Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Voltammetry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Understanding the Stability of Manganese Chromium Antimonate Electrocatalysts through Multimodal In Situ and Operando Measurements

Herein, we utilize an on-line electrochemical flow cell coupled with an inductively coupled plasma-mass spectrometer (ICP-MS) to characterize the impact of composition and reactant gas on the multielement dissolution of Mn(-Cr)-Sb-O electrocatalysts. Compared to Mn 2 O 3 and Cr 2 O 3 oxides, we find that the antimonate framework stabilizes Mn at OER potentials and Cr at both ORR and OER potentials. Furthermore, dissolution of Mn and Cr from Mn(-Cr)-Sb-O is found to be driven by ORR reaction rate, with minimal dissolution under N 2 . We observe preferential dissolution of Cr totaling 13% over 10 minutes at 0.3, 0.6, and 0.9 V vs RHE, with only 1.5% loss of Mn, indicating an enrichment of Mn at the surface of the particles. Despite this asymmetric dissolution, in situ X-ray absorption spectroscopy (XAS) showed no measurable changes in the Mn K-edge at comparable potentials. This lack of change could suggest that modification to the Mn oxidation state in the surface layer is too small or that layer is too thin to be measured with the bulk XAS measurement. Lastly, on-line ICP-MS was used to assess the effects of applied potential, scan rate, and current of Mn-Cr-Sb-O during cyclic voltammetry and accelerated stress tests. With this deeper understanding of the interplay between oxygen reduction and dissolution, testing procedures were identified to maximize both activity and stability. This work highlights the use of multi-modal in situ characterization techniques in tandem to build a more complete model of stability and develop protocols for optimizing catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Platinum Surface Water Orientation Dictates Hydrogen Evolution Reaction Kinetics in Alkaline Media

The fundamental understanding of sluggish hydrogen evolution reaction (HER) kinetics on a platinum (Pt) surface in alkaline media is a topic of considerable debate. Herein, we combine cyclic voltammetry (CV) and electrical transport spectroscopy (ETS) approaches to probe the Pt surface at different pH values and develop molecular-level insights into the pH-dependent HER kinetics in alkaline media. The change in HER Tafel slope from ~110 mV/decade in pH 7–10 to ~53 mV/decade in pH 11–13 suggests considerably enhanced kinetics at higher pH. The ETS studies reveal a similar pH-dependent switch in the ETS conductance signal at around pH 10, suggesting a notable change of surface adsorbates. Fixed-potential calculations and chemical bonding analysis suggest that this switch is attributed to a change in interfacial water orientation, shifting from primarily an O-down configuration below pH 10 to a H-down configuration above pH 10. This reorientation weakens the O–H bond in the interfacial water molecules and modifies the reaction pathway, leading to considerably accelerated HER kinetics at higher pH. Finally, our integrated studies provide an unprecedented molecular-level understanding of the nontrivial pH-dependent HER kinetics in alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synergistic Effects of the Electric Field Induced by Imidazolium Rotation and Hydrogen Bonding in Electrocatalysis of CO 2

The roles of the ionic liquid, 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF₄]), and water in controlling the mechanism, energetics, and electrocatalytic activity of CO₂ reduction to CO on silver in non-aqueous electrolytes were investigated. The first electron transfer occurs to CO₂ at reduced overpotentials when it is trapped between the planes of [EMIM]⁺ ring and electrode surface due to cation re-orientation as determined from voltammetry, in-situ surface-enhanced Raman spectroscopy, and density functional theory calculations. Within this interface, water up to 0.5 M does not induce significant faradaic activity, opposing the notion of it as a free proton source. Instead, water acts as a hydrogen bond donor and the proton is sourced from [EMIM]⁺. Furthermore, this study demonstrates that alcohols with varying acidity tune the hydrogen bonding network in the interfacial microenvironment to lower the energetics required for CO₂ reduction. Here, the hydrogen bonding suppresses the formation of inactive carboxylate species, thus preserving the catalytic activity of [EMIM]⁺. The ability to tune the hydrogen bonding network opens new avenues for advancing IL-mediated electrocatalytic reactions in non-aqueous electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mixed Valence {Ni 2+ Ni 1+ } Clusters as Models of Acetyl Coenzyme A Synthase Intermediates

