Synergistic Cr[subscript 2]O[subscript 3]@Ag Heterostructure Enhanced Electrocatalytic CO[subscript
Explore the source record for details and available documents.
Fu, Huai Qin↗
SEARCH · Engineering Papers
Results for “T^3”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ionic Modulation at the LaAlO 3 /KTaO 3 Interface for Extreme High-Mobility Two-Dimensional Electron Gas
Due to the coexistence of many emergent phenomena, including 2D superconductivity and a large Rashba spin-orbit coupling, 5d transition metal oxides-based two-dimensional electron systems (2DESs) have been prospected as one of the potential intrants for modern electronics. However, despite the lighter electron mass, the mobility of carriers, a key requisite for high-performance devices, in 5d-oxides devices remains far behind their 3d-oxides analogs. The carriers’ mobility in these oxides is significantly hampered by the inevitable presence of defects. Here, in this study, very high mobility (≈22 650 cm 2 V –1 s –1 ) of 5d-2DES confined at the LaAlO 3 /KTaO 3 interface is reported. The high mobility, which is beyond the values observed in SrTiO 3 2DESs in the same carrier-density range, is achieved using the ionic-liquid gating at room temperature. The authors postulate that the ionic-liquid gating affects the oxygen vacancies and efficiently reduces any disorder at the interface. Investigating density and mobility in a broad range of back-gate voltage, the authors reveal that the mobility follows the power-law µ ∝ n 1.2 , indicating the very high quality of ionic-liquid-gated LaAlO 3 /KTaO 3 devices, consistent with the postulate. Furthermore, the analysis of the quantum oscillations confirms that the high-mobility electrons occupy the electronic sub-bands emerging from the Ta:5d orbitals of KTaO 3 .
36 MATERIALS SCIENCE↗
Nanoscale Mapping and Defect-Assisted Manipulation of Surface Plasmon Resonances in 2D Bi 2 Te 3 /Sb 2 Te 3 In-Plane Heterostructures
Here, the Bi 2 Te 3 /Sb 2 Te 3 in-plane heterostructure is reported as a low-dimensional tunable chalcogenide well suited as plasmonic building block for the visible-UV spectral range. Electron-driven plasmon excitations of low-dimensional Bi 2 Te 3 /Sb 2 Te 3 are investigated by monochromated electron energy loss spectroscopy spectrum imaging. To resolve the nanoscale spatial distribution of various local plasmonic resonances, singular value decomposition is used to disentangle the spectral data and identify the individual spectral contributions of various corner, edge, and face modes. Furthermore, defect-plasmon interactions are investigated both for nanoscale intrinsic and thermally induced extrinsic polygonal defects (in situ sublimation). Signature of defect-induced red shift ranging from a several hundreds of millielectronvolts to a few electronvolts, broadening of various plasmon response, together with selective enhancement and significant variations in their intensity are detected. This study highlights the presence of a heterointerface and identifies defects as physical tuning pathways to modulate the plasmonic response over a broad spectral range. Finally, the experimental observations are compared qualitatively and validated with numerical simulations using the electron-driven discrete dipole approximation. Low-dimensional Bi 2 Te 3 /Sb 2 Te 3 as a less explored plasmonic system holds great promises as emerging platform for integrated plasmonics. Furthermore, introducing controlled structural defects can open the door for nanoengineering of plasmonic properties in such systems.
