A compendium of the moon's motion and geometry, 1966 through 1985
Tabular and graphical data geometry and dynamics of earth-moon-sun system for 1966-1985 time period
Cappellari, J. O., Jr.↗
SEARCH · Engineering Papers
Results for “Tabular data”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Calculations of Chandrasekhar's X and Y functions and their analogs for noncoherent isotropic scattering
Tabular and graphical data on calculations of Chandrasekhars X and Y functions and analogs for noncoherent isotropic scattering
Fuller, F. B.↗
Iowa catalog of solar X-ray flux - 2-12 A
Solar X-ray flux from Explorer 33 and 35 observations, presenting catalog of tabular and graphical data
Drake, J. F., Sr.↗
Determination of design allowable properties. Fracture of 2219-T87 aluminum alloy
A literature survey was conducted to provide a comprehensive report of available valid data on tensile properties, fracture toughness, fatigue crack propagation, and sustained load behavior of 2219-T87 aluminum alloy base metal and weldments, as applicable to manned spacecraft tankage. Most of the data found were from tests conducted at room temperature, -320 F and -423 F. Data are presented in graphical and tabular form, and areas in which data are lacking are established.
Engstrom, W. L.↗
A theory for predicting composite laminate warpage resulting from fabrication
Linear laminate theory is used with the moment-curvature relationship to derive equations for predicting end deflections due to warpage without solving the coupled fourth-order partial differential equations of the plate. Composite micro- and macrohyphenmechanics are used with laminate theory to assess the contribution of factors such as ply misorientation, fiber migration, and fiber and/or void volume ratio nonuniformity on the laminate warpage. Using these equations, it was found that a 1 deg error in the orientation angle of one ply was sufficient to produce warpage end deflection equal to two laminate thicknesses in a 10 inch by 10 inch laminate made from 8 ply Mod-I/epoxy. Using a sensitivity analysis on the governing parameters, it was found that a 3 deg fiber migration or a void volume ratio of three percent in some plies is sufficient to produce laminate warpage corner deflection equal to several laminate thicknesses. Tabular and graphical data are presented which can be used to identify possible errors contributing to laminate warpage and/or to obtain an a priori assessment when unavoidable errors during fabrication are anticipated.
Chamis, C. C.↗
A theory for predicting composite laminate warpage resulting from fabrication
Linear laminate theory is used in conjunction with the moment-curvature relationship to derive equations for predicting end deflections due to warpage without solving the coupled fourth-order partial differential equations of the plate. Using these equations, it is found that a 1 deg error in the orientation angle of one ply is sufficient to produce warpage end deflection equal to two laminate thicknesses in a 10 inch by 10 inch laminate made from 8-ply Mod-I/epoxy. From a sensitivity analysis on the governing parameters, it is found that a 3 deg fiber migration or a void volume ratio of three percent in some plies is sufficient to produce laminate warpage corner deflection equal to several laminate thicknesses. Tabular and graphical data are presented which can be used to identify possible errors contributing to laminate warpage and/or to obtain an a priori assessment when unavoidable errors during fabrication are anticipated.
Chamis, C. C.↗
A study of alteration associated with uranium occurrences in sandstone and its detection by remote sensing methods, volume 2
This document contains tabular and graphic data for volume 1.
Conel, J. E.↗
Impetus of composite mechanics on test methods for fiber composites
Significant contributions of the three major areas of composite mechanics to the development of test methods are illustrated with selected examples. The areas of composite mechanics include composite micromechanics, composite macromechanics, and laminate theory. The examples can be considered to be representative of the contribution of composite mechanics to the development of composite test methods. The specific examples describe contributions such as criteria for selecting resin matrices for improved composite strength, the 10 deg off-axis tensile test, procedures for configuring hybrids, and the concept of 'reduced bending rigidities'. The pertinent composite mechanics equations associated with each contribution are given and supplemented by tabular and/or graphical data which illustrate the significance of the contribution.
Chamis, C. C.↗
Three state-of-the-art individual electric and hybrid vehicle test reports, volume 2
Procedures used in determining the energy efficiency and economy of a gasoline-electric hybrid taxi, an electric passenger car, and an electric van are described. Tabular and graphic data show results of driving cycle and constant speed tests, energy distribution to various components, efficiency of the components, and, for the hybrid vehicle, the emissions.
Source record↗
Satellite Power Systems (SPS) concept definition study. Volume 6: In-depth element investigation
The fabrication parameters of GaAs MESFET solid-state amplifiers considering a power added conversion efficiency of at least 80% and power gains of at least 10dB were determined. Operating frequency was 2.45 GHz although 914 MHz was also considered. Basic circuit to be considered was either Class C or Class E amplification. Two modeling programs were utilized. The results of several computer calculations considering differing loads, temperatures, and efficiencies are presented. Parametric data in both tabular and plotted form are presented.
Hanley, G. M.↗
Users' guide for the tabular display report generator program (TABDIS)
The tabular display report generator (TABDIS) program is described. The program functions as a document generation tool that provides tabular displays of data stored on a data file which has been generated by a user program. The main features of the program are outlined and all necessary inputs are detailed.
