Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spatial statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

PIPS: A Procedure for Interactive Pyramid Segmentation

The Procedure for Interactive Pyramid Segementation was designed to identify regions of spatially connected and spectrally homogeneous pixels in multispectral image data, and to allow these regions to be interactively manipulated without the use of processing parameters. The objective is to provide the user with the capability to easily extract and identify regions corresponding to target objects of interest. The approach is to segment a multispectral image into a set of regions and to allow the analyst to interactively refine the segmentation by direct manipulation. The user can elect to: interactively display maps of the spatial distribution of regions for any designated image subset; display the statistics of a given region; and label, merge, or split regions.

Wharton, S. W.↗

Evaluating the design of satellite scanning radiometers for earth radiation budget measurements with system simulations. Part 1: Instantaneous estimates

A set of system simulations was performed to evaluate candidate scanner configurations to fly as a part of the Earth Radiation Budget Instrument (ERBI) on the polar platforms during the 1990's. The simulation is considered of instantaneous sampling (without diurnal averaging) of the longwave and shortwave fluxes at the top of the atmosphere (TOA). After measurement and subsequent inversion to the TOA, the measured fluxes were compared to the reference fluxes for 2.5 deg lat/long resolution targets. The reference fluxes at this resolution are obtained by integrating over the 25 x 25 = 625 grid elements in each target. The differences between each of these two resultant spatially averaged sets of target measurements (errors) are taken and then statistically summarized. Five instruments are considered: (1) the Conically Scanning Radiometer (CSR); (2) the ERBE Cross Track Scanner; (3) the Nimbus-7 Biaxial Scanner; (4) the Clouds and Earth's Radiant Energy System Instrument (CERES-1); and (5) the Active Cavity Array (ACA). Identical studies of instantaneous error were completed for many days, two seasons, and several satellite equator crossing longitudes. The longwave flux errors were found to have the same space and time characteristics as for the shortwave fluxes, but the errors are only about 25 pct. of the shortwave errors.

Stowe, Larry↗

Total-sky and clear-sky variability of outgoing longwave radiation and shortwave radiation and its relation to cloud fluctuation statistics

Correlation statistics are used to investigate some of the characteristic temporal and spatial scales of the day-to-day changes in cloudiness which tend to dominate the variance of outgoing LW radiation and SW radiation fields. The temporal decorrelation time of the radiation field as measured by the lag time required for the autocorrelation of a region to fall to 0.4 is about 12 hours in the midlatitude storm track. Decorrelation time approaches one to two days when the averaging area of the region is increased significantly. Decorrelation times are also longer in the equatorial and tropical regions. The short decorrelation times are a manifestation of the creation, breakup, and movement of cloud systems. Cross-correlation analysis of the radiation field in the midlatitude storm track region and the subtropical dry zone shows advection speeds that range from about 25 m/sec in the storm tracks to about 8 m/sec in the subtropical dry zone.

Bess, T. D.↗

Imaging the 3.4-micron feature in Comet Levy (1990c)

The IRTF's ProtoCAM has been used to observe the organic emission feature peaking near 3.36 microns in Comet Levy. 2D images of the spatial distribution of the 3.4-micron organic emission exhibit brightness profiles statistically indistinguishable from that of the dust continuum, within 1225 of the cometary nucleus; this suggests a progenitor for the emission feature which is not a photodissociation fragment of some other species.

Klavetter, James J.↗

Factor analysis as a tool for spectral line component separation 21cm emission in the direction of L1780

The spectra of the 21cm HI radiation from the direction of L1780, a small high-galactic latitude dark/molecular cloud, were analyzed by multivariate methods. Factor analysis was performed on HI (21cm) spectra in order to separate the different components responsible for the spectral features. The rotated, orthogonal factors explain the spectra as a sum of radiation from the background (an extended HI emission layer), and from the L1780 dark cloud. The coefficients of the cloud-indicator factors were used to locate the HI 'halo' of the molecular cloud. Our statistically derived 'background' and 'cloud' spectral profiles, as well as the spatial distribution of the HI halo emission distribution were compared to the results of a previous study which used conventional methods analyzing nearly the same data set.

