Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Photochemical preparation of CdS hollow microspheres at room temperature and their use in visible-light photocatalysis

CdS hollow microspheres have been successfully prepared by a photochemical preparation technology at room temperature, using polystyrene latex particles as templates, CdSO{sub 4} as cadmium source and Na{sub 2}S{sub 2}O{sub 3} as both sulphur source and photo-initiator. The process involved the deposition of CdS nanoparticles on the surface of polystyrene latex particles under the irradiation of an 8 W UV lamp and the subsequent removal of the latex particles by dispersing in dichloromethane. Photochemical reactions at the sphere/solution interface should be responsible for the formation of hollow spheres. The as-prepared products were characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. Such hollow spheres could be used in photocatalysis and showed high photocatalytic activities in photodegradation of methyl blue (MB) in the presence of H{sub 2}O{sub 2}. The method is green, simple, universal and can be extended to prepare other sulphide and oxide hollow spheres. -- Graphical abstract: Taking polystyrene spheres dispersed in a precursor solution as templates, CdS hollow microspheres composed of nanoparticles were successfully prepared via a new photochemical route at room temperature. Display Omitted Research highlights: {yields} Photochemical method was first employed to prepare hollow microspheres. {yields} CdS hollow spheres were first prepared at room temperature using latex spheres. {yields} The polystyrene spheres used as templates were not modified with special groups. {yields}The CdS hollow microspheres showed high visible-light photocatalytic activities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and Mechanical Properties of Zr-Si-N Coatings Deposited by Arc Evaporation at Different Substrate Bias Voltages

ZrN and Zr-Si-N coatings were formed using vacuum-arc plasma fluxes deposition system at the substrate bias voltage (U{sub B}) ranged from − 50 to − 220 V on HS6-5-2 steel substrates. The structural, mechanical and tribological properties were characterized using x-ray diffraction, atomic force microscopy, scanning electron microscopy, optical microscopy, nanoindentation and ball-on-disk test. The surface roughness parameter Ra of ZrN coatings is lower than Zr-Si-N coatings. Both roughness Ra of Zr-Si-N coatings and the number of surface defects with mainly small dimensions to 1 µm decrease with increasing negative substrate bias voltage. The addition of silicon to ZrN significantly reduces the crystallite size, from about 18.3 nm for ZrN coating to 6.4 nm for Zr-Si-N coating both deposited at the same U{sub B} = − 100 V and 7.8 nm for U{sub B} = − 150 V. The hardness of Zr-Si-N coatings increases to about 30 GPa with the increase in negative substrate bias voltage (U{sub B} = − 220 V). Adhesion of the coatings tested is high, and critical load is above 80 N and reduces with U{sub B} increase. Coefficient of friction determined using AFM shows similar trend as surface roughness in microscale.

36 MATERIALS SCIENCE↗

Influence of constitutional liquation on corrosion behaviour of aluminium alloy 2017A

The purpose of this work was to investigate microstructural aspects of constitutional liquation in the aluminium alloy 2017A and to determine its effect on corrosion behaviour of this alloy. Non-equilibrium melting of the alloy in the naturally aged condition was provoked by rapid heating above the eutectic temperature and immediate cooling in air. Corrosion testing was performed by exposure to a marine onshore atmosphere. The microstructure examinations were carried out using light microscopy, scanning electron microscopy, X-ray energy dispersion and X-ray diffraction analysis. It was found that, due to rapid heating rate, coarse {theta} (Al{sub 2}Cu) particles were melted by constitutional liquation and this way introduced strong susceptibility of 2017A alloy to intergranular corrosion.

