Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stress Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Creep and stress rupture of a mechanically alloyed oxide dispersion and precipitation strengthened nickel-base superalloy

The creep and stress rupture behavior of a mechanically alloyed oxide dispersion strengthened (ODS) and gamma-prime precipitation strengthened nickel-base alloy (alloy MA 6000E) was studied at intermediate and elevated temperatures. At 760 C, MA 6000E exhibits the high creep strength characteristic of nickel-base superalloys and at 1093 C the creep strength is superior to other ODS nickel-base alloys. The stress dependence of the creep rate is very sharp at both test temperatures and the apparent creep activation energy measured around 760 C is high, much larger in magnitude than the self-diffusion energy. Stress rupture in this large grain size material is transgranular and crystallographic cracking is observed. The rupture ductility is dependent on creep strain rate, but usually is low. These and accompanying microstructural results are discussed with respect to other ODS alloys and superalloys and the creep behavior is rationalized by invoking a recently-developed resisting stress model of creep in materials strengthened by second phase particles.

Howson, T. E.↗
NASA NTRS1982

Creep and rupture of an ODS alloy with high stress rupture ductility

The creep and stress rupture properties of an oxide (Y2O3) dispersion strengthened nickel-base alloy, which also is strengthened by gamma-prime precipitates, was studied at 760 and 1093 C. At both temperatures, the alloy YDNiCrAl exhibits unusually high stress rupture ductility as measured by both elongation and reduction in area. Failure was transgranular, and different modes of failure were observed including crystallographic fracture at intermediate temperatures and tearing or necking almost to a chisel point at higher temperatures. While the rupture ductility was high, the creep strength of the alloy was low relative to conventional gamma prime strengthened superalloys in the intermediate temperature range and to ODS alloys in the higher temperature range. These findings are discussed with respect to the alloy composition; the strengthening oxide phases, which are inhomogeneously dispersed; the grain morphology, which is coarse and elongated and exhibits many included grains; and the second phase inclusion particles occurring at grain boundaries and in the matrix. The creep properties, in particular the high stress dependencies and high creep activation energies measured, are discussed with respect to the resisting stress model of creep in particle strengthened alloys.

Mcalarney, M. E.↗
NASA NTRS1985

Lineaments on Ganymede: New Evidence for Late Tectonic Activity

Families of lineaments in the Gilomesh and Ninki basins of Ganymede imply post impact tectonic activity. The grooves, previously considered the youngest tectonic features, are estimated to have formed between 3.8 and 3.1 Gyr ago. One rayed crater however, is probably less than 1 Gyr old, implying tectonic activity on Ganymede has extended nearly to the present. Like the grooves, the lineaments appear to be extensional. The parallel trends and nearly contiguous associations of the lineaments with the grooves imply that both are products of the same stress systems. The young inferred age of the lineaments implies that they (and presumably also the grooves) are not associated with stresses in the cooling of fresh deposits of bright terrain, but are probably associated with underlying convective stress patterns, the long implied duration of an extensional stress regime in Ganymede's lithosphere is consistent with the stress models of derived assuming a differentiated interior.

Croft, S. K.↗
NASA NTRS1985

The geomorphology of Rhea - Implications for geologic history and surface processes

Morphological analyses of landforms on Rhea are used to define three physiographic provinces: cratered terrain 1 undifferentiated; cratered terrain 1 lineated; and cratered terrain 2. The important statigraphic relationships between the different provinces are examined with respect to major impact basins and tectonic features. It is shown that the formation of multiringed basins may have caused, or at least controlled the locations of major resurfacing and mantling events. The diameters of the central peaks relative to the impact crater diameters are found to be significantly larger than those within the craters of the moon or Mercury. Both cratered and noncrater lineaments have regional orientations which do not fit current global or regional stress models. On the basis of the morphological analysis, a chronological order is established for the origin of the three provinces: the cratered terrain 1 province was formed first; and cratered terrain 1 lineated and cratered terrain 2 were formed second, and last, respectively. It is shown that the chronological order is generally consistent with current theoretical models of the evolution of Rhea.

Moore, J. M.↗
NASA NTRS1986

The mechanics of solids in the plastically-deformable state

The mechanics of continua, which is based on the general stress model of Cauchy, up to the present has almost exclusively been applied to liquid and solid elastic bodies. Saint-Venant has developed a theory for the plastic or remaining form changes of solids, but it does not give the required number of equations for determining motion. A complete set of equations of motion for plastic deformable bodies is derived. This is done within the framework of Cauch mechanics. And it is supported by certain experimental facts which characterize the range of applications.

