R&D on MgB 2 at LANL for Applications to Superconducting RF Cavities [Slides]
After an introduction, a brief history of research on MgB 2 is provided followed by recent activities and results.
36 MATERIALS SCIENCE↗
SEARCH · Engineering Papers
Results for “Technology and Operations”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Tests and Field Mapping of RODM01 Septum Magnet
RODM01 is a septum magnet located in the extraction region of LANSCE Proton Storage Ring. Tests and field mapping of RODM01 Set #2 were performed on 02/04/2020 by members of AOT-MDE, AOT-RFE and AOT-AE Groups. Setups of test and mapping are presented. Magnetic field measurements was performed using Hall probe. Results of measurements are almost identical to that of RODM01 Set #1 performed in July 2018. Trim coil current of magnet selected to be as - 9.28 A.
43 PARTICLE ACCELERATORS↗
Target Optimization Study: Tolerance Sensitivity
A Work Package was initiated to investigate the potential for target optimization. The current design is made up of 82 disks 0.5 mm thick spaced 0.25 mm apart for helium coolant flow. This disk thickness and gap width are a result of continual increases is beam power and hence volumetric heating rate. Thickening the disks would mean higher disk temperatures, but this would be weighed against the prospect of fewer, thicker disks and wider coolant gap spaces, and the relaxed tolerances that would result. Fabrication of the target holder would be easier and less expensive, and target assembly would also be easier.
43 PARTICLE ACCELERATORS↗
CCE Phase 3: Consequence-based Targeting
While Phase 2 was a data collection effort, Phase 3 is a targeting effort. In Phase 3, organizations systematically identify the necessary steps for adversary success - all from the adversary’s perspective. A key component to this approach is identifying the critical information needs, targets, access, and actions required for the adversary to achieve the desired effect. These Critical Needs are tied to accomplishing the HCE, such as the technical requirements for the payload (Development), or the access required to deliver a payload (Deployment).
99 GENERAL AND MISCELLANEOUS↗
CCE Phase 2: System-of-System Analysis
During Phase 1, Consequence Prioritization, the CCE Team identified High Consequence Events (HCEs) that can be accomplished through cyber means to impact critical functions, services, and processes. During Phase 2, System-of-Systems Analysis (SoS Analysis), the CCE Team will conduct a systematic review and analysis of information related to the equipment, systems, processes, operations, maintenance, testing, and procurement practices based on the HCEs identified in Phase 1.
99 GENERAL AND MISCELLANEOUS↗
CCE Phase 1: Consequence Prioritization
Idaho National Laboratory (INL) developed the Consequence-driven Cyber-informed Engineering (CCE) methodology to provide public and private organizations with steps to work collaboratively and establish a working relationship to protect critical infrastructure and other national assets. This process is a considerable undertaking, iterative in nature, and—as time and resources allow—should become a part of a company’s culture. By focusing on the impact of potentially negative Events, CCE provides a better understanding of how and why adversaries can affect critical functions and services using cyber-enabled sabotage. This document describes Phase 1 of the CCE process.
99 GENERAL AND MISCELLANEOUS↗
CCE Case Study: Baltavia Substation Power Outage
In this case study, we will examine a fictional event broadly inspired by the real power outages in Ukraine that took place in December 2015 and December 2016 - both the result of cyber-enabled sabotage. The actual events of 2015 and 2016 were well-documented - the adversaries in these attacks gained access to a few power companies’ corporate networks, pivoted to industrial control system (ICS) networks, and created widespread physical effects in the form of power outages.
24 POWER TRANSMISSION AND DISTRIBUTION↗
CCE Case Study: Baltavia Substation Power Outage
In this case study, we will examine a fictional event broadly inspired by the real power outages in Ukraine that took place in December 2015 and December 2016—both the result of cyber-enabled sabotage. The actual events of 2015 and 2016 were well-documented—the adversaries in these attacks gained access to a few power companies’ corporate networks, pivoted to industrial control system (ICS) networks, and created widespread physical effects in the form of power outages.
24 POWER TRANSMISSION AND DISTRIBUTION↗
ElectroMon Geometry Considerations: Simulations of Electron Transport to a Diamond-Based Detector
Particle-in-Cell simulations were performed to investigate the effects of electrode bias and pitch on the expected number of electrons arriving at a diamond-based detector at a set of relevant incident electron energies for electron cloud monitoring. Results of these simulations indicate that the pitch of the electrodes directly impacts the number of incident electrons based on complete opacity of the electrodes to the electrons; image charge does not play a role at any relevant electron energy. Positive bias on the incident electrodes directly increases the energy of the incident electrons, while negative bias reduces the energy and completely repels incoming electrons of energies lower than the applied bias. These results are intended to be used as input parameters for a solid-state simulation which will determine the collection efficiency of the electron-hole pairs produced within the diamond as a function of position and energy.
