SEARCH · Engineering Papers

Results for “Software development tools”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Software engineering methodologies and tools

Over the years many engineering disciplines have developed, including chemical, electronic, etc. Common to all engineering disciplines is the use of rigor, models, metrics, and predefined methodologies. Recently, a new engineering discipline has appeared on the scene, called software engineering. For over thirty years computer software has been developed and the track record has not been good. Software development projects often miss schedules, are over budget, do not give the user what is wanted, and produce defects. One estimate is there are one to three defects per 1000 lines of deployed code. More and more systems are requiring larger and more complex software for support. As this requirement grows, the software development problems grow exponentially. It is believed that software quality can be improved by applying engineering principles. Another compelling reason to bring the engineering disciplines to software development is productivity. It has been estimated that productivity of producing software has only increased one to two percent a year in the last thirty years. Ironically, the computer and its software have contributed significantly to the industry-wide productivity, but computer professionals have done a poor job of using the computer to do their job. Engineering disciplines and methodologies are now emerging supported by software tools that address the problems of software development. This paper addresses some of the current software engineering methodologies as a backdrop for the general evaluation of computer assisted software engineering (CASE) tools from actual installation of and experimentation with some specific tools.

Wilcox, Lawrence M.↗

NASA NTRS1992

Survey - Applications of structural optimization methods to fixed wing aircraft and spacecraft

Results of a technical survey of the practical applications of structural optimization methods in the U.S. aerospace industry through 1980s are summarized. One of the most important developments in the 80s is the more widespread acceptance of structural optimization as one of the design tools that support practical structural design. Another significant advance is the development of large software tools for production applications. Attention is also given to the tailoring of the computerized design process to the specific environment of each company. The two most important aspects of this tailoring are seamless and easy-to-use incorporation of structural optimization in the overall aerospace design/production process and multidisciplinary integration aimed at ultimate performance optimization of the final product. Some specific applications discussed include the X-29 forward swept wing demonstrator aircraft, composite wing and vertical tail program, fighter wing redesign evaluations, high speed aircraft design, and space structures.

Miura, Hirokazu↗

DOE OSTI2014

BEopt-CA (Ex): A Tool for Optimal Integration of EE, DR and PV in Existing California Homes

This project targeted the development of a software tool, BEopt-CA (Ex) (Building Energy Optimization Tool for California Existing Homes), that aims to facilitate balanced integration of energy efficiency (EE), demand response (DR), and photovoltaics (PV) in the residential retrofit1 market. The intent is to provide utility program managers and contractors in the EE/DR/PV marketplace with a means of balancing the integration of EE, DR, and PV.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

NASA NTRS2010

Development of a User Interface for a Regression Analysis Software Tool

An easy-to -use user interface was implemented in a highly automated regression analysis tool. The user interface was developed from the start to run on computers that use the Windows, Macintosh, Linux, or UNIX operating system. Many user interface features were specifically designed such that a novice or inexperienced user can apply the regression analysis tool with confidence. Therefore, the user interface s design minimizes interactive input from the user. In addition, reasonable default combinations are assigned to those analysis settings that influence the outcome of the regression analysis. These default combinations will lead to a successful regression analysis result for most experimental data sets. The user interface comes in two versions. The text user interface version is used for the ongoing development of the regression analysis tool. The official release of the regression analysis tool, on the other hand, has a graphical user interface that is more efficient to use. This graphical user interface displays all input file names, output file names, and analysis settings for a specific software application mode on a single screen which makes it easier to generate reliable analysis results and to perform input parameter studies. An object-oriented approach was used for the development of the graphical user interface. This choice keeps future software maintenance costs to a reasonable limit. Examples of both the text user interface and graphical user interface are discussed in order to illustrate the user interface s overall design approach.