Acetyl coenzyme A synthase (ACS) catalyzes the formation and deconstruction of the key biological metabolite, acetyl coenzyme A (acetyl-CoA). The active site of ACS features a {NiNi} cluster bridged to a [Fe4S4] n+ cubane known as the A-cluster. The mechanism by which the A-cluster functions is debated, with few model complexes able to replicate the oxidation states, coordination features, or reactivity proposed in the catalytic cycle. In this work, we isolate the first bimetallic models of two hypothesized intermediates on the paramagnetic pathway of the ACS function. The heteroligated {Ni 2+ Ni 1+ } cluster, [K(12-crown-4) 2 ][1], effectively replicates the coordination number and oxidation state of the proposed “A red ” state of the A-cluster. Addition of carbon monoxide to [1] - allows for isolation of a dinuclear {Ni 2+ Ni 1+ (CO)} complex, [K(12-crown-2) n ][2] (n = 1–2), which bears similarity to the “A NiFeC ” enzyme intermediate. Structural and electronic properties of each cluster are elucidated by X-ray diffraction, nuclear magnetic resonance, cyclic voltammetry, and UV/vis and electron paramagnetic resonance spectroscopies, which are supplemented by density functional theory (DFT) calculations. Calculations indicate that the pseudo-T-shaped geometry of the three-coordinate nickel in [1] – is more stable than the Y-conformation by 22 kcal mol –1 , and that binding of CO to Ni 1+ is barrierless and exergonic by 6 kcal mol –1 . UV/vis absorption spectroscopy on [2] - in conjunction with time-dependent DFT calculations indicates that the square-planar nickel site is involved in electron transfer to the CO π*-orbital. Further, we demonstrate that [2] - promotes thioester synthesis in a reaction analogous to the production of acetyl coenzyme A by ACS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Isolation of Inner-Sphere Aquo Complexes of Samarium(II)

The cis-anti-cis and cis-syn-cis isomers of [Sm(dicyclohexano-18-crown-6)(H 2 O) 2 ]I 2 exhibiting trans water molecules bound to the Sm 2+ ion have been isolated and characterized. Sm 2+ possesses an electrochemical potential sufficient for water reduction, and thus these complexes add to the recent body of evidence that the oxidation of Sm 2+ by water can operate by a mechanism that is not straightforward. These complexes are obtained by the direct addition of stoichiometric amounts of water to solutions of the respective Sm(dicyclohexano-18-crown-6)I 2 isomers under an inert atmosphere. The parent complex, Sm(dicyclohexano-18-crown-6)I 2 , lacking coordinating water molecules can be obtained through rigorous exclusion of water. It was determined that the bulky cyclohexano-substituents deter intramolecular interactions between [Sm(dicyclohexano-18-crown-6)(H 2 O) 2 ]I 2 complexes and slow the oxidization of the metal centers. The extent of the stability of these complexes to the presence of water has been further probed through cyclic voltammetry, where it was found that the redox potential of both isomers of [Sm(dicyclohexano-18-crown-6)(H 2 O) 2 ]I 2 maintains quasi-reversible behavior with a 50,000-fold excess of water to Sm 2+ in solution with the cis-syn-cis complex being quasi-reversible at even higher concentrations of water. Solution-phase spectroscopy of these complexes in acetonitrile shows a corresponding hypsochromic shift of the Sm 2+ 4f → 5d transition typically observed in the visible region from Sm 2+ complexes. Here, the crystalline compounds obtained in this study support solid-state spectroscopic trends observed from other Sm 2+ crown-ether complexes containing iodide counterions, wherein the proximity of the iodide ions to the metal center determines whether the complex can exhibit 4f → 4f photoluminescence.

