SEARCH · Engineering Papers

Results for “TEMPERATURE PROBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Broadband Fourier-Transform Optical Photothermal Infrared Spectroscopy and Imaging

Infrared (IR) spectroscopy is a powerful method for mapping chemical heterogeneity on the microscale. Synchrotron IR radiation uniquely provides a high brightness and broad bandwidth to further extend the capabilities of IR spectroscopic imaging. However, the diffraction-limited spatial resolution of IR spectroscopy is insufficient for studies requiring submicrometer spatial differentiation. Optical photothermal IR (O-PTIR) microscopy is a powerful, emerging method that overcomes the IR diffraction limit in IR hyperspectral imaging by employing a modulated IR beam and a visible probe laser beam to detect local temperature-induced modulation at the visible diffraction limit. In this work, we extend the spectral range of photothermal infrared measurements by incorporating a synchrotron IR source, demonstrating a combined synchrotron-based O-PTIR modality that enables high spatial resolution far-field chemical imaging spanning the entire mid-IR range. Both optical- and fluorescence-detected photothermal modalities were performed using a step-scan interferometer, demonstrating improved spectral range (541-4000 cm-1) when compared to optical photothermal microscopy with commercial laser sources (800-1800 cm-1 for this particular source) and improved spatial resolution, when compared to synchrotron microspectroscopy measurements. Following these initial validation studies, synchrotron Fourier-transform fluorescence-detected photothermal IR spectroscopy in combination with synchrotron microspectroscopy measurements was used to differentiate cells in mouse brain tissue sections, which requires submicron spatial resolutions beyond those accessible by IR spectroscopy alone.

Razumtcev, Aleksandr↗

DOE OSTI2021

Carrier-Specific Hot Phonon Bottleneck in CH 3 NH 3 PbI 3 Revealed by Femtosecond XUV Absorption

Femtosecond carrier cooling in the organohalide perovskite semiconductor CH 3 NH 3 PbI 3 is measured using extreme ultraviolet (XUV) and optical transient absorption spectroscopy. XUV absorption between 44 and 58 eV measures transitions from the I 4d core to the valence and conduction bands and gives distinct signals for hole and electron dynamics. The core-to-valence-band signal directly maps the photoexcited hole distribution and provides a quantitative measurement of the hole temperature. The combination of XUV and optical probes reveals that upon excitation at 400 nm, the initial hole distribution is 3.5 times hotter than the electron distribution. At an initial carrier density of 1.4 × 10 20 cm –3 both carriers are subject to a hot phonon bottleneck, but at 4.2 × 10 19 cm –3 the holes cool to less than 1000 K within 400 fs. Finally, this result places significant constraints on the use of organohalide perovskites in hot-carrier photovoltaics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Ab-initio simulations of coherent phonon-induced pumping of carriers in zirconium pentatelluride

Abstract Laser-driven coherent phonons can act as modulated strain fields and modify the adiabatic ground state topology of quantum materials. Here we use time-dependent first-principles and effective model calculations to simulate the effect of the coherent phonon induced by strong terahertz electric field on electronic carriers in the topological insulator ZrTe 5 . We show that a coherent A 1g Raman mode modulation can effectively pump carriers across the band gap, even though the phonon energy is about an order of magnitude smaller than the equilibrium band gap. We reveal the microscopic mechanism of this effect which occurs via Landau–Zener-Stückelberg tunneling of Bloch electrons in a narrow region in the Brillouin zone center where the transient energy gap closes when the system switches from strong to weak topological insulator. The quantum dynamics simulation results are in excellent agreement with recent pump-probe experiments in ZrTe 5 at low temperature.