Ulbrich, Norbert Manfred↗

NASA NTRS2012

Generating Ground Reference Data for a Global Impervious Surface Survey

We are engaged in a project to produce a 30m impervious cover data set of the entire Earth for the years 2000 and 2010 based on the Landsat Global Land Survey (GLS) data set. The GLS data from Landsat provide an unprecedented opportunity to map global urbanization at this resolution for the first time, with unprecedented detail and accuracy. Moreover, the spatial resolution of Landsat is absolutely essential to accurately resolve urban targets such as buildings, roads and parking lots. Finally, with GLS data available for the 1975, 1990, 2000, and 2005 time periods, and soon for the 2010 period, the land cover/use changes due to urbanization can now be quantified at this spatial scale as well. Our approach works across spatial scales using very high spatial resolution commercial satellite data to both produce and evaluate continental scale products at the 30m spatial resolution of Landsat data. We are developing continental scale training data at 1m or so resolution and aggregating these to 30m for training a regression tree algorithm. Because the quality of the input training data are critical, we have developed an interactive software tool, called HSegLearn, to facilitate the photo-interpretation of high resolution imagery data, such as Quickbird or Ikonos data, into an impervious versus non-impervious map. Previous work has shown that photo-interpretation of high resolution data at 1 meter resolution will generate an accurate 30m resolution ground reference when coarsened to that resolution. Since this process can be very time consuming when using standard clustering classification algorithms, we are looking at image segmentation as a potential avenue to not only improve the training process but also provide a semi-automated approach for generating the ground reference data. HSegLearn takes as its input a hierarchical set of image segmentations produced by the HSeg image segmentation program [1, 2]. HSegLearn lets an analyst specify pixel locations as being either positive or negative examples, and displays a classification of the study area based on these examples. For our study, the positive examples are examples of impervious surfaces and negative examples are examples of non-impervious surfaces. HSegLearn searches the hierarchical segmentation from HSeg for the coarsest level of segmentation at which selected positive example locations do not conflict with negative example locations and labels the image accordingly. The negative example regions are always defined at the finest level of segmentation detail. The resulting classification map can be then further edited at a region object level using the previously developed HSegViewer tool [3]. After providing an overview of the HSeg image segmentation program, we provide a detailed description of the HSegLearn software tool. We then give examples of using HSegLearn to generate ground reference data and conclude with comments on the effectiveness of the HSegLearn tool.

Tilton, James C.↗

NASA NTRS1983

An approach to software baseline generation

A current Data & Analysis Center for Software (DACS) effort to develop software baselines is summarized. This baseline effort is an on-going activity; that is, the baselines are meant to be updated as new software data becomes available. The information presented and processed was organized to make periodic updating a much simpler task. A baseline, for this effort, consists of an estimation of any characteristic of a software project that is helpful to a developer, manager, or monitor to manage, control, or influence a software product. The objective of these baselines is to provide a tool for aiding software developers in their daily work. Baselines were synthesized from an empirical dataset provided by the Software Engineering Laboratory at NASA Goddard Space Flight Center (NASA/SEL). These data were selected because the data collection effort developed at the NASA/SEL is the most thorough and complete available.

Romeu, J. L.↗

NASA NTRS2019

Software Development and Testing Support for the Avionics Systems Telemetry Tool Suite

The Customer Avionics Interface Development and Analysis (CAIDA) team provides modeling and simulation software for the verification of the Launch Control System (LCS). In late 2015, CAIDA began development of the Data Exchange Message (DEM) Generator (DEMGen) and development of the DEM Modifier (DEMMod) in early 2017. DEMGen is able to mimic the telemetry streams normally sent by different simulators allowing increased user control and more telemetry instances. DEMMod takes in a telemetry stream and allows the modification of entire packets or simple measurement values. Together, these tools provide the capabilities to simulate and test complex launch scenarios to ensure LCS is fully prepared for any anomalous behavior during an actual launch. In early 2018, CAIDA began a new project called the CAIDA Advanced Telemetry Tool (CATT), which combined the code and documentation of DEMGen and DEMMod. CATT now allows the integration of new tools into a singular program providing compact and easy access. In the fall of 2018, the author worked with another intern, Antonio Negron, to develop several new CATT features along with proper documentation and unit testing. In the following spring, the author continued that work by integrating the features into CATT, solidifying the documentation, and expanding the testing to cover more cases. The outcome of both semesters includes an inspection engine for automated packet analysis, a packet-masking feature, and a multi-measurement sequencing feature.

Thomas, Taylor Walter↗

DOE OSTI2021

Toward 3D data visualization using virtual reality tools

Virtual Reality (VR) offers the opportunity to display data, instrumentation, and experimental setups in three dimensions and gives the user the ability to interact with the objects. This technology moves visualization beyond two-dimensional projections on a flat screen with a fixed field of view in which a keyboard or another similar controller is needed to change the view. Advances in both hardware and software for VR make it possible for the non-expert to develop visualization tools for scientific applications both for viewing and for sharing data or diagnostic hardware between users in three dimensions. Furthermore, this manuscript describes application development using two VR software tools, Unity gaming engine and A-frame, for visualizing data and high energy physics targets.

