Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Unconventional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Weight estimation of unconventional structures by structural optimization

Automated techniques are presented that are used in structural optimization technology, with emphasis on modifications of finite element models to obtain an optimal material distribution for minimum weight while satisfying the prescribed design requirements. It is anticipated that the future development of computer aided engineering (CAE) system will provide environments where structural analysis, a design optimization, and weight evaluation modules are integrated, sharing a common data base. Structural optimization capabilities obtained by integrating a finite element structural analysis program and a numerical optimization code are developed and applied to two illustrative examples: marine gear housing structural weight minimization and joined wing structures.

Miura, Hirokazu↗
NASA NTRS1987

Unconventional food regeneration in space - Opportunities for microbial food production

The possible role of microbial species in regenerating food is considered, and three areas where microbial systems can be used in controlled ecological life support systems are discussed. Microbial species can serve as the biological portion of hybrid chemical/biological schemes for primary food products, as a means more fully to utilize waste materials from agronomical food production, and as a source of nutritional supplements to conventional plant foods. Work accomplished in each of these areas is described. The role of microgravity fermenters in this technology is addressed.

Petersen, Gene R.↗
NASA NTRS1989

Unconventional propellant performance

Theoretical calculations are made of rocket performance of exotic fuels at various operating conditions such as chamber pressure, pressure ratios, and oxidizer-to-fuel ratios. By exotic fuels, it is meant using materials that may not normally be used as fuels here on Earth due to low performance. The majority of the work is currently being done on a VAX using the CET 86 program by Gordon and McBride. The CET 86 program will be installed on our IBM PS/2 Model 80 to reduce computer costs. The JPL Solid Propellant Theoretical Performance program for the IBM was also used, it handles solid fuels better than the CET 86 program. The CET 86 program by Gordon and McBride was set on the VAX and results were obtained for a number of the propellant combinations being analyzed. A sample of these results is included. Several programs were written to reduce the large amounts of data generated to include only the information needed, such as specific impulse, temperature, etc. This work involves analyzing propellants at various operating conditions and determining which will give acceptable performance and yet be easily storable for long periods of time and be readily available in space missions.

Ramohalli, Kumar↗
NASA NTRS1990

Performance of unconventional propellants

This research involves the theoretical calculations of rocket performance for exotic propellants at various operating conditions, such as chamber pressure, pressure ratios, and oxidizer-to-fuel ratios. Exotic propellants are materials that may not normally be used as propellants on earth due to their low performance characteristics or other factors. The majority of the work was done using the Gordon and McBride CET 86 Program in both a mainframe version and personal computer versions. In addition, the Lockheed/Air Force Solid Propellant Theoretical Performance Program for the IBM PS/2, which handles condensed product species better, was also used.

Rascon, Mario↗
NASA NTRS1991

LEO effects on conventional and unconventional solar cell cover materials

In 1984, the LDEF (Long Duration Exposure Facility) was placed in LEO (low earth orbit) for a mission planned to last approximately one year. The effects of the LDEF mission environment (micrometeorite/debris impacts, atomic, atomic oxygen, UV, and particulate radiation) on the samples are described. The relative importance of these interactions is highly dependent on orbital altitude. There is no evidence that the impacts with the test samples (including solar cells) caused any electrical degradation. Evidence from a number of LDEF experiments suggests that the majority of the impacts observed on this experiment were of space debris, rather than micrometeorite origin.

Stella, Paul M.↗
NASA NTRS1992

NASA Space Astronomy Update 6: Unconventional Windows on the Universe

Professor Stu Bowyer (University of California at Berkeley) explains the Extreme Ultraviolet Explorer and its telescope in this video. Both instrument and satellite are kept in perfect working condition. The satellite picks up extra galactic objects outside our galaxy.

Source record↗
NASA NTRS2004

Variable Speed CMG Control of a Dual-Spin Stabilized Unconventional VTOL Air Vehicle

This paper describes an approach based on using both bias momentum and multiple control moment gyros for controlling the attitude of statically unstable thrust-levitated vehicles in hover or slow translation. The stabilization approach described in this paper uses these internal angular momentum transfer devices for stability, augmented by thrust vectoring for trim and other outer loop control functions, including CMG stabilization/ desaturation under persistent external disturbances. Simulation results show the feasibility of (1) improved vehicle performance beyond bias momentum assisted vector thrusting control, and (2) using control moment gyros to significantly reduce the external torque required from the vector thrusting machinery.