36 MATERIALS SCIENCE↗

DOE OSTI2022

The role of B T -dependent flows on W accumulation at the edge of the confined plasma

Abstract Near-separatrix impurity accumulation between the crown and the outer midplane of tokamaks is a common feature in results from codes such as SOLPS-ITER and DIVIMP; however, experimental evidence of accumulation has only recently been obtained and is reported here. The codes find that the poloidal distribution of impurity ions in the scrape-off layer (SOL) depends primarily on toroidal field ( B T )-dependent parallel flow patterns of the background plasma and the parallel ion temperature gradient (∇ ‖ T ion ) force. Experimentally, Mach probes used in L-mode plasmas with favorable (for H-mode access) B T measure fast ( M ∼ 0.3–0.5) inner-target-directed (ITD) background plasma flows at the crown of single-null discharges. This study reports a set of DIVIMP simulations for two similar H-mode discharges from the DIII-D W metal rings campaign differing primarily in B T -direction to assess the effect that fast ITD flows have on the distribution of W ions in the SOL. It is found that for imposed ITD flows of M = 0.3, W ions that otherwise accumulate due to the ∇ ‖ T ion -force are largely flushed out. It is also found that doubling the radial diffusion coefficient from 0.3 to 0.6 m 2 s −1 prevents accumulation due to rapid cross-field transport into the far-SOL, where background plasma flows drain W ions to the divertors. Far-SOL W distributions from DIVIMP are then used to specify input to the impurity transport code 3DLIM, which is used to interpretively model collector probe (CP) deposition patterns measured in the ‘wall-SOL’. It is demonstrated that the deposition patterns are consistent with the DIVIMP predictions of near-SOL accumulation for the unfavorable- B T direction, and little/no accumulation for the favorable- B T direction. The wall-SOL CPs have thus provided the first experimental evidence, albeit indirect, of near-SOL W accumulation—finding it occurs for the unfavorable- B T direction only. For the favorable- B T direction, fast flows can largely prevent accumulation from occurring.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Multi-physics modeling of tungsten collector probe samples during the WEST C4 He campaign

Abstract We describe the results of a multi-scale, multi-physics modeling assessment of SOLPS-ITER, hPIC2, RustBCA and Xolotl, in which five single-crystal tungsten (W) samples were placed in a reciprocating collector probe and exposed to helium (He) plasma in the WEST fusion device. In our models, we considered a pure (100 %) He plasma, as well as one with oxygen (O) present (95% He 5% O) corresponding to the impurity concentration estimated during the C4 He campaign in WEST. Our SOLPS simulations approximately match experimental reciprocating Langmuir probe plasma measurements of plasma density and temperature. Using these plasma parameters as input, hPIC2 and RustBCA predict that the presence of oxygen impurities lead to a 15%–20% decrease in ion and heat fluxes to the surface, and an order of magnitude higher sputtering yields (compared with a pure He plasma). Xolotl predictions for the response of tungsten to plasma surface interactions (PSIs) agree with experimental LAMS analysis, and indicate large near-surface He concentrations, which quickly decay with depth. Our model also shows an increasing role of erosion—in removing the near-surface He—with time. Overall, slightly higher retention is predicted for tungsten exposed to a pure He plasma, with the largest differences in the near-surface gas content caused by the large oxygen-induced erosion. This highlights the important role that impurities play in PSI. Therefore, future work will focus on providing a fully self-consistent description of oxygen (and oxides, etc.) in our models, through multi-species implementation in GITR and inclusion of oxygen and tungsten oxide formation in Xolotl.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Environmental monitoring data from the 2022-2023 field experiment at Game Ridge, Missoula County, Montana, USA

This dataset contains sensor data from programmed loggers as well as handheld moisture probes, including weather data, air and soil temperature, and soil volumetric water content. Data files and data dictionary(ies) are uploaded as .csv files. The Users Guide is a .pdf file. Location data can be found in the Google Earth file GameRidge_SitePlotCoordinates.kmz.kml included here. These datasets were collected for Plant Carbohydrate Depletion, Mycorrhizal Networks, and Vulnerability to Drought: An Experimental Test in the Field. This experiment examined the interdependency between plant hydraulics and carbohydrate availability and sought to develop ways to incorporate interactions with below ground symbiotic organisms to better model and quantify forest response to drought. This environmental data was collected to provide context for the fungal community data and Pinus ponderosa physiological data.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Fiber-Optic Raman Probe for On-line EAF Slag Analysis

