Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Inhibit the strain accumulation for 5V spinel cathode by mitigating the phase separation during high voltage stage

LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel cathode is a potential cathode material for high-power, low-cost lithium-ion batteries (LIBs) due to its low raw material cost, high operating voltage and efficient lithium-ion transport channel. However, LNMO suffers from structural stability due to the two-phase-transformation during charge/discharge process, leading to poor cycling performance. Here, to address the issues, we have constructed a homogeneous aggregated LNMO cathode with a multifaceted primary particle, namely the LNMO with single-crystal secondary particles (SSP LNMO). Ex situ and in situ characterizations including the synchrotron X-ray diffraction, the neutron diffraction and full pouch cell validated that the SSP LNMO exhibit a single solid-solution reactions with a restrained lattice evolution during the delithiation/lithiation process. This is in contrast to the normal LNMO cathode, which demonstrates a significant two-phase transition from spinel Li 1-x Ni 0.5 Mn 1.5 O 4 to rock-salt MnO 2 at high voltage. Therefore, the SSP LNMO has greatly improved cycle life compared to the normal LNMO cathode. Overall, this study demonstrates the possibility of constructing LNMO based on primary-grain morphology modulation to improve the intrinsic stability of LIBs.

25 ENERGY STORAGE↗

Ion irradiation-induced crystal structure changes in inverse spinel MgIn 2 O 4

We performed 400 keV Ne and 200 keV He ion irradiations on fully inverse MgIn 2 O 4 samples at cryogenic temperature (~ 77 K), in order to examine the influence of radiation-induced cation disordering on crystal structure. In the case of MgIn 2 O 4 samples irradiated with Ne ions to a peak displacement damage dose of 4 displacements per atom (dpa), a spinel-to-rocksalt phase transformation was observed. Conversely, for MgIn 2 O 4 samples irradiated with He ions to a peak displacement damage dose of 5 dpa, the only observed structural effect involved cation rearrangements from an inverse to a “random” spinel structure.

36 MATERIALS SCIENCE↗

Comparing the Pressure-Induced Structural Behavior of CuCr 2 O 4 and CuCr 2 Se 4 Spinels

We have conducted high-pressure measurements on the CuCr 2 O 4 and CuCr 2 Se 4 spinels to unravel the structural systematics of these materials under compression. Our studies have revealed diverse structural behavior in these two compounds. In particular, CuCr 2 O 4 retains its ambient-pressure I4 1 /amd structure up to 50 GPa. Close inspection of the lattice and interatomic parameters reveals a compressibility change near 23 GPa, which is accompanied by an expansion of the apical Cr–O bond distances. We speculate that an outer Cr 3+ 3d orbital reorientation might be at play in this system, manifesting as the change in compressibility at that pressure point. On the other hand, CuCr 2 Se 4 undergoes a structural transformation from the starting Fd3¯m phase toward a monoclinic structure initiated at ~8 GPa and completed at ~20 GPa. Furthermore, this high-pressure behavior resembles that of ZnCr 2 Se 4 , and it appears that, unlike similar chalcogenide Cr spinels, steric effects take a leading role in this pressure-induced Fd3¯m → monoclinic transition. Close comparison of our results with the reported literature yields significant insights behind the pressure-induced structural systematics of this important family of materials, thus both allowing for the careful manipulation of the structural/physical properties of these systems by strain and promoting our understanding of similar pressure-induced effects in relevant systems.

36 MATERIALS SCIENCE↗

Electrochemical Reduction of a Spinel-Type Manganese Oxide Cathode in Aqueous Electrolytes with Ca 2+ or Zn 2+

In this report, the feasibility of reversible Ca 2+ or Zn 2+ intercalation into a crystalline cubic spinel Mn 2 O 4 cathode has been investigated using electrochemical methods in an aqueous electrolyte. A combination of synchrotron XRD and XANES studies identified the partial structural transformation from a cubic to a tetragonally distorted spinel Mn 3 O 4 , accompanied by the reduction of Mn 4+ to Mn 3+ and Mn 2+ during discharge. TEM/EDX measurements confirmed that practically no Ca 2+ was inserted upon discharge. However, non-negligible amounts of Zn were detected after Mn 2 O 4 was reduced in the Zn 2+ electrolyte, but through the formation of secondary phases that, in some cases, appeared adjacent to the surface of a cathode particle. Furthermore this report aims to identify bottlenecks in the application of manganese oxide cathodes paired with Ca or Zn metal anodes and to justify future efforts in designing prototype multivalent batteries.