Lim, Kyong B.↗
NASA NTRS2012

JELC-LITE: Unconventional Instructional Design for Special Operations Training

Current special operations staff training is based on the Joint Event Life Cycle (JELC). It addresses operational level tasks in multi-week, live military exercises which are planned over a 12 to 18 month timeframe. As the military experiences changing global mission sets, shorter training events using distributed technologies will increasingly be needed to augment traditional training. JELC-Lite is a new approach for providing relevant training between large scale exercises. This new streamlined, responsive training model uses distributed and virtualized training technologies to establish simulated scenarios. It keeps proficiency levels closer to optimal levels -- thereby reducing the performance degradation inherent in periodic training. It can be delivered to military as well as under-reached interagency groups to facilitate agile, repetitive training events. JELC-Lite is described by four phases paralleling the JELC, differing mostly in scope and scale. It has been successfully used with a Theater Special Operations Command and fits well within the current environment of reduced personnel and financial resources.

Friedman, Mark↗
NASA NTRS2017

Extension of HCDstruct for Transonic Aeroservoelastic Analysis of Unconventional Aircraft Concepts

A substantial effort has been made to implement an enhanced aerodynamic modeling capability in the Higher-fidelity Conceptual Design and structural optimization tool. This additional capability is needed for a rapid, physics-based method of modeling advanced aircraft concepts at risk of structural failure due to dynamic aeroelastic instabilities. To adequately predict these instabilities, in particular for transonic applications, a generalized aerodynamic matching algorithm was implemented to correct the doublet-lattice model available in Nastran using solution data from a priori computational fluid dynamics anal- ysis. This new capability is demonstrated for two tube-and-wing aircraft configurations, including a Boeing 737-200 for implementation validation and the NASA D8 as a first use case. Results validate the current implementation of the aerodynamic matching utility and demonstrate the importance of using such a method for aircraft configurations featuring fuselage-wing aerodynamic interaction.

Quinlan, Jesse R.↗
NASA NTRS2018

Toward Cooling Uniformity: Investigation of Spiral, Sweeping Holes, and Unconventional Cooling Paradigms

Surface infrared thermography, hotwire anemometry, and thermocouple surveys were performed on two new film cooling hole geometries: spiral/rifled holes and fluidic sweeping holes. Ways to quantify the efficacy of novel cooling holes that are asymmetric, not uniformly spaced or that show variation from hole to hole are presented. The spiral holes attempt to induce large-scale vorticity to the film cooling jet as it exits the hole to prevent the formation of the kidney shaped vortices commonly associated with film cooling jets. The fluidic sweeping hole uses a passive in-hole geometry to induce jet sweeping at frequencies that scale with blowing ratios. The spiral hole performance is compared to that of round holes with and without compound angles. The fluidic hole is of the diffusion class of holes and is therefore compared to a 777 hole and square holes. A patent-pending spiral hole design showed the highest potential of the nondiffusion type hole configurations. Velocity contours and flow temperature were acquired at discreet cross-sections of the downstream flow field. The passive fluidic sweeping hole shows the most uniform cooling distribution but suffers from low span-averaged effectiveness levels due to enhanced mixing. The data was taken at a Reynolds number of 11,000 based on hole diameter and freestream velocity. Infrared thermography was taken for blowing ratios of 1.0, 1.5, 2.0, and 2.5 at a density ratio of 1.05. The flow inside the fluidic sweeping hole was studied using 3D unsteady RANS. A section on ideas for future work is included that addresses issues of quantifying cooling uniformity and provides some ideas for changing the way we think about cooling such as changing the direction of cooling or coupling acoustic devices to cooling holes to regulate frequency.

Shyam, Vikram↗
NASA NTRS2018

Solar Physics from Unconventional Viewpoints

We explore new opportunities for solar physics that could be realized by future missions providing sustained observations from vantage points away from the Sun-Earth line (SEL). These include observation from the far side of the Sun, at high latitudes including over the solar poles, or from near-quadrature angles relative to the Earth (e.g., the Sun-Earth L4 & L5 Lagrange points). Such observations fill known holes in our scientific understanding of the three-dimensional time-evolving Sun and heliosphere, and have the potential to open new frontiers through discoveries enabled by novel viewpoints.

Gibson, Sarah E.↗
NASA NTRS2018

Update on the Development of a Flutter Analysis Capability for Unconventional Aircraft Concepts Using HCDstruct

Following years of development, the Higher-fidelity Conceptual Design and structural optimization (HCDstruct) tool is being extended to support dynamic aeroservoelastic analysis and structural optimization for advanced aircraft concepts. These required enhancements include: the development of an aerodynamic matching routine for correcting Nastran’s doublet-lattice method aerodynamics; the implementation of control surface structural models; and the implementation of support for Nastran’s flutter solution sequence (SOL 145). This paper presents an update on the implementation of generalized control surface structural models and support for Nastran SOL 145.