36 MATERIALS SCIENCE↗
Sm 2 Ru 3 Sn 5 : A Noncentrosymmetric Cubic Member of the Ln 2 M 3 X 5 Family
An optimized synthetic method is presented for Sm 2 Ru 3 Sn 5 and investigate its physical properties and electronic structure. Sm 2 Ru 3 Sn 5 is prepared by arc-melting stoichiometric ratios of the elements and is confirmed by single crystal and powder X-ray diffraction. An antiferromagnetic transition is observed at T N = 3.8 K. A modified Curie-Weiss fit to the data in the range 50–150 K yields a Curie-Weiss temperature: θ CW = −36.6 K and an effective magnetic moment: μ eff = 0.83 μ B , in agreement with a Sm 3+ oxidation state. Field-dependent magnetization up to H = 7 T at 2 K shows a maximum response of 0.06 μ B , which is significantly lower than the expected Sm 3+ saturation moment (0.71 μ B ). Resistivity measurements indicate metallic behavior, and analysis of the magnetic entropy from the heat capacity reveals a doublet ground state due to crystal electric field splitting. The electronic structure and density of states are calculated with density function theory and further supported by the local density approximation with dynamical mean-field theory. Finally, the experimental and computational results highlight localized Sm 3+ moments and suggest a possible interplay between Ruddelman–Kitel–Kasuya–Yosida and Kondo interactions, positioning Sm 2 Ru 3 Sn 5 as a promising material for studying topology and complex physical phenomena.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Thermal partition function of $$ {J}_3{\overline{J}}_3 $$ deformed AdS3
Abstract We derive a compact formula for the one-loop, bosonic string partition function of Euclideanized$$ {J}_3{\overline{J}}_3 $$ J 3 J ¯ 3 deformedAdS 3 with periodic Euclidean time as an integral transform of the partition function of the undeformed EuclideanizedAdS 3 . Such a deformation is interpretable as an irrelevant “single-trace$$ T\overline{T} $$ T T ¯ deformation” of the boundary. We will do this by first establishing a formal procedure to compute a worldsheet torus zero point function for an exactly marginal$$ J\overline{J} $$ J J ¯ deformation of a sigma model with U(1) L × U(1) R global symmetry. We then describe how this procedure is implemented on SL(2,R) sigma model and its Euclidean continuation. Finally, we describe the embedding of the deformed SL(2,R) torus amplitude into critical string theory and interpret the result as the leading perturbative contribution to the thermal partition function of the deformed theory.
Physics↗
Time dependent chlorination of CeO 2 , La 2 O 3 and Nd 2 O 3 by ZrCl 4 dissolved in eutectic LiCl–KCl
Partial chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 was achieved using ZrCl 4 dissolved in molten LiCl-KCl at 450°C over a period of 4-5 hr. ZrCl 4 was pre-volatilized into an argon stream to maintain a constant vapor pressure for equilibration with the salt. This approach was effective at maintaining the ZrCl 4 concentration at the solubility limit of 1.3 mol% in the molten salt throughout the duration of two of the chlorination experiments and within about 60% of the solubility limit in the third experiment. Based on the analysis of salt samples, fractional conversion after four hours of reaction for CeO 2 , and five hours for La 2 O 3 , and Nd 2 O 3 were calculated to be 0.97, 0.28, and 0.65 respectively. Assuming a shrinking core diffusion-limited model, the diffusivity of ZrCl 4 through the hypothesized ZrO 2 layer was calculated for the chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 were 1.76 x 10 -10 cm 2 /sec, 7.85 x 10 -12 cm 2 /sec, and 7.42 x 10 -12 cm 2 /sec, respectively. Given the extremely low values calculated for diffusivity, it was concluded that the process is chemical reaction rate limited and that a complete reaction of each rare earth oxide could be achieved. Furthermore, a chemically controlled shrinking core model was shown to also fit the experimental data closely.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Thermodynamic modeling of KCl-PrCl 3 and KCl-LiCl-PrCl 3 systems
Molten salt electrolysis can recover the actinides from spent nuclear fuels, and it involves a eutectic LiCl-KCl in molten form as an electrolyte. During reprocessing, the concentration of fission products such as La, Nd, Pr, etc., increases and affects the recovery efficiency of the electrolyte. In this work, thermodynamic modeling of KCl-PrCl 3 and KCl-LiCl-PrCl 3 systems was carried out using the CALPHAD (Calculation of Phase Diagrams) approach for the first time. The thermodynamic functions for the pure salts were taken from the SGTE (Scientific Group Thermodata Europe) Substances (SSUB) database. The experimental thermochemical and phase equilibria data available in the literature were used as input for the assessment of KCl-PrCl 3 and KCl-LiCl-PrCl 3 systems. The model parameters for the KCl-LiCl system were adjusted to include the new Gibbs energy descriptions for the pure salts. In addition, the sublattice model for the liquid phase in the LiCl-PrCl 3 system was modified and reassessed to ensure the model compatibility for higher-order extrapolation. There is a good agreement between the experimental and calculated thermochemical and phase diagram data for all the optimized constituent binaries and the ternary system. Furthermore, this work will be beneficial for determining the solubility limit of PrCl 3 in molten LiCl-KCl electrolytes and their thermodynamic properties for improving the efficiency of the pyrochemical process.