Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Step”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Technoeconomic Assessment of a Sequential Step-Leaching Process for Rare Earth Element Extraction from Acid Mine Drainage Precipitates

Herein, Coal waste products have been studied as a new source of Rare Earth Elements (REEs) and other Critical Minerals (CM) essential for the development of renewable energy technologies, but the economic viability of these source materials is not well understood. This paper examines the technoeconomic performance of a novel process for rare earth element extraction from acid mine drainage precipitates (AMDp) in the Appalachian Coal Basin. The three phase extraction process includes excavation and transportation of AMDp, multi-phase pH driven step-leaching of REEs at ambient conditions, and commercial solvent extraction to produce a saleable grade rare earth oxide material that can be reduced to a pure metal. We estimate the life-cycle cost of bench-scale extraction of REEs from two representative Appalachian AMDp feedstock chemistries at between 4000 – 6000 $/kg of mixed REE concentrate produced. Both the AMDp composition and process parameters affect the profitability of REE extraction, with the REE concentration and distribution of REE in the feedstock, extraction and precipitation reagent consumption rates, and the potential for reagent recycling as the key variables. Economically profitable valorization of REE from AMDp will require a combination of continued process innovation and sizable financial incentives to substantially influence domestic supply of REEs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Oxidative Catalytic Fractionation of Lignocellulosic Biomass Using a Co-N-P-C Catalyst and One-Step Isolation of Aromatic Monomers via Centrifugal Partition Chromatography

Methods for catalytic fractionation of biomass provide a means to convert lignin directly into monomers while generating a high-quality cellulosic stream, contrasting conventional biomass pretreatment strategies that prioritize the cellulosic fraction. Here, a nonprecious-metal Co-N-P-C catalyst is identified for aerobic oxidative catalytic fractionation (OCF) of poplar feedstock in dimethyl carbonate that achieves significantly higher yields of aromatic monomers (24 wt %) relative to those obtained with a recently reported Co-N-C catalyst in acetone solvent (15 wt %). Mechanistic studies indicate that the acidic properties of the catalyst contribute to its improved performance by promoting extraction of lignin from insoluble polysaccharides. This OCF process is complemented by the development of a new centrifugal partition chromatography (CPC) method that supports isolation of all five major aromatic monomers (syringic acid, syringaldehyde, vanillic acid, vanillin, and para-hydroxybenzoic acid) in a single liquid–liquid extraction purification step. Furthermore, this OCF/CPC sequence has important implications for future lignin valorization efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Operando Contactless EFISH Study of the Rate-Determining Step of Light-Driven Water Oxidation on TiO 2 Photoanodes

For many slow solar-fuel-forming reactions, the accumulation of photogenerated minority carriers on the photoelectrode surface leads to light-induced band edge unpinning, affecting the junction properties by decreasing band bending in the semiconductor space charge layer and increasing the driving force of surface reactions in the electric double layer. In this study, we demonstrate a contactless operando electric field-induced second harmonic generation (EFISH) method for measuring the band bending change (δΔΦ SCR L ) on photoelectrodes upon photoexcitation. For ndoped rutile TiO 2 water oxidation photoanodes at pH 7, δΔΦ SCR L increases at more positive potentials or higher illumination power density until it reaches saturation values. We show that under fast mass transport conditions, δΔΦ SCR L is exclusively attributed to the accumulated charged rate-determining species that can be regarded as temporary surface states, and the relationship between the photocurrent and δΔΦ SCR L can be well modeled by assuming that hole trap states function as the reaction center. Kinetic isotope experiments identify proton-coupled electron transfer as the rate-determining step and suggest a possible chemical nature of the key intermediate. We demonstrate that light-induced band edge unpinning is a beneficial feature under high illumination conditions for oxygen evolution reaction on TiO 2 because it maintains the photon-to-current conversion efficiency by enhancing the surface reaction driving force, shedding light on the actual device application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Iridium Nanocrystals Enriched with Defects and Atomic Steps to Enhance Oxygen Evolution Reaction Performance

The presence of defects can significantly improve catalytic activity and stability, as they influence the binding of the reactants, intermediates, and products to the catalyst. Controlling defects in the structures of nanocrystal catalysts is synthetically challenging. In this study, we demonstrate the ability to control the growth of Ir nanocrystals, enabling the tuning of both structural and surface defects. The Ir nanocrystals have unique structures that range from single crystals of a few nanometers to twinned nanoparticles and multiply twinned crystallites with a high density of atomic steps. Further, this approach of defect engineering enables us to understand their roles in enhancing the performance of the OER and producing an Ir catalyst with both high activity and stability. Our results show the importance of the concept of using synthetic control of structural and surface defects in metal nanoparticles as a strategy to improve catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Direct observation of dual-step twinning nucleation in hexagonal close-packed crystals