Toth, L. V.↗

Comparison of Surface Ground Temperature from Satellite Observations and the Off-Line Land Surface GEOS Assimilation System

The surface ground temperature (Tg) is an important meteorological variable, because it represents an integrated thermal state of the land surface determined by a complex surface energy budget. Furthermore, Tg affects both the surface sensible and latent heat fluxes. Through these fluxes. the surface budget is coupled with the atmosphere above. Accurate Tg data are useful for estimating the surface radiation budget and fluxes, as well as soil moisture. Tg is not included in conventional synoptical weather station reports. Currently, satellites provide Tg estimates globally. It is necessary to carefully consider appropriate methods of using these satellite data in a data assimilation system. Recently, an Off-line Land surface GEOS Assimilation (OLGA) system was implemented at the Data Assimilation Office at NASA-GSFC. One of the goals of OLGA is to assimilate satellite-derived Tg data. Prior to the Tg assimilation, a thorough investigation of satellite- and model-derived Tg, including error estimates, is required. In this study we examine the Tg from the n Project (ISCCP DI) data and the OLGA simulations. The ISCCP data used here are 3-hourly DI data (2.5x2.5 degree resolution) for 1992 summer months (June, July, and August) and winter months (January and February). The model Tg for the same periods were generated by OLGA. The forcing data for this OLGA 1992 simulation were generated from the GEOS-1 Data Assimilation System (DAS) at Data Assimilation Office NASA-GSFC. We examine the discrepancies between ISCCP and OLGA Tg with a focus on its spatial and temporal characteristics, particularly on the diurnal cycle. The error statistics in both data sets, including bias, will be estimated. The impact of surface properties, including vegetation cover and type, topography, etc, on the discrepancies will be addressed.

Yang, R.↗

Stratospheric Analysis and Forecasting in the Northern Winter of 1999/2000: The NASA DAO's GEOS-3 System

An evaluation is presented of the performance in the northern winter 1999/2000 of the GEOS-3 troposphere-stratosphere data assimilation system (DAS). The impacts of the two main input data types are assessed: upper-air soundings (sondes) provide wind and temperature information and satellite-based (Tiros Operational Vertical Sounders: TOVS) give estimates of the thermal structure. It is shown that in the low stratosphere (300-70hPa) the analyses are generally slightly warmer than the sonde data, but colder than the TOVS data; this relationship reverses between 70 and 10 hPa. There are geographical biases, related to the spatial and temporal coverage of the observation types and to the statistical weights assigned to them in the DAS. Forecasts show a tendency to reduce zonal asymmetries in the atmospheric flow and to suppress stratospheric temperature minima. In the DAS, the analysis increments compensate for this, but it leads to important biases in the multi-day forecasts. The analysis increments are as large as the diabatic forcing in the lower polar stratosphere, indicating a substantial model bias. The results provide important insights into the roles of different data types and the circulation model in producing accurate analyses for studies of polar chemistry and physical processes.

Pawson, Steven↗

Data Assimilation and Data Fusion for Planetary Atmospheres

The overarching goal of this Cooperative Agreement was to develop a model and procedures for the data assimilation of planetary spacecraft atmospheric observations. Data assimilation - in its application to weather analysis and prediction - is the process of finding an initial state of the meteorological variables (winds, temperatures, pressures, etc.) of an atmosphere, which, when propagated forward in time using a deterministic general circulation model, reproduces all of the available observations over that time to within the measurement and computational errors. With this definition, data assimilation is seen to be a natural extension of well-known least-squares minimization techniques. The primary complication arises from the scale of the problem: For the Martian atmosphere with the available nadir-viewing Thermal Emission Spectrometer data from Mars Global Surveyor, approximately 1,000,000 individual measurements of channel radiances (in the 15-micrometer region, where these radiances relate directly to the surface and atmospheric temperature) were made per day. A suitable general circulation model for dealing with this data set has on the order of 20,000 independent variables. After some spatial and temporal averaging of the data - which provides a necessary statistical estimate of the representativeness of the measurements, a crucial issue in data assimilation - the problem reduces in scale to the solution of approximately 50,000 equations for the 20,000 variables.

