Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIRING SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Liquid argon TPC signal formation, signal processing and reconstruction techniques

This document describes a reconstruction chain that was developed for the ArgoNeuT and MicroBooNE experiments at Fermilab. These experiments study accelerator neutrino interactions that occur in a Liquid Argon Time Projection Chamber. Reconstructing the properties of particles produced in these interactions benefits from the knowledge of the micro-physics processes that affect the creation and transport of ionization electrons to the readout system. A wire signal deconvolution technique was developed to convert wire signals to a standard form for hit reconstruction, to remove artifacts in the electronics chain and to remove coherent noise. A unique clustering algorithm reconstructs line-like trajectories and vertices in two dimensions which are then matched to create of 3D objects. In conclusion, these techniques and algorithms are available to all experiments that use the LArSoft suite of software.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synchrotron radiation based beam diagnostics at the Fermilab Tevatron

Synchrotron radiation has been used for many years as a beam diagnostic at electron accelerators. It is not normally associated with proton accelerators as the intensity of the radiation is too weak to make detection practical. Therefore, if one utilizes the radiation originating near the edge of a bending magnet, or from a short magnet, the rapidly changing magnetic field serves to enhance the wavelengths shorter than the cutoff wavelength, which for more recent high energy proton accelerators such as Fermilab's Tevatron, tends to be visible light. This paper discusses the implementation at the Tevatron of two devices. A transverse beam profile monitor images the synchrotron radiation coming from the proton and antiproton beams separately and provides profile data for each bunch. A second monitor measures the low-level intensity of beam in the abort gaps which poses a danger to both the accelerator's superconducting magnets and the silicon detectors of the high energy physics experiments. Comparisons of measurements from the profile monitor to measurements from the flying wire profile systems are presented as are a number of examples of the application of the profile and abort gap intensity measurements to the modelling of Tevatron beam dynamics.

43 PARTICLE ACCELERATORS↗

Coupling Two Laser-Cooled Ions via a Room-Temperature Conductor

We demonstrate coupling between the motions of two independently trapped ions with a separation distance of 620 μm. Here, the ion-ion interaction is enhanced via a room-temperature electrically floating metallic wire which connects two surface traps. Tuning the motion of both ions into resonance, we show flow of energy with a coupling rate of 11 Hz. Quantum-coherent coupling is hindered by strong surface electric-field noise in our device. Our ion-wire-ion system demonstrates that room-temperature conductors can be used to mediate and tune interactions between independently trapped charges over distances beyond those achievable with free-space dipole-dipole coupling. This technology may be used to sympathetically cool or entangle remotely trapped charges and enable coupling between disparate physical systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of an Encoding Method on an Co-simulation Platform for Mitigating the Impact of Unreliable Communication

This report presents a hardware-in-the-loop (HIL) based modeling approach for simulating impacts of unreliable communication on the performance of centralized volt-var control and for developing an encoding method to mitigate the impacts. First, an asynchronous real-time HIL simulation platform is introduced to enable multi-rate co-simulation of a distribution system with many inverter-based distributed energy resources (DERs). The distribution system is modeled by milliseconds phasor-based models and the DERs are modeled by micro-seconds power electronic models. Communication connections between a centralized volt-var controller (modeled externally to the HIL testbed) and smart inverters are built by implementing Modbus links and the Long Term Evolution network. On this co-simulation platform, an enhanced, augmented Lagrangian multiplier based encoded data recovery (EALM-EDR) algorithm for mitigating the impact of unreliable communication is developed and validated. Simulation results demonstrate the efficacy of using the HIL-based co-simulation platform as a power grid digital twin for developing algorithms that coordinate a large number of heterogeneous control systems through wired and wireless communication links.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Charging of Macroparticles in a Corona Discharge in an Air Flow

The charging of Al{sub 2}O{sub 3} macroparticles with dimensions ranging from 20 to 40 μm in a gas flow passing through a multielectrode corona discharge is investigated. The corona discharge is produced by a system of wire electrodes arranged across the gas flow. The particle charge and mass are measured using a linear electrodynamic trap. For a corona voltage of 18 kV, the average charge-to-mass ratio is found to be 1.69 × 10{sup 13}e/g for particles charged in the positive corona and 1.35 × 10{sup 13}e/g for particles charged in the negative corona.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoelectrochemical Etching of GaN Quantum Wires

