Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Turbulence modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

High Efficiency 2-Bladed Utility Wind Turbine Enhanced by CoFlow Jet Active Flow Control

The aerodynamic performance and power output of a high efficiency Co-Flow Jet (CFJ) 2-bladed Wind Turbine is studied in this paper. CFJ is a Zero-Net-Mass-Flux (ZNMF) active flow control method that dramatically increases airfoil lift coefficient and suppresses flow separation at a low energy expenditure. The 3D Reynolds Averaged Navier-Stokes (RANS) equations with one-equation Spalart-Allmaras (SA) turbulence model are solved to simulate the 3D flows of the wind turbines. The CFJ-Wind Turbine in this paper is modified from the NREL 3-bladed 3.4 MW reference wind turbine with the same RPM, blade length, distribution of chord, twist, and bending. The CFJ 2-bladed wind turbine utilizes the CFJ-NACA 64 series airfoils at most of the blade span from 31.88\% to the tip. The CFJ injection and suction slots are implemented along the full blade span to enhance the effectiveness and power output. The study shows that the 2-bladed CFJ turbine significantly increases power output compared with the 3-bladed baseline turbine at all wind speeds by 15.8\% at the wind speed of 9.8 m/s and by 25.9\% at 4 m/s respectively. The efficiency enhancement is substantially more at the low wind speed than at high wind speed. This would be very beneficial to increase the annual power output or capacity factor as wind turbines work at the speeds lower than the rated speed for most of the time. The results show that the flow field around the blade surface presents a significant enhanced suction peak near the blade leading edge, which results in a very high tangential force and thus increased wind turbine net power coefficient. Consistent with the previous study for the small NREL Phase VI research wind turbine, this paper demonstrates that CFJ 2-bladed wind turbine is an effective technology to extract more power from the wind at all speeds. This study is just an initial effort to demonstrate the advantage of the CFJ blade with no design optimization. It is believed that there is more potential to further enhance the efficiency improvement.

active flow control↗
DOE OSTI2021

Investigating the Effects of Chemical Mechanism on Soot Formation Under High-Pressure Fuel Pyrolysis

We performed Computational Fluid Dynamics (CFD) simulations using a Reynolds-Averaged Navier-Stokes (RANS) turbulence model of high-pressure spray pyrolysis with a detailed chemical kinetic mechanism encompassing pyrolysis of n-dodecane and formation of polycyclic aromatic hydrocarbons. We compare the results using the detailed mechanism and those found using several different reduced chemical mechanisms to experiments carried out in an optically accessible, high-pressure, constant-volume combustion chamber. Three different soot models implemented in the CONVERGE CFD software are used: an empirical soot model, a method of moments, and a discrete sectional method. There is a large variation in the prediction of the soot between different combinations of chemical mechanisms and soot model. Furthermore, the amount of soot produced from all models is substantially less than experimental measurements. All of this indicates that there is still substantial work that needs to be done to arrive at simulations that can be relied on to accurately predict soot formation.

02 PETROLEUM↗
DOE OSTI2024

Three-Dimensional Aerodynamics and Vortex-Shedding Characteristics of Wind Turbine Airfoils over 360-Degree Angles of Attack

In this work, we present the first three-dimensional (3D) computational investigation of wind turbine airfoils over 360° angles of attack to predict unsteady aerodynamic loads and vortex-shedding characteristics. To this end, static–airfoil simulations are performed for the FFA-W3 airfoil family at a Reynolds number of 107 with the Improved Delayed Detached Eddy Simulation turbulence model. Aerodynamic forces reveal that the onset of boundary-layer instabilities and flow separation does not necessarily coincide with the onset of stall. In addition, a comparison with two-dimensional simulation data and flat plate theory extension of airfoil polars, suggest that, in the deep stall regime, 3D effects remain critical for predicting both the unsteady loads and the vortex-shedding dynamics. For all airfoils, the vortex-shedding frequencies are found to be inversely proportional to the wake width. In the case of slender airfoils, the frequencies are nearly independent of the airfoil thickness, and their corresponding Strouhal number St is approximately 0.15. Based on the calculated St, the potential for shedding frequencies to coincide with the natural frequencies of the International Energy Agency 15 MW reference wind turbine blades is investigated. The analysis shows that vortex-induced vibrations occur primarily at angles of attack of around ±90° for all airfoils.