Houben, Howard↗

Computations of Complex Three-Dimensional Turbulent Free Jets

Three-dimensional, incompressible turbulent jets with rectangular and elliptical cross-sections are simulated with a finite-difference numerical method. The full Navier- Stokes equations are solved at low Reynolds numbers, whereas at high Reynolds numbers filtered forms of the equations are solved along with a sub-grid scale model to approximate the effects of the unresolved scales. A 2-N storage, third-order Runge-Kutta scheme is used for temporary discretization and a fourth-order compact scheme is used for spatial discretization. Although such methods are widely used in the simulation of compressible flows, the lack of an evolution equation for pressure or density presents particular difficulty in incompressible flows. The pressure-velocity coupling must be established indirectly. It is achieved, in this study, through a Poisson equation which is solved by a compact scheme of the same order of accuracy. The numerical formulation is validated and the dispersion and dissipation errors are documented by the solution of a wide range of benchmark problems. Three-dimensional computations are performed for different inlet conditions which model the naturally developing and forced jets. The experimentally observed phenomenon of axis-switching is captured in the numerical simulation, and it is confirmed through flow visualization that this is based on self-induction of the vorticity field. Statistical quantities such as mean velocity, mean pressure, two-point velocity spatial correlations and Reynolds stresses are presented. Detailed budgets of the mean momentum and Reynolds stresses are presented. Detailed budgets of the mean momentum and Reynolds stress equations are presented to aid in the turbulence modeling of complex jets. Simulations of circular jets are used to quantify the effect of the non-uniform curvature of the non-circular jets.

Wilson, Robert V.↗

Long-term Average Spectral and Spatial Distributions of Plasmaspheric Hiss Observed by the Akebono and IMAGE Satellites

The radiation belt slot region is known to result from losses of energetic electrons by enhanced pitch-angle scattering by whistler mode waves associated with plasmaspheric hiss emission. The distributions of whistler mode waves in the slot L range are therefore important for understanding the electron radiation belt. The sources and distributions of the waves are, however, still controversial. In the present study, using the Akebono/MCA data [1989-20051 and the IMAGE/RPI data [2000-20051, we have constructed the average plasmaspheric hiss spectral distributions over a broad frequency range. In addition, we have investigated the spatial distributions of plasmaspheric hiss with the wave map technique [Green et a1.(2005)]. Our study shows that the broadband plasmaspheric hiss are distributed in the frequency range of 100Hz to several kHz, and exhibit a broad intensive peak. The frequency of the intensity peak tends to increase with magnetic latitude. The frequencies of the most intense waves in the nominal slot L range (2<3) during quiet times (Dst>-50nT) are found to be between 300Hz and 600Hz on average. During high storm activity (Dst <-150nT), however, the peak frequencies become slightly lower. The intensity of plasmaspheric hiss clearly depends on substorm activity as measured by the AE index, consistent with Meredith et a1.(2004). The hiss wave intensity maps also show a strong local time asymmetry. The large amplitude waves are observed at 6:OO-19:OO MLT. From our extensive analysis, we have also found an L dependence of hiss activity, with the larger amplitude waves being observed at lower L during substorm active conditions. The same tendency can be found for solar activity. The average intensities of the waves during 1989-1991 and 2000-2001 are a few dB larger than those during 1992-1997 and 2005. The most intense waves are observed at lower L during high solar activity. The statistical study on spectrum features of the plasmaspheric hiss together with the spatial distribution show clear dependences of storm, substorm and solar activities.

Fung, Shing↗

Scale Dependence of Multiplier Distributions for Particle Concentration, Enstrophy, and Dissipation in the Inertial Range of Homogeneous Turbulence

Turbulent flows preferentially concentrate inertial particles depending on their stopping time or Stokes number, which can lead to significant spatial variations in the particle concentration. Cascade models are one way to describe this process in statistical terms. Here, we use a direct numerical simulation (DNS) dataset of homogeneous, isotropic turbulence to determine probability distribution functions (PDFs) for cascade multipliers, which determine the ratio by which a property is partitioned into subvolumes as an eddy is envisioned to decay into smaller eddies. We present a technique for correcting effects of small particle numbers in the statistics. We determine multiplier PDFs for particle number, flow dissipation, and enstrophy, all of which are shown to be scale dependent. However, the particle multiplier PDFs collapse when scaled with an appropriately defined local Stokes number. As anticipated from earlier works, dissipation and enstrophy multiplier PDFs reach an asymptote for sufficiently small spatial scales. From the DNS measurements, we derive a cascade model that is used it to make predictions for the radial distribution function (RDF) for arbitrarily high Reynolds numbers, Re, finding good agreement with the asymptotic, infinite Re inertial range theory of Zaichik and Alipchenkov [New J. Phys. 11, 103018 (2009)]. We discuss implications of these results for the statistical modeling of the turbulent clustering process in the inertial range for high Reynolds numbers inaccessible to numerical simulations.

