SEARCH · Engineering Papers

Results for “Sensitivity formulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Sensitivity Analysis of Flutter Response of a Wing Incorporating Finite-Span Corrections

Flutter analysis of a wing is performed in compressible flow using state-space representation of the unsteady aerodynamic behavior. Three different expressions are used to incorporate corrections due to the finite-span effects of the wing in estimating the lift-curve slope. The structural formulation is based on a Rayleigh-Pitz technique with Chebyshev polynomials used for the wing deflections. The aeroelastic equations are solved as an eigen-value problem to determine the flutter speed of the wing. The flutter speeds are found to be higher in these cases, when compared to that obtained without accounting for the finite-span effects. The derivatives of the flutter speed with respect to the shape parameters, namely: aspect ratio, area, taper ratio and sweep angle, are calculated analytically. The shape sensitivity derivatives give a linear approximation to the flutter speed curves over a range of values of the shape parameter which is perturbed. Flutter and sensitivity calculations are performed on a wing using a lifting-surface unsteady aerodynamic theory using modules from a system of programs called FAST.

Issac, Jason Cherian↗

NASA NTRS2004

Investigation of Navier-Stokes Code Verification and Design Optimization

With rapid progress made in employing computational techniques for various complex Navier-Stokes fluid flow problems, design optimization problems traditionally based on empirical formulations and experiments are now being addressed with the aid of computational fluid dynamics (CFD). To be able to carry out an effective CFD-based optimization study, it is essential that the uncertainty and appropriate confidence limits of the CFD solutions be quantified over the chosen design space. The present dissertation investigates the issues related to code verification, surrogate model-based optimization and sensitivity evaluation. For Navier-Stokes (NS) CFD code verification a least square extrapolation (LSE) method is assessed. This method projects numerically computed NS solutions from multiple, coarser base grids onto a freer grid and improves solution accuracy by minimizing the residual of the discretized NS equations over the projected grid. In this dissertation, the finite volume (FV) formulation is focused on. The interplay between the xi concepts and the outcome of LSE, and the effects of solution gradients and singularities, nonlinear physics, and coupling of flow variables on the effectiveness of LSE are investigated. A CFD-based design optimization of a single element liquid rocket injector is conducted with surrogate models developed using response surface methodology (RSM) based on CFD solutions. The computational model consists of the NS equations, finite rate chemistry, and the k-6 turbulence closure. With the aid of these surrogate models, sensitivity and trade-off analyses are carried out for the injector design whose geometry (hydrogen flow angle, hydrogen and oxygen flow areas and oxygen post tip thickness) is optimized to attain desirable goals in performance (combustion length) and life/survivability (the maximum temperatures on the oxidizer post tip and injector face and a combustion chamber wall temperature). A preliminary multi-objective optimization study is carried out using a geometric mean approach. Following this, sensitivity analyses with the aid of variance-based non-parametric approach and partial correlation coefficients are conducted using data available from surrogate models of the objectives and the multi-objective optima to identify the contribution of the design variables to the objective variability and to analyze the variability of the design variables and the objectives. In summary the present dissertation offers insight into an improved coarse to fine grid extrapolation technique for Navier-Stokes computations and also suggests tools for a designer to conduct design optimization study and related sensitivity analyses for a given design problem.

Vaidyanathan, Rajkumar↗

NASA NTRS1995

Sensitivity Analysis of Wing Aeroelastic Responses

Design for prevention of aeroelastic instability (that is, the critical speeds leading to aeroelastic instability lie outside the operating range) is an integral part of the wing design process. Availability of the sensitivity derivatives of the various critical speeds with respect to shape parameters of the wing could be very useful to a designer in the initial design phase, when several design changes are made and the shape of the final configuration is not yet frozen. These derivatives are also indispensable for a gradient-based optimization with aeroelastic constraints. In this study, flutter characteristic of a typical section in subsonic compressible flow is examined using a state-space unsteady aerodynamic representation. The sensitivity of the flutter speed of the typical section with respect to its mass and stiffness parameters, namely, mass ratio, static unbalance, radius of gyration, bending frequency, and torsional frequency is calculated analytically. A strip theory formulation is newly developed to represent the unsteady aerodynamic forces on a wing. This is coupled with an equivalent plate structural model and solved as an eigenvalue problem to determine the critical speed of the wing. Flutter analysis of the wing is also carried out using a lifting-surface subsonic kernel function aerodynamic theory (FAST) and an equivalent plate structural model. Finite element modeling of the wing is done using NASTRAN so that wing structures made of spars and ribs and top and bottom wing skins could be analyzed. The free vibration modes of the wing obtained from NASTRAN are input into FAST to compute the flutter speed. An equivalent plate model which incorporates first-order shear deformation theory is then examined so it can be used to model thick wings, where shear deformations are important. The sensitivity of natural frequencies to changes in shape parameters is obtained using ADIFOR. A simple optimization effort is made towards obtaining a minimum weight design of the wing, subject to flutter constraints, lift requirement constraints for level flight and side constraints on the planform parameters of the wing using the IMSL subroutine NCONG, which uses successive quadratic programming.