47 OTHER INSTRUMENTATION↗

NASA NTRS2001

Development of a Space Radiation Monte-Carlo Computer Simulation Based on the FLUKE and Root Codes

The radiation environment in space is a complex problem to model. Trying to extrapolate the projections of that environment into all areas of the internal spacecraft geometry is even more daunting. With the support of our CERN colleagues, our research group in Houston is embarking on a project to develop a radiation transport tool that is tailored to the problem of taking the external radiation flux incident on any particular spacecraft and simulating the evolution of that flux through a geometrically accurate model of the spacecraft material. The output will be a prediction of the detailed nature of the resulting internal radiation environment within the spacecraft as well as its secondary albedo. Beyond doing the physics transport of the incident flux, the software tool we are developing will provide a self-contained stand-alone object-oriented analysis and visualization infrastructure. It will also include a graphical user interface and a set of input tools to facilitate the simulation of space missions in terms of nominal radiation models and mission trajectory profiles. The goal of this project is to produce a code that is considerably more accurate and user-friendly than existing Monte-Carlo-based tools for the evaluation of the space radiation environment. Furthermore, the code will be an essential complement to the currently existing analytic codes in the BRYNTRN/HZETRN family for the evaluation of radiation shielding. The code will be directly applicable to the simulation of environments in low earth orbit, on the lunar surface, on planetary surfaces (including the Earth) and in the interplanetary medium such as on a transit to Mars (and even in the interstellar medium). The software will include modules whose underlying physics base can continue to be enhanced and updated for physics content, as future data become available beyond the timeframe of the initial development now foreseen. This future maintenance will be available from the authors of FLUKA as part of their continuing efforts to support the users of the FLUKA code within the particle physics community. In keeping with the spirit of developing an evolving physics code, we are planning as part of this project, to participate in the efforts to validate the core FLUKA physics in ground-based accelerator test runs. The emphasis of these test runs will be the physics of greatest interest in the simulation of the space radiation environment. Such a tool will be of great value to planners, designers and operators of future space missions, as well as for the design of the vehicles and habitats to be used on such missions. It will also be of aid to future experiments of various kinds that may be affected at some level by the ambient radiation environment, or in the analysis of hybrid experiment designs that have been discussed for space-based astronomy and astrophysics. The tool will be of value to the Life Sciences personnel involved in the prediction and measurement of radiation doses experienced by the crewmembers on such missions. In addition, the tool will be of great use to the planners of experiments to measure and evaluate the space radiation environment itself. It can likewise be useful in the analysis of safe havens, hazard migration plans, and NASA's call for new research in composites and to NASA engineers modeling the radiation exposure of electronic circuits. This code will provide an important complimentary check on the predictions of analytic codes such as BRYNTRN/HZETRN that are presently used for many similar applications, and which have shortcomings that are more easily overcome with Monte Carlo type simulations. Finally, it is acknowledged that there are similar efforts based around the use of the GEANT4 Monte-Carlo transport code currently under development at CERN. It is our intention to make our software modular and sufficiently flexible to allow the parallel use of either FLUKA or GEANT4 as the physics transport engine.

Pinsky, L. S.↗

NASA NTRS2008

Advanced Diagnostic and Prognostic Testbed (ADAPT) Testability Analysis Report

As system designs become more complex, determining the best locations to add sensors and test points for the purpose of testing and monitoring these designs becomes more difficult. Not only must the designer take into consideration all real and potential faults of the system, he or she must also find efficient ways of detecting and isolating those faults. Because sensors and cabling take up valuable space and weight on a system, and given constraints on bandwidth and power, it is even more difficult to add sensors into these complex designs after the design has been completed. As a result, a number of software tools have been developed to assist the system designer in proper placement of these sensors during the system design phase of a project. One of the key functions provided by many of these software programs is a testability analysis of the system essentially an evaluation of how observable the system behavior is using available tests. During the design phase, testability metrics can help guide the designer in improving the inherent testability of the design. This may include adding, removing, or modifying tests; breaking up feedback loops, or changing the system to reduce fault propagation. Given a set of test requirements, the analysis can also help to verify that the system will meet those requirements. Of course, a testability analysis requires that a software model of the physical system is available. For the analysis to be most effective in guiding system design, this model should ideally be constructed in parallel with these efforts. The purpose of this paper is to present the final testability results of the Advanced Diagnostic and Prognostic Testbed (ADAPT) after the system model was completed. The tool chosen to build the model and to perform the testability analysis with is the Testability Engineering and Maintenance System Designer (TEAMS-Designer). The TEAMS toolset is intended to be a solution to span all phases of the system, from design and development through health management and maintenance. TEAMS-Designer is the model-building and testability analysis software in that suite.