Crystals↗
DOE OSTI2025

The Role of Cu 3+ in the Oxygen Evolution Activity of Copper Oxides

Cu-based oxides and hydroxides represent an important class of materials from a catalytic and corrosion perspective. In this study, we investigate the formation of bulk and surface Cu 3+ species that are stable under water oxidation catalysis in alkaline media. So far, no direct evidence existed for the presence of hydroxides (CuOOH) or oxides, which were primarily proposed by theory. Here, this work directly places CuOOH in the oxygen evolution reaction (OER) Pourbaix stability region with a calculated free energy of −208.68 kJ/mol, necessitating a revision of known Cu–H 2 O phase diagrams. We also predict that the active sites of CuOOH for the OER are consistent with a bridge O* site between the two Cu 3+ atoms with onset at ≥1.6 V vs the reversible hydrogen electrode (RHE), aligning with experimentally observed Cu 2+/3+ oxidation waves in cyclic voltammetry of Fe-free and Fe-spiked copper in alkaline media. Trace amounts of Fe (2 μg/mL (ppm) to 5 μg/mL) in the solution measurably enhance the catalytic activity of the OER, likely due to the adsorption of Fe species that serve as the active sites . Importantly, modulation excitation X-ray absorption spectroscopy (ME-XAS) of a Cu thin-film electrode shows a distinct Cu 3+ fingerprint under OER conditions at 1.8 V vs RHE. Additionally, in situ Raman spectroscopy of polycrystalline Cu in 0.1 mol/L (M) KOH revealed features consistent with those calculated for CuOOH in addition to CuO. Overall, this work provides direct evidence of bulk electrochemical Cu 3+ species under OER conditions and expands our longstanding understanding of the oxidation mechanism and catalytic activity of copper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A [FeFe] Hydrogenase–Rubrerythrin Chimeric Enzyme Functions to Couple H 2 Oxidation to Reduction of H 2 O 2 in the Foodborne Pathogen Clostridium perfringens

[FeFe] hydrogenases are a diverse class of H 2 -activating enzymes with a wide range of utilities in nature. As H 2 is a promising renewable energy carrier, exploration of the increasingly realized functional diversity of [FeFe] hydrogenases is instrumental for understanding how these remarkable enzymes can benefit society and inspire new technologies. In this work, we uncover the properties of a highly unusual natural chimera composed of a [FeFe] hydrogenase and rubrerythrin as a single polypeptide. The unique combination of [FeFe] hydrogenase with rubrerythrin, an enzyme that functions in H 2 O 2 detoxification, raises the question of whether catalytic reactions, such as H 2 oxidation and H 2 O 2 reduction, are functionally linked. Herein, we express and purify a representative chimera from Clostridium perfringens (termed Cper HydR) and apply various electrochemical and spectroscopic approaches to determine its activity and confirm the presence of each of the proposed metallocofactors. The cumulative data demonstrate that the enzyme contains a surprising array of metallocofactors: the catalytic site of [FeFe] hydrogenase termed the H-cluster, two [4Fe-4S] clusters, two rubredoxin Fe(Cys) 4 centers, and a hemerythrin-like diiron site. The absence of an H 2 -evolution current in protein film voltammetry highlights an exceptional bias of this enzyme toward H 2 oxidation to the greatest extent that has been observed for a [FeFe] hydrogenase. Here, we demonstrate that Cper HydR uses H 2 , catalytically split by the hydrogenase domain, to reduce H 2 O 2 by the diiron site. Structural modeling suggests a homodimeric nature of the protein. Overall, this study demonstrates that Cper HydR is an H 2 -dependent H 2 O 2 reductase. Equipped with this information, we discuss the possible role of this enzyme as a part of the oxygen-stress response system, proposing that Cper HydR constitutes a new pathway for H 2 O 2 mitigation.

