Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Slow light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Lunar Impact Flash Locations from NASA's Lunar Impact Monitoring Program

Meteoroids are small, natural bodies traveling through space, fragments from comets, asteroids, and impact debris from planets. Unlike the Earth, which has an atmosphere that slows, ablates, and disintegrates most meteoroids before they reach the ground, the Moon has little-to-no atmosphere to prevent meteoroids from impacting the lunar surface. Upon impact, the meteoroid's kinetic energy is partitioned into crater excavation, seismic wave production, and the generation of a debris plume. A flash of light associated with the plume is detectable by instruments on Earth. Following the initial observation of a probable Taurid impact flash on the Moon in November 2005,1 the NASA Meteoroid Environment Office (MEO) began a routine monitoring program to observe the Moon for meteoroid impact flashes in early 2006, resulting in the observation of over 330 impacts to date. The main objective of the MEO is to characterize the meteoroid environment for application to spacecraft engineering and operations. The Lunar Impact Monitoring Program provides information about the meteoroid flux in near-Earth space in a size range-tens of grams to a few kilograms-difficult to measure with statistical significance by other means. A bright impact flash detected by the program in March 2013 brought into focus the importance of determining the impact flash location. Prior to this time, the location was estimated to the nearest half-degree by visually comparing the impact imagery to maps of the Moon. Better accuracy was not needed because meteoroid flux calculations did not require high-accuracy impact locations. But such a bright event was thought to have produced a fresh crater detectable from lunar orbit by the NASA spacecraft Lunar Reconnaissance Orbiter (LRO). The idea of linking the observation of an impact flash with its crater was an appealing one, as it would validate NASA photometric calculations and crater scaling laws developed from hypervelocity gun testing. This idea was dependent upon LRO finding a fresh impact crater associated with one of the impact flashes recorded by Earth-based instruments, either the bright event of March 2013 or any other in the database of impact observations. To find the crater, LRO needed an accurate area to search. This Technical Memorandum (TM) describes the geolocation technique developed to accurately determine the impact flash location, and by association, the location of the crater, thought to lie directly beneath the brightest portion of the flash. The workflow and software tools used to geolocate the impact flashes are described in detail, along with sources of error and uncertainty and a case study applying the workflow to the bright impact flash in March 2013. Following the successful geolocation of the March 2013 flash, the technique was applied to all impact flashes detected by the MEO between November 7, 2005, and January 3, 2014.

Moser, D. E.↗

Signature of a Massive Rotating Metal-poor Star Imprinted in the Phoenix Stellar Stream

The Phoenix stellar stream has a low intrinsic dispersion in velocity and metallicity that implies the progenitor was probably a low-mass globular cluster. In this work we use Magellan/Magellan Inamori Kyocera Echelle (MIKE) high-dispersion spectroscopy of eight Phoenix stream red giants to confirm this scenario. In particular, we find negligible intrinsic scatter in metallicity ($σ$([FE II/H]) = ${0.04}_{-0.03}^{+0.11}$) and a large peak-to-peak range in [Na/Fe] and [Al/Fe] abundance ratios, consistent with the light element abundance patterns seen in the most metal-poor globular clusters. However, unlike any other globular cluster, we also find an intrinsic spread in [Sr II/Fe] spanning ~1 dex, while [Ba II/Fe] shows nearly no intrinsic spread ($σ$([Ba II/H]) = ${0.03}_{-0.02}^{+0.10}$). This abundance signature is best interpreted as slow-neutron-capture element production from a massive fast-rotating metal-poor star (15–20 $M$ ⊙ , $v$ ini /$v$ crit = 0.4, [Fe/H] = -3.8). The low inferred cluster mass suggests the system would have been unable to retain supernovae ejecta, implying that any massive fast-rotating metal-poor star that enriched the interstellar medium must have formed and evolved before the globular cluster formed. Furthermore, neutron-capture element production from asymptotic giant branch stars or magneto-rotational instabilities in core-collapse supernovae provide poor fits to the observations. We also report one Phoenix stream star to be a lithium-rich giant ($A$(Li) = 3.1 ± 0.1). At [Fe/H ] = -2.93; it is among the most metal-poor lithium-rich giants known.

