Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Coherent Reaction between Molecular and Atomic Bose-Einstein Condensates: Integrable Model

Here, we solve a model that describes a stimulated conversion between ultracold bosonic atoms and molecules. The reaction is triggered by a linearly time-dependent transition throughout the Feshbach resonance. Our solution predicts a dependence, with a dynamic phase transition, of the reaction efficiency on the transition rate for both atoms-to-molecule pairing and molecular dissociation processes. We find that for the latter process with a linear energy dispersion of atomic modes, the emerging phase can have a thermalized energy distribution of noninteracting bosons with the temperature defined by the rate of the transition. This provides a simple interpretation of the phase transition in terms of the creation of equilibrium Bose-Einstein condensate.

74 ATOMIC AND MOLECULAR PHYSICS↗

FOAM FORMATION IN THE SALTSTONE PRODUCTION FACILITY: EVALUATION OF SOURCES AND MITIGATION

The Saltstone Production Facility receives waste from Tank 50H for treatment. Influents into Tank 50H include the Effluent Treatment Project waste concentrate, H-Canyon low activity waste and General Purpose Evaporator bottoms, Modular Caustic Side Solvent Extraction Unit decontaminated salt solution, and salt solution from the Deliquification, Dissolution and Adjust campaign. Using the Waste Characterization System (WCS), this study tracks the relative amounts of each influent into Tank 50H, as well as the total content of Tank 50H, in an attempt to identify the source of foaming observed in the Saltstone Production Facility hopper. Saltstone has been using antifoam as part of routine processing with the restart of the facility in December 2006. It was determined that the maximum admix usage in the Saltstone Production Facility, both antifoam and set retarder, corresponded with the maximum concentration of H-Canyon low activity waste in Tank 50H. This paper also evaluates archived salt solutions from Waste Acceptance Criteria analysis for propensity to foam and the antifoam dosage required to mitigate foaming. It was determined that Effluent Treatment Project contributed to the expansion factor (foam formation) and General Purpose Evaporator contributed to foaminess (persistence). It was also determined that undissolved solids contribute to foam persistence. It was shown that additions of Dow Corning Q2-1383a antifoam reduced both the expansion factor and foaminess of salt solutions. The evaluation of foaming in the grout hopper during the transition from water to salt solution indicated that higher water-to-premix ratios tended to produce increased foaming. It was also shown that additions of Dow Corning Q2-1383a antifoam reduced foam formation and persistence.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hanford Site Revegetation Monitoring Report for Fiscal Year 2022

This report describes the monitoring of areas revegetated by various contractors on the Hanford Site. Revegetation sites include those revegetated by the River Corridor Closure Contractor and CH2M Hill Plateau Remediation Company that were transitioned to Mission Support Alliance (MSA) in 2017. These sites, along with sites revegetated by MSA between 2017 and 2020, were transitioned to Hanford Mission Integration Solutions (HMIS) in 2021. HMIS performs revegetation monitoring activities for these transitioned sites and for sites revegetated by HMIS and other contractors in subsequent years to determine revegetation site success. This report contains data collected in 2022 documenting the recovery of revegetation areas associated with the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 cleanup of National Priorities List waste sites and restoration of lands disturbed by ongoing mission activities at the Hanford Site in Richland, Washington. It contains vegetation monitoring data for 53 sites selected to be representative sites for areas planted between the years of fiscal year (FY) 2007 and FY 2022.

54 ENVIRONMENTAL SCIENCES↗

Kinetic theory analysis of rarefied gas flow through finite length slots

An analytic study is made of the flow a rarefied monatomic gas through a two dimensional slot. The parameters of the problem are the ratios of downstream to upstream pressures, the Knudsen number at the high pressure end (based on slot half width) and the length to slot half width ratio. A moment method of solution is used by assuming a discontinuous distribution function consisting of four Maxwellians split equally in angular space. Numerical solutions are obtained for the resulting equations. The characteristics of the transition regime are portrayed. The solutions in the free molecule limit are systematically lower than the results obtained in that limit by more accurate numerical methods.

Raghuraman, P.↗

The formation of a standing shock in a polytropic solar wind model within 1-10 Rs

It is shown how a one-fluid polytropic solar wind model exhibits properties similar to an isothermal wind when localized momentum and/or rapid area divergence produce multiple critical points in the flow. In particular, it is shown that when the sonic transition in the flow occurs closer to the coronal base, multiple steady solutions can exist. These multiple steady solutions consist of a contiuous solution passing through the innermost critical point and other steady solutions involving a steady shock transition. By following the temporal evolution of the solar wind from a steady state with one critical point to a steady state with three critical points, it is shown that a standing shock solution is more likely to develop than a continuous solution when momentum deposition occurs close to the coronal base and the equation of motion admits multiple steady solutions. This result is particularly relevant to the solar wind when momentum deposition occurs as a result of a rapidly diverging coronal hole geometry.