08 HYDROGEN↗
DOE OSTI2026

High-Energy Hybridized States Enable Long-Lived Hot Electrons in Cobaloxime-Silicon Nanocrystal System

Strong electronic coupling is achieved between the molecular catalyst cobaloxime ([Co]) and silicon nanocrystals (Si NCs) bridged by an ethylenepyridine group derived from vinylpyridine (vpy) covalently bound to the Si NC surface (Si-vpy-[Co]). The ethylenepyridine tether in Si-vpy-[Co] is key to dramatic changes to the system’s physical properties which are not observed in the corresponding formylpyridine (fpy) system (Si-fpy-[Co]) consistent with strong electronic coupling previously observed only in dark electrochemical systems. UV−vis absorption spectroscopy reveals new [Co]-centered electronic states in Si-vpy-[Co], and transient absorption spectroscopy finds a strong absorption feature appearing within 250 fs and persisting for at least 5 ns. Astoundingly, spectroelectrochemical measurements reveal that this absorption feature is consistent with both the singly reduced [Co] − and doubly reduced [Co] 2− complexes, leading to the conclusion that these long-lived charges are derived from high-energy “hot” electrons residing in [Co]-centered states. Detailed analysis using cyclic voltammetry, spectroelectrochemistry, electron paramagnetic resonance spectroscopy, and density functional theory (DFT) calculations provides insight into the unique electronic structure created in Si-vpy-[Co]. DFT reveals that the new electronic states arise from hybridization between deep Si NC band states and high-energy molecular orbitals of the ethylenepyridine tether and the [Co] catalyst and are facilitated by σ-bonding character at the ethylenepyridine linkage. This study demonstrates that strong electronic coupling achieved through precise molecular chemistry can change the paradigm of otherwise fixed energy levels in hybrid photoelectrochemical systems for artificial photosynthesis and related applications.

14 SOLAR ENERGY↗
DOE OSTI2026

Hot-Carrier Injection and Millisecond Charge Separation from a Robust Heteroleptic Iron(II) Chromophore Immobilized on TiO 2

The synthesis, spectroscopic characterization, computational analysis, and photoelectrochemical behavior of a new iron-based chromophore, [(Cpy) 2 Fe- (deeb)](PF 6 ) 2 (Fe(Cpy) 2 (deeb)), where Cpy is 1-methyl-3-(2-pyridyl)imidazole and deeb is 4,4’-(CO 2 CH 2 CH 3 ) 2 -2,2’-bipyridine, is reported. Electrochemically reversible waves assigned to a metal-centered E o (Fe III/II ) = +0.48 and a ligand-centered E o (Fe 2+/+ ) = −1.47 V vs Fc +/0 reduction were evident in cyclic voltammetry measurements. The combination of a strong σ-donor and a π-acceptor lowered the energy of the metal-toligand charge-transfer (MLCT) excited state relative to the metal-centered state. Two MLCT transitions appear in the visible region at 424 and 580 nm. TDDFT calculations revealed that the lower-energy band was well formulated as Fe(II)→deeb, and the higher-energy transition was charge transfer to both the deeb and Cpy ligands. Resonance Raman spectroscopy supports these findings showing enhanced deeb vibrational modes with 532 nm excitation, both deeb and Cpy modes with 473 nm excitation, and exclusively Cpy with 405 nm excitation. Ultrafast spectroscopy reveals a short-lived (∼2 ps) MLCT excited state and a longer-lived (∼20 ps) metal-centered state. Efficient methods to deprotect the ester groups and anchor the complex to mesoporous TiO 2 (anatase) thin films in high surface coverages, Fe(Cpy) 2 (dcb)|TiO 2 σ = 3 × 10 −8 mol/cm 2 , were established. Pulsed light excitation of Fe(Cpy) 2 (dcb)|TiO 2 resulted in rapid excited state injection (k inj > 10 8 s −1 ) and formation of a charge-separated state, Fe III (Cpy) 2 (dcb)|TiO 2 (e), which persists on the millisecond time scale before returning cleanly to the ground state with secondorder kinetics. Injection yields measured 50 ns after light excitation were found to double from Φ = 0.15 with green (532 nm) light to 0.30 with blue (457 nm) light excitation. Incident photon-to-current efficiency (% IPCE) measurements as a function of excitation wavelength in a 0.5 M LiI/I 2 /CH 3 CN electrolyte provide clear evidence for band-selective “hot carrier” injection from the remote Cpy-localized excited state. Collectively, the spectroscopic and photoelectrochemical data indicate that a semiconductor can intercept hot electrons from iron chromophores even when the excited-state dipole is oriented away from the surface-anchoring ligand.