43 PARTICLE ACCELERATORS↗
Destructive PIE and Safety Testing of Six AGR-2 UO 2 Capsule 3 Compacts
The Advanced Gas Reactor (AGR) Fuel Development and Qualification Program’s second irradiation experiment (AGR-2) was irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) from June 2010 to October 2013 (Collin 2014). The fuel compacts in this experiment held either tristructural isotropic (TRISO)-coated spherical kernels of uranium oxide (UO2) or TRISO-coated kernels containing both uranium carbide and uranium oxide phases (UCO). There were six separately monitored and controlled capsules in the AGR-2 test train. Capsule 3 held twelve compacts containing UO2-TRISO particles fabricated by BWX Technologies Nuclear Operations Group. The AGR-2 TRISO particles were fabricated in a pilot-scale fluidized-bed chemical vapor deposition (FB-CVD) furnace with a coating chamber inner diameter of 150 mm (Phillips, Barnes, and Hunn 2010), which was a change from the first irradiation experiment (AGR-1) particles that had been coated in a lab-scale FB-CVD coating system with a chamber inner diameter of 50 mm (Lowden 2006). The TRISO particles were overcoated with resinated graphite flake at Oak Ridge National Laboratory (ORNL), and the overcoated particles were pressed into one-inch-long, half-inch-diameter cylinders (Hunn, Montgomery, and Pappano 2010). Each cylindrical compact held an average of 1,543 TRISO particles with 9.6% enriched UO2 kernels that had a nominal diameter of 500 μm (Hunn, Savage, and Silva 2012). Capsule 3 compacts were irradiated to average calculated burnups of 9.01–10.69% fissions per initial metal atom (FIMA), and the average calculated fluences of fast neutrons with energies E n > 0.18 MeV were 3.05–3.53×10 25 n/m 2 (Sterbentz 2014). The calculated time-average, volume-average Capsule 3 compact temperatures were 996–1,062°C. However, Capsule 3 compact temperatures varied several hundred degrees across each compact, and the timeaverage minimum (TA min ) and time-average maximum (TA max ) temperatures were between 889–999°C and 1,072–1,105°C, respectively (Hawkes 2014). After irradiation, the AGR-2 test train was transferred from ATR to the INL Materials and Fuels Complex for inspection and disassembly (Ploger, Demkowicz, and Harp 2015). The initial inspection included dimensional metrology of the compacts and graphite fuel holders. Like all the AGR-2 compacts, the compacts in Capsule 3 shrank slightly during irradiation, as expected, with an average length reduction of 1.07–1.24% and an average diameter reduction of 0.13–0.41%. Post-irradiation examination (PIE) of the capsule components was completed to measure select fission products ( 90 Sr, 110m Ag, 134 Cs, 137 Cs, 144 Ce, and 154 Eu) outside the compacts (Stempien and Demkowicz 2020). This involved gamma counting of the graphite and graphoil spacers at the top and bottom of each capsule, acid leaching for radiochemical analysis of fission products on the metallic capsule components, and burn-leach analysis of the graphite holders. The total amount of 110mAg measured on the Capsule 3 components was 13% of the calculated capsule inventory. This was significantly lower than the amount of 110m Ag measured on the three UCO capsule components, which ranged from 32–70%. The lower 110m Ag release in Capsule 3 was likely due to lower peak temperatures compared with the UCO fuel capsules (Hawkes 2014). Measured inventories of the other select fission products were also lower in Capsule 3.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Electron Activity (Secondary Electron & Field Emission ) Suppression by Magnetic Field Placed on the Surface of Metals And Dielectric [Slides]
Secondary electron emission happens when the surface is exposed to an oscillating electromagnetic field. It has extremely dangerous effect when resonance condition of this oscillating field and higher SEY conditions are met. The dependence of the secondary electron on primary electron energy is shown in the figure. This multiplication effect on the number of electrons in oscillating electromagnetic field is called multipacting. The problem with multipacting exist in many scientific fields like LHC, ISS, ITER involving particle accelerator, space science and fusion research. In high intensity proton rings this multiplies electron get trapped inside the potential created by proton beam called electron cloud. In High power microwave sources, rf couplers and rf window to couple the power also hugely affected by multipacting.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Parallel Simulation of Beam Dynamics in Particle Accelerators [Slides]
Abstract not provided.
43 PARTICLE ACCELERATORS↗
Ultra Wide Bandwidth Source Utilizing the Two Stream Instability [Slides]
Abstract not provided.
43 PARTICLE ACCELERATORS↗
Tariff Setting in the District Heating Sector: Recommendations Based on International Experience
Ukraine’s district heating (DH) system is an essential resource for the country and has the potential to provide efficient, local, and renewable energy to a large share of the population. However, inefficient regulation and management have caused the sector to experience a vicious cycle of financial, operational, and technological problems. Overcoming these challenges and building a sustainable DH system requires comprehensive reforms, which could attract significant investment, improve the quality of services, and increase the efficiency of DH. One of the key elements of a comprehensive reform program should be a comprehensive reform of the tariff system. The purpose of this report is to provide analysis of European models for tariff regulation and recommendations for reforms to Ukraine’s DH tariff system. The report presents several case studies from European countries, followed by analysis of the current tariff system in Ukraine and barriers to effective regulation. Based on these findings, the report proposes actions Ukraine could take to improve the tariff regulatory system and promote a sustainable DH sector.
29 ENERGY PLANNING, POLICY, AND ECONOMY↗
ECAR-3873 Acceptance of Nonconforming Fuel for the AGR-5/6/7 Irradiation Experiments
Low-enriched fuel compacts fabricated for the AGR-5/6/7 irradiation experiments did not conform to all fuel specifications. Reasons why the fuel is acceptable for use in the AGR-5/6/7 irradiation are discussed. Revision 1 alters the characterization data for the dispersed uranium and exposed kernel defect fractions. Additional characterization data was obtained for fuel compacts analyzed by Oak Ridge National Laboratory. This enabled statistical outliers to be rejected and to confirm that results obtained from BWX Technologies Nuclear Operations Group were statistically independent of the Oak Ridge results and should be excluded from the analyses. Revision 2 alters the characterization data for the TRISO lot, J52R-16-98005, used in the fabrication of the AGR-5/6/7 fuel. Data from the BWXT J52R-16-98005 Certification package is used to calculate the reported values.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Window Test Stand Status and Future Work [Slides]
Challenges to getting the window test stand running that were addressed. Initial design of half-anchor connector was insufficient. Accommodation of non-Rexolite windows required engineering.
42 ENGINEERING↗