Design and processing of advanced lightweight structural alloys based on magnesium and titanium rely critically on a control over twinning which, however, remains elusive to date and is dependent on an explicit understanding on the twinning nucleation mechanism in hexagonal close-packed (HCP) crystals. Here, by using in-situ high resolution transmission electron microscopy, we directly reveal a “dual-step” twinning nucleation mechanism in HCP rhenium nanocrystals. It is found that nucleation of the predominant {10 -12} twinning is initiated by disconnections on the Prismatic¦Basal interfaces which establish the lattice correspondence of the twin with a minor deviation from the ideal orientation. Subsequently, the minor deviation is corrected by the formation of coherent twin boundaries through rearrangement of the disconnections on the Prismatic¦Basal interface; thereafter, the coherent twin boundaries propagate by twinning disconnections. The findings provide much-needed high-resolution evidences to the twinning nucleation mechanism in HCP crystals, with crucial implications for engineering advanced structural alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Insight into multi-step geological evolution of C-type asteroids from Ryugu particles

C-type asteroids are the source of the carbonaceous chondrite meteorites and represent remnants of primitive planetesimals that formed at the outer margins of the early Solar System and may have delivered volatiles to the inner Solar System, in particular the early Earth. However, the nature of carbonaceous chondrites is not well understood owing to terrestrial alteration. Here, in this work, we present the petrology and mineral chemistry of surface materials collected by the Japan Aerospace Exploration Agency (JAXA) Hayabusa2 spacecraft from the C-type asteroid Ryugu. The Ryugu particles we studied are similar to CI (Ivuna-type) chondrites but with some important differences, such as the presence of Na–Mg phosphates and Na-rich phases and the lack of ferrihydrite and gypsum. Ryugu particles experienced several steps of aqueous alteration, metasomatism and brecciation under variable conditions. These materials represent mixed lithologies and formed at different locations within their parent asteroid. The evidence presented here demonstrates that the C-type asteroid Ryugu experienced a complex geologic evolution shortly after its formation.

58 GEOSCIENCES↗
DOE OSTI2021

Structural and mechanistic insights into the bifunctional HISN2 enzyme catalyzing the second and third steps of histidine biosynthesis in plants

The second and third steps of the histidine biosynthetic pathway (HBP) in plants are catalyzed by a bifunctional enzyme–HISN2. The enzyme consists of two distinct domains, active respectively as a phosphoribosyl-AMP cyclohydrolase (PRA-CH) and phosphoribosyl-ATP pyrophosphatase (PRA-PH). The domains are analogous to single-domain enzymes encoded by bacterial hisI and hisE genes, respectively. The calculated sequence similarity networks between HISN2 analogs from prokaryotes and eukaryotes suggest that the plant enzymes are closest relatives of those in the class of Deltaproteobacteria. In this work, we obtained crystal structures of HISN2 enzyme from Medicago truncatula (MtHISN2) and described its architecture and interactions with AMP. The AMP molecule bound to the PRA-PH domain shows positioning of the N1-phosphoribosyl relevant to catalysis. AMP bound to the PRA-CH domain mimics a part of the substrate, giving insights into the reaction mechanism. The latter interaction also arises as a possible second-tier regulatory mechanism of the HBP flux, as indicated by inhibition assays and isothermal titration calorimetry.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Bioinformatics of cyanophycin metabolism genes and characterization of promiscuous isoaspartyl dipeptidases that catalyze the final step of cyanophycin degradation

Cyanophycin is a bacterial biopolymer used for storage of fixed nitrogen. It is composed of a backbone of L-aspartate residues with L-arginines attached to each of their side chains. Cyanophycin is produced by cyanophycin synthetase 1 (CphA1) using Arg, Asp and ATP, and is degraded in two steps. First, cyanophycinase breaks down the backbone peptide bonds, releasing β-Asp-Arg dipeptides. Then, these dipeptides are broken down into free Asp and Arg by enzymes with isoaspartyl dipeptidase activity. Two bacterial enzymes are known to possess promiscuous isoaspartyl dipeptidase activity: isoaspartyl dipeptidase (IadA) and isoaspartyl aminopeptidase (IaaA). We performed a bioinformatic analysis to investigate whether genes for cyanophycin metabolism enzymes cluster together or are spread around the microbial genomes. Many genomes showed incomplete contingents of known cyanophycin metabolizing genes, with different patterns in various bacterial clades. Cyanophycin synthetase and cyanophycinase are usually clustered together when recognizable genes for each are found within a genome. Cyanophycinase and isoaspartyl dipeptidase genes typically cluster within genomes lacking cphA1. About one-third of genomes with genes for CphA1, cyanophycinase and IaaA show these genes clustered together, while the proportion is around one-sixth for CphA1, cyanophycinase and IadA. We used X-ray crystallography and biochemical studies to characterize an IadA and an IaaA from two such clusters, in Leucothrix mucor and Roseivivax halodurans, respectively. The enzymes retained their promiscuous nature, showing that being associated with cyanophycin-related genes did not make them specific for β-Asp-Arg dipeptides derived from cyanophycin degradation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

