Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SWITCHES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Hierarchically Self-Assembled Block Copolymer Blends for Templating Hollow Phase-Change Nanostructures with an Extremely Low Switching Current

Phase change memory (PCM) is one of the most promising candidates for next-generation nonvolatile memory devices because of its high speed, excellent reliability, and outstanding scalability. But, the high switching current of PCM devices has been a critical hurdle to realize low-power operation. Although one solution is to reduce the switching volume of the memory, the resolution limit of photolithography hinders further miniaturization of device dimensions. Here, we employed unconventional self-assembly geometries obtained from blends of block copolymers (BCPs) to form ring-shaped hollow PCM nanostructures with an ultrasmall contact area between a phase-change material (Ge 2 Sb 2 Te 5 ) and a heater (TiN) electrode. The high-density (approximately 0.1 terabits per square inch) PCM nanoring arrays showed extremely small switching current of 2-3 mu A. Furthermore, the relatively small reset current of the ring-shaped PCM compared to the pillar-shaped devices is attributed to smaller switching volume, which is well supported by electro-thermal simulation results. Our approach may also be extended to other nonvolatile memory device applications such as resistive switching memory and magnetic storage devices, where the control of nanoscale geometry can significantly affect device performances.

36 MATERIALS SCIENCE↗

Structure of the torque ring of the flagellar motor and the molecular basis for rotational switching

The flagellar motor drives the rotation of flagellar filaments at hundreds of revolutions per second, efficiently propelling bacteria through viscous media. The motor uses the potential energy from an electrochemical gradient of cations across the cytoplasmic membrane to generate torque. A rapid switch from anticlockwise to clockwise rotation determines whether a bacterium runs smoothly forward or tumbles to change its trajectory. A protein called FliG forms a ring in the rotor of the flagellar motor that is involved in the generation of torque through an interaction with the cation-channel-forming stator subunit MotA. FliG has been suggested to adopt distinct conformations that induce switching but these structural changes and the molecular mechanism of switching are unknown. Here we report the molecular structure of the full-length FliG protein, identify conformational changes that are involved in rotational switching and uncover the structural basis for the formation of the FliG torque ring. This allows us to propose a model of the complete ring and switching mechanism in which conformational changes in FliG reverse the electrostatic charges involved in torque generation.

59 BASIC BIOLOGICAL SCIENCES↗

Engineering the temporal dynamics of all-optical switching with fast and slow materials

Abstract All-optical switches control the amplitude, phase, and polarization of light using optical control pulses. They can operate at ultrafast timescales – essential for technology-driven applications like optical computing, and fundamental studies like time-reflection. Conventional all-optical switches have a fixed switching time, but this work demonstrates that the response-time can be controlled by selectively controlling the light-matter-interaction in so-called fast and slow materials. The bi-material switch has a nanosecond response when the probe interacts strongly with titanium nitride near its epsilon-near-zero (ENZ) wavelength. The response-time speeds up over two orders of magnitude with increasing probe-wavelength, as light’s interaction with the faster Aluminum-doped zinc oxide (AZO) increases, eventually reaching the picosecond-scale near AZO’s ENZ-regime. This scheme provides several additional degrees of freedom for switching time control, such as probe-polarization and incident angle, and the pump-wavelength. This approach could lead to new functionalities within key applications in multiband transmission, optical computing, and nonlinear optics.

42 ENGINEERING↗

Multi-level, forming and filament free, bulk switching trilayer RRAM for neuromorphic computing at the edge

CMOS-RRAM integration holds great promise for low energy and high throughput neuromorphic computing. However, most RRAM technologies relying on filamentary switching suffer from variations and noise, leading to computational accuracy loss, increased energy consumption, and overhead by expensive program and verify schemes. We developed a filament-free, bulk switching RRAM technology to address these challenges. We systematically engineered a trilayer metal-oxide stack and investigated the switching characteristics of RRAM with varying thicknesses and oxygen vacancy distributions to achieve reliable bulk switching without any filament formation. We demonstrated bulk switching at megaohm regime with high current nonlinearity, up to 100 levels without compliance current. We developed a neuromorphic compute-in-memory platform and showcased edge computing by implementing a spiking neural network for an autonomous navigation/racing task. Our work addresses challenges posed by existing RRAM technologies and paves the way for neuromorphic computing at the edge under strict size, weight, and power constraints.