Here, in Electric Arc Furnace (EAF) steelmaking, the push for improved efficiency requires accurate analysis of the chemical composition of its slag system to control slag foaming, provide refractory protection, and maintain high furnace iron yield. Therefore, the ability to obtain real-time slag chemistry data would provide a useful tool to improve the control and efficiency of the process. The work reported here aims to assess the structure and chemistry of EAF slags at high temperatures using a portable fiber-optic Raman probe. As a result, the ability to relate Raman spectra peaks to chemistry and structure is demonstrated in experimental result with EAF slags at 1550°C.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

In situ saxs characterization of thermoresponsive behavior of a poly(ethylene glycol)-graft-(poly(vinyl caprolactam)-co-poly(vinyl acetate)) amphiphilic graft copolymer

In this work, we report the thermoresponsive assembly and rheology of an amphiphilic thermosensitive graft copolymer, poly(ethylene glycol)-graft-(poly(vinyl caprolactam)-co-poly(vinyl acetate)) (commercial name Soluplus ® ), which has been investigated for potential biomedical applications. It has received attention due to is ability to solubilize hydrophobic drugs and for its thickening behavior close to body temperature. Through use of the synchrotron at Brookhaven National Lab, and collaboration with the department of energy, the nanoscale structure and properties can be probed in greater detail. Soluplus ® undergoes two structural changes as temperature is increased; the first, a concentration independent change where samples become turbid at 32 °C. Increasing the temperature further causes the formation of physically associated hydrogels. This sol-gel transition is concentration dependent and occurs at 32 °C for 40 wt% samples, and increases to 42 °C for 10 wt% samples. From variable temperature SAXS characterization micelles of 20–25 nm in radius can be seen and maintain their size and packing below 32 °C. A gradual increase in the aggregation of micelles corresponding to a thickening of the material is also observed. Close to and above the gelation temperature, micelles collapse and form a physically associated 3D network. A model is proposed to explain these physical effects, where the poly(vinyl caprolactam) group transitions from the hydrophilic corona at room temperature to the hydrophobic core as temperature is increased.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Site requirements for inhibition-free CO oxidation over silica-supported bimetallic PdCu alloys

Pd catalysts are highly active for CO oxidation but suffer from inhibition by NO at low temperatures (<150 °C). We posit that incorporation of Cu into the Pd catalyst will improve low-temperature CO oxidation activity and reduce inhibition from competitive adsorbers. To probe this hypothesis, a series of PdCu alloys with different Pd : Cu ratios were synthesized and tested in the temperature-programmed oxidation of CO in the presence and absence of NO. Incorporation of small amounts of Cu into Pd improves the reactivity, as well as the resistance to NO inhibition. Beyond this, Cu incorporation into the Pd has a detrimental effect on the activity for CO oxidation. Based on combined infrared and X-ray absorption spectroscopy studies, here we show that high activity and resistance to inhibition requires alloying of Pd and Cu and the formation of a diverse surface, while surface segregation of Cu results in poor activity and inhibition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Temperature Mapping of Stacked Silicon Dies from X-Ray-Diffraction Intensities

Increasing power densities in integrated circuits have led to an increased prevalence of thermal hotspots in integrated circuits. Tracking these thermal hotspots is imperative to prevent circuit failures. In three- dimensional (3D) integrated circuits, conventional surface techniques like infrared thermometry are unable to measure the 3D temperature distribution, and optical and magnetic resonance techniques are difficult to apply due to the presence of metals and large current densities. X-rays offer a high penetration depth and can be used to probe 3D structures. We report a method utilizing the temperature dependence of x-ray-diffraction intensity via the Debye-Waller factor to simultaneously map the temperature of individual silicon dies in a stack. Here, utilizing beamline 1-ID-E at the Advanced Photon Source (Argonne), we demonstrate, for each individual silicon die, a temperature resolution of 3 K, a spatial resolution of 100 × 400 μm 2 , and a temporal resolution of 20 s. Utilizing a sufficiently high-intensity laboratory source, e.g., from a liquid-anode source, this method can be scaled down to laboratories for noninvasive temperature mapping of 3D integrated circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Probing the Electronic and Opto-Electronic Properties of Multilayer MoS 2 Field-Effect Transistors at Low Temperatures