17 WIND ENERGY↗
DOE OSTI2025

High y + Shear-Stress Turbulence Implementation for High Flux Isotope Reactor Narrow Channel Flows

The research objective of this work was to improve the engineering predictions of the turbulence characteristics of flows in curved narrow channels. Such channel flows are commonly encountered in nuclear research and test reactors, with one of them being the high-flux isotope reactor (HFIR). Research reactors bear high heat fluxes, and the proper computing of turbulence is paramount for safe and reliable reactor operation. The study builds on the results of a previous direct numerical simulation of turbulence to inform a well-known Reynolds-averaged Navier–Stokes shear-stress turbulence model and improves its accuracy in simulating parallel channel flows. A new formulation of the loss term in the dissipation conservation equation is suggested. Combined with high wall distance computational grids, the new implementation provides a fast-running flow solution, suitable for engineering purposes. Model generalization for parallel channel flows, in a broader range of frictional Reynolds numbers, is suggested by introducing a new form of the model constants.

CFD↗
DOE OSTI2024

Planck Dust Polarization Power Spectra Are Consistent with Strongly Supersonic Turbulence

Abstract The polarization of the cosmic microwave background is rich in information but obscured by foreground emission from the Milky Way’s interstellar medium (ISM). To uncover relationships between the underlying turbulent ISM and the foreground power spectra, we simulated a suite of driven, magnetized, turbulent models of the ISM, varying the fluid properties via the sonic Mach number, M S , and magnetic (Alfvén) Mach number, M A . We measure the power spectra of density ( ρ ), velocity ( v ), magnetic field ( H ), total projected intensity ( T ), parity-even polarization ( E ), and parity-odd polarization ( B ). We find that the slopes of all six quantities increase with M S . Most increase with M A , while the magnetic field spectrum steepens with M A . By comparing spectral slopes of E and B to those measured by Planck, we infer typical values of M S and M A for the ISM. As the fluid velocity increases, M S > 4 , the ratio of BB power to EE power increases to approach a constant value near the Planck-observed value of ∼0.5, regardless of the magnetic field strength. We also examine correlation coefficients between projected quantities, and find that r TE ≈ 0.3, in agreement with Planck, for appropriate combinations of M S and M A . Finally, we consider parity-violating correlations r TB and r EB .

Astronomy & Astrophysics↗
DOE OSTI2020

Decreasing wind speed extrapolation error via domain-specific feature extraction and selection

Abstract. Model uncertainty is a significant challenge in the wind energy industry and can lead to mischaracterization of millions of dollars' worth of wind resources. Machine learning methods, notably deep artificial neural networks (ANNs), are capable of modeling turbulent and chaotic systems and offer a promising tool to produce high-accuracy wind speed forecasts and extrapolations. This paper uses data collected by profiling Doppler lidars over three field campaigns to investigate the efficacy of using ANNs for wind speed vertical extrapolation in a variety of terrains, and it quantifies the role of domain knowledge in ANN extrapolation accuracy. A series of 11 meteorological parameters (features) are used as ANN inputs, and the resulting output accuracy is compared with that of both standard log-law and power-law extrapolations. It is found that extracted nondimensional inputs, namely turbulence intensity, current wind speed, and previous wind speed, are the features that most reliably improve the ANN's accuracy, providing up to a 65 % and 52 % increase in extrapolation accuracy over log-law and power-law predictions, respectively. The volume of input data is also deemed important for achieving robust results. One test case is analyzed in depth using dimensional and nondimensional features, showing that the feature nondimensionalization drastically improves network accuracy and robustness for sparsely sampled atmospheric cases.

