Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transportation data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Hybrid-renewable processes for biofuels production: concentrated solar pyrolysis of biomass residues

The viability of thermochemically-derived biofuels can be greatly enhanced by reducing the process parasitic energy loads. Integrating renewable power into biofuels production is one method by which these efficiency drains can be eliminated. There are a variety of such potentially viable "hybrid-renewable" approaches; one is to integrate concentrated solar power (CSP) to power biomass-to-liquid fuels (BTL) processes. Barriers to CSP integration into BTL processes are predominantly the lack of fundamental kinetic and mass transport data to enable appropriate systems analysis and reactor design. A novel design for the reactor has been created that can allow biomass particles to be suspended in a flow gas, and be irradiated with a simulated solar flux. Pyrolysis conditions were investigated and a comparison between solar and non-solar biomass pyrolysis was conducted in terms of product distributions and pyrolysis oil quality. A novel method was developed to analyse pyrolysis products, and investigate their stability.

09 BIOMASS FUELS↗

Diffusivities of Ag, Cs, Sr, and Kr in TRISO fuel particles and graphite

Tri-structural isotropic (TRISO) coated particles have been developed and studied since the late 1950s when the concept of coated particles was invented by Roy Huddle of the United Kingdom Atomic Energy Authority. Several decades of work by half a dozen countries on fission product transport in TRISO fuel through numerous irradiation and heating experiments have led to several recommendations of transport data and to the adoption of various sets of diffusion coefficients. In 1997, the International Atomic Energy Agency (IAEA) gathered all these historical results and issued a technical document (TECDOC-978 [IAEA]) that summarizes these sets of recommended diffusion coefficients. Table 1 shows the reference literature articles for the diffusivities that have historically been recommended by the American and German TRISO fuel development programs and that are summarized in the IAEA report (see section 7 for full references of these articles).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Emulation Platform for Cyber Analysis of Wireless Communication Network Protocols

Wireless networking and mobile communications is increasing around the world and in all sectors of our lives. With increasing use, the density and complexity of the systems increase with more base stations and advanced protocols to enable higher data throughputs. The security of data transported over wireless networks must also evolve with the advances in technologies enabling more capable wireless networks. However, means for analysis of the effectiveness of security approaches and implementations used on wireless networks are lacking. More specifically a capability to analyze the lower-layer protocols (i.e., Link and Physical layers) is a major challenge. An analysis approach that incorporates protocol implementations without the need for RF emissions is necessary. In this research paper several emulation tools and custom extensions that enable an analysis platform to perform cyber security analysis of lower layer wireless networks is presented. A use case of a published exploit in the 802.11 (i.e., WiFi) protocol family is provided to demonstrate the effectiveness of the described emulation platform.

97 MATHEMATICS AND COMPUTING↗

Evolution of Pore Structure and Permeability of Rocks Under Hydrothermal Conditions (Final Report)

The physical and transport properties of porous rocks can be altered by a variety of diagenetic, metamorphic, and tectonic processes, and the changes that result are of critical importance to such industrial applications as resource recovery, carbon dioxide sequestration, and waste isolation in geologic formations. The associated interrelationships between rocks, pore fluids and deformation are also key to understanding many natural processes, including dynamic metamorphism, fault mechanics, fault stability and pressure solution creep. In this project, we investigated the changes of permeability and pore geometry owing to inelastic deformation by solution-transfer, brittle fracturing and dislocation creep. In particular, we studied the coupling between pore fluids and deformation in fluid-filled quartz, calcite, mudstones and ultramafic rocks and examine the effects of coupled mechanical and chemical processes on the evolution of porosity and permeability under hydrothermal conditions. The investigations used a combination of techniques, that included triaxial laboratory experiments; uniaxial compressive loading with in situ observations of microstructure; permeability under hydrostatic compression; observations of microstructure using optical and electron microscopes, and micro-CT imaging; and numerical calculations. Laboratory experiments were designed to provide mechanical and transport data under conditions that isolate the particular mechanisms responsible for the changes. The data obtained were used to quantify changes in surface roughness, porosity, pore dimensions and their spatial fluctuations. The results of the experiments and data from image analyses were compared to the results of network, finite-difference and other numerical models to verify the validity of experimentally established relations between permeability and other rock properties. A bibliography for the period from 2015-2019 is appended below. New results obtained in the final year and the unfunded extension period are detailed below.