Quinlan, Jesse R.↗
NASA NTRS2020

Material Remodelling and Unconventional Gaits Facilitate Locomotion of a Robophysical Rover Over Granular Terrain

Autonomous robots and vehicles must occasionally recover from locomotion failure in loosely consolidated granular terrain. Recent mobility challenges led NASA Johnson Space Center to develop a prototype robotic lunar rover Resource Prospector 15 (RP15) capable of wheeled, legged, and crawling behavior. To systematically understand performance of such a device, we developed a scaled-down rover robot and studied its locomotion on slopes of dry and wet granular media. Addition of a cyclic legged gait to the robot’s wheel spinning action changes the robot dynamics from that of a wheeled vehicle to a locomotor paddling through frictional fluid. Granular drag force measurements and modified Resistive Force Theory facilitate modeling of such dynamics. A peculiar gait strategy that agitates and cyclically reflows grains under the robot allows it to ‘swim’ up loosely consolidated hills. Whereas substrate disturbance typically hinders locomotion in granular media, the multi-mode design of RP15 and a diversity of possible gaits facilitate formation of self-organized localized frictional fluids that enable effective robust transport.

Siddharth Shrivastava↗
NASA NTRS2020

FlightStream® Technology Empowers NASA Engineers to Design Unconventional Aircraft

Research in Flight partnered with the NASA SBIR/STTR Program to enhance its FlightStream® software, which engineers use to calculate the aerodynamic performance and feasibility of aircraft concepts, particularly those with no historical performance data. The company has since gained industry recognition, with new customers and continued development with NASA.

Kimberly A Cannon↗
NASA NTRS2017

Unconventional Imaging with Contained Granular Media

Typically, the cost of a space-borne imaging system is driven by the size and mass of the primary aperture. The solution that we propose uses a method to construct an imaging system in space in which the nonlinear optical properties of a cloud of micron-sized particles, shaped into a specific surface by electromagnetic means, and allows one to form a very large and lightweight aperture of an optical system, hence reducing overall mass and cost. Recent work at JPL has investigated the feasibility of a granular imaging system, concluding that such a system could be built and controlled in orbit. We conducted experiments and simulation of the optical response of a granular lens. In all cases, the optical response, measured by the Modulation Transfer Function, of hexagonal reflectors was closely comparable to that of a conventional spherical mirror. We conducted some further analyses by evaluating the sensitivity to fill factor and grain shape, and found a marked sensitivity to fill factor but no sensitivity to grain shape. We have also found that at fill factors as low as 30%, the reflection from a granular lens is still excellent. Furthermore, we replaced the monolithic primary mirror in an existing integrated model of an optical system (WFIRST Coronagraph) with a granular lens, and found that the granular lens that can be useful for exoplanet detection provides excellent contrast levels. We will present our testbed and simulation results in this paper.

Sidick, Erkin↗
NASA NTRSDate not supplied

The LHS 1678 System: Two Small Planets and a Likely Brown Dwarf Orbiting a Nearby M Dwarf in Unconventional Circumstances

We present the LHS 1678 (TOI-696) exoplanet system: two nearly Earth-sized transiting planets detected by TESS and a likely brown dwarf orbiting a bright M2 dwarf at 19.9 pc. The ultra-short-period LHS 1678 b (0.70 Earth radii, 0.9-day orbit) is a captivating target for emission spectroscopy observations with the JWST. LHS 1678 c (0.98 Earth radii, 3.7- day orbit) is in the Venus-zone and may be Venus density: a promising target for greenhouse effect studies. Both planets are favorable targets for EPRV mass measurements and for JWST transmission spectroscopy observations to study their atmospheres. The substellar companion, detected via CTIO/SMARTS 0.9m astrometry, is on a decades-long orbit and may someday eclipse the host star, revealing a rare system architecture in which more and less massive objects orbit in the same plane. There is also a candidate third planet detected in TESS multi-cycle data in near 4:3 resonance with LHS 1678 c. The host star is associated with an observed gap in the HR diagram tied to a change in M dwarf energy transport mechanisms. The effect of the associated stellar astrophysics on exoplanet evolution is currently unknown. In aggregate, LHS 1678 an exciting playground for comparative exoplanet science and understanding the formation and evolution of small, short-period exoplanets orbiting low-mass stars.

Michele L Silverstein↗