Ossenfort, John↗

DOE OSTI2022

Market Research Study: Applications of ASCR HPC Software

The Department of Energy (DOE)’s Advanced Scientific Computing Research (ASCR) program has developed hundreds of software tools for high performance computing (HPC). Although many HPC hardware advances have permeated the market, such as CPUs, GPUs, TPUs and ASICs, the software developed by DOE for different HPC applications has not necessarily been mined. The DOE is interested in making its HPC software portfolio available to the public in order to maximize the value of what has been developed.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2019

Energy Modeling in Urban Districts: Forecast of Multi-Sector Energy Use and GHG Emissions

This document reports the findings of the energy use and greenhouse gases (GHG) emissions model loosely based on three districts in the San Francisco Bay Area, District A, District B, and District C. Modeling platforms exist for city energy benchmarking, inventorying, and GHG emissions forecasting and planning. However, the wide variety and features of today’s tools, their focus on a sub-set or snapshot data from various energy generation and consumption sectors, and the fact that many of them are not open data models, create sub-optimal environments for the energy analysis districts are seeking to conduct. Hence, we have developed a new software tool with customized data and dynamic visualization; DEPICT (Decision-support and Emissions Prediction Interactive Cities Tool) to obtain energy and emissions forecasts at different stages of the districts’ build-out by varying selected design parameters. This report presents the methodology and framework we have developed to estimate whole district emissions and details the results by district, with the objective of finding insights into the main sources of emissions, and the available levers to reduce them efficiently. This document details the impact of each emissions mitigation measure investigated, along with the assumption and models that were used to reach these values

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

NASA NTRS2008

Remote-Sensing Time Series Analysis, a Vegetation Monitoring Tool

The Time Series Product Tool (TSPT) is software, developed in MATLAB , which creates and displays high signal-to- noise Vegetation Indices imagery and other higher-level products derived from remotely sensed data. This tool enables automated, rapid, large-scale regional surveillance of crops, forests, and other vegetation. TSPT temporally processes high-revisit-rate satellite imagery produced by the Moderate Resolution Imaging Spectroradiometer (MODIS) and by other remote-sensing systems. Although MODIS imagery is acquired daily, cloudiness and other sources of noise can greatly reduce the effective temporal resolution. To improve cloud statistics, the TSPT combines MODIS data from multiple satellites (Aqua and Terra). The TSPT produces MODIS products as single time-frame and multitemporal change images, as time-series plots at a selected location, or as temporally processed image videos. Using the TSPT program, MODIS metadata is used to remove and/or correct bad and suspect data. Bad pixel removal, multiple satellite data fusion, and temporal processing techniques create high-quality plots and animated image video sequences that depict changes in vegetation greenness. This tool provides several temporal processing options not found in other comparable imaging software tools. Because the framework to generate and use other algorithms is established, small modifications to this tool will enable the use of a large range of remotely sensed data types. An effective remote-sensing crop monitoring system must be able to detect subtle changes in plant health in the earliest stages, before the effects of a disease outbreak or other adverse environmental conditions can become widespread and devastating. The integration of the time series analysis tool with ground-based information, soil types, crop types, meteorological data, and crop growth models in a Geographic Information System, could provide the foundation for a large-area crop-surveillance system that could identify a variety of plant phenomena and improve monitoring capabilities.

McKellip, Rodney↗

NASA NTRS1984

Some mathematical tools for a modeller's workbench

The development of a mathematical software tools in workbench environment to model related objects more straightforward is outlined. A computer model from informal drawings and a plastic model of a helicopter is discussed. Lofting was the predominant, characteristic modelling technique. Ships and airplane designs use lofting as a technique because they have defined surfaces, (hulls and fuselages) from vertical station cuts perpendicular to the vertical center plane defining the major axis of reflective symmetry. A turbine blade from a jet engine was modelled in this way. The aerodynamic portion and the root comes from different paradigms. The union of these two parts into a coherent model is shown.

Cohen, E.↗

NASA NTRS1994

Activity Catalog Tool (ACT) user manual, version 2.0

This report comprises the user manual for version 2.0 of the Activity Catalog Tool (ACT) software program, developed by Leon D. Segal and Anthony D. Andre in cooperation with NASA Ames Aerospace Human Factors Research Division, FLR branch. ACT is a software tool for recording and analyzing sequences of activity over time that runs on the Macintosh platform. It was designed as an aid for professionals who are interested in observing and understanding human behavior in field settings, or from video or audio recordings of the same. Specifically, the program is aimed at two primary areas of interest: human-machine interactions and interactions between humans. The program provides a means by which an observer can record an observed sequence of events, logging such parameters as frequency and duration of particular events. The program goes further by providing the user with a quantified description of the observed sequence, through application of a basic set of statistical routines, and enables merging and appending of several files and more extensive analysis of the resultant data.

