SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The effects of material structure on the nonlinearity parameters are reviewed. Problems discussed include definition of nonlinearity parameters, square-law nonlinearity and collinear beam-mixing, structure dependence of the nonlinearity parameters, negative nonlinearity parameters, and implications for materials characterization.
Acoustic radiation from a beam attached to a thin plate
A heavy ion accelerator, RAON is going to be built by Rare Isotope Science Project in Korea. Its target is to accelerate various stable ions such as uranium, proton, and xenon from electron cyclotron resonance ion source and some rare isotopes from isotope separation on-line. The beam shaping, charge selection, and modulation should be applied to the ions from these ion sources because RAON adopts a superconducting linear accelerator structure for beam acceleration. For such treatment, low energy beam transport, radio frequency quadrupole, and medium energy beam transport (MEBT) will be installed in injector part of RAON accelerator. Recently, development of a prototype of stripline beam position monitor (BPM) to measure the position of ion beams in MEBT section is under way. In this presentation, design of stripline, electromagnetic (EM) simulation results, and RF measurement test results obtained from the prototyped BPM will be described.
The electrical, structural, and optical properties of coalescent p-n GaN nanowires (NWs) grown by molecular beam epitaxy on Si (111) substrate are investigated. From photoluminescence measurements the full width at half maximum of bound exciton peaks AX and DA is found as 1.3 and 1.2 meV, respectively. These values are lower than those reported previously in the literature. The current-voltage characteristics show the rectification ratio of about 10{sup 2} and the leakage current of about 10{sup −4} A/cm{sup 2} at room temperature. We demonstrate that the thermionic mechanism is not dominant in these samples and spatial inhomogeneties and tunneling processes through a ∼2 nm thick SiN{sub x} layer between GaN and Si could be responsible for deviation from the ideal diode behavior. The free carrier concentration in GaN NWs determined by capacitance-voltage measurements is about 4 × 10{sup 15 }cm{sup −3}. Two deep levels (H190 and E250) are found in the structures. We attribute H190 to an extended defect located at the interface between the substrate and the SiN{sub x} interlayer or near the sidewalls at the bottom of the NWs, whereas E250 is tentatively assigned to a gallium-vacancy- or nitrogen interstitials-related defect.
The Facility for Antiproton and Ion Research (FAIR) is in its final construction stage next to the campus of the Gesellschaft für Schwerionenforschung Helmholtzzentrum for heavy-ion research in Darmstadt, Germany. Once it starts its operation, it will be the main nuclear physics research facility in many basic sciences and their applications in Europe for the coming decades. Owing to the ability of the new fragment separator, Super-FRagment Separator, to produce high-intensity radioactive ion beams in the energy range up to about 2 GeV/nucleon, these can be used in various nuclear reactions. This opens a unique opportunity for various nuclear structure studies across a range of fields and scales: from low-energy physics via the investigation of multi-neutron systems and halos to high-density nuclear matter and the equation of state, following heavy-ion collisions, fission and study of short-range correlations in nuclei and hypernuclei. Here, the newly developed reactions with relativistic radioactive beams (R3B) set up at FAIR would be the most suitable and versatile for such studies. An overview of highlighted physics cases foreseen at R3B is given, along with possible future opportunities, at FAIR.
The galaxy distribution within the 'Great Wall', the most striking feature in the first three 'slices' of the CfA redshift survey extension is examined. The Great Wall is extracted from the sample and is analyzed by counting galaxies in cells. The 'local' two-point correlation function within the Great Wall is computed and the local correlation length, is estimated 15/h Mpc, about 3 times larger than the correlation length for the entire sample. The redshift distribution of galaxies in the pencil-beam survey by Broadhurst et al. (1990) shows peaks separated about by large 'voids', at least to a redshift of about 0.3. The peaks might represent the intersections of their about 5/h Mpc pencil beams with structures similar to the Great Wall. Under this hypothesis, sampling of the Great Walls shows that l approximately 12/h Mpc is the minimum projected beam size required to detect all the 'walls' at redshifts between the peak of the selection function and the effective depth of the survey.
We investigate the surface electronic structure of SrTiO3 (STO) films grown by a hybrid molecular beam epitaxy that are both stoichiometric and nonstoichiometric by means of x-ray photoelectron spectroscopy and electron energy loss spectroscopy. Increasing the fraction of the surface that is terminated with an SrO layer is correlated with a decrease in the chemical potential whereby the valence band maximum moves closer to the Fermi level, but without a significant change in the bandgap. Inasmuch as SrO-terminated STO (001) has previously been shown to act as an electron scavenger in which carriers from the bulk are trapped, we argue that the high fraction of SrO in the terminal layer is what lowers the chemical potential in Sr-rich STO. Our experimental results provide important insights into various physical phenomena that can occur on STO (001) surfaces and their effect on bulk electronic properties.
