Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIOLATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A fault-tolerant software strategy for digital systems

Techniques developed for producing fault-tolerant software are described. Tolerance is required because of the impossibility of defining fault-free software. Faults are caused by humans and can appear anywhere in the software life cycle. Tolerance is effected through error detection, damage assessment, recovery, and fault treatment, followed by return of the system to service. Multiversion software comprises two or more versions of the software yielding solutions which are examined by a decision algorithm. Errors can also be detected by extrapolation from previous results or by the acceptability of results. Violations of timing specifications can reveal errors, or the system can roll back to an error-free state when a defect is detected. The software, when used in flight control systems, must not impinge on time-critical responses. Efforts are still needed to reduce the costs of developing the fault-tolerant systems.

Hitt, E. F.↗

Automation of assertion testing - Grid and adaptive techniques

Assertions can be used to automate the process of testing software. Two methods for automating the generation of input test data are described in this paper. One method selects the input values of variables at regular intervals in a 'grid'. The other, adaptive testing, uses assertion violations as a measure of errors detected and generates new test cases based on test results. The important features of assertion testing are that: it can be used throughout the entire testing cycle; it provides automatic notification of error conditions; and it can be used with automatic input generation techniques which eliminate the subjectivity in choosing test data.

Andrews, D. M.↗

Does nucleation theory apply to the formation of refractory circumstellar grains?

It is pointed out that kinetic factors inherent in cosmic systems will prevent the attainment of an approximate equilibrium precondensation cluster distribution, and that therefore such systems will violate one of the most fundamental assumptions of nucleation theory. More importantly, it is shown that of the 11 refractory metal/metal oxide systems which have been studied experimentally none are consistent with the predictions of either classical nucleation theory or the Lothe-Pound modification. Since no valid method is known by which these deficiencies can be circumvented, it is concluded that nucleation theory cannot be made to work in expanding circumstellar shells. However, a stochastic, kinetic treatment which makes use of experimental and theoretical data for specific refractory systems does appear to be feasible.

Donn, B.↗

The application of the detection filter to aircraft control surface and actuator failure detection and isolation

The performance of the detection filter in detecting and isolating aircraft control surface and actuator failures is evaluated. The basic detection filter theory assumption of no direct input-output coupling is violated in this application due to the use of acceleration measurements for detecting and isolating failures. With this coupling, residuals produced by control surface failures may only be constrained to a known plane rather than to a single direction. A detection filter design with such planar failure signatures is presented, with the design issues briefly addressed. In addition, a modification to constrain the residual to a single known direction even with direct input-output coupling is also presented. Both the detection filter and the modification are tested using a nonlinear aircraft simulation. While no thresholds were selected, both filters demonstrated an ability to detect control surface and actuator failures. Failure isolation may be a problem if there are several control surfaces which produce similar effects on the aircraft. In addition, the detection filter was sensitive to wind turbulence and modeling errors.

Bonnice, W. F.↗

Tracer transport by planetary waves - A comparison of explicit and parameterized models

A two-dimensional stratospheric tracer transport parameterization is developed using the theory of small-amplitude generalized Lagrangian means and tested by two experiments. The first tests the parameterization for mean climatological winter conditions without wave transience; the second tests it in the presence of transience and critical layers, when nonacceleration conditions are strongly violated. Tracer transport by Eulerian velocity, the residual velocity, and the nondivergent mean meridional Lagrangian velocity are compared.

Hess, P. G.↗

Cryogenic Equivalence Principle Experiment

The purpose of this project is to test the equivalence of inertial and passive gravitational mass in an Earth-orbiting satellite. A ground-based experiment is now well developed. It consists of comparing the motions of two cylindrical test masses suspended in precision superconducting magnetic bearings and free to move along the horizontal (axis) direction. The masses are made of niobium and lead-plated aluminum. A position detector based on a SQUID magnetometer measures the differential motion between the masses. The periods of the masses are matched by adjustment of the position detector until the system is insensitive to common mode signals, and so that the experiment is less sensitive to seismic vibration. The apparatus is contained in a twelve inch helium dewar suspended in a vibration isolation stand. The stand achieves 30 db isolation from horizontal motions between 0.1 and 60 Hz, by simulating the motion of a 200 meter long pendulum with an air bearing. With this attenuation of seismic noise and a common mode rejection ratio of 10 to the 5th power in the differential mode, the ground based apparatus should have a sensitivity to equivalence principle violations of one part in 10 to the 13th power; the satellite version might have a sensitivity of one part in 10 to the 17th power.