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Empirical estimation of densities in NaCl-KCl-UCl 3 and NaCl-KCl-YCl 3 molten salts using Redlich-Kister expansion
Densities of molten KCl-NaCl-UCl 3 and KCl-NaCl-YCl 3 ternary systems have been estimated using a multidimensional Redlich-Kister model. Temperature and composition dependent Redlich-Kister functions have been used to generate binary interaction parameters in the outlined ternary salt systems. These binary interactions have been used in the extrapolation to ternary system densities. The results of the density extrapolations by Muggianu interpolation scheme provide agreement within 2–3% for the NaCl-KCl-YCl 3 liquids and 11% in NaCl-KCl-UCl 3 liquids compared to the available experimental data. Modeling NaCl-KCl-UCl 3 molten phase density with a ternary interaction parameter improved the agreement within 4%. Thermophysical modeling used in this study has shown promising results for use in other material properties, such as viscosity, thermal conductivity, and heat capacity of the molten salts. Lastly, the outlined modeling method applied in these specific molten salt ternaries can be used for quaternary or higher multicomponent molten salt systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mastering the synergy between Na 3 V 2 (PO 4 ) 2 F 3 electrode and electrolyte: A must for Na-ion cells
Sodium-ion batteries are emerging as suitable energy storage devices for special applications such as high-power devices with the advantages of being cheaper and more sustainable than the Li-ion equivalents. The sodium ion cells consisting of polyanionic Na 3 V 2 (PO 4 ) 2 F 3 - hard carbon electrodes exhibit high power rate capabilities but limited cycle life, especially at high temperatures. To circumvent this drawback we herein conducted in-depth analyses of the origins of structural degradations occurring in Na 3 V 2 (PO 4 ) 2 F 3 electrodes upon long cycling. Vanadium dissolution with associated parasitic reactions is identified as one of the major reasons for cell failure. Its amount varies depending on the electrolyte, with NaTFSI-based electrolyte showing the least vanadium dissolution as the TFSI - anion decomposes without producing acidic impurities, in contrast to the NaPF 6 -based electrolyte. The dissolved vanadium species undergoes oxidation and reduction processes at the Na 3 V 2 (PO 4 ) 2 F 3 and HC electrodes, respectively, with the electrochemical signature of these processes being used as a fingerprint to identify state of health of the 18650 cells. Here, having found that surface reactivity is the primary cause of vanadium dissolution we provide methods to mitigate it by combining surface coating and optimized electrolyte formulation.
25 ENERGY STORAGE↗
Improved cycle stability and high-rate capability of LiNbO 3 -coated Li 3 VO 4 as anode material for lithium-ion battery
Lithium vanadate (Li 3 VO 4 ) has garnered considerable attention as an alternative negative electrode material for non-aqueous lithium-ion batteries due to its high capacity, energy efficiency, and stable discharge voltage. Nonetheless, the Li 3 VO 4 material displays a low rate capability, attributed mainly to its poor intrinsic electronic conductivity. Here, in this study, we report the synthesis of lithium niobate LiNbO 3 -coated Li 3 VO 4 (LVO@LNO) using a one-pot sol-gel method. The resulting LVO@LNO demonstrates a high reversible capacity of approximately 530 mAh/g, which is more than double that of free Li 3 VO 4 . To explore the effect of the LNO coating process on the morphological and structural properties, Raman, XRD, operando XRD, XPS, SEM and HTEM analyses were conducted. To explain the enhancement of electronic conductivity in our modified material after a LiNbO 3 coating, we conducted an Ex-Situ electrochemical impedance (EIS) and Density Functional Theory (DFT) computational study. Additionally, we designed a full cell utilizing a 1 wt% LNO-coated LVO anode and NMC-811 cathode. The cell yielded an output voltage of approximately 2.8 V with a high initial specific capacity of 350 mAh/g versus to the anode, at 1C with a capacity retention of 85 % after 100 cycles.