25 ENERGY STORAGE↗

Spinel Cu–Mn–Cr Oxide Nanoparticle-Pigmented Solar Selective Coatings Maintaining >94% Efficiency at 750 °C

High-temperature concentrating solar power (CSP) system is capable of harvesting and storing solar energy as heat towards cost-effective dispatchable solar electricity. Solar selective coating is a critical component to boost its efficiency by maximizing solar absorptance and minimizing thermal emittance losses. However, maintaining a high solar-thermal conversion efficiency >90% for long-term operation at ≥750 ºC remains a significant challenge. Herein, we report spray-coated spinel Cu-Mn-Cr oxide nanoparticle-pigmented solar selective coatings on Inconel tube sections maintaining ≥94% efficiency at 750 ºC and ≥92.5% at 800 ºC under 1000x solar concentration after 60 simulated day-night thermal cycles in air, each cycle comprising 12h at 750 ºC/800 ºC and 12h cooling to 25 ºC. The solar spectral selectivity is intrinsic to the band-to-band and d-d transitions of non-stoichiometric spinel Cu-Mn-Cr oxide nanoparticles. Furthermore, this feature offers a large fabrication tolerance in nanoparticle volume fraction and coating thickness, facilitating low-cost and scalable spray-coated high-efficiency solar selective absorbers for high-temperature CSP systems.

14 SOLAR ENERGY↗

Ultrafast Formation of Jahn–Teller Polarons Revealed by State-Selective Excitation in Correlated Spinel Co 3 O 4

Jahn–Teller polarons are quasiparticles that stem from symmetry breaking and strong local electron–phonon coupling. They originate from an excess charge carrier being dressed by a local lattice distortion, caused by the Jahn–Teller effect, and they critically impact electrical, structural, and magnetic properties in transition metal oxides. The observation of the microscopic steps involved in their formation is essential for enabling control over material properties through the targeted activation of local, site-specific modifications with light pulses. While Jahn–Teller distortion associated with polaron formation was predicted to contribute significantly to changes in electronic band gap and optical properties in Co 3 O 4 , its experimental observation remains elusive, requiring signatures of local symmetry reduction. In this work, we demonstrate Jahn–Teller polaron formation in spinel Co 3 O 4 . By exciting electronic transitions at 3.10 eV and 1.55 eV, we target either the Oh Cobalt(III) or the Td Cobalt(II) ions, and drive the subsequent coherent responses of the system through two different pathways. For the former, we demonstrate that ligand-to-metal charge transfer leads to Jahn–Teller polaron formation, which is linked to the deformation potential and magnetoelastic coupling. For the latter, we identify the coherent excitation of a T 2g phonon mode launched by on-site d-d electronic transitions. Key to our observations is the ability to target site-specific electronic excitations in spinel Co 3 O 4 using ultrafast optical pulses, while monitoring the ensuing low-energy collective modes through the coherent time-domain response of the material. Our approach, which combines the comparative analysis of experimental fingerprints with the support from density functional theory calculations, is broadly applicable to systems in which Jahn–Teller polaron physics has been theoretically predicted but remains experimentally unverified, and it underscores the potential of electronic-state targeting as a route to selectively excite and probe quasiparticle dynamics in solids.

Lattices↗

Ultrasound nondestructive characterization of transparent spinel

Ceramic materials have attractive attributes for applications that experience high stresses or strain rates. Compared to metal-based systems, ceramics offer a lower areal density which reduces weight, but do not depreciate the integrity of other properties. The ability to tailor the microstructure of ceramics used in armor systems is a common way to increase specific mechanical properties or obtain certain material characteristics. Properties such as elastic modulus, hardness, and density are those that are typically desired to be enhanced. By modifying the microstructure one can obtain a ceramic with these enhanced properties as well as high optical transmission across a wide range of the electromagnetic spectrum. The testing of these properties and ballistic performance is usually destructive, expensive, and time consuming. Common assessments using ultrasonic NDE usually include spatially locating large flaws, sonic velocity measurements, and elastic property measurements. The use of acoustic spectroscopy to go beyond typical ultrasonic NDE in structural ceramics and allow for the use of a microstructural characterization tool is investigated in this paper. Ultrasound absorption by lithium fluoride precipitates in aluminate spinel (MgAl{sub 2}O{sub 4}) present as defined spectral peaks. Average heterogeneity size determination in magnesium aluminate spinel MgAl{sub 2}O{sub 4} by method of acoustic spectroscopy is shown.