97 MATHEMATICS AND COMPUTING↗

Tunable multistate field-free switching and ratchet effect by spin-orbit torque in canted ferrimagnetic alloy

Spin-orbit torque is not only a useful probe to study manipulation of magnetic textures and magnetic states at the nanoscale but also it carries great potential for next-generation computing applications. Here we report the observation of rich spin-orbit torque switching phenomena such as field-free switching, multistate switching, memristor behavior and ratchet effect in a single shot, co-sputtered, rare earth-transition metal Gd x Co 100-x . Notably such effects have only been observed in antiferromagnet/ferromagnet bi-layer systems previously. We show that these effects can be traced to a large anistropic canting, that can be engineered into the Gd x Co 100-x system. Further, we show that the magnitude of these switching phenomena can be tuned by the canting angle and the in-plane external field. The complex spin-orbit torque switching observed in canted Gd x Co 100-x not only provides a platform for spintronics but also serves as a model system to study the underlying physics of complex magnetic textures and interactions.

36 MATERIALS SCIENCE↗

Ferroelectric switching of a two-dimensional metal

A ferroelectric is a material with a polar structure whose polarity can be reversed (switched) by applying an electric field. In metals, itinerant electrons screen electrostatic forces between ions, which explains in part why polar metals are very rare. Screening also excludes external electric fields, apparently ruling out the possibility of ferroelectric switching. However, in principle, a thin enough polar metal could be sufficiently penetrated by an electric field to have its polarity switched. In this paper we show that the topological semimetal WTe 2 provides an embodiment of this principle. Although monolayer WTe 2 is centro-symmetric and thus non-polar, the stacked bulk structure is polar. We find that two- or three-layer WTe 2 exhibits spontaneous out-of-plane electric polarization that can be switched using gate electrodes. We directly detect and quantify the polarization using graphene as an electric-field sensor. Moreover, the polarization states can be differentiated by conductivity and the carrier density can be varied to modify the properties. Finally, the temperature at which polarization vanishes is above 350 kelvin, and even when WTe 2 is sandwiched between graphene layers it retains its switching capability at room temperature, demonstrating a robustness suitable for applications in combination with other two-dimensional materials.

36 MATERIALS SCIENCE↗

Spin–orbit torque switching of a ferromagnet with picosecond electrical pulses

The development of approaches that can efficiently control the magnetization of magnetic materials is central to the creation of fast and low-power spintronic devices. Spin transfer torque can be used to electrically manipulate magnetic order in devices, but is typically limited to nanosecond timescales. Alternatively, spin–orbit torque can be employed, and switching with current pulses down to ~200 ps has been demonstrated. However, the upper limit to magnetization switching speed remains unestablished. Here, we show that photoconductive switches can be used to apply 6-ps-wide electrical pulses and deterministically switch the out-of-plane magnetization of a common thin cobalt film via spin–orbit torque. We probe the ultrafast magnetization dynamics due to spin–orbit torques with sub-picosecond resolution using the time-resolved magneto-optical Kerr effect (MOKE). We also estimate that the magnetization switching consumes less than 50 pJ in micrometre-sized devices.

42 ENGINEERING↗

Exchange bias switching in an antiferromagnet/ferromagnet bilayer driven by spin-orbit torque

Here the electrical manipulation of magnetization and exchange bias in antiferromagnet/ferromagnet thin films could be of use in the development of the next generation of spintronic devices. Current-controlled magnetization switching can be driven by spin-orbit torques generated in an adjacent heavy metal layer, but these structures are difficult to integrate with exchange bias switching and tunnelling magnetoresistance measurements. Here, we report the current-induced switching of the exchange bias field in a perpendicularly magnetized IrMn/CoFeB bilayer structure using a spin-orbit torque generated in the antiferromagnetic IrMn layer. By manipulating the current direction and amplitude, independent and repeatable switching of the magnetization and exchange bias field below the blocking temperature can be achieved. The critical current density for the exchange bias switching is found to be larger than that for CoFeB magnetization reversal. X-ray magnetic circular dichroism, polarized neutron reflectometry measurements and micromagnetic simulations show that a small net magnetization within the IrMn interface plays a crucial role in these phenomena.

