead to the production of turbulence.

Bekofske, K.↗

A further study of cumulus interactions and mergers - Three-dimensional simulations with trajectory analysis

Cumulus processes involved in the interaction and merging of clouds under the influence of different imposed conditions (including large-scale lifting forcing, environmental wind shear, and cloud microphysical processes) were studied using simulations with a three-dimensional model. The design of the study was to generate several convective clouds randomly inside the model domain, and then to observe and analyze the interactions and merging between the simulated clouds. Ten merged clouds were identified. Seven of these, each involving two previously separated clouds, generally lie along a line parallel to the initial environmental wind shear vector, while one (also a two-cloud system) lies along a line perpendicular to the wind shear vector prior to merging. The remaining two merging systems involve three parent clouds each; they are a combination of parallel and perpendicular cells. The merging mechanisms associated with three-cloud merging cases are studied by examining the temperature, pressure, and wind fields prior to, during, and following the merging.

Tao, Wei-Kuo↗