Investigating the relationship between structure and dynamical processes is a central goal in condensed matter physics. Perhaps the most noted relationship between the two is the phenomenon of de Gennes narrowing, in which relaxation times in liquids are proportional to the scattering structure factor. Here, a similar relationship is discovered during the self-organized ion-beam nanopatterning of silicon using coherent x-ray scattering. However, in contrast to the exponential relaxation of fluctuations in classic de Gennes narrowing, the dynamic surface exhibits a wide range of behaviors as a function of the length scale, with a compressed exponential relaxation at lengths corresponding to the dominant structural motif—self-organized nanoscale ripples. These behaviors are reproduced in simulations of a nonlinear model describing the surface evolution. Our team suggests that the compressed exponential behavior observed here is due to the morphological persistence of the self-organized surface ripple patterns which form and evolve during ion-beam nanopatterning.
A simple, rational approach is presented for developing continuum models for large repetitive beam-like and plate-like lattices with arbitrary configurations subjected to static, thermal and dynamic loadings. The continuum models for these structures are shear flexible beams and plates. They account for local effects in the repeating element of the actual structure and are characterized by their thermoelastic strain and kinetic energies from which the equations of motion and constitutive relations can be derived. The procedure for developing the expressions for thermoelastic strain and kinetic energies of the continuum involves introducing basic assumptions regarding the variation of the temperature, displacement and strain components in one or two directions (for plate-like and beam-like lattices) and obtaining effective thermoelastic and dynamic coefficients of the continuum in terms of material properties and geometry of the original lattice structure. The high accuracy of the continuum models developed is demonstrated by means of numerical examples.
Eigenvalue problem for beams and rectangular plates with linearly varying in-plane and axial load
Accelerator storage ring designs based on nonlinear integrable Hamiltonian systems provide a novel test-bed for studying the interplay between nonlinear dynamics and space charge at high intensity. In this work, the structure of beam Vlasov equilibria is explored for a constant focusing channel based on the nonlinear focusing potential of the Integrable Optics Test Accelerator. Finally, the dynamics of the single-particle orbits is explored in the combined space charge and external focusing fields as a function of beam current, and the self-consistent relaxation of a mismatched beam to equilibrium is characterized.
Bounds for natural frequency eigenvalues of simply supported uniform beam with constant end load and uniformly distributed axial load
Improved structure for integrated array of AlxGa1-xAs diode lasers causes array to oscillate predominantly in fundamental supermode (with all units at same phase), thereby producing intense, narrow light beam. New structure differs from older ones in that gain in spaces between laser channels is approximately equal to gain in channels.
Beam equation for elastically supported clamped- clamped beam solved for conditions of initial, boundary and distributed load, using Hermitian operator
A spatially modulated interferometer incorporates a beam shearing system having a plurality of reflective surfaces defining separate light paths of equal optical path length for two separate output beams. The reflective surfaces are arranged such that when the two beams emerge from the beam shearing system they contain more than 50 percent of the photon flux within the selected spectral pass band. In one embodiment, the reflective surfaces are located on a number of prism elements combined to form a beam shearing prism structure. The interferometer utilizing the beam sharing system of the invention includes fore-optics for collecting light and focusing it into a beam to be sheared, and a detector located at an exit pupil of the device. In a preferred embodiment, the interferometer has no moving parts.
Approximation method for determining maximum response of simple beams to stationary random excitation perfectly correlated in space and time
Ongoing work in air-vehicle design illustrates the potential of advanced concepts to provide significant improvements in efficiency; but with their incorporation of lightweight flexible structures, such configurations may require active control systems to ensure reliability and safety. However, many contemporary analysis methods are inefficient for aeroelastic analysis and design of such configurations. This paper describes the development of a new approach that automates the geometry setup, mesh generation, and assembly of fluid–structural coupling interfaces to enable efficient aeroelastic and aeroservoelastic analysis of advanced concepts. The core elements for this approach are a cut-cell Cartesian grid-based computational fluid dynamics solver, a nonlinear beam element structural model, a conservative fluid–structural interface treatment, and the formulation and implementation of a new deforming grid capability within the cut-cell Cartesian grid solver. In this paper, emphasis is on this latter component with detailed description given of the mesh motion strategy, evaluation of fluxes and structural loads at the surface, and computation of geometrical properties such as cell volume, directed face areas, centroids, and motion-induced fluxes for deforming Cartesian grids required to advance the flow states. Aeroelastic simulations exercising the capability show favorable agreement with data and predictions in the literature for subsonic and supersonic applications.
Identification of structures which exhibit modal interactions is considered, and the difficulties experienced due to these interactions are examined. Free oscillations of quadratically and cubically coupled pairs of oscillators are analytically studied to illustrate nonlinear interactions between structural modes involved in two-to-one and one-to-one frequency relationships. In light of this study, results obtained from application of the eigensystem realization algorithm toward identification of a beam-mass structure with a two-to-one frequency relationship and quadratic coupling are presented and discussed.