One-step lignocellulose depolymerization and saccharification to high sugar yield and less condensed isolated lignin

The cost of sugar production remains a key challenge in future lignocellulosic biorefineries. We demonstrate that ZnBr 2 , an inexpensive inorganic salt, provides nearly theoretical yields of glucose and xylose in one-step from poplar wood at 85 °C and short reaction times at molten salt hydrate (MSH) conditions without an acid. Catalytic depolymerization of the isolated MSH lignin, using a CoS 2 catalyst, yields 17% phenol-like monomers compared to only 1% produced from the acidified MSH lignin. Reductive catalytic fractionation of MSH lignin over Ru/C resulted in two times higher total monomer yield compared to the AMSH lignin. Both the lignin samples were characterized using 2D HSQC NMR and the thioacidolysis method. Thioacidolysis studies reveal 8.4% and 1.8% of β-O-4 linkages in MSH and acidified MSH lignin, respectively. Thermodynamic modeling and 13 C NMR spectroscopy indicate that the effectiveness of this catalyst arises from the strong interaction of the Lewis acidic zinc cation (Zn 2+ ) with the coordinated water molecules resulting in hydrolysis of the metal aquo complex and to the salt-driven increase in the H + activity coefficient. Techno-economic analysis demonstrates that despite being slower, the ZnBr 2 MSH media has cost advantages, compared to conventional hydrolysis and even to the LiBr and ZnBr 2 AMSH, due to the higher quality of lignin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

One-step fabrication of robust lithium ion battery separators by polymerization-induced phase separation

Conventional lithium ion battery separators are microporous polyolefin membranes that play a passive role in the electrochemical cell. Next generation separators should offer significant performance enhancements, while being fabricated through facile, low cost approaches with the ability to readily tune physicochemical properties. This study presents a single-step manufacturing technique based on UV-initiated polymerization-induced phase separation (PIPS), wherein microporous separators are fabricated from multifunctional monomers and ethylene carbonate (EC), which functions as both the pore-forming agent (porogen) and electrolyte component in the electrochemical cell. By controlling the ratio of the 1,4-butanediol diacrylate (BDDA) monomer to ethylene carbonate, monolithic microporous membranes are readily prepared with 25 μm thickness and pore sizes and porosities ranging from 6.8 to 22 nm and 15.4% to 38.5%, respectively. With 38.5% apparent porosity and an average pore size of 22 nm, the poly(1,4-butanediol diacrylate) (pBDDA) separator takes up 127% liquid electrolyte, resulting in an ionic conductivity of 1.98 mS cm –1 , which is greater than in conventional Celgard 2500. Lithium ion battery half cells consisting of LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathodes and pBDDA separators were shown to undergo reversible charge/discharge cycling with an average discharge capacity of 142 mA h g –1 and a capacity retention of 98.4% over 100 cycles – comparable to cells using state-of-the-art separators. Moreover, similar discharge capacities were achieved in rate performance tests due to the high ionic conductivity and electrolyte uptake of the film. Finally, the pBDDA separators were shown to be thermally stable to 374 °C, lack low temperature thermal transitions that can compromise cell safety, and exhibit no thermal shrinkage up to 150 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuneable phase behaviour and glass transition via polymerization-induced phase separation in crosslinked step-growth polymers

We report once limited to chain-growth polymerizations, fine control over polymerization-induced phase separation (PIPS) has recently been demonstrated in rubber-toughened thermoset materials formed through step-growth polymerizations. The domain length scales of these thermoset materials can be elegantly tuned by utilizing a binary mixture of curing agents (CAs) that individually yield disparate morphologies. Importantly, varying the composition of the binary mixture affects characteristics of the materials such as glass transition temperature and tensile behavior. Here, we establish a full phase diagram of PIPS in a rubber-toughened epoxy system tuned by a binary CA mixture to provide a robust framework of phase behaviour. X-Ray scattering in situ and post-PIPS is employed to elucidate the PIPS mechanism whereby an initial polymerization-induced compositional fluctuation causes nanoscale phase separation of rubber and epoxy components prior to local chain crosslinking and potential macrophase separation. We further demonstrate the universality of this approach by alternatively employing binary epoxy or binary rubber mixtures to achieve broad variations in morphology and glass transitions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Monte Carlo evaluation of the semiclassical multi-step direct reaction series