Everitt, C. W. F.↗

The cognitive connection: Software maintenance and documentation

With the goal of trying to understand what software maintainers do, talking aloud, video taped protocols with four expert maintainers were conducted as they were actively engaged in the process of enhancing a relatively small, interactive database program. The subjects exhibited a number of different types of information gathering strategies. Underlying these patterns of behavior, however, was the use of expectations about what should be seen in the program under examination. These expectations were generated on the basis of knowledge previously acquired as to the goals and programming plans that are typically employed in realizing interactive database programs. Thus, while the experts seemed to posses adequate programming knowledge, their actual code patches violated a basic principle of program structure. This failure by the programmers was attributed to ineffective program documentation. Suggestions for changes in the content of program documentation that should better facilitate software maintenance are presented.

Soloway, E.↗

Effects of Rayleigh and Newtonian damping on wave-mean flow interaction

A theoretical study is made of the effects of mean damping on wave-mean flow interactions. A condition is derived for the Eliassen-Palm flux divergence to balance the steady-state residual circulations induced by eddies in the presence of mean damping. It is shown by a simple analytical model that this balance holds for stratospheric planetary waves when the Rayleigh friction coefficient is one order smaller than the Newtonian cooling coefficient, although the tall mean flow condition is not violated. In this case, the Eliassen-Palm flux divergence can be interpreted as approximating the steady residual circulation (approximately equal to Lagrangian-mean circulations) induced by eddies as well as the net mean acceleration in the absence of mean damping. This balance is consistent with the stratospheric circulations of a dynamical model.

Hayashi, Y.↗

A note on Hapke's bidirectional reflectance spectroscopy. Part 3: Correction for macroscopic roughness

The multiple-scattering theory of K. Lumme and E. Bowell (1981) was criticized by B. Hapke by stating, in particular, that energy is not conserved. It is shown that Hapke's treatment is, in this respect, inferior to that of Lumme and Bowell, and itself violates the principal concepts of radiative transfer theory. Hapke's additinal claim that, in Lumme and Bowell's work, the reflectance tends to zero at the limb is also refuted. Comment is made on the deduction of surface physical properties by modeling photometric observations.

Lumme, K.↗

Emulsion chamber observations and interpretation (HE 3)

Experimental results from Emulsion Chamber (EC) experiments at mountain altitudes or at higher levels using flying carriers are examined. The physical interest in this field is concentrated on the strong interaction at the very high energy region exceeding the accelerator energy, also on the primary cosmic ray intensity and its chemical composition. Those experiments which observed cosmic ray secondaries gave information on high energy interaction characteristics through the analyses of secondary spectra, gamma-hadron families and C-jets (direct observation of the particle production occuring at the carbon target). Problems of scaling violation in fragmentation region, interaction cross section, transverse momentum of produced secondaries, and some peculiar features of exotic events are discussed.

Shibata, M.↗

Cosmic ray anisotropies at high energies

The directional anisotropies of the energetic cosmic ray gas due to the relative motion between the observers frame and the one where the relativistic gas can be assumed isotropic is analyzed. The radiation fluxes formula in the former frame must follow as the Lorentz invariance of dp/E, where p, E are the 4-vector momentum-energy components; dp is the 3-volume element in the momentum space. The anisotropic flux shows in such a case an amplitude, in a rotating earth, smaller than the experimental measurements from say, EAS-arrays for primary particle energies larger than 1.E(14) eV. Further, it is shown that two consecutive Lorentz transformations among three inertial frames exhibit the violation of dp/E invariance between the first and the third systems of reference, due to the Wigner rotation. A discussion of this result in the context of the experimental anisotropic fluxes and its current interpretation is given.

Martinic, N. J.↗

Convection beneath young oceanic lithosphere - Implications for thermal structure and gravity

Small-scale convection under the oceanic lithosphere which begins in the first 5 m.y. of cooling can produce a gravity signal with the amplitude and wavelength observed for large areas of the central Pacific and southern Indian oceans using Seasat altimeter data. The trend of the observed anomalies is parallel to the direction of plate motion as might be expected if they were produced by small-scale convection. Models predict that the wavelengths of gravity anomalies increase more rapidly with age than is observed. The persistence of short relatively uniform wavelength anomalies (less than 200 km) to crustal ages of 50 Ma may indicate that they were produced when the lithosphere was very young and thin and were 'frozen in' as cooling thickened the elastic lithosphere. Small-scale convection which begins under very young lithosphere does not violate other geophysical data such as the rate of seafloor subsidence and variations of geoid height with age. After convection has begun, the subsidence due to thermal contraction within the lithosphere varies linearly with age, in the absence of mantle heat sources, although the rate of change of these quantities is affected by convection. Much of the variation of the geoid height across fracture zones can be fit by a model which includes small-scale convection.