42 ENGINEERING↗

Coexistence of unipolar and bipolar resistive switching characteristics in ZnO thin films

This paper reports the coexistence of unipolar and bipolar resistive switching (BRS) in an Ag/ZnO/Pt structure fabricated by sputtering deposition at room temperature. The structure shows reproducible and stable unipolar resistive switching after electroforming with high compliance current (I{sub c})=40 mA, regardless of the applied voltage polarity. With low I{sub c}=5 mA at electroforming, BRS was also observed; this phenomenon depended on the voltage polarity. Both states were stable and reproducible over 100 cycles. The switching mode was changed with adjusting I{sub c} but the transition was irreversible. Based on the results, switching mechanism based on filament theory is proposed to explain both resistive switching.

36 MATERIALS SCIENCE↗

Fast deterministic switching in orthogonal spin torque devices via the control of the relative spin polarizations

We model 100 ps pulse switching dynamics of orthogonal spin transfer (OST) devices that employ an out-of-plane polarizer and an in-plane polarizer. Simulation results indicate that increasing the spin polarization ratio, C{sub P} = P{sub IPP}/P{sub OPP}, results in deterministic switching of the free layer without over-rotation (360° rotation). By using spin torque asymmetry to realize an enhanced effective P{sub IPP}, we experimentally demonstrate this behavior in OST devices in parallel to anti-parallel switching. Modeling predicts that decreasing the effective demagnetization field can substantially reduce the minimum C{sub P} required to attain deterministic switching, while retaining low critical switching current, I{sub p} ∼ 500 μA.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanosecond switching in GeSe phase change memory films by atomic force microscopy

Nanosecond scale threshold switching is investigated with conducting atomic force microscopy (AFM) for an amorphous GeSe film. Switched bits exhibit 2–3 orders of magnitude variations in conductivity, as demonstrated in phase change based memory devices. Through the nm-scale AFM probe, this crystallization was achieved with pulse durations of as low as 15 ns, the fastest reported with scanning probe based methods. Conductance AFM imaging of the switched bits further reveals correlations between the switched volume, pulse amplitude, and pulse duration. The influence of film heterogeneities on switching is also directly detected, which is of tremendous importance for optimal device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of carbon content on the copper-telluride phase formation and on the resistive switching behavior of carbon alloyed Cu-Te conductive bridge random access memory cells

In this paper, we investigate the influence of the carbon content on the Cu-Te phase formation and on the resistive switching behavior in carbon alloyed Cu{sub 0.6}Te{sub 0.4} based conductive bridge random access memory (CBRAM) cells. Carbon alloying of copper-tellurium inhibits the crystallization, while attractive switching behavior is preserved when using the material as Cu-supply layer in CBRAM cells. The phase formation is first investigated in a combinatorial way. With increasing carbon content, an enlargement of the temperature window in which the material stays amorphous was observed. Moreover, if crystalline phases are formed, subsequent phase transformations are inhibited. The electrical switching behavior of memory cells with different carbon contents is then investigated by implementing them in 580 μm diameter dot TiN/Cu{sub 0.6}Te{sub 0.4}-C/Al{sub 2}O{sub 3}/Si memory cells. Reliable switching behavior is observed for carbon contents up to 40 at. %, with a resistive window of more than 2 orders of magnitude, whereas for 50 at. % carbon, a higher current in the off state and only a small resistive window are present after repeated cycling. This degradation can be ascribed to the higher thermal and lower drift contribution to the reset operation due to a lower Cu affinity towards the supply layer, leading cycle-after-cycle to an increasing amount of Cu in the switching layer, which contributes to the current. The thermal diffusion of Cu into Al{sub 2}O{sub 3} under annealing also gives an indication of the Cu affinity of the source layer. Time of flight secondary ion mass spectroscopy was used to investigate this migration depth in Al{sub 2}O{sub 3} before and after annealing, showing a higher Cu, Te, and C migration for high carbon contents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-transfer switching of orthogonal spin-valve devices at cryogenic temperatures

We present the quasi-static and dynamic switching characteristics of orthogonal spin-transfer devices incorporating an out-of-plane magnetized polarizing layer and an in-plane magnetized spin valve device at cryogenic temperatures. Switching at 12 K between parallel and anti-parallel spin-valve states is investigated for slowly varied current as well as for current pulses with durations as short as 200 ps. We demonstrate 100% switching probability with current pulses 0.6 ns in duration. We also present a switching probability diagram that summarizes device switching operation under a variety of pulse durations, amplitudes, and polarities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-orbit torque-driven magnetization switching and thermal effects studied in Ta\CoFeB\MgO nanowires