25 ENERGY STORAGE↗
Thermodynamic evaluation and modeling of the CeF 3 -LaF 3 -LiF-NaF system
The thermodynamic properties of the LiF-NaF-CeF 3 -LaF 3 pseudo-quaternary system have been evaluated, and models for the relevant phases have been revised or newly developed. The solid solubility of NaF in LaF 3 and CeF 3 was described in the model based on reported phase-equilibria observations and results from density functional theory calculations. The Gibbs energy functions for the NaCeF 4 and NaLaF 4 phases have been updated with recently reported thermochemical measurements. The Gibbs energy functions and model relations for the LiF-NaF-LaF 3 and LiF-NaF-CeF 3 pseudo-ternary systems were successfully optimized based on thermochemical properties and phase equilibria observations.
CALPHAD↗
Surface engineering with oxidized Ti 3 C 2 T x MXene enables efficient and stable p-i-n-structured CsPbI 3 perovskite solar cells
All-inorganic CsPbI 3 perovskite has a near-ideal band gap, high thermal stability, and simple material composition, thus presenting a promising option for developing perovskite/Si tandem solar cells. However, CsPbI 3 undergoes a rapid phase transition under exposure to moisture and exhibits a significant performance gap relative to other perovskite compounds, particularly in the p-i-n structure favored for perovskite/Si tandems. In this work, we demonstrate highly efficient and stable p-i-n-structured CsPbI 3 perovskite solar cells by surface engineering the CsPbI 3 layer with oxidized Ti 3 C 2 T x MXene (OMXene) nanoplates via spray coatings. OMXene provides a physical barrier against moisture and improves charge separation at the perovskite-electron transporting layer interface via an enhanced electric field. Consequently, we demonstrated CsPbI 3 /OMXene-based p-i-n devices with efficiencies of 19.69% for 0.096-cm 2 cells and 14.64% for 25-cm 2 minimodules. The encapsulated minimodule showed good stability, retaining ~85% of the initial efficiency under simultaneous damp heat (85°C/85% relative humidity) and 1-sun light soaking for over 1,000 h.
14 SOLAR ENERGY↗
Search for a bound di-neutron by comparing 3 He(e,e'p)d and 3 H(e,e'p)X measurements
We report on a search for a bound di-neutron by comparing electron-induced proton-knockout $(e,e'p)$ measurements from Helium-3 ($^3$He) and Tritium ($^3$H). The measurements were performed at Jefferson Lab Hall A with a 4.326 GeV electron beam, and kinematics of large momentum transfer $Q^2 \approx 1.9$ (GeV/$c$)$^2$ and $x_B>1$, to minimize contributions from non quasi-elastic (QE) reaction mechanisms. Analyzing the measured $^3$He missing mass ($M_{miss}$) and missing energy ($E_{miss}$) distributions, we can distinguish the two-body break-up reaction, in which the residual proton-neutron system remains bound as a deuteron. In the $^3$H mirror case, under the exact same kinematic conditions, we do not identify a signature for a bound di-neutron with similar binding energy to that of the deuteron. We calculate exclusion limits as a function of the di-neutron binding energy and find that, for binding equivalent to the deuteron, the two-body break-up cross section on $^3$H is less than 0.9% of that on $^3$He in the measured kinematics at the 95% confidence level.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Zr 3 Mn 3 Sn 4 Ga: A new hetero-kagome bilayer antiferromagnet
Here, we report the magnetic and electrical transport properties of single-crystalline Zr 3 Mn 3 Sn 4 Ga, featuring two distinct kagome lattices: a non-magnetic breathing Zr 3 Sn 4 lattice and a magnetic intact Mn 3 Ga lattice. The material undergoes an antiferromagnetic phase transition at T N = 87 K, with neutron diffraction confirming commensurate ordering characterized by k = (1/3,1/3,0). Transport measurements show metallic behavior, a resistivity anomaly near T N , and 12% magnetoresistance at 2 K under 9 T. Deviations from the conventional second-order power law, along with negative magnetoresistance and nonlinear Hall slope variations near T N , suggest strong magneto-electronic coupling. Resonant photoemission spectroscopy identifies Zr 4d and Mn 3d orbitals as dominant contributors to the valence band, linking the material’s unique electronic properties to its kagome layers. Zr 3 Mn 3 Sn 4 Ga offers a valuable platform to study interactions between magnetism and topological electronic bands in hetero-kagome systems using the co- existence of magnetic and non-magnetic kagome layers and its tunable electronic structure.