58 GEOSCIENCES↗

Innovative Utility Offerings at the Distribution Edge: Case Studies from Around the Globe

The global evolution of the electricity sector - from deregulation, to higher penetrations of DERs, to digitization and changing consumer preferences - has delivered the utility industry to an inflection point. The vertically integrated, regulated model that persisted over most of the 20th century is undergoing a transformation, and utilities worldwide are responding with new approaches to the provision of products and services. This report catalogs several of these innovative approaches to incorporate new technologies such as electric vehicles, meet societal goals for a cleaner, more efficient electricity system, and empower consumers to make smarter energy choices and provide system benefits. The report comprises a series of 10 case studies across six continents, and features solutions touching on energy supply, energy efficiency, lighting, transport, data, heating and cooling, and rural/off-grid solutions. The diversity of products, programs, and markets documented illustrates the extent of the shift underway. Ultimately, the report demonstrates that utilities will continue to serve as critical partners in a global energy transition, and have been actively engaged in securing their position as such.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Artificial Graphene in Undoped Semiconductor Heterostructures

The linear energy-momentum dispersion which arises from graphene’s underlying honeycomb lattice gives graphene its unique electronic properties unfound in conventional semiconductors. Theoretically speaking, when an electrostatic potential with hexagonal or honeycomb symmetry is imposed onto a two-dimensional electron/hole system, the band structure is modified in a way that the same linear energy-momentum dispersion could exist. Experimentally, there has not been any evidence from transport demonstrating the so-called “artificial graphene”. In this project, we attempt to create an artificial superlattice potential with hexagonal symmetry for two dimensional carriers in an undoped SiGe heterostructure by patterning a nanoscale hole array in a metallic gate. Using undoped heterostructures allows us to access a very wide density range, which covers the magic densities at which the Dirac points are expected. A process flow for fabricating such field-effect-transistor devices with a lattice constant as small as 90 nm is reported. Magneto-transport measurements performed at 0.3 K show that the superlattice potential in the quantum well in which the two-dimensional system resides is indeed modulated by the gates. However, no signature of the sought-after linear dispersion is observed in the transport data.

36 MATERIALS SCIENCE↗

Micro-Transfer Printing of Repeaters on Passive Interposer

Silicon-based sensors are central to particle physics experiments and particle tracking detectors. New-generation Large Focal Plane Arrays (LFPAs) cover areas that extend beyond several square meters. Distributing power and transporting data across such areas while maintaining good signal integrity is a complicated challenge. Tiling the detector on an organic interposer would be far too expensive and take too much space while offering little to no advantage regarding signal integrity. Passive silicon interposers are much less expensive and more integrable but would worsen signal integrity because of their inherent higher dielectric constant. Active interposers are a good compromise from the economic and signal integrity standpoint; unfortunately, their yield trends to zero for areas greater than a reticle size, making this technology incompatible with our application. NHanced proposes to duplicate the behavior of a high-yield, low-cost active interposer by printing active microcomponents on a passive interposer with our die-to-wafer micro-transfer printing (MTP) technology. This resolves the signal integrity and power distribution limitations. In Phase I, we designed and simulated analog and digital repeaters to be MTPed onto a passive silicon interposer test wafer.