Transition metal dichalcogenides (TMDs)-based field-effect transistors (FETs) are being investigated vigorously for their promising applications in optoelectronics. Despite the high optical response reported in the literature, most of them are studied at room temperature. To extend the application of these materials in a photodetector, particularly at a low temperature, detailed understanding of the photo response behavior of these materials at low temperatures is crucial. Here we present a systematic investigation of temperature-dependent electronic and optoelectronic properties of few-layers MoS 2 FETs, synthesized using the mechanical exfoliation of bulk MoS 2 crystal, on the Si/SiO 2 substrate. Our MoS 2 FET show a room-temperature field-effect mobility μ FE ~40 cm 2 ·V -1 ·s -1 , which increases with decreasing temperature, stabilizing at 80 cm 2 ·V -1 ·s -1 below 100 K. The temperature-dependent (50 K < T < 300 K) photoconductivity measurements were investigated using a continuous laser source λ = 658 nm (E = 1.88 eV) over a broad range of effective illuminating laser intensity, P eff (0.02 μW < P eff < 0.6 μW). Photoconductivity measurements indicate a fractional power dependence of the steady-state photocurrent. The room-temperature photoresponsivity (R) obtained in these samples was found to be ~2 AW -1 , and it increases as a function of decreasing temperature, reaching a maximum at T = 75 K. The optoelectronic properties of MoS 2 at a low temperature give an insight into photocurrent generation mechanisms, which will help in altering/improving the performance of TMD-based devices for various applications.

2D materials↗

DOE OSTI2021

Study of detached plasma profile in the divertor simulation experimental module of tandem mirror GAMMA 10/PDX

A divertor simulation experimental module (D-module) in the tandem mirror GAMMA 10/PDX was used for the study of plasma detachment. In previous studies, it was difficult to measure far-upstream plasma parameters in the D-module, and only electrostatic probes on the target plate were used to perform electron temperature and density measurements. Furthermore, to study the detached plasma structure, a Thomson scattering (TS) system and a microwave interferometer system have been installed to measure the inside plasma parameters of the D-module, and a movable electrostatic probe has been placed at the inlet of the D-module to measure the inlet plasma density and temperature. The TS system in the central cell observed the electron temperature and density of the core plasma simultaneously. These measurements revealed the entire density and temperature structure from the core plasma to the divertor plate. The line average electron density measured by the microwave interferometer showed a rollover behavior during detachment. The results indicated that the ionization region was located around the center of the D-module, and it appears to move upstream along the axis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Analyze the real-time performance of the optimized fiber-PTR instrument

An instrument to perform in-reactor, real-time thermal property measurements of nuclear fuels and materials was recently designed, optimized, and tested at Massachusetts Institute of Technology Research Reactor. It was the second insertion experiments of a total of two rounds. Here we report the collection and analysis of the real-time captured thermal diffusivity data on the preloaded SiC. With the optimized design, the instrument temperature had been successfully raised as we expected. Only one probe (the top one) returned real-time thermal diffusivity in a time span of approximately two days. Measured thermal diffusivity of the preloaded SiC was significantly lower than the literature value at the same temperature, indicating a significant influence from the irradiation induced microstructure damage. Meanwhile, the real-time thermal diffusivity value continuously reduced with time, indicating the dynamic microstructure evolution. The possible reasons of the probes that did not return data were hypothesized. The further optimization of the instrument with the objective to improve the measurement accuracy and instrument survivability is also discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Temperature Field Reconstruction of Surfaces Heated Through Radiative Heat Transfer Using Convolutional Neural Networks

