Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VECTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Vector perturbations of galaxy number counts

We derive the contribution to relativistic galaxy number count fluctuations from vector and tensor perturbations within linear perturbation theory. Our result is consistent with the the relativistic corrections to number counts due to scalar perturbation, where the Bardeen potentials are replaced with line-of-sight projection of vector and tensor quantities. Since vector and tensor perturbations do not lead to density fluctuations the standard density term in the number counts is absent. We apply our results to vector perturbations which are induced from scalar perturbations at second order and give numerical estimates of their contributions to the power spectrum of relativistic galaxy number counts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

First experience of vectorizing electromagnetic physics models for detector simulation

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. The GeantV vector prototype for detector simulations has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth, parallelization needed to achieve optimal performance or memory access latency and speed. An additional challenge is to avoid the code duplication often inherent to supporting heterogeneous platforms. In this paper we present the first experience of vectorizing electromagnetic physics models developed for the GeantV project.

Amadio, G.↗
DOE OSTI2021

VipariNama: RNA viral vectors to rapidly elucidate the relationship between gene expression and phenotype

Synthetic transcription factors have great promise as tools to help elucidate relationships between gene expression and phenotype by allowing tunable alterations of gene expression without genomic alterations of the loci being studied. However, the years-long timescales, high cost, and technical skill associated with plant transformation have limited their use. In this work, we developed a technology called VipariNama (ViN) in which vectors based on the tobacco rattle virus are used to rapidly deploy Cas9-based synthetic transcription factors and reprogram gene expression in planta. We demonstrate that ViN vectors can implement activation or repression of multiple genes systemically and persistently over several weeks in Nicotiana benthamiana, Arabidopsis (Arabidopsis thaliana), and tomato (Solanum lycopersicum). By exploring strategies including RNA scaffolding, viral vector ensembles, and viral engineering, we describe how the flexibility and efficacy of regulation can be improved. We also show how this transcriptional reprogramming can create predictable changes to metabolic phenotypes, such as gibberellin biosynthesis in N. benthamiana and anthocyanin accumulation in Arabidopsis, as well as developmental phenotypes, such as plant size in N. benthamiana, Arabidopsis, and tomato. These results demonstrate how ViN vector-based reprogramming of different aspects of gibberellin signaling can be used to engineer plant size in a range of plant species in a matter of weeks. In summary, ViN accelerates the timeline for generating phenotypes from over a year to just a few weeks, providing an attractive alternative to transgenesis for synthetic transcription factor-enabled hypothesis testing and crop engineering.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

In-plane Néel wall chirality and orientation of interfacial Dzyaloshinskii-Moriya vector in magnetic films

The interfacial Dzyaloshinskii-Moriya interaction (DMI) is of great interest as it can stabilize chiral spin structures in thin films. Experiments verifying the orientation of the interfacial DMI vector remain rare, in part due to the difficulty of separating vector components of DMI. In this study, Fe/Ni bilayers and Co/Ni multilayers were deposited epitaxially onto Cu(001) and Pt(111) substrates, respectively. By tailoring the effective anisotropy, spin reorientation transitions (SRTs) are employed to probe the orientation of the DMI vector by measuring the spin structure of domain walls on both sides of the SRTs. In our results, the interfacial DMI is found to be sufficiently strong to stabilize chiral Néel walls in the out-of-plane magnetized regimes, while achiral Néel walls are observed in the in-plane magnetized regimes. Furthermore, these findings experimentally confirm that the out-of-plane component of the DMI vector is insignificant in these fcc(001) and fcc(111) oriented interfaces, even in the presence of atomic steps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Uniaxial Néel vector control in perovskite oxide thin films by anisotropic strain engineering

Antiferromagnetic (AF) thin films typically exhibit a multidomain state, and control of the AF Néel vector is challenging, as AF materials are robust to magnetic perturbations. In this paper, uniaxial Néel vector control is demonstrated by relying on anisotropic strain engineering of epitaxial thin films of the prototypical AF material LaFeO 3 (LFO). Orthorhombic (011)- and (101)-oriented DyScO 3 , GdScO 3 , and NdGaO 3 substrates are used to engineer different anisotropic in-plane strain states. The anisotropic in-plane strain stabilizes structurally monodomain monoclinic LFO thin films. The uniaxial Néel vector is found along the tensile strained b axis, contrary to bulk LFO having the Néel vector along the shorter a axis, and no magnetic domains are found. Hence, anisotropic strain engineering is a viable tool for designing unique functional responses, further enabling AF materials for mesoscopic device technology.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Root-N Krylov-space correction vectors for spectral functions with the density matrix renormalization group