Mises, R. V.↗
NASA NTRS1985

Web team overview

Analytical and experimental work were combined to develop a stress model to determine the temperature profile which will yield a satisfactory web. A thermal model of the web will be used to determine the thermal configuration which will yield the desired temperature profile. Thermal analysis of growth interface and the susceptor melt will be developed to determine a thermal configuration which will improve stability of growth process. The thermal configurations will be designed, fabricated, and tested and the results fed back into the models.

Mcdonald, R. R.↗
NASA NTRS1987

Materials property definition and generation for carbon-carbon and carbon phenolic materials

A data base program to generate statistically significant material-property data for carbon-carbon and carbon phenolic materials to be used in designs of Space Shuttle is described. The program, which will provide data necessary for thermal and stress modeling of Shuttle nozzle and exit cone structures, includes evaluation of tension, compression, shear strength, shear modulus, thermal expansion, thermal conductivity, permeability, and emittance for both materials; the testing of carbon phenolic materials also includes CTE, off-gassing, pyrolysis, and RTG. Materials to be tested will be excised from Space Shuttle inlet, throat, and exit cone billets and modified involute carbon-carbon exit cones; coprocessed blocks, panels, and cylinders will also be tested.

Canfield, A. R.↗
NASA NTRS1987

Evaluation of a theory for pressure-strain rate

A theoretical expression for the slow part (the nonlinear fluctuation part) of the pressure-strain rate is compared with simulations of anisotropic homogeneous flows. The objective is to determine the quantitative accuracy of the theory and to test its prediction that the generalized Rotta coefficient, a non-dimensionalized ratio of slow term to the Reynolds stress anisotropy, varies with direction and can be negative. Comparisons are made between theoretical and simulation values of the slow term itself and of the generalized Rotta coefficients. The implications of the comparison for two-point closure theories and for Reynolds stress modeling are pointed out.

Weinstock, J.↗
NASA NTRS1989

On the large-eddy simulation of transitional wall-bounded flows

The structure of the subgrid scale fields in plane channel flow has been studied at various stages of the transition process to turbulence. The residual stress and subgrid scale dissipation calculated using velocity fields generated by direct numerical simulations of the Navier-Stokes equations are significantly different from their counterparts in turbulent flows. The subgrid scale dissipation changes sign over extended areas of the channel, indicating energy flow from the small scales to the large scales. This reversed energy cascade becomes less pronounced at the later stages of transition. Standard residual stress models of the Smagorinsky type are excessively dissipative. Rescaling the model constant improves the prediction of the total (integrated) subgrid scale dissipation, but not that of the local one. Despite the somewhat excessive dissipation of the rescaled Smagorinsky model, the results of a large eddy simulation of transition on a flat-plate boundary layer compare quite well with those of a direct simulation, and require only a small fraction of the computational effort. The inclusion of non-dissipative models, which could lead to further improvements, is proposed.

Piomelli, Ugo↗
NASA NTRS1989

Computation of three dimensional turbulent boundary layers in internal flows, including turbomachinery rotor blades

A method is developed for predicting three-dimensional turbulent boundary layers occurring in internal flows, including rotor blades of turbomachinery. These boundary layers are complex, turbulent, and are subject to Coriolis and centrifugal forces. The algebraic Reynolds stress model (ARSM) developed in this paper satisfies the realizability conditions exactly and captures the changes in turbulenet structure arising from curvature and rotation. The prediction of pressure driven secondary flow agrees well with the data and all the three turbulent models (k-e, algebraic eddy viscosity, and ARSM) show the same level of agreement. The prediction of boundary layer on rotor blades shows much better agreement with the ARSM. It is essential to employ the higher order models to capture the effects of rotation and curvature and three-dimensional boundary layers in turbomachinery.