17 WIND ENERGY↗
DOE OSTI2021

Helicon full-wave modeling with scrape-off-layer turbulence on the DIII-D tokamak

Helicon waves have been recently proposed as an off-axis current drive actuator due to their expected high current drive efficiency in the mid-radius region in high beta tokamaks. This paper focuses on a numerical study to better understand effects of scrape-off-layer (SOL) turbulence on helicon wave propagation and absorption on the DIII-D tokamak using a recently developed helicon full-wave model with turbulent density inputs from synthetic single wavelength SOL turbulence and first-principles HERMES multi-wavelength turbulence models. With both input turbulence models, three key effects are observed: the helicon wave can scatter to undesirable locations in the plasma, large helicon wave electric fields can form in localized regions near the SOL turbulence, and the helicon wave can mode convert to slow waves in the SOL. This is shown to cause helicon wave refraction to undesirable locations and strong helicon wave absorption in the SOL resulting in significantly less helicon wave power in the core plasma. Using synthetic SOL turbulence, the simulations additionally show that high amplitudes and long wavelengths greater than a few cm on average have the largest effect on modifying the helicon wave propagation and absorption; the modeling predicts, for example, that approximately 60% of helicon power can be absorbed in the SOL for $\tilde{n}$ /n ~ 0.8 and lambda_perp ~ 0.05 m. Here, several potential physical mechanisms that may explain the interaction of helicon waves with SOL turbulence in these simulations are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

An approximate inertial manifold (AIM) based closure for turbulent flows

A closure model for turbulent flows is developed based on a dynamical system theory. An appropriately discretized formulation of the governing equations is considered for this process. The key ingredient is an approximation of the system’s attractor, where all the trajectories in phase space are confined. This approximate inertial manifold based approach provides a path to track trajectories of the system in a lower-dimensional subspace. Unlike conventional coarse-graining approaches, the turbulent field is decomposed into resolved and unresolved dynamics using the properties of the governing equations. The novelty of the approach relies on the reconstruction of the unresolved field constrained by the governing equations. A posteriori tests for homogeneous isotropic turbulence and the Kuramoto–Sivashinsky equation show promising results for considerable dimension reduction with strong convergence properties. The proposed model outperforms the dynamic Smagorinsky model, and the computational overhead is competitive with similar approaches.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Isotope effects on energy transport in the core of ASDEX-Upgrade tokamak plasmas: Turbulence measurements and model validation

Design and operation of future tokamak fusion reactors using a deuterium–tritium 50:50 mix requires a solid understanding of how energy confinement properties change with ion mass. This study looks at how turbulence and energy transport change in L-mode plasmas in the ASDEX Upgrade tokamak when changing ion species between hydrogen and deuterium. For this purpose, both experimental turbulence measurements and modeling are employed. Local measurements of ion-scale (with wavevector of fluctuations perpendicular to the B-field k⊥< 2 cm−1, k⊥ρs< 0.2, where ρs is the ion sound Larmor radius using the deuterium ion mass) electron temperature fluctuations have been performed in the outer core (normalized toroidal flux ρTor=0.65−0.8) using a multi-channel correlation electron cyclotron emission diagnostic. Lower root mean square perpendicular fluctuation amplitudes and radial correlation lengths have been measured in hydrogen vs deuterium. Measurements of the cross-phase angle between a normal-incidence reflectometer and an ECE signal were made to infer the cross-phase angle between density and temperature fluctuations. The magnitude of the cross-phase angle was found larger (more out-of-phase) in hydrogen than in deuterium. TRANSP power balance simulations show a larger ion heat flux in hydrogen where the electron-ion heat exchange term is found to play an important role. These experimental observations were used as the basis of a validation study of both quasilinear gyrofluid trapped gyro-Landau fluid-SAT2 and nonlinear gyrokinetic GENE codes. Linear solvers indicate that, at long wavelengths (k⊥ρs<1), energy transport in the deuterium discharge is dominated by a mixed ion-temperature-gradient (ITG) and trapped-electron mode turbulence while in hydrogen transport is exclusively and more strongly driven by ITG turbulence. The Ricci validation metric has been used to quantify the agreement between experiments and simulations taking into account both experimental and simulation uncertainties as well as four different observables across different levels of the primacy hierarchy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

A Model Intercomparison Study of Aerosol‐Cloud‐Turbulence Interactions in a Cloud Chamber: 1. Model Results