Segal, Leon D.↗

DOE OSTI2021

KBase partners with community developers from several Department of Energy Science Focus Areas to increase functionality of tools and analysis

Several SFAs were selected for training on the KBase Software Development Kit (SDK) to integrate tools and data into the KBase platform. Overall, the collaborative effort was viewed as highly successful. Every SFA project was able to achieve their proposed targets for training and functionality, while also gaining an appreciation for the role KBase plays/could play in their future science plans. Both the SFA and KBase teams felt that continued collaboration would be beneficial, especially if the programs were able to jointly prioritize scope and readiness of future projects. This poster will outline the scope of functionality added by SFA community developers, and highlight points of intersection across these efforts.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Development and Implementation of a New AI-Based Tool to Support Fast Reactor Software Model Generation and Validation

This report summarizes FY26 work to develop Maggie, an artificial intelligence-based assistant designed to support software model generation and validation activities for fast reactor analysis codes. The project established a modular, code-agnostic software architecture that separates reusable agent capabilities from code-specific knowledge and tools, with initial implementation focused on the FRP-supported fast reactor safety analysis code SAS4A/SASSYS1 (SAS). A curated SAS-specific knowledge base was assembled from the code manual, training materials, historical analysis reports, and representative input files, and was integrated through retrieval-augmented generation to ground Maggie’s responses in authoritative sources. Maggie was deployed on the internal Argonne network, where it demonstrated practical user-facing capability as a chatbot for answering natural language questions about SAS and retrieving relevant technical information. Demonstration cases also showed that Maggie can generate useful snippets of SAS input for selected modeling tasks, while highlighting current limitations in reliability and consistency for more complex input generation tasks. Overall, the FY26 effort established the technical foundation for an AI-assisted capability intended to improve the efficiency, consistency, and accessibility of fast reactor software model development at Argonne and, with further improvements, to support eventual use by the broader fast reactor community, including industry users of FRP-supported analysis tools.

Thomas, Rachel [Argonne National Laboratory (ANL),↗

NASA NTRS2010

The Waypoint Planning Tool: Real Time Flight Planning for Airborne Science

NASA Earth science research utilizes both spaceborne and airborne real time observations in the planning and operations of its field campaigns. The coordination of air and space components is critical to achieve the goals and objectives and ensure the success of an experiment. Spaceborne imagery provides regular and continual coverage of the Earth and it is a significant component in all NASA field experiments. Real time visible and infrared geostationary images from GOES satellites and multi-spectral data from the many elements of the NASA suite of instruments aboard the TRMM, Terra, Aqua, Aura, and other NASA satellites have become norm. Similarly, the NASA Airborne Science Program draws upon a rich pool of instrumented aircraft. The NASA McDonnell Douglas DC-8, Lockheed P3 Orion, DeHavilland Twin Otter, King Air B200, Gulfstream-III are all staples of a NASA's well-stocked, versatile hangar. A key component in many field campaigns is coordinating the aircraft with satellite overpasses, other airplanes and the constantly evolving, dynamic weather conditions. Given the variables involved, developing a good flight plan that meets the objectives of the field experiment can be a challenging and time consuming task. Planning a research aircraft mission within the context of meeting the science objectives is complex task because it is much more than flying from point A to B. Flight plans typically consist of flying a series of transects or involve dynamic path changes when "chasing" a hurricane or forest fire. These aircraft flight plans are typically designed by the mission scientists then verified and implemented by the navigator or pilot. Flight planning can be an arduous task requiring frequent sanity checks by the flight crew. This requires real time situational awareness of the weather conditions that affect the aircraft track. Scientists at the University of Alabama-Huntsville and the NASA Marshall Space Flight Center developed the Waypoint Planning Tool, an interactive software tool, that enables scientists to develop their own flight plans (also known as waypoints) with point-and-click mouse capabilities on a digital map draped with real time satellite imagery. The Waypoint Planning Tool has further advanced to include satellite orbit predictions and seamlessly interfaces with the Real Time Mission Monitor which tracks the aircraft s position when the planes are flying. This presentation will describe the capabilities and features of the Waypoint Planning Tool highlighting the real time aspect, interactive nature and the resultant benefits to the airborne science community.

He, Yubin↗