Habbal, S. R.↗

Low Excess Speed Triple Cyclers of Venus, Earth, and Mars

Ballistic cycler trajectories which repeatedly encounter Earth and Mars may be invaluable to a future transportation architecture ferrying humans to and from Mars. Such trajectories which also involve at least one flyby of Venus are computed here for the first time. The so-called triple cyclers are constructed to exhibit low excess speed on Earth-Mars transit legs, and thereby reduce the cost of hyperbolic rendezvous. Numerous solutions are identified with average transit leg excess speed below 5 kilometers per second, independent of encounter epoch. The energy characteristics are lower than previously documented cyclers not involving Venus, but the repeat periods are generally longer.

Jones, Drew Ryan↗

Exact theory of intermediate phases in two dimensions

We show how field theory yields the exact description of intermediate phases in the scaling limit of two-dimensional statistical systems at a first order phase transition point. The ability of a third phase to form an intermediate wetting layer or only isolated bubbles is explicitly related to the spectrum of excitations of the field theory. The order parameter profiles are determined and interface properties such as passage probabilities and internal structure are deduced from them. The theory is illustrated through the application to the q-state Potts model and the Ashkin–Teller model. The latter is shown to provide the first exact solution of a bulk wetting transition. -- Highlights: •Phase separation with appearance of a third phase is studied exactly. •Interfacial properties are derived from field theory. •Exact solution of bulk wetting transition is provided.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tellurium Solubility in TlGaTe{sub 2} and TlInTe{sub 2} and the Electrophysical Properties of Solid Solutions

The complex methods of the physicochemical analysis are used to study TlGaTe{sub 2}–Te and TlInTe{sub 2}–Te alloys in which the tellurium solubility region up to 5.0 at % is observed. The temperature dependences of the lattice parameters and the electrical conductivity of TlGaTe{sub 2+x} and TlInTe{sub 2+x} have been studied in different crystallographic directions. The TlGaTe{sub 2+x} and TlInTe{sub 2+x} solid solutions undergo a phase transition at a temperature of 498 K. The transition nature is interpreted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen responses of ultrathin Pd films and nanowire networks with a Ti buffer layer.

We report on hydrogen responses of ultrathin films and nanowire networks of palladium on titanium buffered silicon substrates and filtration membranes, respectively. We found that in both systems signatures such as retarding responses and saturation of the resistance changes at high hydrogen concentrations associated with the transition from Pd/H solid solution to Pd hydride diminish with decreasing the thickness of the palladium layer from 7 to 2 nm. Our results not only reveal a new way to suppress the phase transition in Pd/H system but also provide an alternative approach to achieve fast and sensitive hydrogen sensors with a wide concentration detection range.

08 HYDROGEN↗

A fast Huygens sweeping method for capturing paraxial multi-color optical self-focusing in nematic liquid crystals

We propose a numerically efficient algorithm for simulating the multi-color optical self-focusing phenomena in nematic liquid crystals. The propagation of the nematicon is modeled by a parabolic wave equation coupled with a nonlinear elliptic partial differential equation governing the angle between the crystal and the direction of propagation. Numerically, the paraxial parabolic wave equation is solved by a fast Huygens sweeping method, while the nonlinear elliptic PDE is handled by the alternating direction explicit (ADE) method. The overall algorithm is shown to be numerically efficient for computing high frequency beam propagations. - Highlights: • A simple strategy can already improve the fast Huygens sweeping method for high frequency asymptotic solutions. • The Alternating Direction Explicit method can significant improve the computational efficiency. • Numerical solutions match the Fredericks transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancements to Linear Stability-Based, CFD-integrated Transition Prediction for High-Speed Flows

Combining linear stability calculations with computational fluid dynamics (CFD) simulations has great potential for the automated modeling of high-speed flows, especially when adequate information about the configuration and the disturbance environment is available. However, a significant impediment to the applicability of this technique is the lack of an efficient method to calculate the crucial amplification ratio corresponding to the onset of transition in hypersonic flows. This ratio, also known as the "transition N-factor," is dependent upon the freestream disturbance environment as well as the surface properties of the test article. In response to the need for an engineering solution to predict the transition N-factor within conventional hypersonic wind tunnels, this paper presents a data-driven correlation that expands the existing correlations from straight circular cones with a narrow range of half angles to a broader array of axisymmetric configurations. Furthermore, when tested against a chosen dataset that was not used in its calibration, the suggested correlation shows good predictive accuracy with an RMS error of only 6.9%. Although similar accuracy may also be achieved via existing correlations based on similar datasets, predictions based on the proposed correlation have the advantage of not requiring an extensive amount of configuration-specific data. Practical applications often have access to the input parameters needed for this correlation, such as the freestream disturbance intensity, Mach number, and body-based slenderness Reynolds number. Additionally, this correlation outperforms the traditional assumption of a constant N-factor, particularly for configurations with blunted nose geometries. The development of this correlation is grounded in an extensive dataset encompassing conical models with body half-angles varying between 5 degrees and 16 degrees, Mach numbers ranging from 5 to 14, and nosetip-based Reynolds numbers approaching the transition reversal limit for blunt-nosed cones.