This study presents the first model intercomparison of aerosol‐cloud‐turbulence interactions in a controlled cloudy Rayleigh‐Bénard Convection chamber environment, utilizing the Pi Chamber at Michigan Technological University. We analyzed simulated cloud chamber‐averaged statistics of microphysics and thermodynamics in a warm‐phase, cloudy environment under steady‐state conditions at varying aerosol injection rates. Simulation results from seven distinct models (DNS, LES, and a 1D turbulence model) were compared. Our findings demonstrate that while all models qualitatively capture observed trends in droplet number concentration, mean radius, and droplet size distributions at both high and low aerosol injection rates, significant quantitative differences were observed. Notably, droplet number concentrations varied by over two orders of magnitude between models for the same injection rates, indicating sensitivities to the model treatments in droplet activation and removal and wall fluxes. Furthermore, inconsistencies in vertical relative humidity profiles and in achieving steady‐state liquid water content suggest the need for further investigation into the mechanisms driving these variations. Despite these discrepancies, the models generally reproduced consistent power‐law relationships between the microphysical variables. This model intercomparison underscores the importance of controlled cloud chamber experiments for validating and improving cloud microphysical parameterizations. Recommendations for future modeling studies are also highlighted, including constraining wall conditions and processes, investigating droplet/aerosol removal (including sidewall losses), and conducting simplified experiments to isolate specific processes contributing to model divergence and reduce model uncertainties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Challenge Problem 1: Preliminary Model Development and Assessment of Flexible Heat Transfer Modeling Approaches

This report presents the modeling progress of a university consortium studying flexible modeling for turbulent heat transfer. In the context of advanced nuclear reactor design, where challenges include non-unity Prandtl fluids, free and mixed convection, and transitional flow, computational fluid dynamics methods are underutilized due to low confidence in modeling approaches and high computational cost. This report evaluates the performance of engineering CFD models in diabatic, buoyant turbulent flow. It finds that all turbulence models including several variants of the k-ε and k-ω models struggle to predict accurate turbulent momentum and heat transfer in such flows. The Nusselt numbers have been compared between the models and the DNS data, where calculations have been performed for each case and trends have shown a good agreement between DNS estimated Nusselt numbers and available correlations as well as experimental data. A novel DNS correlation for high Pr cases as they are transitioning from mixed convection to natural convection has been proposed. While Nusselt number errors relative to DNS range from 20% to 50%, the models capture similar trends to DNS with respect to Nusselt suppression and amplification under varying levels of buoyancy effect. This report also highlights model form error as a significant contributor to CFD predictions and proposes a framework for quantifying model error and improving confidence in CFD calculations. To improve the predictive capability of engineering CFD models, data-driven approaches for turbulence models are investigated. Theoretical frameworks based on the invariant tensor / vector basis neural networks for prediction of Reynolds stresses and turbulent heat fluxes are employed. The models are developed using direct numerical simulations data for forced convection flows of different fluids in vertical planar channel domain. The framework is implemented in spectral element solvers Nek5000 / nekRS and has shown a potential for future development and consideration of mixed convection flows.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

A quasi-linear model of electromagnetic turbulent transport and its application to flux-driven transport predictions for STEP

A quasi-linear reduced transport model is developed from a database of high-β electromagnetic nonlinear gyrokinetic simulations performed with spherical tokamak for energy production (STEP) relevant parameters. The quasi-linear model is fully electromagnetic and accounts for the effect of equilibrium flow shear using a novel approach. Its flux predictions are shown to agree quantitatively with predictions from local nonlinear gyrokinetic simulations across a broad range of STEP-relevant local equilibria. This reduced transport model is implemented in the T3D transport solver that is used to perform the first flux-driven simulations for STEP to account for transport from hybrid kinetic ballooning mode turbulence, which dominates over a wide region of the core plasma. Nonlinear gyrokinetic simulations of the final transport steady state from T3D return turbulent fluxes that are consistent with the reduced model, indicating that the quasi-linear model may also be appropriate for describing the transport steady state. Within the assumption considered here, our simulations support the existence of a transport steady state in STEP with a fusion power comparable to that in the burning flat top of the conceptual design, but do not demonstrate how this state can be accessed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Fractional Modeling in Action: A Survey of Nonlocal Models for Subsurface Transport, Turbulent Flows, and Anomalous Materials

Modeling of phenomena such as anomalous transport via fractional-order differential equations has been established as an effective alternative to partial differential equations, due to the inherent ability to describe large-scale behavior with greater efficiency than fully-resolved classical models. In this review article, we first provide a broad overview of fractional-order derivatives with a clear emphasis on the stochastic processes that underlie their use. We then survey three exemplary application areas – subsurface transport, turbulence, and anomalous materials – in which fractional-order differential equations provide accurate and predictive models. For each area, we report on the evidence of anomalous behavior that justifies the use of fractional-order models, and survey both foundational models as well as more expressive state-of-the-art models. We also propose avenues for future research, including more advanced and physically sound models, as well as tools for calibration and discovery of fractional-order models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Co-optimized machine-learned manifold models for large eddy simulation of turbulent combustion