turbulent flows↗

Effective Assimilation of SMAP Observations Using Statistical Techniques

Statistical techniques permit the retrieval of soil moisture estimates in a model climatology while retaining the spatial and temporal signatures of the satellite observations. As a consequence, the need for bias correction prior to an assimilation of these estimates is reduced, which could result in a more effective use of the independent information provided by the satellite observations. In this study, a statistical neural network (NN) retrieval algorithm is calibrated using SMAP brightness temperature observations and modeled soil moisture estimates (similar to those used to calibrate the SMAP Level 4 DA system). Daily values of surface soil moisture are estimated using the NN and then assimilated into the NASA Catchment model. The skill of the assimilation estimates is assessed based on a comprehensive comparison to in situ measurements from the SMAP core and sparse network sites as well as the International Soil Moisture Network. The NN retrieval assimilation is found to significantly improve the model skill, particularly in areas where the model does not represent processes related to agricultural practices. Additionally, the NN method is compared to assimilation experiments using traditional bias correction techniques. The NN retrieval assimilation is found to more effectively use the independent information provided by SMAP resulting in larger model skill improvements than assimilation experiments using traditional bias correction techniques.

Kolassa, J.↗

The ERTS-1 investigation (ER-600). Volume 6: ERTS-1 signature extension analysis, July 1972 - June 1973

Feature classification, spatially and temporally, was extended over the Houston test site area. The Earth Resources Technology Satellite (ERTS-1) multispectral scanner data from August, September, and October 1972, of five widely separated lakes were used as statistical training fields and test sites. Short term temporal (same day to 36 days) and moderately long term spatial (within and between three ERTS multispectral scanner frames) signature extensions have been verified with respect to large relatively homogeneous features. The most significant feature dependent variable affecting spatial and short term extension was water turbidity. Long term signature extension will require a model to compensate or modify the ERTS-1 multispectral scanner data for significant sun angle changes. The presence of atmospheric haze changed the absolute signature but always by approximately the same amount so that the measured water signature was always the same. The normally occurring variations in atmospheric haze conditions had no major effect on the water signatures in this study.

Erb, R. B.↗

It's the Heat AND the Humidity -- Assessment of Extreme Heat Scenarios to Enable the Assessment of Climate Impacts on Public Health

In the United States, extreme heat is the most deadly weather-related hazard. In the face of a warming climate and urbanization, which contributes to local-scale urban heat islands, it is very likely that extreme heat events (EHEs) will become more common and more severe in the U.S. In a NASA-funded project supporting the National Climate Assessment, we are providing historical and future measures of extreme heat to enable assessments of the impacts of heat on public health over the coterminous U.S. We use atmospheric temperature and humidity information from meteorological reanalysis and from Global Climate Models (GCMs) to provide data on past and future heat events. The project s emphasis is on providing assessments of the magnitude, frequency and geographic distribution of extreme heat in the U.S. to facilitate public health studies. In our approach, long-term climate change is captured with GCM output, and the temporal and spatial characteristics of short-term extremes are represented by the reanalysis data. Two future time horizons, 2040 and 2090, are the focus of future assessments; these are compared to the recent past period of 1981-2000. We are characterizing regional-scale temperature and humidity conditions using GCM output for two climate change scenarios (A2 and A1B) defined in the Special Report on Emissions Scenarios (SRES). For each future period, 20 years of multi-model GCM output have been analyzed to develop a heat stress climatology based on statistics of extreme heat indicators. Differences between the two future and past periods have been used to define temperature and humidity changes on a monthly time scale and regional spatial scale. These changes, combined with hourly historical meteorological data at a spatial scale (12 km) much finer than that of GCMs, enable us to create future climate realizations, from which we compute the daily heat stress measures and related spatially-specific climatological fields. These include the mean annual number of days above certain thresholds of maximum and minimum air temperatures, heat indices and a new heat stress variable that gives an integrated measure of heat stress (and relief) over the course of a day. Comparisons are made between projected (2040 and 2090) and past (1990) heat stress statistics. All output is being provided at the 12 km spatial scale and will also be aggregated to the county level, which is a popular scale of analysis for public health researchers. County-level statistics will be made available by our collaborators at the Centers for Disease Control and Prevention (CDC) via the Wide-ranging Online Data for Epidemiologic Research (WONDER) system. CDC WONDER makes the information resources of the CDC available to public health professionals and the general public. This addition of heat stress measures to CDC WONDER will allow decision and policy makers to assess the impact of alternative approaches to optimize the public health response to EHEs. It will also allow public health researchers and policy makers to better include such heat stress measures in the context of national health data available in the CDC WONDER system. The users will be able to spatially and temporally query public health and heat-related data sets and create county-level maps and statistical charts of such data across the coterminous U.S.