2.5D↗

Magnetotransport of Sm 2 Ir 2 O 7 across the pressure-induced quantum-critical phase boundary

Rare-earth pyrochlore iridates host two interlocking magnetic sublattices of corner-sharing tetrahedra and can harbour a unique combination of frustrated moments, exotic excitations and highly correlated electrons. They are also the first systems predicted to display both topological Weyl semimetal and axion insulator phases. We have measured the transport and magnetotransport properties of single-crystal Sm 2 Ir 2 O 7 up to and beyond the pressure-induced quantum critical point for all-in-all-out (AIAO) Ir order at $p_c$ = 63 kbar previously identified by resonant X-ray scattering and close to which Weyl semimetallic behavior has been previously predicted. Our findings overturn the accepted expectation that the suppression of AIAO order should lead to metallic conduction persisting down to zero temperature. Instead, the resistivity-minimum temperature, which tracks the decrease in the AIAO ordering temperature for pressures up to 30 kbar, begins to increase under further application of pressure, pointing to the presence of a second as-yet unidentified mechanism leading to non-metallic behavior. The magnetotransport does track the suppression of Ir magnetism, however, with a strong hysteresis observed only within the AIAO phase boundary, similar to that found for Ho 2 Ir 2 O 7 and attributed to plastic deformation of Ir domains. Around $p_c$ we find the emergence of a new type of electronic phase, characterized by a negative magnetoresistance with small hysteresis at the lowest temperatures, and hysteresis-free positive magnetoresistance above approximately 5 K. The temperature dependence of our low-temperature transport data are found to be best described by a model consistent with a Weyl semimetal across the entire pressure range.

36 MATERIALS SCIENCE↗

Analysis Program 2022 Annual Progress Report

The VTO Analysis Program supports mission-critical technological, economic, and interdisciplinary analyses to assist in prioritizing VTO technology investments and to inform research portfolio planning. These efforts provide essential vehicle and market data, modeling and simulation, and integrated and applied analyses, using the unique capabilities, analytical tools, and expertise resident in the DOE’s national laboratory system. VTO Analysis projects also demonstrate additional capabilities and expertise provided by research partnerships that may include academia, the private sector, and non-profit organizations.

33 ADVANCED PROPULSION SYSTEMS↗

An Algebra of Machine Learners with Applications

Machine learning (ML) methods are increasingly being applied to solve complex, data-driven problems in diverse areas, by exploiting the physical laws derived from first principles such as thermal hydraulics and the abstract laws developed recently for data and computing infrastructures. These physical and abstract laws encapsulate, typically in compact algebraic forms, the critical knowledge that complements data-driven ML models. We present a unified perspective of these laws and ML methods using an abstract algebra (A;⊕,Ⓧ), wherein the performance estimation and classification tasks are characterized by the additive ⊕ operations, and the diagnosis, reconstruction, and optimization tasks are characterized by the difference Ⓧ operations. This abstraction provides ML codes and their performance characterizations that are transferable across different areas. We describe practical applications of these abstract operations using examples of throughput profile estimation tasks in data transport infrastructures, and power-level and sensor error estimation tasks in nuclear reactor systems.

Rao, Nageswara↗

Study of Overfitting by Machine Learning Methods Using Generalization Equations

The training error of Machine Learning (ML) methods has been extensively used for performance assessment, and its low values have been used as a main justification for complex methods such as estimator fusion and ensembles, and hyper parameter tuning. We present two practical cases where independent tests indicate that the low training error is more of a reflection of over-fitting rather than the generalization ability. We derive a generic form of the generalization equations that separates the training error terms of ML methods from their epistemic terms that correspond to approximation and learnability properties. It provides a framework to separately account for both terms to ensure an overall high generalization performance. For regression estimation tasks, we derive conditions for performance enhancements achieved by hyper parameter tuning, and fusion and ensemble methods over their constituent methods. We present experimental measurements and ML estimates that illustrate the analytical results for the throughput profile estimation of a data transport infrastructure.