Many modeling approaches in large eddy simulation (LES) of turbulent combustion employ a projection of the thermochemical state onto a low-dimensional manifold within state space to reduce the number of transported variables and hence computational cost. Flamelet-generated manifolds (FGM) is an example of a well-established, physics-based approach, but increasingly, principal component analysis (PCA) is being used as a data-driven method for generating manifold models. For both approaches, the nonlinear relationship between the location on the predefined manifold and the outputs of interest, such as reaction rates, can be tabulated or encoded in a neural network. This work proposes a new approach for manifold modeling that extends these existing approaches. A modified neural network structure simultaneously encodes the definition of the manifold variables, the nonlinear mapping, and the subfilter closure for LES. This allows all three of these aspects of the model to be co-optimized, generating a model from any source of combustion thermochemical state data. The manifold parameterizing variables are constrained to be linear combinations of species, as in FGM and PCA-based models, to aid in interpretability and implementation. For LES, subfilter variances of the manifold variables are also included as inputs. Two types of a priori analysis are performed to evaluate the new approach. In the first, the model is trained on data from one-dimensional premixed flames. In this case, the approach recovers the behavior of flamelet-based manifold approaches, and in fact slightly improves performance by identifying an optimized progress variable. The approach is also applied to data from direct numerical simulations of spherical ignition kernels in isotropic turbulence. For any specified manifold dimensionality, the new approach provides substantially lower prediction errors than a PCA-based model developed from the same data set. Additionally, the LES formulation of the new approach can provide accurate predictions for filtered reaction rates across a variety of filter widths.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Modelling and assessing the near-wake representation and turbulence behaviour of control-oriented wake models

Due to the interaction between the wake of an upstream turbine on a downstream turbine, power losses and increased fatigue loads occur. By yawing the upstream turbine with regard to the wind direction, one can potentially reduce the power losses of the downstream turbine and reduce the fatigue loads. The evolution of the wake depends on the pressure gradient within the near-wake region and the turbulent kinetic energy and must be incorporated in existing wake steering algorithms to provide an accurate estimation of the wake flow. This paper will show a first approach to implement a near-wake model and a turbulence model in the curled wake model within the controls-oriented framework FLORIS. The near-wake model is based on an analytical expression of the velocity profile to model the pressure gradient. Furthermore, two turbulence models are incorporated within the curled wake model based on a Gaussian-distribution and a mixing length formulation. The adapted curled wake model is then assessed with the measurement data acquired in the wind tunnel at ForWind – University of Oldenburg. The evaluation of the models show good agreement for the velocity deficit and representation of the near-wake region. Furthermore, the turbulent kinetic energy behaved as expected in comparison to other work, showing a ring of high turbulent kinetic energy at non-yawed condition which is deflected to a curled shape at large yaw angles with the turbulence model based on a mixing length formulation.

FLORIS↗
DOE OSTI2024

Developing And Scaling an OpenFOAM Model to Study Turbulent Flow in a HFIR Coolant Channel