Charge transfer↗
DOE OSTI2026

Interfacial Charge Transfer Pathways in Photoelectrochemical H 2 Evolution by a Single-Component Molecular Catalyst on a Conductive Metal Oxide

Dye-sensitized photoelectrosynthesis cells traditionally combine a photosensitizing dye to harvest light and a catalyst to generate chemical fuels on a semiconductor. Here, in this work, a photoactive catalyst capable of both light absorption and fuel formation, [Cp*Ir(4,4′-Y 2 -bpy)Cl][Cl] (Cp* = pentamethylcyclopentadienyl, bpy = 2,2′-bipyridine, Y = CH 2 PO 3 H 2 ), is anchored to a mesoporous tin-doped indium oxide (ITO) electrode and facilitates photoelectrochemical H 2 evolution in water without the need for additional photosensitizers or sacrificial reductants. Spectroelectrochemistry indicates a single-site H 2 evolution mechanism involving charge injection to ITO, in contrast to the bimetallic mechanism observed in solution. Cyclic voltammetry and variable-potential chronoamperometry under illumination probe competing pathways via interfacial electron transfer between the Ir hydride excited state and the conductive ITO electrode. A Marcus theory framework provides reorganization energies for competing interfacial electron transfer pathways from potential-dependent quantum yield measurements. The light-driven H 2 evolution catalysis on conducting oxide proceeds with high Faradaic efficiency and current densities comparable to photoelectrodes utilizing p-type semiconductors. By uncovering the principal electron transfer pathways that govern photocatalytic efficiency, this study establishes design principles for hybrid molecular photoelectrocatalysts.

catalysts↗
DOE OSTI2026

A Ce 4+ Aluminum Hydride Complex

Complexes of reducing hydride ligands by high-oxidation state cerium are unknown due to the fundamental mismatch in their redox chemistry. Herein we report the synthesis, characterization, and reactivity of the first example of a Ce 4+ aluminum hydride complex. Synthetic strategies adapted from the preparation of Ce 4+ alkyl complexes facilitated the isolation of [Ce 4+ (κ 2 -H 3 AlC(TMS) 3 )(NP( t Bu) 3 ) 3 ] (CeHAl). The bonding and structure of this complex is characterized by single-crystal XRD, NMR, and UV–vis–NIR spectroscopy, and DFT computations. The fundamental reactivity profile is evaluated by cyclic voltammetry and small-molecule reactions.

anions↗
DOE OSTI2021

Tuning the electronic structure of Ag-Pd alloys to enhance performance for alkaline oxygen reduction

Alloying is a powerful tool that can improve the electrocatalytic performance and viability of diverse electrochemical renewable energy technologies. Herein, we enhance the activity of Pd-based electrocatalysts via Ag-Pd alloying while simultaneously lowering precious metal content in a broad-range compositional study focusing on highly comparable Ag-Pd thin films synthesized systematically via electron-beam physical vapor co-deposition. Cyclic voltammetry in 0.1 M KOH shows enhancements across a wide range of alloys; even slight alloying with Ag (e.g. Ag 0.1 Pd 0.9 ) leads to intrinsic activity enhancements up to 5-fold at 0.9 V vs. RHE compared to pure Pd. Based on density functional theory and x-ray absorption, we hypothesize that these enhancements arise mainly from ligand effects that optimize adsorbate–metal binding energies with enhanced Ag-Pd hybridization. This work shows the versatility of coupled experimental-theoretical methods in designing materials with specific and tunable properties and aids the development of highly active electrocatalysts with decreased precious-metal content.