Zhang, J.↗
NASA NTRS1990

On the large-eddy simulation of transitional wall-bounded flows

The structure of the subgrid scale fields in plane channel flow has been studied at various stages of the transition process to turbulence. The residual stress and subgrid scale dissipation calculated using velocity fields generated by direct numerical simulations of the Navier-Stokes equations are significantly different from their counterparts in turbulent flows. The subgrid scale dissipation changes sign over extended areas of the channel, indicating energy flow from the small scales to the large scales. This reversed energy cascade becomes less pronounced at the later stages of transition. Standard residual stress models of the Smagorinsky type are excessively dissipative. Rescaling the model constant improves the prediction of the total (integrated) subgrid scale dissipation, but not that of the local one. Despite the somewhat excessive dissipation of the rescaled Smagorinsky model, the results of a large eddy simulation of transition on a flat-plate boundary layer compare quite well with those of a direct simulation, and require only a small fraction of the computational effort. The inclusion of non-dissipative models, which could lead to further improvements, is proposed.

Piomelli, Ugo↗
NASA NTRS1990

On the application of large-eddy simulation to transitional wall-bounded flows

Large-eddy simulations of transition on a flat-plate boundary layer have been carried out. Standard residual stress models of the Smagorinsky type are excessively dissipative, but rescaling the model constant improves the prediction of the total (integrated) subgrid scale dissipation, leading to results that compare favorably with those of a direct simulation, at a small fraction of the computational effort.

Piomelli, Ugo↗
NASA NTRS1991

Extension and strain in Northern Tharsis

The northern areas of Tharsis, south of Alba Patera, are remarkable in that they are dominated by extensive, generally north trending graben. Some graben are small isolated features whereas others are complex overlapping features in which individual fault pairs are impossible to separate. This pattern indicates an east-west extensional stress regime, consistent with stress models for Tharsis. To estimate the regional east-west extension and strain, graben along a profile at 35 N latitude, between longitudes 135 and 93 degs were studied. This profile was chosen because the graben have a northerly trend, the structures are relatively simple, the profile is anchored to ancient Noachian age crust, and high resolution images are available. The western end of the profile begins at Acheron Fossae and ends in the east at the southwestern part of Tempe Fossae. Plains units cut by the graben include Hesperian and Amazonian age members of the Alba Patera and Ceraunius Fossae Formations.

Plescia, J. B.↗
NASA NTRS1992

Predicting equilibrium states with Reynolds stress closures in channel flow and homogeneous shear flow

Turbulent channel flow and homogeneous shear flow have served as basic building block flows for the testing and calibration of Reynolds stress models. A direct theoretical connection is made between homogeneous shear flow in equilibrium and the log-layer of fully-developed turbulent channel flow. It is shown that if a second-order closure model is calibrated to yield good equilibrium values for homogeneous shear flow it will also yield good results for the log-layer of channel flow provided that the Rotta coefficient is not too far removed from one. Most of the commonly used second-order closure models introduce an ad hoc wall reflection term in order to mask deficient predictions for the log-layer of channel flow that arise either from an inaccurate calibration of homogeneous shear flow or from the use of a Rotta coefficient that is too large. Illustrative model calculations are presented to demonstrate this point which has important implications for turbulence modeling.

Abid, R.↗
NASA NTRS1991

Predictions of the critical strain for matrix cracking of ceramic matrix composites

The critical strain for matrix cracking of ceramic matrix composites has been studied; emphasis is placed on the effects of the fiber/matrix debonding length and interfacial debonding energy. Based on a modified shear-lag model, stresses in the fiber and matrix have been found for both the bonded and debonded regions. An energy-balance approach, based upon the stress field, is then adopted to evaluate the critical strain for matrix cracking. From the general equation for the critical strain, close form solutions have been deduced for two limiting cases: complete debonding and perfect bonding. Numerical solutions are given for the cases of nonzero debonding energy and partial fiber debonding. The results show that the interfacial debonding energy, which has been ignored by most of the investigators, is an important factor in determining both the critical strain and the debonding length.

Kuo, Wen-Shyong↗
NASA NTRS1992

On the prediction of turbulent secondary flows

The prediction of turbulent secondary flows, with Reynolds stress models, in circular pipes and non-circular ducts is reviewed. Turbulence-driven secondary flows in straight non-circular ducts are considered along with turbulent secondary flows in pipes and ducts that arise from curvature or a system rotation. The physical mechanisms that generate these different kinds of secondary flows are outlined and the level of turbulence closure required to properly compute each type is discussed in detail. Illustrative computations of a variety of different secondary flows obtained from two-equation turbulence models and second-order closures are provided to amplify these points.

Speziale, C. G.↗