79 ASTRONOMY AND ASTROPHYSICS↗

Birefringence-balanced polarimetric optical fiber sensor for high-temperature measurements

A birefringence-balanced polarimetric multimode fiber temperature sensor is proposed and demonstrated. Two single-crystal sapphire rods are incorporated into the sensor head. They are connected end to end in such a way that the slow axis of the first rod is aligned with the fast axis of the second rod, referred to as the referencing rod. Since the lengths of the two rods are chosen to be almost the same, the original birefringence of the first rod is balanced by that of the second rod. A light-emitting diode serves as the light source. This sensor has been experimentally demonstrated for high-temperature measurements as high as 1500 C. A sensitivity of 5 C has been obtained.

Wang, Anbo↗

Mechanistic Insights into Co and Fe Quaterpyridine-Based CO 2 Reduction Catalysts: Metal–Ligand Orbital Interaction as the Key Driving Force for Distinct Pathways

Both [Co II (qpy)(H 2 O) 2 ] 2+ and [Fe II (qpy)(H 2 O) 2 ] 2+ (with qpy = 2,2':6',2'':6'',2'''-quaterpyridine) are efficient homogeneous electrocatalysts and photoelectrocatalysts for the reduction of CO 2 to CO. The Co catalyst is more efficient in the electrochemical reduction, while the Fe catalyst is an excellent photoelectrocatalyst. This work uses density functional theory to shed light on the contrasting catalytic pathways. While both catalysts experience primarily ligand-based reductions, the second reduction in the Co catalyst is delocalized onto the metal via a metal-ligand bonding interaction, causing a spin transition and a distorted ligand framework. This orbital interaction explains the experimentally observed mild reduction potential and slow kinetics of the second reduction. The decreased hardness and doubly occupied d z 2 -orbital facilitate a σ-bond with the CO 2 -π* in an η 1 - κC binding mode. CO 2 binding is only possible after two reductions resulting in an EEC mechanism (E = electron transfer, C = chemical reaction), and the second protonation is rate-limiting. In contrast, the Fe catalyst maintains a Lewis acidic metal center throughout the reduction process because the metal orbitals do not strongly mix with the qpy-π* orbitals. Further, this allows binding of the activated CO 2 in an η 2 -binding mode. This interaction stabilizes the activated CO 2 via a π-type interaction of a Fe-t 2g orbital and the CO 2 -π* and a dative bond of the oxygen lone pair. This facilitates CO 2 binding to a singly reduced catalyst resulting in an ECE mechanism. The barrier for CO 2 addition and the second protonation are higher than those for the Co catalyst and rate-limiting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chain Dynamics in Magnetorheological Suspensions

Magnetorheological (MR) suspensions are composed of colloidal particles which acquire dipole moments when subjected to an external magnetic field. At sufficient field strengths and concentrations, the dipolar particles rapidly aggregate to form long chains. Subsequent lateral cross-linking of the dipolar chains is responsible for a rapid liquid-to-solid-like rheological transition. The unique, magnetically-activated rheological properties of MR suspensions make them ideal for interfacing mechanical systems to electronic controls. Additionally, the ability to experimentally probe colloidal suspensions interacting through tunable anisotropic potentials is of fundamental interest. Our current experimental work has focused on understanding the fluctuations of dipolar chains. It has been proposed by Halsey and Toor (HT) that the strong Landau-Peierls thermal fluctuations of dipolar chains could be responsible for long-range attractions between chains. Such interactions will govern the long-time relaxation of MR suspensions. We have synthesized monodisperse neutrally buoyant MR suspensions by density matching stabilized ferrofluid emulsion droplets with D2O. This allows us to probe the dynamics of the dipolar chains using light scattering without gravitational, interfacial, and polydispersity effects to resolve the short-wavelength dynamics of the dipolar chains. We used diffusing wave spectroscopy to measure these dynamics. The particle displacements at short times that show an independence to the field strength, but at long times exhibit a constrained, sub-diffusive motion that slows as the dipole strength is increased. The experiments are in good qualitative agreement with Brownian dynamics simulations of dipolar chains. Although there have been several important and detailed studies of the structure and interactions in MR suspensions, there has not been conclusive evidence that supports or contradicts the HT model prediction that long-range interactions exist between fluctuating chains of dipolar particles. Resolving this issue would contribute greatly to the understanding of these interesting and important materials. We have begun to test the predictions of the HT model by both examining the dynamics of individual chains and by measuring the forces between dipolar chains directly to accurately and quantitatively assess the interactions that they experience. To do so, we employ optical trapping techniques and video-microscopy to manipulate and observe our samples on the microscopic level. With these techniques, it is possible to observe chains that are fluctuating freely in three-dimensions, independent of interfacial effects. More importantly, we are able to controllably observe the interactions of two chains at various separations to measure the force-distance profile. The techniques also allow us to study the mechanical properties of individual chains and chain clusters. Our work to this point has focused on reversibly-formed dipolar chains due to field induced dipoles where the combination of this chaining, the dipolar forces, and the hydrodynamic interactions that dictate the rheology of the suspensions. One can envision, however, many situations where optical, electronic, or rheological behavior may be optimized with magneto-responsive anisotropic particles. Chains of polarizable particles may have the best properties as they can coil and flex in the absence of a field and stiffen and orient when a field is applied. We have recently demonstrated a synthesis of stable, permanent paramagnetic chains by both covalently and physically linking paramagnetic colloidal particles. The method employed allows us to create monodisperse chains of controlled length. We observed the stability, field-alignment, and rigidity of this new class of materials. The chains may exhibit unique rheological properties in an applied magnetic field over isotropic suspensions of paramagnetic particles. They are also useful rheological models as bead-spring systems. These chains form the basis for our current experiments with optical traps.