In this work, we propose a method to compute spectral functions of generic Hamiltonians using the density matrix renormalization group (DMRG) algorithm directly in the frequency domain, based on a modified Krylov-space decomposition to compute the correction vectors. Our approach entails the calculation of the root-N (N=2 is the standard square root) of the Hamiltonian propagator using Krylov-space decomposition and repeating this procedure N times to obtain the actual correction vector. We show that our method greatly alleviates the burden of keeping a large bond dimension at large target frequencies, a problem found with conventional correction-vector DMRG, whereas achieving better computational performance at large N. We apply our method to spin and charge spectral functions of t-J and Hubbard models in the challenging two-leg ladder geometry and provide evidence that the root-N approach reaches a much improved spectral resolution compared to the conventional correction vector.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Relic cosmological vector fields and inflationary gravitational waves

Here we show that relic vector fields can significantly impact a spectrum of primordial gravitational waves in the postinflationary era. We consider a triplet of U(1) fields in a homogeneous, isotropic configuration. The interaction between the gravitational waves and the vector fields, from the end of reheating to the present day, yields novel spectral features. The amplitude, tilt, shape, and net chirality of the gravitational wave spectrum are shown to depend on the abundance of the electric- and magneticlike vector fields. Our results show that even a modest abundance can have strong implications for efforts to detect the imprint of gravitational waves on the cosmic microwave background polarization. We find that a vector field comprising less than 2% of the energy density during the radiation-dominated era can have a greater than order unity effect on the predicted inflationary gravitational wave spectrum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Production of heavy sterile neutrinos from vector boson decay at electroweak temperatures

Here, in the standard model extended with a seesaw mass matrix, we study the production of sterile neutrinos from the decay of vector bosons at temperatures near the masses of the electroweak bosons. We derive a general quantum kinetic equation for the production of sterile neutrinos and their effective mixing angles, which is applicable over a wide range of temperature, to all orders in interactions of the standard model and to leading order in a small mixing angle for the neutrinos. We emphasize the relation between the production rate and Landau damping at one-loop order and show that production rates and effective mixing angles depend sensitively upon the neutrino’s helicity. Sterile neutrinos with positive helicity interact more weakly with the medium than those with negative helicity, and their effective mixing angle is not modified significantly. Negative helicity states couple more strongly to the vector bosons, but their mixing angle is strongly suppressed by the medium. Consequently, if the mass of the sterile neutrino is ≲ 8.35 MeV , there are fewer states with negative helicity produced than those with positive helicity. There is an Mikheyev-Smirnov-Wolfenstein-type resonance in the absence of lepton asymmetry, but due to screening by the damping rate, the production rate is not enhanced. Sterile neutrinos with negative helicity freeze out at T$-\atop{f}$ ≃ 5 GeV , whereas positive helicity neutrinos freeze out at T$+\atop{f}$≃ 8 GeV , with both distributions far from thermal. As the temperature decreases, due to competition between a decreasing production rate and an increasing mixing angle, the distribution function for states with negative helicity is broader in momentum and hotter than that for those with positive helicity. Sterile neutrinos produced via vector boson decay do not satisfy the abundance, lifetime, and cosmological constraints to be the sole dark matter component in the Universe. Massive sterile neutrinos produced via vector boson decay might solve the 7 Li problem, albeit at the very edge of the possible parameter space. A heavy sterile neutrino with a mass of a few MeV could decay into light sterile neutrinos, of a few keV in mass, that contribute to warm dark matter. In conclusion, we argue that heavy sterile neutrinos with lifetime ≤1/H 0 reach local thermodynamic equilibrium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

A Computational Efficient Space-Vector Modulation Scheme for A Hybrid Seven-Level Converter for Medium Voltage Grid-Tied Applications

In this paper, a fast space-vector modulation (SVM) scheme is proposed for a hybrid 7-level (7-L) converter, i.e., cascaded T-type converter and H-bridge converters, for grid-tied applications. Using oblique coordinate reference, the proposed SVM can quickly locate the switching triangle enclosing the reference vector in the 7-L space vector diagram. Then all available switching sequences and vector duty cycles are acquired by straightforward calculation without using any look-up tables, which significantly reduces the computational cost. The floating capacitor voltages are also stabilized by using the proposed SVM. Experimental studies on a scale-down prototype are presented in this work to validate the effectiveness of the proposed scheme.