Issac, Jason Cherian↗

NASA NTRS1981

Application of information theory to the design of line-scan imaging systems

Information theory is used to formulate a single figure of merit for assessing the performance of line scan imaging systems as a function of their spatial response (point spread function or modulation transfer function), sensitivity, sampling and quantization intervals, and the statistical properties of a random radiance field. Computational results for the information density and efficiency (i.e., the ratio of information density to data density) are intuitively satisfying and compare well with experimental and theoretical results obtained by earlier investigators concerned with the performance of TV systems.

Huck, F. O.↗

NASA NTRS1982

Gain selection method and model for coupled propulsion and airframe systems

A longitudinal model is formulated for an advanced fighter from three subsystem models: the inlet, the engine, and the airframe. Notable interaction is found in the coupled system. A procedure, based on eigenvalue sensitivities, is presented which indicates the importance of the feedback gains to the optimal solution. This allows ineffectual gains to be eliminated; thus, hardware and expense may be saved in the realization of the physical controller.

Murphy, P. C.↗

NASA NTRS1988

Angular momentum loss in low-mass stars

The wind models discussed by Mestel (1984) are used here to formulate a general expression for the rate of angular momentum loss by magnetic stellar winds as a function of magnetic field configuration, rotation rate, and stellar model properties. The sensitivity of the rotation velocity to the various wind model parameters, the initial angular momenta, and the time dependence of the angular velocity for each mass is shown. The theoretical results are compared with observational ones, and it is found that the existence of very rapidly rotating stars in young clusters implies that low-mass stars are formed with a large spread of angular momentum. The high efficiency of angular momentum loss through magnetic stellar winds causes the rotation velocity to become less dependent on initial angular momentum J0 with time; by 300 million yur, the rotation velocity becomes independent of J0. This results in a decrease with time in the spread of rotation velocities as a function of stellar mass in young clusters.

Kawaler, Steven D.↗

NASA NTRS1991

Optimization techniques applied to passive measures for in-orbit spacecraft survivability

Spacecraft designers have always been concerned about the effects of meteoroid impacts on mission safety. The engineering solution to this problem has generally been to erect a bumper or shield placed outboard from the spacecraft wall to disrupt/deflect the incoming projectiles. Spacecraft designers have a number of tools at their disposal to aid in the design process. These include hypervelocity impact testing, analytic impact predictors, and hydrodynamic codes. Analytic impact predictors generally provide the best quick-look estimate of design tradeoffs. The most complete way to determine the characteristics of an analytic impact predictor is through optimization of the protective structures design problem formulated with the predictor of interest. Space Station Freedom protective structures design insight is provided through the coupling of design/material requirements, hypervelocity impact phenomenology, meteoroid and space debris environment sensitivities, optimization techniques and operations research strategies, and mission scenarios. Major results are presented.

Mog, Robert A.↗

NASA NTRS2006

Adjoint-Based Algorithms for Adaptation and Design Optimizations on Unstructured Grids

Schemes based on discrete adjoint algorithms present several exciting opportunities for significantly advancing the current state of the art in computational fluid dynamics. Such methods provide an extremely efficient means for obtaining discretely consistent sensitivity information for hundreds of design variables, opening the door to rigorous, automated design optimization of complex aerospace configuration using the Navier-Stokes equation. Moreover, the discrete adjoint formulation provides a mathematically rigorous foundation for mesh adaptation and systematic reduction of spatial discretization error. Error estimates are also an inherent by-product of an adjoint-based approach, valuable information that is virtually non-existent in today's large-scale CFD simulations. An overview of the adjoint-based algorithm work at NASA Langley Research Center is presented, with examples demonstrating the potential impact on complex computational problems related to design optimization as well as mesh adaptation.