Gast, A. P.↗

Sub-micrometer random-pyramid texturing of silicon solar wafers with excellent surface passivation and low reflectance

Select emerging solar cell technologies, ranging from very narrow screen-printed fingers to perovskite/silicon tandems, would benefit from a reduction of the height of the standard pyramidal texture of monocrystalline silicon wafers to below 1 μm. However, fabricating such small surface features usually compromises the requisite low reflectance and high passivation quality. Through systematic design of experiments, we demonstrate that conventional alkaline-based wet-chemical etching processes can be tuned to produce dense, spatially homogeneous, and uniformly sized sub-micrometer pyramids. Precise texture size can be further controlled by adding potassium silicate to the texturing solution to effectively slow the pyramid growth rate and promote nucleation. With pyramid size distribution data—extracted from multiple atomic force microscopy images across each wafer—we demonstrate 16 nanotextures with average pyramid sizes ranging from 62 to 512 nm, with the largest having only 0.3% of its pyramids taller than 1 μm. Six of the nanotextures exhibit light trapping and surface defect densities comparable to state-of-the-art microtextured wafers. In conclusion, the best nanotexture achieved an AM1.5G-weighted reflectance of 11.8% and a minority-carrier lifetime of 3.4 ms after passivation with amorphous silicon, demonstrating that smaller textures need not deteriorate solar cell performance.

14 SOLAR ENERGY↗

Asymmetric Reaction Pathways of Conversion-Type Electrodes for Lithium-Ion Batteries

Metal oxides have been actively explored as promising conversion-type electrode materials for lithium ion batteries due to high deliverable capacity but still notorious for poor cyclability, capacity fading, voltage hysteresis, etc. Yet, the fundamental reason for the undesirable properties of metal oxides behind the repetitive conversion process is still obscure. In this work, we take advantage of synchrotron X-ray techniques as well as transmission electron microscopy to monitor the structural changes during both conversion (lithiation) and reconversion (delithiation) reactions. Difference in diffusion rates of lithium and metal plays a decisive role in determining the reaction pathway. We find lithium accommodation and extraction occur via different reaction routes: lithiation follows a kinetically driven way while delithiation adopts a route close to the thermodynamic ground state path. Thermodynamic structural evolution features the formation of an intermediate phase of Li-Metal (M)-O, suggesting lithium removal accompanies with the Li/M ionic exchange and rearrangement of oxygen framework. The slow diffusion of metal ions and the high kinetic and energy barrier for dissociating the intermediate phase are mainly responsible for uncompleted reconversion reaction, evidenced by remaining Li-M-O phase at the end of charge. Imperfect reconversion reaction eventually limits the utilization of lithium ions over the repeated cycling. Furthermore, this work sheds light on structural changes occurring at metal oxides during both conversion and reconversion processes, which is strongly linked with the performances of conversion-type materials in applications.