36 MATERIALS SCIENCE↗

Structure and tribological properties of steel after non-vacuum electron beam cladding of Ti, Mo and graphite powders

The non-vacuum electron beam cladding technique was used to fabricate layers alloyed with Ti, Mo and C on the surface of low-alloyed steel. Two types of experiments were carried out. In the first experiment, a mixture of Ti and graphite powders was used for cladding; in the second, a mixture of Ti, Mo and graphite powders was used for cladding. CaF{sub 2} powder or a mixture of CaF{sub 2} and LiF powders was used as flux. The thickness of the cladded layers was in the range of 2–2.2 mm. The structure of the layers was studied using optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The microhardness after cladding of the layers fabricated by cladding of Ti and graphite powders was 8–9 GPa, while the microhardness of layers with Mo additions reached 11–12 GPa. The highest wear resistance at sliding friction and friction in abrasive environment was reached in the samples fabricated using Ti, Mo and graphite mixture due to the higher hardness and the martensite–austenite structure of the matrix. The wear resistance against fixed abrasive particles was 2.4 times higher compared to that of carburized and quenched steel. - Highlights: • Ti, C and Mo mixture of powders was cladded using non-vacuum electron beam treatment. • The depth of the cladded layers was 2.0 … 2.2 mm. • The microhardness of layer with Mo, Ti and C additions reached ~ 11 … 12 GPa. • The hardening of the layers caused by the formation of TiC particles and martensitic matrix • Wear resistance of cladded coatings was 2.4 higher than carburized steel.

36 MATERIALS SCIENCE↗

Structural, magnetic and optical properties of a dilute magnetic semiconductor based on Ce{sub 1−x}Co{sub x}O{sub 2} thin film grown on LaAlO{sub 3}

Highlights: • Co doped CeO{sub 2} was grown on LaAlO{sub 3} (0 0 1) via a modified sol–gel spin-coating technique. • The concentration of the Co ions was varied from 1 to 15 at.%. • The incorporation of 5 at.% of Mn ions was found to provide formation of exceptionally magnetic moment. • This amount demonstrated a giant magnetic moment of 1.09 μ{sub B}/Co. • This amount reduced the optical band gap and enhanced the optical performance. - Abstract: The enhancement of the room temperature ferromagnetism and optical properties of the dilute magnetic metal oxides is a crucial clue to construct spin-based optoelectronic devices. In this work, Ce{sub 1−x}Co{sub x}O{sub 2} (0.01 ≤ x ≤0.15) thin films were prepared via ethylene glycol modified sol–gel spin coating technique on the LaAlO{sub 3} (0 0 1) substrate to enhance their room temperature ferromagnetism and optical properties. The structures, magnetic and optical properties of the prepared films were characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, SQUID magnetometer, X-ray photoelectron spectroscopy and UV–vis spectrophotometer. The results demonstrated that a single phase cubic structure was formed, implying the substitution of Co ions into the Ce ions sites. The prepared films showed room temperature ferromagnetism with saturation magnetic moment of 1.09 μ{sub B}/Co was achieved for 5 at.% Co-doped CeO{sub 2}. This film exhibited high optical transparency of 85% and low optical band energy gap of 3.39 eV. The improved magnetic and optical properties are argued to the increase of the density of the oxygen vacancies into the cerium oxide crystal structure due to the incorporation of Co ions.

36 MATERIALS SCIENCE↗

Nucleation and growth of ZnO on PMMA by low-temperature atomic layer deposition

ZnO films were grown by atomic layer deposition at 35 °C on poly(methyl methacrylate) substrates using diethylzinc and water precursors. The film growth, morphology, and crystallinity were studied using Rutherford backscattering spectrometry, time-of-flight elastic recoil detection analysis, atomic force microscopy, scanning electron microscopy, and x-ray diffraction. The uniform film growth was reached after several hundreds of deposition cycles, preceded by the precursor penetration into the porous bulk and island-type growth. After the full surface coverage, the ZnO films were stoichiometric, and consisted of large grains (diameter 30 nm) with a film surface roughness up to 6 nm (RMS). The introduction of Al{sub 2}O{sub 3} seed layer enhanced the initial ZnO growth substantially and changed the surface morphology as well as the crystallinity of the deposited ZnO films. Furthermore, the water contact angles of the ZnO films were measured, and upon ultraviolet illumination, the ZnO films on all the substrates became hydrophilic, independent of the film crystallinity.