Diao, Fei↗
DOE OSTI2023

Alternative Vector PWM for CSI Common-Mode Voltage Reduction During Voltage-Boost Operation with Low Modulation Index

This paper proposes a new pulse-width modulation (PWM) scheme named alternative vector PWM (AVM) algorithm that reduces the common-mode voltage (vCM) generated by a 3-phase current source inverter (CSI) during operation within a portion of its voltage-boost regime when the CSI’s modulation index is below 1/3–√(=0.5774). Three different active current vector pairs (one conventional pair with adjacent active current vectors and two proposed pairs with non-adjacent active current vectors) are used to reduce vCM based on the CSI’s output voltage conditions. Experimental results confirm significant reductions in major vCM spectral components by up to approx. 85% between the 3rd harmonic of the fundamental frequency and the CSI’s PWM frequency, validating the advantages of the proposed AVM algorithm over the conventional PWM.

42 ENGINEERING↗
DOE OSTI2016

On the Impact of Widening Vector Registers on Sequence Alignment

Vector extensions, such as SSE, have been part of the x86 since the 1990s, with applications in graphics, signal processing, and scientific applications. Although many algorithms and applications can naturally benefit from automatic vectorization techniques, there are still many that are difficult to vectorize due to their dependence on irregular data structures, dense branch operations, or data dependencies. Sequence alignment, one of the most widely used operations in bioinformatics workflows, has a computational footprint that features complex data dependencies. In this paper, we demonstrate that the trend of widening vector registers adversely affects the state-of-the-art sequence alignment algorithm based on striped data layouts. We present a practically efficient SIMD implementation of a parallel scan based sequence alignment algorithm that can better exploit wider SIMD units. We conduct comprehensive workload and use case analyses to characterize the relative behavior of the striped and scan approaches and identify the best choice of algorithm based on input length and SIMD width.

Needleman-Wunsch↗
DOE OSTI2021

Automated Registration of Vector Data to Overhead Imagery

The availability of open source, remote sensing-derived vector data has increased exponentially in recent years. Unfortunately, these vector data are rarely made available with the corresponding source images from which objects were extracted. As such, these derived datasets are commonly used in combination with target images which differ from the source. Satellite viewing geometry can cause objects, extracted from a source image, to appear shifted when overlaid with a target image. Whether for purely cartographic purposes, reusability of preexisting training labels, or any spatial analysis where spatial correspondence between vector and image are required, the following paragraphs outline a method to address this challenge through the automated registration of vector data to overhead imagery, including existing literature regarding this challenge, followed by a case study of Sioux Falls, South Dakota.

McKee, Jacob↗
DOE OSTI2023

Scaling Automatic Vector Data Alignment to Satellite Imagery

Given the tremendous volume of accessible Earth Observation (EO) data, there is a need to develop scalable Geospatial Artificial Intelligence (GeoAI) solutions for time-sensitive applications. Scalability in this context refers to rapidly processing large-scale EO data using high performance computing resources. Accurate mapping of the built environment from remote sensing (RS) imagery has been one of the crucial components in GeoAI workflows for a wide spectrum of humanitarian applications. Derived vector data of built environment is often leveraged for disaster preparedness and response activities. However, factors such as differences in ortho-rectification, atmospheric conditions and human error, results in spatial misalignment between vector data and the timely available RS imagery. Model training for downstream tasks such as object detection, change analysis, etc., is negatively impacted due to such spatial misalignment. Although there has been progress towards automatic alignment of vector data, the lack of scalability remains an open research challenge. This paper proposes to leverage parallel computing to optimize an automatic vector data alignment workflow. It further employs CPU-level multi-core parallelism for improving the performance of the workflow for scalable built environment mapping. We report observations and discuss findings from the preliminary experiments performed on the Summit Supercomputer.

Potnis, Abhishek↗
DOE OSTI2017

A Work-Efficient Parallel Sparse Matrix-Sparse Vector Multiplication Algorithm

We design and develop a work-efficient multithreaded algorithm for sparse matrix-sparse vector multiplication (SpMSpV) where the matrix, the input vector, and the output vector are all sparse. SpMSpV is an important primitive in the emerging GraphBLAS standard and is the workhorse of many graph algorithms including breadth-first search, bipartite graph matching, and maximal independent set. As thread counts increase, existing multithreaded SpMSpV algorithms can spend more time accessing the sparse matrix data structure than doing arithmetic. Our shared-memory parallel SpMSpV algorithm is work efficient in the sense that its total work is proportional to the number of arithmetic operations required. The key insight is to avoid each thread individually scan the list of matrix columns. Our algorithm is simple to implement and operates on existing column-based sparse matrix formats. It performs well on diverse matrices and vectors with heterogeneous sparsity patterns. A high-performance implementation of the algorithm attains up to 15x speedup on a 24-core Intel Ivy Bridge processor and up to 49x speedup on a 64-core Intel KNL manycore processor. In contrast to implementations of existing algorithms, the performance of our algorithm is sustained on a variety of different input types include matrices representing scale-free and high-diameter graphs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Search for heavy resonances that decay into a vector boson and a Higgs boson in hadronic final states at $\sqrt{s} = 13$ $\,\text {TeV}$