36 MATERIALS SCIENCE↗

Study of microstructure and semiconductor to metallic conductivity transition in solid state sintered Li{sub 0.5}Mn{sub 0.5}Fe{sub 2}O{sub 4−δ} spinel ferrite

Li{sub 0.5}Mn{sub 0.5}Fe{sub 2}O{sub 4} ferrite has been prepared by solid state sintering route. XRD pattern showed single phased cubic spinel structure. The samples exhibited typical character of plastoferrite with ring shaped surface microstructure. New feature observed in the present ferrite is the frequency activated conductivity transition from semiconductor to metallic state above 800 K. The increase of conductivity with frequency in the semiconducting regime follows Jonscher power law, while decrease of conductivity in metallic regime obeys Drude equation. The conductivity in semiconductor regime has been understood by hopping mechanism of localized charge carriers among the cations in B sites of cubic spinel structure. At higher temperatures, overlapping of electronic orbitals from neighbouring ions and free particle like motion of lighter Li{sup +} ions among interstitial lattices contributed metallic conductivity. The samples provided evidence of localized nature of the charge carriers at lower temperatures and increasing delocalized character with the increase of measurement temperature. From application point of view, such ferrites behave as semiconductor at low temperature and allow electromagnetic wave to pass through, but transform into a metallic reflector with negative dielectric constant at high temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dirac cones in artificial structures of 3d transitional-metals doped Mg-Al spinels

Motivated by recent theoretical predications for Dirac cone in two-dimensional (2D) triangular lattice [H. Ishizuka, Phys. Rev. Lett. 109, 237207 (2012)], first-principles studies are performed to predict Dirac cones in artificial structures of 3d transitional-metals (TM = Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) doped Mg-Al spinels. In investigated artificial structures, TM dopants substitute specific positions of the B sub-lattice in Mg-Al spinel, and form a quasi-2D triangular lattice in the a-b plane. Calculated results illustrate the existence of the spin-polarized Dirac cones formed in d-wave bands at (around) the K-point in the momentum space. The study provides a promising route for engineering Dirac physics in condensed matters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First principles study of the structural, elastic, electronic and phonon properties of CdX{sub 2}O{sub 4} (X=Al, Ga, In) spinel-type oxides

We have performed ab-initio calculations of the structural, electronic, elastic and dynamical properties for the spinel compounds CdX{sub 2}O{sub 4} (X=Al, Ga, In) using the plane wave pseudo-potential method within the generalized gradient approximation (GGA). The calculated lattice parameters, elastic constants for these compounds are in good agreement with the previous calculated values. The computed direct band gaps of CdAl{sub 2}O{sub 4}, CdGa{sub 2}O{sub 4} and CdIn{sub 2}O{sub 4} are 2.90 eV, 1.92 eV and 1.16 eV, respectively. The lattice vibrations were calculated by direct method. The calculated phonon dispersion curves show that all compounds are dynamically stable in the spinel structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic properties of yttrium and lanthanum-doped Ni-Co and Ni-Co-Zn spinel ferrites

Rare earth doping of Co-rich spinel ferrites is investigated through the preparation of two groups of polycrystalline Ni-Co and Ni-Co-Zn ferrites, where Fe is partly substituted by Y and La. The characterization of the sintered ferrites by means of X-ray powder diffraction and Rietveld profile analysis, indicates the subtle expansion of the spinel unit cell and the cation redistribution in the doped ferrites in order to accommodate the incorporation of Y and La in the lattice. The impurity traces, detected only in the Ni-Co-Zn group, is ascribed to the Zn population in the tetrahedral A-sites impeding the cation transfer. Moreover, the examined microstructure of the doped Ni-Co samples comprises enlarged and more homogeneous grains, whereas grain growth is moderated in the doped Ni-Co-Zn ferrites. The discussed characteristics of the crystal and magnetic structure along with the morphological aspects define the impact of Y and La doping on the static magnetic properties of Ni-Co and Ni-Co-Zn ferrites, saturation magnetization MS and coercivity HC, which were extracted from the respective hysteresis loops.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An investigation of aluminum titanate-spinel composites behavior in radiation