25 ENERGY STORAGE↗

Photodissociation Dynamics of the Cyclohexyl Radical from the 3p Rydberg State at 248 nm

The photodissociation of jet-cooled cyclohexyl was studied by exciting the radicals to their 3p Rydberg state by using 248 nm laser light and detecting photoproducts by photofragment translational spectroscopy. Both H atom loss and dissociation to heavy fragment pairs are observed. The H atom loss channel exhibits a two-component translational energy distribution. The fast photoproduct component is attributed to impulsive cleavage directly from an excited state, likely the Rydberg 3s state, forming cyclohexene. The slow component is due to statistical decomposition of hot cyclohexyl radicals that internally convert to the ground electronic state prior to H atom loss. The fast and slow components are present in an ~0.7:1 ratio, similar to findings in other alkyl radicals. Internal conversion to the ground state also leads to ring-opening followed by dissociation to 1-buten-4-yl + ethene in comparable yield to H-loss, with the C 4 H 7 fragment containing enough internal energy to dissociate further to butadiene via H atom loss. A very minor ground-state C 5 H 8 + CH 3 channel is observed, attributed predominantly to 1,3-pentadiene formation. Lastly, the ground-state branching ratios agree well with RRKM calculations, which also predict C 4 H 6 + C 2 H 5 and C 3 H 6 + C 3 H 5 channels with similar yield to C 5 H 8 + CH 3 . If these channels were active, it was at levels too low to be observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical formulation of phase space microbunching instability in the presence of intrabeam scattering for single-pass or recirculation accelerators

Microbunching instability (MBI) has been one of the most challenging issues in designs of high-brightness beam transport lines for single-pass or recirculating accelerators. Although the intrabeam scattering (IBS) has long been studied in lepton or hadron storage rings as a slow diffusion process or in high-intensity proton linear accelerators as one mechanism for the beam halo, the effects of IBS on single-pass or recirculating electron accelerators have drawn attention only in the recent two decades due to emergence of linac-based or energy-recovery-linac-based fourth-generation light sources, which require high-quality electron beams during the beam transport. In this paper we develop a theoretical formulation of microbunching instability in the presence of IBS for single-pass or recirculation accelerators. To quantify MBI with inclusion of IBS, we start from the Vlasov-Fokker-Planck (VFP) equation, combining both collective interactions and incoherent IBS effects. The linearized VFP equation and the corresponding friction and diffusion coefficients are derived. The evolutions of the resultant density and energy modulations are formulated as a set of coupled integral equations. The theoretical formulation is then applied to a recirculating beamline design. The results from the semianalytical calculation are compared and show good agreement with massive particle tracking simulations.

43 PARTICLE ACCELERATORS↗

Rotational Periods and Starspot Activity of Young Solar-Type Dwarfs in the Open Cluster IC 4665

We present the results of a V-band photometric monitoring survey of 15 late-type dwarfs in the young open cluster IC 4665. Low-amplitude periodic light variations are found for 8 stars and ascribed to the modulation by starspots that cover typically a few percent of the stellar disk. Periods range from 0.6 to 3.7 d, translating to equatorial velocities between 13 and 93 km/s. That no period longer than 4 d was detected suggests a relative paucity of extremely slow rotators (V(sub eq) much less than 10 km/s) among late-type dwarfs in IC 4665. The fractional number of slow rotators in IC 4665 is similar to that of Alpha Per cluster, suggesting that IC 4665 is close in age to Alpha Per (approx. 50 Myr).

Allain, S.↗

Starspots found on the ellipsoidal variable V350 lacertae = HR 8575

It has been a puzzle why this chromospherically active, strong-dynamo K2 IV-III star is not known to have the large starspots characteristic of other such stars. Published individual radial velocities, which had never been analyzed, are used to derive an orbital solution. Combined with the one older existing orbital solution, this yields an improved orbital ephemeris: time of conjunction (K star behind) = JD 2445255.47 +/- 0.11 days and period = 17.75346 +/- 0.00016 days. All available photoelectric photometry, from 1970.9 to 1992.5, is collected A cos 2 theta fit of the ellipticity effect yields JD 2445255.60 +/- 0.06 days for a time of conjunction, 17.7523 +/- 0.0005 days for the period, and 0.084 mins for the peak-to-peak amplitude in V. With the ellipticity effect removed, the light curve does show measurable starspot variability in 15 of 16 data groups, the starspot wave amplitudes ranging between 0.03 mins and 0.08 mins. Ten starspots are identified and their rotation periods determined, the mean being 17.70 +/- 0.03 days (confirming synchronous rotation) and the range being Delta P/P = 0.017 +/- 0.006 (indicating differential rotation). There is a slow variation in mean brightness, almost 0.1 min in range and at least 2 decades in length.