Buck, W. R.↗

Global dynamics and thermal structure of Jupiter's atmosphere

Voyager flyby observations have yielded the first detailed maps of wind and temperature fields in the Jupiter atmosphere; these data indicate that Jupiter's zonal currents violate the barotropic instability criterion if they extend only a few scale heights below the cloud tops. Microwave observations at mm and cm wavelengths have probed the atmosphere down to a level of about 7 bars, thereby constraining horizontal and vertical thermal structure in a region of the atmosphere about which little was known. Temporal variations in the temperature field suggest that dynamical processes may be important in the establishment of tropopause structure on short time scales. Ground-based and Voyager observations have also indicated a hemispheric asymmetry in temperature in the upper stratosphere.

Flasar, F. M.↗

IRAS observations of the nuclear bulge of M31

IRAS observations of the nuclear bulge of M31 are reported. The 12-micron and 25-micron emission is attributed to circumstellar dust emission from late-type stars, while the 60 and 100-micron emission is attributed to interstellar dust emission. The total input rate of circumstellar gas and dust into the interstellar medium is estimated to be 0.015 solar masses/yr. The mass of dust in the interstellar medium estimated from the far-infared flux is about 1500 solar masses. The color temperature of the far-infrared-emitting dust is 45 K. The time required to accumulate the observed mass in interstellar dust is about 10 million yr. Either supernova-generated winds or star formation can deplete this gas without violating the observations.

Soifer, B. T.↗

Precision maneuver determination for trajectory corrections

The interplanetary navigation of a spacecraft requires precise calculation of trajectory correction maneuver parameters. Velocity increments must be found which make the required corrections, minimize propellant consumption, and do not violate hardware design constraints or scientific objectives. This process is illustrated by its application to the Galileo Mission. The paper describes inflight analysis techniques, mathematical modeling, and computational algorithms used in the precision maneuver calculation scenario.

Hintz, G. R.↗

Equivalence of active and passive gravitational mass using the moon

Based on an asymmetry in the composition of the moon, a limit is established for the violation of the equity of passive and active gravitational mass. It is suggested that the 2-km offset between the moon's center of figure and center of mass imply an asymmetry in the distribution of Fe and Al, and that the Fe on one side and the Al on the other must attract another with equal force in order for the moon to follow the orbit predicted by classical mechanics. Based on laser ranging data and a model for the moon's interior, the ratios of active to passive mass for Fe and Al are found to be equal to a precision of 4 x 10 to the -12th.

Bartlett, D. F.↗

Orientation and temperature dependence of some mechanical properties of the single-crystal nickel-base superalloy Rene N4. I - Tensile behavior

Single crystal specimens of a nickel-base superalloy with axes near 001, 011, and -112 were tested in tension at room temperature, 760, and 980 C. The alloy Rene N-4, was developed for gas turbine engine blades and has the nominal composition 3.7 Al, 4.2 Ti, 4 Ta, 0.5 Nb, 6 W, 1.5 Mo, 9 Cr, 7.5 Co, balance Ni, (all in weight percent). Analysis of slip band traces, specimen axis rotation, and dislocation Burgers vectors showed that at 760 and 980 C primary cube slip supplanted normal octahedral slip for the -112 line-oriented specimens. The other two orientations, which have lower resolved shear stresses on the cube system, exhibited octahedral slip at all three temperatures. The critical resolved shear stress is considerably greater on the cube system than on the octahedral system at room temperature. However, at 760 and 980 C the critical resolved shear stresses on the two systems are about the same. While the room temperature and 980 C yield strengths for the two orientations exhibiting octahedral slip could be rationalized on the basis of resolved shear stress, those at 760 C could not. Such violations of Schmid's law have previously been observed in other superalloys and single phase gamma-prime.

Miner, R. V.↗

Variation objective analyses for cyclone studies

The objectives were to: (1) develop an objective analysis technique that will maximize the information content of data available from diverse sources, with particular emphasis on the incorporation of observations from satellites with those from more traditional immersion techniques; and (2) to develop a diagnosis of the state of the synoptic scale atmosphere on a much finer scale over a much broader region than is presently possible to permit studies of the interactions and energy transfers between global, synoptic and regional scale atmospheric processes. The variational objective analysis model consists of the two horizontal momentum equations, the hydrostatic equation, and the integrated continuity equation for a dry hydrostatic atmosphere. Preliminary tests of the model with the SESMAE I data set are underway for 12 GMT 10 April 1979. At this stage of purpose of the analysis is not the diagnosis of atmospheric structures but rather the validation of the model. Model runs for rawinsonde data and with the precision modulus weights set to force most of the adjustment of the wind field to the mass field have produced 90 to 95 percent reductions in the imbalance of the initial data after only 4-cycles through the Euler-Lagrange equations. Sensitivity tests for linear stability of the 11 Euler-Lagrange equations that make up the VASP Model 1 indicate that there will be a lower limit to the scales of motion that can be resolved by this method. Linear stability criteria are violated where there is large horizontal wind shear near the upper tropospheric jet.

Achtemeier, G. L.↗