36 MATERIALS SCIENCE↗

Titanium Alloys Thin Sheet Welding with the Use of Concentrated Solar Energy

The present study deals with the welding of titanium alloys thin sheets 1.3 mm thick, with the use of concentrated solar energy. The experimental part of the work took place at a medium size solar furnace at the installation of the Centre National de la Recherche Scientifique, at Odeillo, in Southern France, where similar and dissimilar defect-free welds of titanium Grades 4 and 6 were achieved, in the butt joint configuration. After the determination of the appropriate welding conditions, the optimum welded structures were examined and characterized microstructurally, by means of light optical microscopy, scanning electron microscopy, and microhardness testing. In addition, test pieces extracted from the weldments were tested under uniaxial tensile loading aiming to the estimation of the strength and the ductility of the joint. The analysis of the experimental results and the recorded data led to the basic concluding remarks which demonstrate increased hardness distribution inside the fusion area and severe loss of ductility, but adequate yield and tensile strength of the welds.

36 MATERIALS SCIENCE↗

Microstructure and chemical wet etching characteristics of AlN films deposited by ac reactive magnetron sputtering

The influence of the surface morphology of a molybdenum underlayer on the crystallinity and etchability of reactively sputtered c-axis oriented aluminum nitride thin films was investigated. Atomic force microscopy, scanning electron microscopy, transmission electron microscopy, high resolution x-ray diffraction, and defect selective chemical etching were used to characterize the microstructure of the Mo and AlN films. 1000 nm thick films of AlN with a full width at half maximum (FWHM) of the x-ray rocking curve ranging from 1.1 deg. to 1.9 deg. were deposited on 300 nm thick Mo underlayers with a FWHM of around 1.5 deg. The Ar pressure during the Mo deposition had a critical effect on the Mo film surface morphology, affecting the structure of the subsequently deposited AlN films and, hence, their wet etching characteristics. AlN films deposited on Mo sputtered at a relatively high pressure could not be etched completely, while AlN films deposited on low pressure Mo etched more easily. Postdeposition etching of the Mo surface in Ar rf discharge prior to deposition of the AlN film was found to influence the formation of AlN residuals that were difficult to etch. Optimal rf plasma etching conditions were found, which minimized the formation of these residuals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermal treatment effects on charge storage performance of graphene-based materials for supercapacitors

Graphene materials were synthesized by reduction of exfoliated graphene oxide sheets by hydrazine hydrate and then thermally treated in nitrogen to improve the surface area and their electrochemical performance as electrical double-layer capacitor electrodes. The structural and surface properties of the prepared reduced graphite oxide (RGO) were investigated using atomic force microscopy, scanning electron microscopy, Raman spectra, X-ray diffraction, and nitrogen adsorption / desorption. RGO forms a continuous network of crumpled sheets, which consist of numerous few-layer and single-layer graphenes. Electrochemical studies were conducted by cyclic voltammetry, impedance spectroscopy, and galvanostatic charge-discharge measurements. The modified RGO materials showed enhanced electrochemical performance, with maximum specific capacitance of 96 F/g, energy density of 12.8 Wh/kg, and power density of 160 kW/kg. The results demonstrate that thermal treatment of RGO at selected conditions is a convenient and efficient method for improving specific capacitance, energy, and power density.

36 MATERIALS SCIENCE↗

Effect of silver incorporation in phase formation and band gap tuning of tungsten oxide thin films

Silver incorporated tungsten oxide thin films are prepared by RF magnetron sputtering technique. The effect of silver incorporation in micro structure evolution, phase enhancement, band gap tuning and other optical properties are investigated using techniques such as x-ray diffraction, micro-Raman spectroscopy, atomic force microscopy, scanning electron microscopy, energy dispersive x-ray spectroscopy, and UV-Visible spectroscopy. Effect of silver addition in phase formation and band gap tuning of tungsten oxide thin films are investigated. It is found that the texturing and phase formation improves with enhancement in silver content. It is also found that as the silver incorporation enhances the thickness of the films increases at the same time the strain in the film decreases. Even without annealing the desired phase can be achieved by doping with silver. A broad band centered at the wavelength 437 nm is observed in the absorption spectra of tungsten oxide films of higher silver incorporation and this can be attributed to surface plasmon resonance of silver atoms present in the tungsten oxide matrix. The transmittance of the films is decreased with increase in silver content which can be due to increase in film thickness, enhancement of scattering, and absorption of light caused by the increase of grain size, surface roughness and porosity of films and enhanced absorption due to surface plasmon resonance of silver. It is found that silver can act as the seed for the growth of tungsten oxide grains and found that the grain size increases with silver content which in turn decreases the band gap of tungsten oxide from 3.14 eV to 2.70 eV.