CFD↗

Enhancements to Linear Stability-Based, CFD-integrated Transition Prediction for High-Speed Flows

Combining linear stability calculations with computational fluid dynamics (CFD) simulations has great potential for the automated modeling of high-speed flows, especially when adequate information about the configuration and the disturbance environment is available. However, a significant impediment to the applicability of this technique is the lack of an efficient method to calculate the crucial amplification ratio corresponding to the onset of transition in hypersonic flows. This ratio, also known as the "transition N-factor," is dependent upon the freestream disturbance environment as well as the surface properties of the test article. In response to the need for an engineering solution to predict the transition N-factor within conventional hypersonic wind tunnels, this paper presents a data-driven correlation that expands the existing correlations from straight circular cones with a narrow range of half angles to a broader array of axisymmetric configurations. Furthermore, when tested against a chosen dataset that was not used in its calibration, the suggested correlation shows good predictive accuracy with an RMS error of only 6.9%. Although similar accuracy may also be achieved via existing correlations based on similar datasets, predictions based on the proposed correlation have the advantage of not requiring an extensive amount of configuration-specific data. Practical applications often have access to the input parameters needed for this correlation, such as the freestream disturbance intensity, Mach number, and body-based slenderness Reynolds number. Additionally, this correlation outperforms the traditional assumption of a constant N-factor, particularly for configurations with blunted nose geometries. The development of this correlation is grounded in an extensive dataset encompassing conical models with body half-angles varying between 5 degrees and 16 degrees, Mach numbers ranging from 5 to 14, and nosetip-based Reynolds numbers approaching the transition reversal limit for blunt-nosed cones.

CFD↗

On the cubic zero-order solution of electromagnetic waves. I. Periodic slabs with lossy plasmas

Electromagnetic waves are considered for periodic structures consisting of lossy plasmonic components and dielectric host media. For the plasmonic components, not only low-loss metals but also high-loss gas plasmas are taken into consideration. For small filling fractions of the plasmonic components, the intercell interactions are kept to a minimum. In this way, the zero-order solution to the dispersion relation is solved by focusing on its cubic nonlinearity in frequency. Analysis shows that there are two types of solutions: propagating waves and stationary states, depending on the magnitudes of the temporal attenuation rates. Depending on the relative strengths of the material loss of the plasmonic component and its filling fraction, several key critical parameters for the transitions between these two solution types are thus identified. In the following companion paper of Paper II, the cubic nonlinearities in frequency of the dispersion relations stem from different origins. Notwithstanding, they lead to strikingly similar features such as the transitions in wave types and Hopf bifurcations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the structural and magnetic phase-transitions and multiferroic properties in BiFeO3-Ba0.95Ca0.05TiO3 solid solutions

Highlights: • The detailed structural analysis has been done for (1-x) BiFeO{sub 3}-xBa{sub 0.95}Ca{sub 0.05}TiO{sub 3} (0.1 ≤ x ≤ 0.9). • The detailed magnetic behavior has been studied for (1-x) BiFeO{sub 3}-xBa{sub 0.95}Ca{sub 0.05}TiO{sub 3} (0.1 ≤ x ≤ 0.9). • The dielectric constant (ε') and the dielectric loss (ε'') versus frequency curves have been fitted by using Cole-Cole dispersion formula and non-Debye relaxation behavior has been found. • The weak magnetodielectric response (MD) has been found. • The non saturating P-E loops have been found for 0.7 ≤ x ≤ 0.9 samples. - Abstract: We synthesized (1-x) BiFeO{sub 3}-x Ba{sub 0.95}Ca{sub 0.05}TiO{sub 3} solid solutions for 0.1 ≤ x ≤ 0.9, using a solid-state-reaction. The XRD analysis reveals that a composition-driven rhombohedral-to-cubic and a cubic-to-tetragonal phase-transition occur at x ≈ 0.4 and x ≈ 0.7, respectively. The experiments show that BaCaTiO{sub 3}-substitution suppresses the spiral spin-structure, which leads to net magnetization. The samples have been found to exhibit magnetic order for 0.1 ≤ x ≤ 0.7 and paramagnetic behavior for x ≥ 0.8. The electrical conductivity increases with increasing frequency of the applied electric field. The dielectric measurements suggest a non-Debye type relaxation. The samples show magneto-dielectric response (MD) upto x = 0.5, with the highest MD of 11.61% at 10 kHz for x = 0.3. The maximum attainable remanent polarization (P{sub r}) ∼ 5.24 μC/cm{sup 2} was observed for x = 0.7.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transitions and the piezoelectricity around morphotropic phase boundary in Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-x(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} lead-free solid solution