25 ENERGY STORAGE↗
DOE OSTI2022

Production of fast-charge Zn-based aqueous batteries via interfacial adsorption of ion-oligomer complexes

Abstract Aqueous zinc batteries are attracting interest because of their potential for cost-effective and safe electricity storage. However, metallic zinc exhibits only moderate reversibility in aqueous electrolytes. To circumvent this issue, we study aqueous Zn batteries able to form nanometric interphases at the Zn metal/liquid electrolyte interface, composed of an ion-oligomer complex. In Zn||Zn symmetric cell studies, we report highly reversible cycling at high current densities and capacities (e.g., 160 mA cm −2 ; 2.6 mAh cm −2 ). By means of quartz-crystal microbalance, nuclear magnetic resonance, and voltammetry measurements we show that the interphase film exists in a dynamic equilibrium with oligomers dissolved in the electrolyte. The interphase strategy is applied to aqueous Zn||I 2 and Zn||MnO 2 cells that are charged/discharged for 12,000 cycles and 1000 cycles, respectively, at a current density of 160 mA cm −2 and capacity of approximately 0.85 mAh cm −2 . Finally, we demonstrate that Zn||I 2 -carbon pouch cells (9 cm 2 area) cycle stably and deliver a specific energy of 151 Wh/kg (based on the total mass of active materials in the electrode) at a charge current density of 56 mA cm −2 .

25 ENERGY STORAGE↗
DOE OSTI2023

Heterogenous electromediated depolymerization of highly crystalline polyoxymethylene

Abstract Post-consumer plastic waste in the environment has driven the scientific community to develop deconstruction methods that yield valued substances from these synthetic macromolecules. Electrocatalysis is a well-established method for achieving challenging transformations in small molecule synthesis. Here we present the first electro-chemical depolymerization of polyoxymethylene—a highly crystalline engineering thermoplastic (Delrin®)—into its repolymerizable monomer, formaldehyde/1,3,5-trioxane, under ambient conditions. We investigate this electrochemical deconstruction by employing solvent screening, cyclic voltammetry, divided cell studies, electrolysis with redox mediators, small molecule model studies, and control experiments. Our findings determine that the reaction proceeds via a heterogeneous electro-mediated acid depolymerization mechanism. The bifunctional role of the co-solvent 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) is also revealed. This study demonstrates the potential of electromediated depolymerization serving as an important role in sustainable chemistry by merging the concepts of renewable energy and circular plastic economy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Alkali cation-induced cathodic corrosion in Cu electrocatalysts

The reconstruction of Cu catalysts during electrochemical reduction of CO 2 is a widely known but poorly understood phenomenon. Herein, we examine the structural evolution of Cu nanocubes under CO 2 reduction reaction and its relevant reaction conditions using identical location transmission electron microscopy, cyclic voltammetry, in situ X-ray absorption fine structure spectroscopy and ab initio molecular dynamics simulation. Our results suggest that Cu catalysts reconstruct via a hitherto unexplored yet critical pathway - alkali cation-induced cathodic corrosion, when the electrode potential is more negative than an onset value (e.g., –0.4 V RHE when using 0.1 M KHCO 3 ). Having alkali cations in the electrolyte is critical for such a process. Consequently, Cu catalysts will inevitably undergo surface reconstructions during a typical process of CO 2 reduction reaction, resulting in dynamic catalyst morphologies. While having these reconstructions does not necessarily preclude stable electrocatalytic reactions, they will indeed prohibit long-term selectivity and activity enhancement by controlling the morphology of Cu pre-catalysts. Alternatively, by operating Cu catalysts at less negative potentials in the CO electrochemical reduction, we show that Cu nanocubes can provide a much more stable selectivity advantage over spherical Cu nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrochemically in situ formed rocksalt phase in titanium dioxide determines pseudocapacitive sodium-ion storage