36 MATERIALS SCIENCE↗

Atomic layer deposition of zinc sulfide with Zn(TMHD){sub 2}

The atomic layer deposition (ALD) of ZnS films with Zn(TMHD){sub 2} and in situ generated H{sub 2}S as precursors was investigated, over a temperature range of 150-375 Degree-Sign C. ALD behavior was confirmed by investigation of growth behavior and saturation curves. The properties of the films were studied with atomic force microscopy, scanning electron microscopy, energy-dispersive x-ray spectroscopy, ultraviolet-visible-infrared spectroscopy, and extended x-ray absorption fine structure. The results demonstrate a film that can penetrate a porous matrix, with a local Zn structure of bulk ZnS, and a band gap between 3.5 and 3.6 eV. The ZnS film was used as a buffer layer in nanostructured PbS quantum dot solar cell devices.

36 MATERIALS SCIENCE↗

An approach to preparing porous and hollow metal phosphides with higher hydrodesulfurization activity

This paper describes an effective method for the synthesis of metal phosphides. Bulk and supported Ni{sub 2}P, Cu{sub 3}P, and CoP were prepared by thermal treatment of metal and the amorphous red phosphorus mixtures. Porous and hollow Ni{sub 2}P particles were also synthesized successfully using this method. The structural properties of these products are investigated using X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), inductively coupled plasma (ICP-AES) and X-ray photoemission spectroscopy (XPS). A rational mechanism was proposed for the selective formation of Ni{sub 2}P particles. In experimental conditions, the Ni{sub 2}P/SiO{sub 2} catalyst exhibits excellent hydrodesulfurization (HDS) activity for dibenzothiophene (DBT). - Graphical abstract: Bulk and supported Ni{sub 2}P, Cu{sub 3}P, and CoP were prepared by thermal treatment of their metal and amorphous red phosphorus mixtures. Porous and hollow Ni{sub 2}P particles were successfully synthesized by this method also. In the experimental condition, a Ni{sub 2}P/SiO{sub 2} catalyst exhibits excellent hydrodesulfurization activity for dibenzothiophene. Highlights: > A new synthetic route by heat treating mixtures of metal and red phosphorus in flowing N{sub 2} to prepare corresponding metal phosphides. > Porous and hollow Ni{sub 2}P particles may successfully be obtained using the route. > It is very easy to synthesize other bulk and supported metal phosphides using the mixing of bulk and supported metal and red phosphorus by the method. > The Ni{sub 2}P/SiO{sub 2} catalyst synthesized by the route shows a good HDS of dibenzothiophene. > Its operation is simple (only heat treating pure metal and red phosphorus), and the reaction time is short (only 0.5 h).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Incorporation of lead and titanium into a porous alumina membrane during Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} nanotube synthesis

We report the identification and characteristics of lead aluminate (Pb{sub 2}Al{sub 2}O{sub 5} or PbAl{sub 12}O{sub 19})/aluminum titanate (Al{sub 2}TiO{sub 5}) formed as a result of the interaction between a Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) precursor and a porous alumina membrane (PAM) during PZT nanotube synthesis. The surface morphology and composition of PZT nanotubes were examined as a function of the etching time and annealing temperature, and the diffusion of elements over nanometer length scales during PZT nanotube formation was investigated based on analysis using field emission transmission electron microscopy, scanning transmission electron microscopy, and energy dispersive x-ray microscopy. As the annealing temperature increased, the volume of lead aluminate/aluminum titanate increased, suggesting that considerable diffusion of Pb and Ti occurred and, in turn, dramatically affected the nanotube characteristics. The diffusion of Pb and Ti was clearly evident, resulting in the formation of a distinct lead aluminate/aluminum titanate at the PZT nanotube/PAM interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Solidification structure of C{sub 2.08}Cr{sub 25.43}Si{sub 1.19}Mn{sub 0.43}Fe{sub 70.87} powders fabricated by high pressure gas atomization