For this Exploratory Express LDRD we investigated the use photoelectrochemical etching to demonstrate GaN quantum wires with a diameter of less than 10 nm. Although GaN nanowires with much larger sizes (200 nm – 2 microns) have been demonstrated by a number of techniques, quantum wires are much more difficult to realize due to the very small dimensions (< 10 nm). Previous demonstrations of semiconductor quantum wires have relied on colloidal methods resulting in large size distributions or complicated regrowth on the edge of a cleaved wafer. Here we propose to use photoelectrochemical etching to realize GaN quantum wires. Previously we have been able to show that this technique can be used to make InGaN quantum dots and we propose to use similar methods to realize GaN quantum wires. To our knowledge, GaN quantum wires have never been demonstrated due to growth and fabrication difficulties. Photoelectrochemical etching has also never been used to demonstrate quantum wires in any material system. If our quantum wire fabrication method is successful, it will open up a new research area centered around GaN quantum wires and related applications. Quantum wires can be used as an efficient nanoscale conduit for the transport of charge and energy and will find applications in nanoelectronics, energy harvesting (solar), nanoscale light emitters, and chem/bio sensors.

42 ENGINEERING↗

Recirculation patterns in the initial region of coaxial jets.

This experimental study is concerned with the mixing in the initial region of turbulent coaxial streams. The investigation is limited to the low-speed incompressible case with the inner stream of lower velocity than the outer stream. Velocity ratios ranged from infinity to one. The inner to outer stream density ratio was either 4 or 1. Experimental measurements were made with a hot-wire anemometer system, static pressure probes, and shadowgraphy. The data show that a backflow region is formed in this particular apparatus at outer to inner stream velocity ratio of 13 for the homogeneous case and at outer to inner stream velocity ratio of 26 for the heterogeneous case. For higher velocity ratio, a circulating toroidal vortex is established which enhances mixing between the inner and outer streams. This vortex pattern exhibits similarity of velocity with velocity ratio variations.

Rozenman, T.↗

Hot-wire anemometry for in-flight measurement of aircraft wake vortices

An airborne hot-wire anemometry system capable of providing data concerning the vortex structure in the wake of a preceding aircraft has been used in several flight studies. The design features of this technique and the operational experience with it are described. This development program has resulted in a flight-test technique that can make accurate velocity measurements in flow regimes where large velocity gradients occur.

Jacobsen, R. A.↗

Challenge to Aviation: Hatching a Leaner Pterosauer

Modifications in commercial aircraft design, particularly the development of lighter aircraft, are discussed as effective means of reducing aviation fuel consumption. The modifications outlined include: (1) use of the supercritical wing; (2) generation of the winglet; (3) production and flight testing of composite materials; and, (4) implementation of fly-by-wire control systems. Attention is also given to engineering laminar air flow control, improving cargo payloads, and adapting hydrogen fuels for aircraft use.

Moss, F. E.↗

NASA's role in aeronautics

NASA civil aviation research efforts in regard to noise reduction, development of very quiet engines, fuel conservation, and aircraft efficiency and safety are outlined. Specific projects discussed include the supercritical wing program, the fly-by-wire control system, the modified JT8D jet engine, the two-segment noise abatement landing procedure, the general aviation safety program, the GAW-1 low speed airfoil, the Army/NASA tilt rotor flight research project, and the remotely piloted research vehicle program.

Jones, J. L.↗

Digital adaptive flight control design using single stage model following indices

Simple mechanical linkages are often unable to cope with many control problems associated with high-performance aircraft. This has led to the development of digital fly-by-wire control systems and in particular digital adaptive controllers that can be efficiently adjusted during system operation. To this effect, a control law has been derived based upon the minimization of a single-stage weighted combination of control energy and the squared error between the states of a linear plant and model. This control logic is interfaced with an on-line weighted least-squares estimator and a Kalman state filter. The utility of the resultant control system is illustrated by its application to the linearized dynamics of a typical fighter aircraft.

Alag, G.↗

LTA application of a long trailing wire high speed/low weight reeling system

The successful development of a unique yet simple reeling system for handling long trailing tensile members at high speeds is described. This high speed when combined with the system simplicity, low weight and effective motive power consumption make this reeling system particularly attractive to LTA planners and designers for numerous LTA missions.

Werb, D. F.↗

An experimental study of a self-confined flow with ring-vorticity distribution

A new form of self-confined flow was investigated in which a recirculation zone forms away from any solid boundary. An inviscid flow analysis indicated that in a purely meridional axisymmetric flow a stationary, spherical, self-confined region should occur in the center of a streamlined divergent-convergent enlargement zone. The spherical confinement region would be at rest and at constant pressure. Experimental investigations were carried out in a specially built test apparatus to establish the desired confined flow. The streamlined divergent-convergent interior shape of the test section was fabricated according to the theoretical calculation for a particular streamline. The required inlet vorticity distribution was generated by producing a velocity profile with a shaped gauze screen in the straight pipe upstream of the test section. Fluid speed and turbulence intensity were measured with a constant-temperature hot-wire anemometer system. The measured results indicated a very orderly and stable flow field.

Lin, K. M.↗