Rao, Nageswara↗

Seebeck and Figure of Merit Enhancement by Rare Earth Doping in Yb14-xRExZnSb11 (x = 0.5)

Yb14ZnSb11 has been of interest for its intermediate valency and possible Kondo designation. It is one of the few transition metal compounds of the Ca14AlSb11 structure type that show metallic behavior. While the solid solution of Yb14Mn1-xZnxSb11 shows an improvement in the high temperature figure of merit of about 10% over Yb14MnSb11, there has been no investigation of optimization of the Zn containing phase. In an effort to expand the possible high temperature p-type thermoelectric materials with this structure type, the rare earth (RE) containing solid solution Yb14-xRExZnSb11 (RE = Y, La) was investigated. The substitution of a small amount of 3+ rare earth (RE) for Yb2+ was employed as a means of optimizing Yb14MnSb11 for use as a thermoelectric material. Yb14ZnSb11 is considered an intermediate valence Kondo system where some percentage of the Yb is formally 3+ and undergoes a reduction to 2+ at ~85 K. The substitution of a 3+ RE element could either replace the Yb3+ or add to the total amount of 3+ RE and provides changes to the electronic states. RE = Y, La were chosen as they represent the two extremes in size as substitutions for Yb: a similar and much larger size RE, respectively, compared with Yb3+. The composition x = 0.5 was chosen as that is the typical amount of RE element that can be substituted into Yb14MnSb11. These two new RE containing compositions show a significant improvement in Seebeck while decreasing thermal conductivity. The addition of RE increases the melting point of Yb14ZnSb11 so that the transport data from 300 K to 1275 K can be collected. The figure of merit is increased five times over that of Yb14ZnSb11 and provides a zT ~0.7 at 1275 K.

Kunz Wille, Elizabeth L. (ORCID:0000000228062663)↗

Modeling the complete Otto cycle: Preliminary version

A description is given of the equations and the computer program being developed to model the complete Otto cycle. The program incorporates such important features as: (1) heat transfer, (2) finite combustion rates, (3) complete chemical kinetics in the burned gas, (4) exhaust gas recirculation, and (5) manifold vacuum or supercharging. Changes in thermodynamic, kinetic and transport data as well as model parameters can be made without reprogramming. Preliminary calculations indicate that: (1) chemistry and heat transfer significantly affect composition and performance, (2) there seems to be a strong interaction among model parameters, and (3) a number of cycles must be calculated in order to obtain steady-state conditions.

Zeleznik, F. J.↗

Modeling the complete Otto cycle - Preliminary version

A description is given of the equations and the computer program being developed to model the complete Otto cycle. The program incorporates such important features as: (1) heat transfer, (2) finite combustion rates, (3) complete chemical kinetics in the burned gas, (4) exhaust gas recirculation, and (5) manifold vacuum or supercharging. Changes in thermodynamic, kinetic and transport data as well as model parameters can be made without reprogramming. Preliminary calculations indicate that: (1) chemistry and heat transfer significantly affect composition and performance, (2) there seems to be a strong interaction among model parameters, and (3) a number of cycles must be calculated in order to obtain steady-state conditions.

Zeleznik, F. J.↗

Multiprocessing tradeoffs and the wind-tunnel simulation problem

The architecture tradeoff issue is discussed, concentrating on an oversimplified version of the multiprocessing aspect. A degree of symmetric multiprocessing is unavoidable; the choice is either complete symmetric multiprocessing or a number of identical pipelines. The processing elements can be geared to do either plane-multiprocessing, or line-multiprocessing. Other important design choices are the number notation, word length, main memory size, cache memory size, and different means to implement data transport.

Chen, T. C.↗

Preliminary assessment of industrial needs for an advanced ocean technology

A quick-look review of selected ocean industries is presented for the purpose of providing NASA OSTA with an assessment of technology needs and market potential. The size and growth potential, needs and problem areas, technology presently used and its suppliers, are given for industries involved in deep ocean mining, petrochemicals ocean energy conversion. Supporting services such as ocean bottom surveying; underwater transportation, data collection, and work systems; and inspection and diving services are included. Examples of key problem areas that are amenable to advanced technology solutions are included. Major companies are listed.

Mourad, A. G.↗

Long term tests of the HEPP liquid trap diode heat pipe prototype

The test results which were obtained with the HEPP liquid trap diode heat pipe prototype after it had been in storage for almost 27 months are presented. Transport data were obtained over the range of 150 to 220 K and reverse mode shutdown was measured with nominal operation at 180 K.

Source record↗