Powders of hypoeutectic high chromium white cast iron (C{sub 2.08}Cr{sub 25.43}Si{sub 1.19}Mn{sub 0.43}Fe{sub 70.87}) were produced by high pressure gas atomization. The microstructure of the powders was characterized using light microscopy, scanning electron microscopy and X-ray diffraction. The results showed that the as-atomized powders were mainly composed of austenite and M{sub 7}C{sub 3} (M = Fe, Cr) type carbide, and became ferrite and carbide after annealing. With the decrease of the powder diameter, the number of austenite grains, primary dendrite length and second dendrite arm spacing were decreased. The relationship between cooling rate and microstructure was also determined.

36 MATERIALS SCIENCE↗

Hard x-ray photoelectron spectroscopy using an environmental cell with silicon nitride membrane windows

We applied hard x-ray photoelectron spectroscopy (HAXPES) to a sample under ambient pressure conditions using an environmental cell with an approximately 24 nm-thick SiN{sub x} membrane window. As a model chemical substance, europium (II) iodide (EuI{sub 2}) sealed in the cell with argon gas was investigated with HAXPES to identify the chemical species present inside the cell. The optical and morphological properties of the sample within the cell were measured with optical and fluorescent microscopy, scanning electron microscopy, cathodoluminescence, and energy dispersive x-ray spectrometry. We confirmed the effectiveness of the gas barrier properties of the cell with the SiN{sub x} window and demonstrated its applicability to various other optical and electron measurements as well as HAXPES.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterizing the Effect of Thermal Processing on Feedstock Al Alloy Powder for Additive Manufacturing Applications

Gas-atomized metallic powders are commonly used in additive manufacturing processes. Research has shown that, for certain AM techniques, the chemistry and microstructural properties of the feedstock powders significantly affect the properties of the consolidated material. Understanding the powder characteristics before use in additive manufacturing can lead to optimizing properties of additively manufactured materials as well as determining the recyclability of feedstock powders. This research studies the effect of various solution treatment processes on the characteristics and microstructural evolution of powder aluminum alloy 6061. Solution treatment times and temperatures were guided by thermodynamic and kinetic modeling. Light microscopy, scanning electron microscopy, and hardness were used to evaluate each condition in both two and three dimensions. Results indicate that the Mg{sub 2}Si present in the untreated condition dissolves after 60 min of solution treatment, while there are competing effects from the dissolution and concurrent growth of various Fe-containing phases. Additionally, it is shown that both granular and sub-granular structures exist in these rapidly solidified powders, and the sub-grains reorient themselves during solution treatment.

36 MATERIALS SCIENCE↗

Correcting nonlinear drift distortion of scanning probe and scanning transmission electron microscopies from image pairs with orthogonal scan directions

Unwanted motion of the probe with respect to the sample is a ubiquitous problem in scanning probe and scanning transmission electron microscopies, causing both linear and nonlinear artifacts in experimental images. We have designed a procedure to correct these artifacts by using orthogonal scan pairs to align each measurement line-by-line along the slow scan direction, by fitting contrast variation along the lines. We demonstrate the accuracy of our algorithm on both synthetic and experimental data and provide an implementation of our method.

36 MATERIALS SCIENCE↗

Characterization of a ternary Al-Pd-Rh alloy

The characterization of phases in a ternary Al-Pd-Rh complex metallic alloy annealed at 1100 deg. C for 49 h before (original state) and after differential thermal analysis was performed. In the investigation, light microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, wavelength dispersive X-ray spectroscopy, and differential thermal analysis were used. The dominant constituent in the original state was characterized as {epsilon}-phase. The minor constituent was attributed to the additionally solidified liquid co-existing with {epsilon}-phase at 1100 deg. C. After differential thermal analysis, the microstructure of the alloy was composed of the matrix {epsilon}-phase and the areas of the creek-type morphology.

36 MATERIALS SCIENCE↗