Crews, Lionel J.↗

Review of Human Cognitive Performance in Spaceflight

Human space exploration is inherently hazardous, particularly for lon g duration (LD) missions (22 days or longer). Maintenance of cognitive functioning is essential, but flight environments pose numerous pote ntial risks to the brain and cognitive performance (eg, radiation, to xins, chronic stress, sleep deprivation, hypercarbia, fluid shifts, h ormone imbalances, and injury). There have been persistent anecdotal reports of cognitive deficits during missions, but an up?-to-date rev iew of the evidence for such changes has remained unavailable. Method s: We identified and reviewed English language publications found via electronic searches in PubMed, PsycInfo, Inspec, the NASA Technical Report Server, and the Defense Technical Information Center, plus rec ursive searches of publication bibliographies. Search terms included the word cognition, cognitive, or performance along with spaceflight, flight, mission, or closely related terms. Results: Inter?-study variability precluded meta?-analysis. Some 32 published studies involving cognitive assessment during spaceflight were identified, involving a total of 110 participants (mean: 3.4 participants per study). The lo ngest?-duration study spanned 438 days, with six additional studies i nvolving flight durations of 90 days, and 11 more studies involved fl ight durations exceeding 21 days. The available evidence failed to st rongly support or refute the existence of cognitive deficits in LD sp aceflight, in part due to inadequate power or control conditions. Evi dence of increased variability in cognitive performance during spacef light, both within and between individuals, was common. Discussion: T hese results represent a negative finding based on small numbers of s ubjects for any given cognitive function. The increased variability within and (particularly) between individuals highlights the potential danger of generalizing from case studies. A mismatch therefore remain s between anecdotal reports describing generalized cognitive slowing, attention and memory problems during missions and the experimental e vidence supporting such deficits. Since a major justification for man ned spaceflight rests with the cognitive flexibility of humans, addit ional studies and further analysis of existing operational data appea rs warranted.

Strangman, Gary↗

Evidence for the siderophilic behavior of meteoritic bismuth

The microdistributions of Bi and Pb-208 in the Khohar L3 chondrite were determined in situ using radiography techniques based on particle track detectors. Strong (enrichment factors 10 to 100) localizations of Bi were found in association with kamacite; no enhancement of Bi or Pb was found in sulfides. High-magnification microprobe and reflected light observations strongly indicate that Bi actually resides in the kamacite, providing evidence for the siderophilic nature. The minor and major element chemistry of the metals in the sample was typical of chondrites of its type. The unusual Bi distribution in the Khohar chondrite suggests that it may have been exposed to high Bi partial pressures during slow cooling at kamacite-taenite phase separation in a volatile-rich region of a parent body, or that Bi may have been incorporated into previously cooled grains by mild reheating.

Woolum, D. S.↗

Algorithms for High-Speed Noninvasive Eye-Tracking System

Two image-data-processing algorithms are essential to the successful operation of a system of electronic hardware and software that noninvasively tracks the direction of a person s gaze in real time. The system was described in High-Speed Noninvasive Eye-Tracking System (NPO-30700) NASA Tech Briefs, Vol. 31, No. 8 (August 2007), page 51. To recapitulate from the cited article: Like prior commercial noninvasive eyetracking systems, this system is based on (1) illumination of an eye by a low-power infrared light-emitting diode (LED); (2) acquisition of video images of the pupil, iris, and cornea in the reflected infrared light; (3) digitization of the images; and (4) processing the digital image data to determine the direction of gaze from the centroids of the pupil and cornea in the images. Most of the prior commercial noninvasive eyetracking systems rely on standard video cameras, which operate at frame rates of about 30 Hz. Such systems are limited to slow, full-frame operation. The video camera in the present system includes a charge-coupled-device (CCD) image detector plus electronic circuitry capable of implementing an advanced control scheme that effects readout from a small region of interest (ROI), or subwindow, of the full image. Inasmuch as the image features of interest (the cornea and pupil) typically occupy a small part of the camera frame, this ROI capability can be exploited to determine the direction of gaze at a high frame rate by reading out from the ROI that contains the cornea and pupil (but not from the rest of the image) repeatedly. One of the present algorithms exploits the ROI capability. The algorithm takes horizontal row slices and takes advantage of the symmetry of the pupil and cornea circles and of the gray-scale contrasts of the pupil and cornea with respect to other parts of the eye. The algorithm determines which horizontal image slices contain the pupil and cornea, and, on each valid slice, the end coordinates of the pupil and cornea. Information from multiple slices is then combined to robustly locate the centroids of the pupil and cornea images. The other of the two present algorithms is a modified version of an older algorithm for estimating the direction of gaze from the centroids of the pupil and cornea. The modification lies in the use of the coordinates of the centroids, rather than differences between the coordinates of the centroids, in a gaze-mapping equation. The equation locates a gaze point, defined as the intersection of the gaze axis with a surface of interest, which is typically a computer display screen (see figure). The expected advantage of the modification is to make the gaze computation less dependent on some simplifying assumptions that are sometimes not accurate