We demonstrate magnetization switching in out-of-plane magnetized Ta\CoFeB\MgO nanowires by current pulse injection along the nanowires, both with and without a constant and uniform magnetic field collinear to the current direction. We deduce that an effective torque arising from spin-orbit effects in the multilayer drives the switching mechanism. While the generation of a component of the magnetization along the current direction is crucial for the switching to occur, we observe that even without a longitudinal field thermally generated magnetization fluctuations can lead to switching. Analysis using a generalized Néel-Brown model enables key parameters of the thermally induced spin-orbit torques-driven switching process to be estimated, such as the attempt frequency and the effective energy barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the bipolar resistive-switching characteristics of Al₂O₃- and HfO₂-based memory cells operated in the soft-breakdown regime

In this article, we investigate extensively the bipolar-switching properties of Al₂O₃- and HfO₂-based resistive-switching memory cells operated at low current down to <1 μA. We show that the switching characteristics differ considerably from those typically reported for larger current range (>15 μA), which we relate as intrinsic to soft-breakdown (SBD) regime. We evidence a larger impact of the used switching-oxide in this current range, due to lower density of oxygen-vacancy (V{sub o}) defects in the SBD regime. In this respect, deep resetting and large memory window may be achieved using the stoichiometric Al₂O₃ material due to efficient V{sub o} annihilation, although no complete erasure of the conductive-filament (CF) is obtained. We finally emphasize that the conduction may be described by a quantum point-contact (QPC) model down to very low current level where only a few V{sub o} defects compose the QPC constriction. The large switching variability inherent to this latter aspect is mitigated by CF shape tuning through adequate engineering of an Al₂O₃\HfO₂ bilayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of DC-contact RF MEMS switch with temperature stability

In order to improve the temperature stability of DC-contact RF MEMS switch, a thermal buckle-beam structure is implemented. The stability of the switch pull-in voltage versus temperature is not only improved, but also the impact of stress and stress gradient on the drive voltage is suppressed. Test results show that the switch pull-in voltage is less sensitive to temperature between -20 °C and 100 °C. The variable rate of pull-in voltage to temperature is about -120 mV/°C. The RF performance of the switch is stable, and the isolation is almost independent of temperature. After being annealed at 280 °C for 12 hours, our switch samples, which are suitable for packaging, have less than 1.5% change in the rate of pull-in voltage.

36 MATERIALS SCIENCE↗

Simulation and characterization of a laterally-driven inertial micro-switch

A laterally-driven inertial micro-switch was designed and fabricated using surface micromachining technology. The dynamic response process was simulated by ANSYS software, which revealed the vibration process of movable electrode when the proof mass is shocked by acceleration in sensitive direction. The test results of fabricated inertial micro-switches with and without anti-shock beams indicated that the contact process of micro-switch with anti-shock beams is more reliable than the one without anti-shock beams. The test results indicated that three contact signals had been observed in the contact process of the inertial switch without anti-shock beams, and only one contact signal in the inertial switch with anti-shock beams, which demonstrated that the anti-shock beams can effectively constrain the vibration in non-sensitive direction.

36 MATERIALS SCIENCE↗

Resistive switching behavior of RF magnetron sputtered ZnO thin films

The resistive switching characteristics of RF magnetron sputtered zinc oxide thin films have been studied. The x-ray diffraction studies confirm the formation of crystalline ZnO on Pt/TiO{sub 2}/SiO{sub x}/Si substrate. We have fabricated Cu/ZnO/Pt device using a shadow masking technique for resistive switching study. Our Cu/ZnO/Pt device exhibits a unipolar resistive switching behaviour. The switching observed in our device could be related to oxygen vacancies or Cu ions that generate the conducting filaments responsible for resistive switching. We found HRS to LRS resistance ratio of as high as ∼200 for our Cu/ZnO/Pt device. The higher resistance ratio and stability of Cu/ZnO/Pt device would make our RF magnetron sputtered zinc oxide thin films suitable for non volatile memory applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