Crosson, William L↗

Comparison of the CALIPSO Level 3 Ice Cloud Product with the DARDAR and 2C-ICE products

Understanding the vertical distribution of ice clouds is crucial for climate modeling and weather forecasting. Since its launch to space in 2006, the Cloud-Aerosol Lidar with Orthogonal Polarization instrument (CALIOP) onboard the CALIPSO spacecraft has been providing unprecedented high-quality profiles of ice clouds, especially optically thin cirrus clouds, during both day and night, on a global scale. Recently the lidar science working group at the NASA Langley Research Center delivered a level 3 (L3) ice cloud product which reports monthly statistics of ice cloud extinction coefficient and ice water content on a uniform 3-dimensional spatial grid. This presentation compares the ice cloud climatology derived from this product with two other ice cloud products, namely the raDAR/liDAR(DARDAR) ice cloud product and the CloudSat-CALIPSO Ice Cloud Property Product (2C-ICE). Using processing similar to the CALIPSO L3 product, granules of DARDAR and 2C-ICE data have been processed into monthly statistics for a better comparison. Similarities and differences will be presented and discussed. The findings illustrate the strengths of the different products and help to identify which product might be most appropriate for a given research topic.

Xia Cai↗

Ocean waves

Ocean wave data can be obtained from such active microwave probe techniques as monostatic HF and VHF, bistatic HF, HF synthetic aperture radar, altimeters, satellite and airborne synthetic aperture radar, carrier wave or pulsed dual-frequency radars, and coastal surveillance radar. Approaches to texture analysis of ocean wave imagery are discussed, with attention given to transform techniques or spatial frequency analysis, and the analysis of second-order gray level statistics. In addition, recommendations are made for further work on the modulation of short gravity waves by longer waves as a function of wind speed and wave direction, and the derivation of transfer functions for the ocean response of dual-frequency radars.

Bartsch, N.↗

Shuttle applications in tropospheric air quality observations

The role which might be played by the space shuttle in obtaining data which describes the air quality of the north-eastern United States was investigated. The data requirements of users, a model for statistical interpretation of the observations, the influence of orbit parameters on the spatial and temporal sampling and an example of application of the the model were considered.

Friedman, E.↗

Cloud fluctuation statistics

A space-time statistical analysis of total outgoing infrared radiation is used to determine the gross features of day-to-day cloudiness fluctuations over the Pacific Ocean in summer and winter. IR fluctuations arise from the passage of cloudiness systems through a grid box as well as the creation and destruction of cloudiness in the box. Which process dominates depends upon the size of the box relative to the size, speed and persistence time of a typical cloudiness system. In most regions the statistical analysis yields advection speeds characteristic of 700 mb mean flow with spatial dependence resembling the 300 mb mean flow. Spatial scales less than 2000 km predominate, smaller scales having less persistence. Characteristic time scales are on the order of one or two days, even for a grid box spanning the entire North Pacific storm track. This result is remarkable in view of the much longer time scales commonly associated with atmospheric disturbances. Apparently many cloudiness systems are created and destroyed during the lifetime of a single disturbance.

Cahalan, R. F.↗