Microreactors could play a crucial role in decarbonizing our energy portfolio. However, their development and implementation come with specific challenges, particularly regarding cost. Due to their compact size and the harsh operational environment, collecting real-time data on reactor operation can be challenging. Many probe designs are unable to withstand extreme conditions (e.g., temperature, radiation) in the reactor. In this context, using convolutional neural networks (CNNs) can pave the way for developing a nonintrusive approach that relies solely on ex-core sensors. A well-trained physics-informed CNN can reconstruct the distribution of a given physical quantity over a domain using only a few sensors, allowing us to reconstruct the desired field distribution even in a limited space or complex geometries where a large array of sensors is impractical. In this work, we present the initial steps toward developing a real-time tool for monitoring the thermal behavior of nuclear reactor pressure vessels. Based on an experimental setup, a computational model using the Multiphysics Object-Oriented Simulation Environment (moose) framework was built, where the Ray Tracing and Heat Conduction modules were used to evaluate the temperature distribution over a convex metal surface heated through radiative heat transfer. This metal surface represents a section of a heated nuclear reactor vessel wall. The model also accounts for solid mechanics physics through the moose Solid Mechanics module. In situ experimental data, acquired from a Texas A&M facility, were used to validate the computational model. Part of the data generated by the moose model was used to train the convolutional neural network to reconstruct the vessel wall's outer surface temperature. The CNN generalization was then compared against the experimental and computational data.

Aldeia Machado, Luiz Carlos↗

DOE OSTI2025

Intermediate-temperature topological Uhlmann phase on IBM quantum computers

A spin-1 system can exhibit an intermediate-temperature topological regime with a quantized Uhlmann phase sandwiched by topologically trivial low- and high-temperature regimes. We present a quantum circuit consisting of system and ancilla qubits plus a probe qubit which prepares an initial state corresponding to the purified state of a spin-1 system at finite temperature, evolves the system according to the Uhlmann process, and measures the Uhlmann phase via expectation values of the probe qubit. Although classical simulations suggest the quantized Uhlmann phase is observable on International Business Machines (IBM’s) noisy intermediate-scale quantum (NISQ) computers, an implementation of the circuit without any optimization exceeds the gate count for the error budget and results in unresolved signals. Through a series of optimization with Qiskit and BQSKit, the gate count can be substantially reduced, making the jumps of the Uhlmann phase more visible. A recent hardware upgrade of IBM quantum computers further improves the signals and leads to a clearer demonstration of interesting finite-temperature topological phenomena on NISQ hardware.

Mastandrea, Christopher [Univ. of California, Merc↗

DOE OSTI2021

Free-space confocal magneto-optical spectroscopies at milliKelvin temperatures

We describe the operation of a free-space confocal optical microscope operated in a dilution refrigerator. The microscope is installed on a cold insertable probe to enable fast sample exchange while the refrigerator is held at low temperatures. A vector magnet provides a 6 T field normal to the sample and 1 T fields at arbitrary angles. A variety of optical microscopies and spectroscopies, including photoluminescence, Raman, magneto-optical Kerr effect, and spin relaxometry measurements are described, and some of the challenges associated with performing these measurements at milliKelvin temperatures are explored.

Lawrie, B. J.↗

DOE OSTI2021

Free-space confocal magneto-optical spectroscopies at milliKelvin temperatures

Lawrie, Benjamin↗

DOE OSTI2024

ARJUNA: An Electrochemical Interface Mapping Probe for Solid-State Batteries

Solid-state batteries (SSBs) are promising candidates for next-generation energy storage, although their performance can be compromised by interfacial heterogeneity within the electrolyte. Furthermore, ensuring the quality of large form-factors electrolyte film is crucial for establishing a robust manufacturing platform for solid-state batteries. Herein, we report on the use of ARJUNA, an electrochemical interface mapping system, to characterize heterogeneities at solid electrolyte interfaces and to serve as a quality control system for SSB manufacturing. In addition to spatial mapping, the proposed system can also probe the interface behavior as a function of pressure and temperature. We present the operating principle, design, instrumentation, and evaluation of the system alongside a typical hybrid solid electrolyte produced using two common manufacturing processes. This report showcases the capability of ARJUNA to probe the heterogeneity and quality of processed solid electrolyte films.

25 ENERGY STORAGE↗