In the present work, the radiation attenuation properties of Aluminum titanate (Al{sub 2}TiO{sub 5})-Spinel (MgAl{sub 2}O{sub 4}) ceramics composites were investigated. Al{sub 2}TiO{sub 5}-MgAl{sub 2}O{sub 4} ceramics composites which have different Al{sub 2}TiO{sub 5} percentages (0%, 5% and 10%) were produced and performed against gamma sources. Cs-137 and Co-60 were used as gamma radiation sources. Transmission technique was used in the experiments. The linear and mass attenuation coefficients of the samples were carried out for gamma radiation sources. The experimental results were compared with the theoretical mass attenuation coefficients which were calculated by using XCOM computer code. Increasing Al{sub 2}TiO{sub 5} percentage in the Aluminum titanate/ Spinel ceramics composites causes the higher linear and mass attenuation coefficients of the composites against Cs-137 and Co-60 gamma radioisotopes. Therefore Also theoretical mass attenuation coefficients are compatible with the experimental results. In conclusion, increasing the Aluminum titanate ratio in the Al{sub 2}TiO{sub 5}-MgAl{sub 2}O{sub 4} ceramics composites increases the gamma shielding property of the Al{sub 2}TiO{sub 5}-MgAl{sub 2}O{sub 4} ceramics for nuclear shielding applications.

36 MATERIALS SCIENCE↗

Polyethylene glycol coated CoFe{sub 2}O{sub 4} nanoparticles: A potential spinel ferrite for biomedical applications

The structural and magnetic properties of the polyethylene glycol (PEG) coated cobalt spinel ferrite (CoFe{sub 2}O{sub 4}) nanoparticles have been reported in the present study. CoFe{sub 2}O{sub 4} nanoparticles were prepared by sol-gel auto-combustion method using citric acid + ethylene glycol as a fuel. The prepared powder of cobalt ferrite nanoparticles was annealed at 600°C for 6h and used for further study. The structural characterization of CoFe{sub 2}O{sub 4} nanoparticles were carried out by X-ray diffraction technique. The X-ray analysis confirmed the formation of single phase cubic spinel structure. The crystallite size, Lattice constant and X-ray density of the PEG coated CoFe{sub 2}O{sub 4} nanoparticles were calculated by using XRD data. The presence of PEG on CoFe{sub 2}O{sub 4} nanoparticles and reduced agglomeration in the CoFe{sub 2}O{sub 4} nanoparticles were revealed by SEM studies. The magnetic properties were studied by pulse field hysteresis loop tracer technique at a room temperature. The magnetic parameters such as saturation magnetization, remanence magnetization, coercivity etc have been obtained. These magnetic parameters were get decreased by PEG coating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin reorientation in multiferroic spinel Co{sub 0.5}Fe{sub 0.5}Cr{sub 2}O{sub 4} with Mössbauer spectroscopy

We studied the magnetic properties of multiferroic spinel Co{sub 0.5}Fe{sub 0.5}Cr{sub 2}O{sub 4}, especially focusing on the spin-ordering, spin-reorientation, and charge re-distribution effects. From the Rietveld refinement analysis, the crystal structure was identified to be a normal cubic spinel of Fd-3m. Based on the temperature-dependent measurements of the magnetization and magnetic hyperfine field (H{sub hf}), Curie temperature (T{sub C}) of Co{sub 0.5}Fe{sub 0.5}Cr{sub 2}O{sub 4} was determined to be around 86 K where H{sub hf} ≅ 0. From the change of slope in the M-T curve, the conical-spiral magnetic ordering temperature was determined to be 20 K, which coincides with H{sub hf} measurement. Also, we have observed the decrease in the slope of the electric quadrupole splitting (ΔE{sub Q}) curve above 20 K, suggesting that the change in ΔE{sub Q} around T{sub S} is originated from charge redistribution due to the spin-relocation associated with the distortion of each tetrahedral site around Fe{sup 2+} ion above T{sub S}. This indicates that Co{sub 0.5}Fe{sub 0.5}Cr{sub 2}O{sub 4} has the noncollinear conical-spiral spin ordering with incommensurate spin structure below T{sub S}, while above T{sub S}, it has ferrimagnetic spin ordering with commensuration in the collinear state. In addition, the Jahn-teller distortion temperature is measured to be around 155 K, since both ΔE{sub Q} and Δ{sub 1} of {sup 5}T{sub 2g} band decrease rapidly with increasing temperature and disappear around 155 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of spinel oxides ZnSc{sub 2}O{sub 4} and ZnY{sub 2}O{sub 4}: A first principle study

The electronic structure spinel ZnSc{sub 2}O{sub 4} and ZnY{sub 2}O{sub 4} were studied by the self-consistent tight-binding linearized muffin-tin orbital method with the atomic sphere approximation. The calculated results predict these zinc-based spinel oxides to be direct-gap materials. The direct gap at Γ is found to value 3.9 eV for ZnSc{sub 2}O{sub 4} and 3.4 eV for ZnY{sub 2}O{sub 4}. The systematic decrease in the gap is attributed to the presence of 3d orbital’s of Zn and Sc/Y and the associated p–d hybridization in the upper valence band of ZnSc{sub 2}O{sub 4} and ZnY{sub 2}O{sub 4}. The value of lattice parameters, band gap, bulk modulus, are deduced and reported for the first time to our knowledge.