Talukder, Ashit↗

Sleep, performance, circadian rhythms, and light-dark cycles during two space shuttle flights

Sleep, circadian rhythm, and neurobehavioral performance measures were obtained in five astronauts before, during, and after 16-day or 10-day space missions. In space, scheduled rest-activity cycles were 20-35 min shorter than 24 h. Light-dark cycles were highly variable on the flight deck, and daytime illuminances in other compartments of the spacecraft were very low (5.0-79.4 lx). In space, the amplitude of the body temperature rhythm was reduced and the circadian rhythm of urinary cortisol appeared misaligned relative to the imposed non-24-h sleep-wake schedule. Neurobehavioral performance decrements were observed. Sleep duration, assessed by questionnaires and actigraphy, was only approximately 6.5 h/day. Subjective sleep quality diminished. Polysomnography revealed more wakefulness and less slow-wave sleep during the final third of sleep episodes. Administration of melatonin (0.3 mg) on alternate nights did not improve sleep. After return to earth, rapid eye movement (REM) sleep was markedly increased. Crewmembers on these flights experienced circadian rhythm disturbances, sleep loss, decrements in neurobehavioral performance, and postflight changes in REM sleep.

Non-NASA Center↗

Towards Long‐Term Stable Perovskite Solar Cells: Degradation Mechanisms and Stabilization Techniques

It is certain that perovskite materials must be a game‐changer in the solar industry as long as their stability reaches a level comparable with the lifetime of a commercialized Si photovoltaic. However, the operational stability of perovskite solar cells and modules still remains unresolved, especially when devices operate in practical energy‐harvesting modes represented by maximum power point tracking under 1 sun illumination at ambient conditions. This review article covers from fundamental aspects of perovskite instability including chemical decomposition pathways under light soaking and electrical bias, to recent advances and techniques that effectively prevent such degradation of perovskite solar cells and modules. In particular, fundamental causes for permanent degradation due to ion migration and trapped charges are overviewed and explain their interplay between ions and charges. Based on the degradation mechanism, recent advances on the strategies are discussed to slow down the degradation during operation for a practical use of perovskite‐based solar devices.

14 SOLAR ENERGY↗

A comparative study of the fatty acid composition of prochloron lipids

The chemical analysis of lipids of Prochloron isolated from several hosts is discussed. The object was to determine whether differences in lipid composition could be used to characterize organisms from different sources. Major lipid components are given. An analysis of fatty acid composition of individual lipids slowed a distinctive disstribution of fatty acids. While present results do not justify the use of fatty acid content in the taxonomy of Prochlon, the variations found in the lipids of cells from the same host harvested from different areas, or at different times in the same area, suggest that a study of the effects of temperature and light intensity on lipid composition would be rewarding.

Kenrick, J. R.↗

Size and metabolic properties of single muscle fibers in rat soleus after hindlimb suspension

The effect of 28-day-long hind-limb suspension (HS) combined with 10 daily forceful lengthening contractions of the limb on the morphological and metabolic properties of individual fibers of the soleus was studied in rats, using quantitative histochemical techniques. Compared with nonsuspended controls (CON), soleus wet weights of HS rats were decreased by 49 percent; the fibers staining lightly for myosin ATPase ('light-ATPase' fibers) atrophied more than the 'dark-ATPase' fibers. Single-fiber alpha-glycerophosphate dehydrogenase (GPD) and succinate dehydrogenase (SDH) activities were higher in HS than in CON rats. Daily forceful lengthening contractions did not prevent the HS-induced changes. The results support the view that the soleus fibers can change from a slow-twitch oxidative to a fast-twitch oxidative-glycolytic profile, but rarely to a fast-twitch glycolytic one, and that the SDH and GPD activities per volume of tissue can be increased even when there are severe losses of contractile proteins.

Hauschka, Edward O.↗