Improving the understanding of how computational fluid dynamics (CFD) direct numerical simulations (DNS) of flows in the High Flux Isotope Reactor (HFIR) perform when run in parallel using the high performance computing (HPC) platform Summit at the Oak Ridge Leadership Computing Facility (OLCF) is of particular importance to boost the computational tools used to support HFIR conversion to low enriched fuel (LEU). Evaluation of scaling performance was driven by the increasing importance of graphics processing unit (GPU) usage in HPC, which is becoming the standard for modern supercomputers such as Summit. The desired results are to obtain a strong positive correlation between the computational resources dedicated to a problem and the relative speed-up of the simulation in comparison to a benchmark. This capability will allow substantially improvement in HFIR flow analytical capabilities, specifically when predicting turbulence properties at high Reynolds numbers. The study leverages previous simulation results performed with code PHASTA (finite element) on HPC platforms Cori (NERSC) and Theta (ALCF) [1] with computing options provided in the computing platform OpenFOAM (finite volume) at OLCF. Transitioning from PHASTA to OpenFOAM will (1) eliminate dependence on third-party software for mesh generation and manipulation, (2) reduce resource needs by employing modern architectures, and (3) build expertise for future modeling of HFIR-specific problems like heat transfer in involute geometry, entrance effects, flow structure in channel corners, and so on—all important issues when defining the available thermal margins in the transition to LEU. CPUs and GPUs differ significantly in their architecture and utilization, as discussed in the literature [2]. The most important differences are in the approach to computations and their memory. A single GPU contains a large quantity of cores, enabling it to perform with a much higher throughput than a CPU, but execution requires a different approach. GPU codes execute instructions using the Single-Instruction Multiple-Thread (SIMT) approach in which a single instruction is used for groups of threads called warps. A warp typically consists of 32 threads which must execute the same set of instructions, although on separate threads. Alternately, a CPU has far fewer cores that are much more flexible in their operation, excelling at quickly performing more complex serial computations. This is why GPUs have greater throughput when properly utilized. The second important difference is seen when comparing their memory spaces. Limited memory allocations and CPU–GPU communications cause a significant bottleneck in GPU-accelerated programs. Further study was required to properly take advantage of GPU resources. A comprehensive analysis of code performance and the model-specific features of turbulence constitutes the core of this work. In this study, a DNS simulation of HFIR channel turbulence was performed with the finite volume CFD code OpenFOAM v2112 and CUDA v11.0 on Red Hat Enterprise Linux v8.2. The OpenFOAM installation had AMGx integrated to enable GPU acceleration and utilizes the PETSc4FOAM library. The computational resources and the problem size were scaled on CPU and CPU + GPU architectures to gain a better understanding of the performance of a DNS problem on modern computing hardware. The study aimed to analyze the scaling of the code exclusively on CPUs and then to examine the scaling of the codes with GPU acceleration enabled. Scaling studies included CPU and GPU acceleration on a mesh of varying resolution to analyze the impact of problem size relative to computational resources. In the course of preparing the GPU configuration on Summit, mainly using the AMGX solvers, difficulties were encountered stemming from constant changes resulting from extensive ongoing development activities and the changing environment. This resulted in the inability to complete the GPU portion of the work. The code was compiled and tested, but production runs to assess acceleration were not performed because the used discretional compute time allocation expired as year-end approached. The Summit HPC platform is scheduled for decommissioning in 2024, making it unattractive for future use with Nvidia-based GPUs. Therefore, the work will be moved onto NERSC machines in FY24. An application was prepared and submitted, and sufficient node-hours were awarded to continue the research in the next calendar year. This report summarizes work performed thus far, which mostly focused on CPU OpenFOAM computing.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Transported PDF Modeling of Compressible Turbulent Reactive Flows by using the Eulerian Monte Carlo Fields Method

Although the transported probability density function (PDF) method has been developed for decades, its application has been mainly focused on the low-Mach number flow problems. This work extends the transported PDF method to compressible flow problems. The Eulerian Monte Carlo fields (EMCF) solution method is employed to solve the transported PDF equation for compressible flow problems. A pseudo stagnation enthalpy is introduced and its stochastic partial differential equation is derived to ensure total energy conservation numerically. A new mixing model called interaction by partial exchange with mean (IPEM) is introduced to expand the available choices of mixing models for the EMCF method. The consistency of the EMCF method is examined for solving the transported PDF equation. Numerical implementation details are discussed, such as the density coupling between the compressible flow solver and the EMCF solver, discretization schemes for the mixing terms and the stochastic terms. The implemented compressible flow solver coupled with the EMCF solver is verified and validated in a series of test cases with increasing level of complexity, ranging from a statistically one-dimensional turbulent mixing layer to a self-excited resonance model rocket combustor. It is observed that in general with the increase of compressibility, there is an increase in the sensitivity of the modeling results to the different models and algorithms. This makes it necessary to develop a thorough understanding of the model sensitivity in order to develop a robust and accurate simulation solver for highly compressible turbulent reactive flows. The thermo-acoustic instability inside the model rocket combustor case is captured reasonably, which demonstrates the overall capability of the developed compressible turbulent combustion solver based on the transported PDF method.

42 ENGINEERING↗