Crystal structure↗
Thermal Expansion and Response to Pressure of Double-ReO[subscript 3]-Type Fluorides NaM[superscript V]F[subscript 6] (M = Nb, Ta)
Abstract not provided
Lloyd, II, Anthony J.↗
Defect-Accommodating Intermediates Yield Selective Low-Temperature Synthesis of YMnO3 Polymorphs
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Spin and Orbital Effects on Asymmetric Exchange Interaction in Polar Magnets: M(IO 3 ) 2 (M = Cu and Mn)
We report magnetic polar materials feature an astonishing range of physical properties, such as magnetoelectric coupling, chiral spin textures, and related new spin topology physics. This is primarily attributable to their lack of space inversion symmetry in conjunction with unpaired electrons, potentially facilitating an asymmetric Dzyaloshinskii–Moriya (DM) exchange interaction supported by spin–orbital and electron–lattice coupling. However, engineering the appropriate ensemble of coupled degrees of freedom necessary for enhanced DM exchange has remained elusive for polar magnets. Here, we study how spin and orbital components influence the capability of promoting the magnetic interaction by studying two magnetic polar materials, α-Cu(IO 3 ) 2 ( 2 D) and Mn(IO 3 ) 2 ( 6 S), and connecting their electronic and magnetic properties with their structures. The chemically controlled low-temperature synthesis of these complexes resulted in pure polycrystalline samples, providing a viable pathway to prepare bulk forms of transition-metal iodates. Rietveld refinements of the powder synchrotron X-ray diffraction data reveal that these materials exhibit different crystal structures but crystallize in the same polar and chiral P2 1 space group, giving rise to an electric polarization along the b-axis direction. The presence and absence of an evident phase transition to a possible topologically distinct state observed in α-Cu(IO 3 ) 2 and Mn(IO 3 ) 2 , respectively, imply the important role of spin–orbit coupling. Neutron diffraction experiments reveal helpful insights into the magnetic ground state of these materials. While the long-wavelength incommensurability of α-Cu(IO 3 ) 2 is in harmony with sizable asymmetric DM interaction and low dimensionality of the electronic structure, the commensurate stripe AFM ground state of Mn(IO 3 ) 2 is attributed to negligible DM exchange and isotropic orbital overlapping. The work demonstrates connections between combined spin and orbital effects, magnetic coupling dimensionality, and DM exchange, providing a worthwhile approach for tuning asymmetric interaction, which promotes evolution of topologically distinct spin phases.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Dehydration of UO 2 Cl 2 ·3H 2 O and Nd(NO 3 ) 3 ·6H 2 O with a Soft Donor Ligand and Comparison of Their Interactions through X-ray Diffraction and Theoretical Investigation [plus Supplemental Information]
Herein we investigated whether the relatively Lewis basic imidazole-2-thiones could be used to substitute water ligands bound to f-element cations and generate f-element soft donor complexes. Reactions of 1,3-diethylimidazole-2-thione (C 2 C 2 ImT) with Nd(NO 3 ) 3 ·6H 2 O and UO 2 Cl 2 ·3H 2 O led to the isolation of the anhydrous thione complexes Nd(NO 3 ) 3 (C 2 C 2 ImT) 3 and UO 2 Cl 2 (C 2 C 2 ImT) 2 , characterized by single crystal X-ray diffraction. Differences in the strength of metal–thione interactions have been examined by means of the crystal structure analysis and density functional theory (DFT) calculations. The C 2 C 2 ImT ligands were found to be affected by both coordination and noncovalent interactions, making it impossible to deconvolute the effects of one from the other. Calculated partial atomic charges indicated greater ligand-to-metal charge transfer in the [UO 2 ] 2+ complex, indicative of a stronger interaction. The reactivity of C 2 C 2 ImT demonstrates its usefulness in the preparation of f-element soft donor complexes from readily available hydrates that could be useful intermediates for promoting the coordination and studying the effects of soft donor anions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