Nielsen, Eric J.↗

NASA NTRS2014

Conceptual Design of Low-Boom Aircraft with Flight Trim Requirement

A new low-boom target generation approach is presented which allows the introduction of a trim requirement during the early conceptual design of supersonic aircraft. The formulation provides an approximation of the center of pressure for a presumed aircraft configuration with a reversed equivalent area matching a low-boom equivalent area target. The center of pressure is approximated from a surrogate lift distribution that is based on the lift component of the classical equivalent area. The assumptions of the formulation are verified to be sufficiently accurate for a supersonic aircraft of high fineness ratio through three case studies. The first two quantify and verify the accuracy and the sensitivity of the surrogate center of pressure corresponding to shape deformation of lifting components. The third verification case shows the capability of the approach to achieve a trim state while maintaining the low-boom characteristics of a previously untrimmed configuration. Finally, the new low-boom target generation approach is demonstrated through the early conceptual design of a demonstrator concept that is low-boom feasible, trimmed, and stable in cruise.

Ordaz, Irian↗

NASA NTRS1995

Three-dimensional solutions for coupled thermoelectroelastic response of multilayered plates

Analytic three-dimensional solutions are presented for the coupled thermoelectroelastic response of multilayered hybrid composite plates. The plates consist of a combination of fiber-reinforced cross-ply and piezothermoelastic layers. Both the thermoelectroelastic static response and its sensitivity coefficients are computed. The sensitivity coefficients measure the sensitivity of the response to variations in different mechanical, thermal and piezoelectric material properties of the plate. A linear constitutive model is used, and the material properties are assumed to be independent of the temperature and the electric field. The plates are assumed to have rectangular geometry and special material symmetries. A mixed formulation is used with the fundamental unknowns consisting of the three transverse stress components; three displacement components; transverse component of the electric displacement field; electric potential; transverse heat flux component, and temperature change. Each of the fundamental unknowns is expressed in terms of a double Fourier series in the Cartesian surface coordinates. A state space approach is used to generate the static response and to evaluate the sensitivity coefficients. Extensive numerical results are presented showing the effects of variation in the geometric parameters of the plate on the different response quantities and their sensitivity coefficients.

Xu, Kangming↗

NASA NTRS1988

Investigation of the influence of wind shear on the aerodynamic characteristics of aircraft using a vortex-lattice method

The objective was to investigate and characterize the aerodynamic effect of shear flow through a series of sensitivity studies of the wind velocity gradients and wing planform geometry parameters. The wind shear effect was computed using a modified vortex-lattice computer program and characterized through the formulation of wind shear aerodynamic coefficients. The magnitude of the aerodynamic effect was demonstrated by computing the resultant change in the aerodynamics of a conventional wing and tail combination on a fixed flight path through a simulated microburst. The results of the study indicate that a significant amount of the control authority of an airplane may be required to counteract the wind shear induced forces and moments in the microburst environment.

Vicroy, Dan D.↗

NASA NTRS1995

An assessment of viscous effects in computational simulation of benign and burst vortex flows on generic fighter wind-tunnel models using TEAM code

Vortex flows on a twin-tail and a single-tail modular transonic vortex interaction (MTVI) model, representative of a generic fighter configuration, are computationally simulated in this study using the Three-dimensional Euler/Navier-Stokes Aerodynamic Method (TEAM). The primary objective is to provide an assessment of viscous effects on benign (10 deg angle of attack) and burst (35 deg angle of attack) vortex flow solutions. This study was conducted in support of a NASA project aimed at assessing the viability of using Euler technology to predict aerodynamic characteristics of aircraft configurations at moderate-to-high angles of attack in a preliminary design environment. The TEAM code solves the Euler and Reynolds-average Navier-Stokes equations on patched multiblock structured grids. Its algorithm is based on a cell-centered finite-volume formulation with multistage time-stepping scheme. Viscous effects are assessed by comparing the computed inviscid and viscous solutions with each other and experimental data. Also, results of Euler solution sensitivity to grid density and numerical dissipation are presented for the twin-tail model. The results show that proper accounting of viscous effects is necessary for detailed design and optimization but Euler solutions can provide meaningful guidelines for preliminary design of flight vehicles which exhibit vortex flows in parts of their flight envelope.

Kinard, Tim A.↗

NASA NTRS1996

Attitude Estimation Using Modified Rodrigues Parameters

In this paper, a Kalman filter formulation for attitude estimation is derived using the Modified Rodrigues Parameters. The extended Kalman filter uses a gyro-based model for attitude propagation. Two solutions are developed for the sensitivity matrix in the Kalman filter. One is based upon an additive error approach, and the other is based upon a multiplicative error approach. It is shown that the two solutions are in fact equivalent. The Kalman filter is then used to estimate the attitude of a simulated spacecraft. Results indicate that then new algorithm produces accurate attitude estimates by determining actual gyro biases.