A search for heavy resonances with masses above 1 $\,\text {TeV}$ , decaying to final states containing a vector boson and a Higgs boson, is presented. The search considers hadronic decays of the vector boson, and Higgs boson decays to b quarks. The decay products are highly boosted, and each collimated pair of quarks is reconstructed as a single, massive jet. The analysis is performed using a data sample collected in 2016 by the CMS experiment at the LHC in proton-proton collisions at a center-of-mass energy of 13 $\,\text {TeV}$ , corresponding to an integrated luminosity of 35.9 $\,\text {fb}^{-1}$ . The data are consistent with the background expectation and are used to place limits on the parameters of a theoretical model with a heavy vector triplet. In the benchmark scenario with mass-degenerate $\mathrm{W^{'}}$ and $\mathrm{Z}' $ bosons decaying predominantly to pairs of standard model bosons, for the first time heavy resonances for masses as high as 3.3 $\,\text {TeV}$ are excluded at 95% confidence level, setting the most stringent constraints to date on such states decaying into a vector boson and a Higgs boson.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Search for pair-produced vector-like top and bottom partners in events with large missing transverse momentum in $pp$ collisions with the ATLAS detector

A search for pair-produced vector-like quarks using events with exactly one lepton ($e$ or $μ$), at least four jets including at least one $b$-tagged jet, and large missing transverse momentum is presented. Data from proton–proton collisions at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV, recorded by the ATLAS detector at the LHC from 2015 to 2018 and corresponding to an integrated luminosity of 139 fb –1 , are analysed. Vector-like partners $T$ and $B$ of the top and bottom quarks are considered, as is a vector-like $X$ with charge +5/3, assuming their decay into a $W$, $Z$, or Higgs boson and a third-generation quark. No significant deviations from the Standard Model expectation are observed. Upper limits on the production cross-section of $T$ and $B$ quark pairs as a function of their mass are derived for various decay branching ratio scenarios. The strongest lower limits on the masses are 1.59 assuming mass-degenerate vector-like quarks and branching ratios corresponding to the weak-isospin doublet model, and 1.47 TeV (1.46 TeV) for exclusive $T$→$Zt$ ($B/X$→$Wt$) decays. In addition, lower limits on the $T$ and $B$ quark masses are derived for all possible branching ratios.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Search for electroweak production of vector-like leptons in $\tau$-lepton and b-jet final states in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A search for pair-production of vector-like leptons is presented, considering their decays into a third-generation Standard Model (SM) quark and a vector leptoquark ( U 1 ) as predicted by an ultraviolet-complete extension of the SM, referred to as the ‘4321’ model. Given the assumed decay of U 1 into third-generation SM fermions, the final state can contain multiple τ-leptons and b-quarks. This search is based on a dataset of pp collisions at $\sqrt{s}=13$ TeV recorded with the ATLAS detector during Run 2 of the Large Hadron Collider, corresponding to an integrated luminosity of up to $140~\textrm{fb}^{-1}$. No significant excess above the SM background prediction is observed, and 95% confidence level limits on the cross-section times branching ratio are derived as a function of the vector-like lepton mass. A lower observed (expected) limit of 910 GeV (970 GeV) is set on the vector-like lepton mass. Additionally, the results are interpreted for a supersymmetric model with an R-parity violating coupling to the third-generation quarks and leptons. Lower observed (expected) limits are obtained on the higgsino mass at 880 GeV (940 GeV) and on the wino mass at 1170 GeV (1170 GeV).

Aad, G. [CPPM, Aix-Marseille Université, CNRS/IN2P↗
DOE OSTI2017

Exploiting Vector and Multicore Parallelsim for Recursive, Data- and Task-Parallel Programs

Modern hardware contains parallel execution resources that are well-suited for data-parallelism-vector units-and task parallelism-multicores. However, most work on parallel scheduling focuses on one type of hardware or the other. In this work, we present a scheduling framework that allows for a unified treatment of task- and data-parallelism. Our key insight is an abstraction, task blocks, that uniformly handles data-parallel iterations and task-parallel tasks, allowing them to be scheduled on vector units or executed independently as multicores. Our framework allows us to define schedulers that can dynamically select between executing task- blocks on vector units or multicores. We show that these schedulers are asymptotically optimal, and deliver the maximum amount of parallelism available in computation trees. To evaluate our schedulers, we develop program transformations that can convert mixed data- and task-parallel pro- grams into task block-based programs. Using a prototype instantiation of our scheduling framework, we show that, on an 8-core system, we can simultaneously exploit vector and multicore parallelism to achieve 14×-108× speedup over sequential baselines.

Ren, Bin↗