Braley, D. M.↗
Laminates and reinforced metals
A selective review is presented of the state of the art of metallic laminates and fiber reinforced metals called metallic matrix laminates (MMLs). Design and analysis procedures that are used for, and typical structural components that have been made from MMLs are emphasized. Selected MMLs, constituent materials, typical material properties and fabrication procedures are briefly described, including hybrids and superhybrids. Advantages, disadvantages, and special considerations required during design, analysis, and fabrication of MMLs are examined. Tabular and graphical data are included to illustrate key aspects of MMLs. Appropriate references are cited to provide a selective bibliography of a rapidly expanding and very promising research and development field.
Chamis, C. C.↗
Higher-order flow angle corrections for three-dimensional wind tunnel wall interference
A second-order theory including camber effects in wind tunnel wall interference corrections is described. Changes in the geometrical configuration of the model tested are avoided by introducing the camber correction as an equivalent angle-of-attack correction. Tabular and graphic data are presented which indicate improved accuracy for second-order over first-order theory.
Rizk, M. H.↗
Design procedures for fiber composite structural components: Panels subjected to combined in-plane loads
Step by step procedures are described which can be used to design panels made from fiber composite angleplied laminates and subjected to combined in plane loads. The procedures are set up as a multistep sample design. Steps in the sample design procedure range from selection of the laminate configuration to the subsequent analyses required to check design requirements for: (1) displacement, (2) ply stresses, and (3) buckling. The sample design steps are supplemented with appropriate tabular and graphical data which can be used to expedite the design process.
Chamis, C. C.↗
Structural and thermal response of 30 cm diameter ion thruster optics
Tabular and graphical data are presented which are intended for use in calibrating and validating structural and thermal models of ion thruster optics. A 30 cm diameter, two electrode, mercury ion thruster was operated using two different electrode assembly designs. With no beam extraction, the transient and steady state temperature profiles and center electrode gaps were measured for three discharge powers. The data showed that the electrode mount design had little effect on the temperatures, but significantly impacted the motion of the electrode center. Equilibrium electrode gaps increased with one design and decreased with the other. Equilibrium displacements in excess of 0.5 mm and gap changes of 0.08 mm were measured at 450 W discharge power. Variations in equilibrium gaps were also found among assemblies of the same design. The presented data illustrate the necessity for high fidelity ion optics models and development of experimental techniques to allow their validation.
Macrae, G. S.↗
Structural and thermal response of 30 cm diameter ion thruster optics
This paper presents tabular and graphical data intended for use in calibrating and validating structural and thermal models of ion thruster optics. A 30-cm-diameter, two electrode, mercury ion thruster was operated using two different electrode assembly designs. With no beam extraction, the transient and steady state temperature profiles and center electrode gaps were measured for three discharge powers. The data showed that the electrode mount design had little effect on the temperatures, but significantly impacted the motion of the electrode center. Equilibrium electrode gaps increased with one design and decreased with the other. Equilibrium displacements in excess of 0.5 mm and gap changes of 0.08 mm were measured at 450 W discharge power. Variations in equilibrium gaps were also found among assemblies of the same design. The presented data illustrate the necessity for high fidelity ion optics models and development of experimental techniques to allow their validation.
Macrae, G.↗
NAIRAS Model transition to the CCMC: real-time dosimetric output and low-Earth orbit applications
NASA’s Nowcast of Atmospheric Ionizing Radiation for Aviation Safety (NAIRAS) model is areal-time, global, physics-based model originally developed to predict exposure to cosmic radiation to air travelers from both galactic and solar sources. A prototype operational NAIRAS model has provided tabular and graphical data products via its public web site for a number of years. We present the advances in the transition of NAIRAS to operations at the Community Coordinated Modeling Center (CCMC), located at NASA Goddard Space Flight Center, where global NAIRAS products are available for a real-time space weather version of the model. In addition, a runs-on-request version provides model output along user selected flight trajectories. We show the global dosimetric output from the model that are available in real-time as well as the new products developed to support commercial spaceflight missions to low-Earth orbit(LEO) and the International Space Station (ISS).
Guillaume Gronof↗
NAIRAS Ionizing Radiation Model: Extension from Atmosphere to Space
The Nowcast of Aerospace Ionizing RAdiation System (NAIRAS) model is a real-time, global, physics-based model originally developed to predict exposure from cosmic radiation to air travelers from both galactic and solar sources. A prototype operational NAIRAS model has provided tabular and graphical data products via its public web site for about ten years. A new version of the NAIRAS model has been developed that incorporates an extension of the model domain from the atmospheric ionizing radiation environment to the space radiation environment, with the addition of the trapped inner belt proton source and altitude-dependent and rigidity-dependent geomagnetic shielding of the galactic cosmic rays (GCR) and solar energetic particle (SEP) protons. New output products of differential and integral particle flux have been developed for the characterization of single-event effects (SEE), expanding the application of NAIRAS from human radiation exposure assessment to allowing end-users to quantify radiation environment risks to aviation and spacecraft microelectronic systems. The NAIRAS model has transitioned to prototype operations at the Community Coordinated Modeling Center (CCMC) where the model now operates in two modes: (1) real-time global predictions of the atmospheric radiation environment and (2) a run-on-request (RoR) service allowing the user to select a specific time period for the global dosimetric calculations, or to upload an aircraft, balloon, or spaceflight trajectory file to provide predictions of the dosimetric and particle flux quantities along the flight path. The new features of NAIRAS version 3.0 are described in this paper and example results of the new output products for low-Earth orbit (LEO), medium-Earth orbit (MEO), and free-space radiation environments are presented
Christopher J. Mertens↗