In this paper, two displacive phase transitions around the morphotropic phase boundary (MPB) in Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-x(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} (BZT-xBCT) ceramics were detected by inspecting two anomalies of the Raman Ti{sup 4+}-O{sup 2−} longitudinal optical mode (∼725 cm{sup −1}). Further, permittivity and X-ray diffraction results demonstrated these two phase transitions originate from tetragonal (T) to rhombohedral (R) through an intermediate orthorhombic (O) phase. Importantly, we found that the maximum piezoelectric response (d{sub 33} = 545pC/N) was achieved at the boundary between the T and O phase, indicating that the giant piezoelectricity of BZT-xBCT may mainly stem from the T-O phase boundary due to easier polarization rotation and larger lattice softening.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Inclusion Precipitation, Partition Coefficient, and Phase Transition on Microsegregation for High-Sulfur Steel Solidification

A microsegregation model coupled with inclusion precipitation, variable partition coefficient, and diffusion coefficient of the solute was developed to investigate solute microsegregation for high-sulfur steel solidification. The effects of the solidification path and phase transition on solute microsegregation were explored. The results showed that the solute concentration predicted by the variable partition coefficient was quite different from the solute concentration predicted by the constant partition coefficient, and the percentage differences of solutes Si, P, and S were − 35.5, − 25.0, and 43.0 pct, respectively. For high-sulfur steel solidification, the concentrations of solutes Mn and S would be reduced by 88.3 and 74.9 pct, respectively, due to the precipitation of MnS. The solidification path and phase transition has a significant effect on the solute partition coefficient and microsegregation. With the increase in C content, the fraction of δ-phase decreased while the fraction of the γ-phase increased, and the microsegregation ratio of solutes C and Si decreased while the microsegregation ratio of solute P increased. To predict microsegregation more accurately, all influencing factors of the partition coefficient, inclusion precipitation, and phase transition should be comprehensively considered.

36 MATERIALS SCIENCE↗

Method for calculating convective heat-transfer coefficients over turbine vane surfaces

A method for calculating laminar, transitional, and turbulent convective heat-transfer coefficients for turbine vane surfaces is described. An approximate integral solution method produced results in good agreement with a finite-difference solution. Comparisons between the two are presented. The integral solution results agreed well with the finite-difference solution results in the laminar and turbulent regions. Differences in calculating the start of transition produced a later starting point for the approximate integral solution's transitional flow regime.

Gauntner, D. J.↗

Structural investigation of K{sub x}Ba{sub 1-x}Ga{sub 2-x}Ge{sub 2+x}O{sub 8} solid solutions using the X-ray Rietveld method

The K{sub x}Ba{sub 1-x}Ga{sub 2-x}Ge{sub 2+x}O{sub 8} (x=0.6-1.0) solid solutions undergo a structural phase transition that has a significant effect on their sintering behavior and their microwave dielectric properties. The crystal structures of both phases within the solid-solution region were determined by the Rietveld method using powder X-ray diffraction data. We found that the low-temperature-stable phase is isostructural with the pseudo-orthorhombic KGaGe{sub 3}O{sub 8} (space group P2{sub 1}/a), while the high-temperature-stable phase has a typical monoclinic feldspar structure (space group C2/m). Due to the topological differences between the two structures, the T-O bonds within the tetrahedra must be partially recombined to make a new framework, which causes an endothermic effect during the P2{sub 1}/a to C2/m phase transition. The correlation between the crystal structures, the microwave dielectric properties and the phase-transition behaviors were discussed in terms of the crystallographic features, the lattice parameters, and the strain-induced anisotropic peak-broadening. - Graphical abstract: The K{sub x}Ba{sub 1-x}Ga{sub 2-x}Ge{sub 2+x}O{sub 8} (x=0.6-1.0) solid solutions undergo a structural phase transition. The crystal structures of both phases within the solid-solution region were determined by the Rietveld method using powder X-ray diffraction data. The topological analogy between the two structures is seen by comparing the (001) projections of the low phase structure (left) and the (201-bar) projection of the high phase structure (right).

36 MATERIALS SCIENCE↗