36 MATERIALS SCIENCE↗

Controlling inversion disorder in a stoichiometric spinel magnet

In the study of frustrated quantum magnets, it is essential to be able to control the nature and degree of site disorder during the growth process, as many measurement techniques are incapable of distinguishing between site disorder and frustration-induced spin disorder. Pyrochlore-structured spinel oxides can serve as model systems of geometrically frustrated three-dimensional quantum magnets; however, the nature of the magnetism in one well-studied spinel, ZnFe 2 O 4 , remains unclear. Here, we demonstrate simultaneous control of both stoichiometry and inversion disorder in the growth of ZnFe 2 O 4 single crystals, directly yielding a revised understanding of both the collective spin behavior and lattice symmetry. Crystals grown in the stoichiometric limit with minimal site inversion disorder contravene all the previously suggested exotic spin phases in ZnFe 2 O 4 . Furthermore, the structure is confirmed on the F$\bar{4}$3m space group with broken inversion symmetry that induces antiferroelectricity. The effective tuning of magnetic behavior by site disorder in the presence of robust antiferroelectricity makes ZnFe 2 O 4 of special interest to multiferroic devices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Color-Center Production and Formation in Electron-Irradiated Magnesium Aluminate Spinel and Ceria

Single crystals of magnesium aluminate spinel (MgAl2O4) with (100) or (110) orientations and cerium dioxide or ceria (CeO2) were irradiated by 1.0-MeV and 2.5-MeV electrons in a high fluence range. Point-defect production was studied by off-line UV-visible optical spectroscopy after irradiation. For spinel, regardless of both crystal orientation and electron energy, two characteristic broad bands centered at photon energies of 5.4 eV and 4.9 eV were assigned to F and F+ centers (neutral and singly-ionized oxygen vacancies), respectively, on the basis of available literature data. No clear differences in colour-centre formation were observed for the two crystal orientations. Using calculations of displacement cross sections by elastic collisions, these results are consistent with a very large threshold displacement energy (200 eV) for oxygen atoms at RT. A third very broad band centered at 3.7 eV might be attributed either to an oxygen hole center (V-type center) or an F2 dimer center (oxygen di-vacancy). The onset of recovery of these color centers took place at 200°C with almost full bleaching at 600°C. Activation energies (~0.3-0.4 eV) for defect recovery were deduced from the isochronal annealing data by using a first-order kinetics analysis. For ceria, a sub band-gap absorption feature peaked at ~3.1 eV was recorded for 2.5-MeV electron irradiation only. Assuming a ballistic process, we suggest that the latter defect might result from cerium atom displacement on the basis of computed cross sections.

36 MATERIALS SCIENCE↗

Structural phase transition in CuFe{sub 2}O{sub 4} spinel

A structural transition with a reduction in symmetry of the high temperature cubic phase (sp. gr. Fd3m) to the tetragonal phase (sp. gr. I4{sub 1}/amd) and the appearance of a ferrimagnetic structure occur in CuFe{sub 2}O{sub 4} copper ferrite at T Almost-Equal-To 440 Degree-Sign C. It is established by an experiment on a high-resolution neutron diffractometer that the temperature at which long-range magnetic order occurs is higher than that of tetragonal phase formation. When cooling CuFe{sub 2}O{sub 4} spinel from 500 Degree-Sign C, the equilibrium coexistence of both phases is observed in a fairly wide temperature range ({approx}40 Degree-Sign C). The composition studied is a completely inverse spinel in the cubic phase, and in the tetragonal phase the inversion parameter does not exceed few percent (x = 0.06 {+-} 0.04). At the same time, the phase formed upon cooling has a classical value of tetragonal distortion ({gamma} Almost-Equal-To 1.06). The character of temperature changes in the structural parameters during the transition from cubic to tetragonal phase indicates that this transition is based on the Jahn-Teller distortion of (Cu,Fe)O{sub 6} octahedra rather than the mutual migration of copper and iron atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