Earth-abundant TiO 2 is a promising negative electrode for low-cost sodium-ion batteries (SIBs) owing to its high capacity, rapid (dis)charging capability, safe operation potential and nonflammability. Crystalline anatase TiO 2 is not suitable for reversible Na + (de)intercalation, but it displays pseudocapacitive response after repeated cycles. Herein, we find and demonstrate that ordered rocksalt (RS) NaTiO 2 nanograins are in situ formed by electrochemically cycling with Na + ions in anatase and amorphous TiO 2 . The in situ formed RS-NaTiO 2 follows a solid-solution reaction with small volume changes of only 2.0%, that determines the pseudocapacitive “mirror-like” cyclic voltammetry curve with a couple of broad redox peaks at 0.75 V vs. Na + /Na, a high capacity of 253 mAh g −1 , high-rate capability and thousands of stable cycles. The multistep crystalline-to-amorphous-to-RS transformations are able to be electrochemically activated during the aging process of assembled full cells. Our finding provides a direction for developing unconventional Ti-based high-performance active materials for SIBs with both high energy and power densities.

Tang, Dafu [Xiamen University (China); Innovation ↗
DOE OSTI2022

Insights on the corrosion thermodynamics of chromium in molten LiF-NaF-KF eutectic salts

The thermodynamic stability of chromium in the Cr 0 , Cr 2+ , and Cr 3+ oxidation states considering various F - ion coordination compounds was investigated in molten LiF–NaF-KF (FLiNaK) eutectic salt. Potential fluoride ion activity (F - and CrF 3 - ) diagrams were constructed to predict the most stable Cr oxidation states as a function of anion activity, solvation state of chromium ions and potential at 600 °C. The Gibbs free energies of these compounds were estimated by utilizing a combined cyclic voltammetry – Nernst theory analysis approach in FLiNaK salt. To verify the constructed diagrams, X-ray diffraction was utilized after exposure of Cr at various applied potentials to determine whether compounds detected in solidified FLiNaK salts agreed with thermodynamic calculations. This work aims to identify key thermodynamic factors that are significant to chromium corrosion for molten salt nuclear reactor applications. The F - stability region spans the entire region where spontaneous corrosion of Cr occurs. Cr may be oxidized to Cr 2+ and Cr 3+ in the presence HF (due to moisture as an impurity) spontaneously except some conditions of p 1/2 H 2 /a HF etc. This situation is not changed qualitatively for various states of solvation between oxidized Cr solute in F - solvent and this aspect is substantially similar for the two cases (pair 1: Cr 0 /CrF 3 - / CrF 6 3- ; pair 2: Cr 0 /CrF 4 2- /CrF 5 2- ) considered in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Removal and recovery of ammonia from simulated wastewater using Ti3C2Tx MXene in flow electrode capacitive deionization

Abstract Flowing electrode capacitive deionization systems (FE-CDI) have recently garnered attention because of their ability to prevent cross contamination and operate in uninterrupted cycles ad infinitum. Typically, FE-CDI electrodes suffer from low conductivity, reducing deionization performance. Utilization of higher mass loadings to combat this leads to poor rheological properties. Herein, Ti 3 C 2 T x MXene was introduced as 1 mg mL −1 slurry electrodes in an FE-CDI system for the removal and recovery of ammonia from simulated agricultural wastewater. The electrode performance was evaluated by operating the FE-CDI system with a feed solution of 500 mg L −1 NH 4 Cl running in batch mode at a constant voltage of 1.20 and −1.20 V in charging and discharging modes, respectively. Despite the low loading, Ti 3 C 2 T x flowing electrodes showed markedly improved performance, achieving 60% ion removal efficiency in a saturation time of 115 min with an adsorption capacity of 460 mg g −1 . To understand the high adsorption performance of the electrodes, physiochemical and structural analysis was done via a variety of characterization techniques such as SEM, TEM, XRD, DLS, and Raman spectroscopy. Cyclic voltammetry and galvanostatic charge/discharge profiles were obtained to evaluate the electrochemical properties of the electrodes. The system proved to be an energy-saving technology by exhibiting a charge efficiency of 58–70% while operating at an energy consumption of 0.45 kWh kg −1 . A 92% regeneration efficiency showed that the electrodes were stable and suitable for long term and scalable usage. The results demonstrate that MXenes have the potential to improve the FE-CDI process for energy-efficient removal and recovery of ammonia.

36 MATERIALS SCIENCE↗