Crassidis, John L.↗

NASA NTRS2000

Determining the Ocean's Role on the Variable Gravity Field and Earth Rotation

Our three year investigation, carried out over the period 18-19 Nov 2000, focused on the study of the variability in ocean angular momentum and mass signals and their relation to the Earth's variable rotation and gravity field. This final report includes a summary description of our work and a list of related publications and presentations. One thrust of the investigation was to determine and interpret the changes in the ocean mass field, as they impact on the variable gravity field and Earth rotation. In this regard, the seasonal cycle in local vertically-integrated ocean mass was analyzed using two ocean models of different complexity: (1) the simple constant-density, coarse resolution model of Ponte; and (2) the fully stratified, eddy-resolving model of Semtner and Chervin. The dynamics and thermodynamics of the seasonal variability in ocean mass were examined in detail, as well as the methodologies to calculate those changes under different model formulations. Another thrust of the investigation was to examine signals in ocean angular momentum (OAM) in relation to Earth rotation changes. A number of efforts were undertaken in this regard. Sensitivity of the oceanic excitation to different assumptions about how the ocean is forced and how it dissipates its energy was explored.

Ponte, Rui M.↗

NASA NTRS2011

Development of the Molecular Adsorber Coating for Spacecraft and Instrument Interiors

On-orbit Molecular Contamination occurs when materials outgas and deposit onto very sensitive interior surfaces of the spacecraft and instruments. The current solution, Molecular Adsorber Pucks, has disadvantages, which are reviewed. A new innovative solution, Molecular Adsorber Coating (MAC), is currently being formulated, optimized, and tested. It is a sprayable alternative composed of Zeolite-based coating with adsorbing properties.

Abraham, Nithin↗

NASA NTRSDate not supplied

Sensitivity of the ACCP Value Framework Science Benefit Score

NASA’s priorities for Earth Science are informed by the 2017-2027 Decadal Survey for Earth Science and Applications from Space of the National Academies of Sciences, Engineering and Medicine. In that document, five Designated Observables are identified as priorities for implementation: Aerosols, Cloud-Convection-Precipitation, Surface Biology, Mass Change, and Surface Deformation Change. In 2019, NASA initiated four multi-year studies to formulate, assess, and recommend potential Observing System concepts that are responsive to the recommendations of the Earth Science Decadal Survey. The Aerosols, Clouds, Convection, and Precipitation (ACCP) study investigates opportunities for synergistic science resulting from implementations that combine both Aerosols science objectives and Clouds, Convection, and Precipitation science objectives. For the ACCP study, a Value Framework was designed to introduce structure, transparency, and traceability in the mission down-select decision process. This paper presents a sensitivity analysis that was conducted to characterize the behavior of the science benefit score of the ACCP Value Framework. it includes derivations of the sensitivity analysis equations, numerical analyses of the behavior of the combined benefit score, and the conclusions drawn from the results of the work that was conducted. The results of this analysis were key to ensuring that the aggregated science benefit scores would enable the team to differentiate and contrast across concepts.

John McLaughlan↗

NASA NTRS1977

Application of the endochronic theory of viscoplasticity to solid propellants and sandasphalt concrete

Solid propellants, sand-asphalt concrete and hard plastics showed rate sensitive mechanical behavior which, in addition, indicated that these materials have a permanent memory of the strain (or loading) path by which their present state was attained. A constitutive equation was formulated in general three dimensional tensorial form by means of irreversible thermodynamics. By using a very simple analytical form, it was shown that the mechanical behavior of solid propellants and sand-asphalt concrete can be readily described.

Peng, S. T. J.↗

NASA NTRS1979

Recent progress in finite-volume calculations for wing-fuselage combinations

Progress in the application of finite-volume methods to the calculation of transonic potential flows past general wing-body combinations is reviewed. Two different methods of generating boundary-conforming grids are investigated, and the results compared to provide an estimate of solution sensitivity to grid geometry. Both conservative and quasi-conservative difference schemes are used in one of the coordinate systems. Results show that the error introduced by the quasi-conservative formulation seems to be small, although a one-dimensional analysis suggests that schemes of this type do not necessarily produce mass-conserving shocks. Comparison of calculated results with experimental data for realistic fuselage geometries clearly shows the importance of modelling the effect of fuselage geometry upon the wing pressure distribution.

Caughey, D. A.↗