We show how the multi-step direct reaction series can be evaluated using Monte Carlo methods. Nucleon-nucleon collisions occur according to the random selection of a nucleon’s attenuation factor along its classical trajectory. The particles and hole excited in a collision are selected from a local Fermi distribution. We assume that the particles continue to propagate and possibly collide again before leaving the nucleus. We assume that holes collide in place, to possibly produce other particles and holes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Preservation of kinetics parameters generated by Monte Carlo calculations in two-step deterministic calculations

The generation of accurate kinetic parameters such as mean generation time Λ and effective delayed neutron fraction β eff via Monte Carlo codes is established. Employing these in downstream deterministic codes warrants another step to ensure no additional error is introduced by the low-order transport operator when computing forward and adjoint fluxes for bilinear weighting of these parameters. Another complexity stems from applying superhomogenization (SPH) equivalence in non-fundamental mode approximations, where reference and low-order calculations rely on a 3D full core model. In these cases, SPH factors can optionally be computed for only part of the geometry while preserving reaction rates and K-effective, but the impact of such approximations on kinetics parameters has not been thoroughly studied. This paper aims at studying the preservation of bilinearly-weighted quantities in the Serpent–Griffin calculation procedure. Diffusion and transport evaluations of IPEN/MB-01, Godiva, and Flattop were carried out with the Griffin reactor physics code, testing available modeling options using Serpent-generated multigroup cross sections and equivalence data. Verifying Griffin against Serpent indicates sensitivities to multigroup energy grid selection and regional application of SPH equivalence, introducing significant errors; these were demonstrated to be reduced through the use of a transport method together with a finer energy grid.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Computational Fermi Level Engineering and Doping-Type Conversion of Mg:Ga 2 O 3 via Three-Step Synthesis Process

Gallium oxide (Ga 2 O 3 ) is being actively explored for electronics that can operate at high power, temperature, and frequency as well as for deep-ultraviolet optoelectronics and other applications due to its ultra-wide bandgap (UWBG) and low projected fabrication cost of large-size and high-quality crystals. Efficient n-type doping of monoclinic beta-phase of Ga 2 O 3 has been achieved, but p-type doping faces fundamental obstacles due to compensation, deep acceptor levels, and the polaron transport mechanism of free holes. However, aside from the challenges of achieving p-type conductivity, plenty of opportunity exists to engineer the position of the Fermi level for improved design of Ga 2 O 3 -based devices. We use first-principles defect theory and defect equilibrium calculations to simulate a three-step growth-annealing-quench synthesis protocol for hydrogen-assisted Mg doping in ß-Ga 2 O 3 . The simulations take into account the gas phase equilibrium between H 2 , O 2 , and H 2 O, which determines the H chemical potential. We predict Ga 2 O 3 doping-type conversion to a net p-type regime after growth under reducing conditions in the presence of H2 followed by O-rich annealing, which is a similar process to Mg acceptor activation by H removal in GaN. For equilibrium annealing with re-equilibration of compensating O vacancies, there is an optimal temperature that maximizes the Ga 2 O 3 net acceptor density for a given Mg doping level; the acceptor density is further increased in the non-equilibrium annealing scenario without re-equilibration. After quenching to operating temperature, the Ga 2 O 3 Fermi level drops below mid-gap down to about 1.5 eV above the valence band maximum, creating a significant number of uncompensated neutral Mg Ga 0 acceptors. The resulting free hole concentration in Ga 2 O 3 is very low even at elevated operating temperature (~10 8 cm -3 at 400°C) due to the deep energy level of these Mg acceptors, and hole conductivity is further impeded by the polaron hopping mechanism. However, the Fermi-level reduction and suppression of free electron density in this doping-type converted (NA>ND) Ga 2 O 3 material are important for improved designs of Ga 2 O 3 electronic devices. These results illustrate the power of computational predictions not only for new materials but also for their synthesis science.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The exact exchange–correlation potential in time-dependent density functional theory: Choreographing electrons with steps and peaks

The time-dependent exchange–correlation potential has the unusual task of directing fictitious non-interacting electrons to move with exactly the same probability density as true interacting electrons. This has intriguing implications for its structure, especially in the non-perturbative regime, leading to step and peak features that cannot be captured by bootstrapping any ground-state functional approximation. Here, we review what has been learned about these features in the exact exchange–correlation potential of time-dependent density functional theory in the past decade or so and implications for the performance of simulations when electrons are driven far from any ground state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