Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SERVICE MODULE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

The design and application of an infrared simulator for thermal vacuum testing

An infrared simulator was developed and installed in SIM Chamber A in support of the Apollo lunar-exploration mission thermal vacuum testing. The simulator was designed to provide thermal simulation of the radiation emitted and reflected by the lunar surface incident on the Apollo service module in a 60-mile-altitude lunar orbit. The infrared simulator comprises 18 individually controlled zones that provide the irradiance profiles over a 180 deg arc around the spacecraft, simulating the flux levels of equatorial, polar, and 45 deg lunar orbits.

Skinner, D. J.↗

Full-scale Skylab Apollo telescope mount deployment tests

During the initial stages of the NASA Skylab orbit, the Apollo telescope mount (ATM) is deployed by the deployment assembly (DA) which clears the multiple docking adapter axial docking port. This is an essential prerequisite to docking the command service module with the orbital workshop and subsequent occupancy of the workshop by the Apollo three-man crew. The objectives of the full-scale NASA Skylab ATM deployment test program were (1) to evaluate the design concept of the DA and deployment mechanisms while functioning in a zero-g environment with simulated ATM mass properties and (2) to evaluate the effects of handling, transporting, and deployment with respect to the structural geometry and stability of the DA.

Fricker, G. F.↗

S-band transponder experiment

The experiment which derives data from three lunar-orbiting objects, the command-service module (CSM), the lunar module (LM), and the subsatellite in the S-band is described. Each provides detailed information on the near-side lunar gravitational field. The primary emphasis is on the low-altitude (20 km) CSM data. The LM data cover a very short time span and are somewhat redundant with the CSM data. The resolution of the high-altitude (100 km) CSM data is not as great as that of the low altitude data. The low-altitude CSM and LM data coverage and the complementary coverage obtained during the Apollo 14 mission are presented. The experiment uses the same technique of gravity determination employed on the Lunar Orbiter, in the data of which the large anomalies called mascons were first observed. The data consist of variations in the spacecraft speed as measured by the Earth-based radio tracking system.

Sjogren, W. L.↗

Surface disturbances at the Apollo 15 landing site, part E

High resolution panoramic photographs taken from 110 km orbits of the command service module show the lunar module structure on the moon as evidenced by reflected light and by the shadow. Before and after photographs of the landing site are presented; the increased brightness or halo is attributed to mare surface materials.

Hinners, N. W.↗

The cryogenics analysis program for Apollo mission planning and analysis

The cryogenics analysis program was developed as a simplified tool for use in premission planning operations for the Apollo command service module. Through a dynamic development effort, the program has been extended to include real time and postflight analysis capabilities with nominal and contingency planning features. The technical aspects of the program and a comparison of ground test and mission data with data generated by using the cryogenics analysis program are presented. The results of the program capability to predict flight requirements also are presented. Comparisons of data from the program with data from flight results, from a tank qualifications program, and from various system anomalies that have been encountered are discussed. Future plans and additional considerations for the program also are included. Among these plans are a three tank management scheme for hydrogen, venting profile generation for Skylab, and a capability for handling two gas atmospheres. The plan for two gas atmospheres will involve the addition of the capability to handle nitrogen as well as oxygen and hydrogen.

Scott, W.↗

Apollo experience report: Thermal protection from engine-plume environments

Portions of the combined Apollo spacecraft (the command and service module and the lunar module) are subjected to the impingement of hot exhaust gases from the various propulsion systems of the modules. The configurations of the vehicles and the sources of impinging engine plumes are described. A typical Apollo mission is outlined. Protection and design-verification methods are discussed. Finally, recommendations are made for future spacecraft programs.

Taylor, J. T.↗

Apollo 15 Mission Report

A detailed discussion is presented of the Apollo 15 mission, which conducted exploration of the moon over longer periods, greater ranges, and with more instruments of scientific data acquisition than previous missions. The topics include trajectory, lunar surface science, inflight science and photography, command and service module performance, lunar module performance, lunar surface operational equipment, pilot's report, biomedical evaluation, mission support performance, assessment of mission objectives, launch phase summary, anomaly summary, and vehicle and equipment descriptions. The capability of transporting larger payloads and extending time on the moon were demonstrated. The ground-controlled TV camera allowed greater real-time participation by earth-bound personnel. The crew operated more as scientists and relied more on ground support team for systems monitoring. The modified pressure garment and portable life support system provided better mobility and extended EVA time. The lunar roving vehicle and the lunar communications relay unit were also demonstrated.

Source record↗

Apollo 16: Thirty day failure and anomaly listing report

The significant anomalies that occurred on the Apollo 16 flight are presented. The major areas under which failures and anomalies are identified are: (1) command and service modules, (2) lunar module, (3) government-furnished equipment, lunar surface experiments, and orbital experiments. All times shown are elapsed time from range zero, established as the integral second before lift-off. Diagrams and photographs of equipment are included to clarify written explanations.

Source record↗

Apollo experience report: Battery subsystem

Experience with the Apollo command service module and lunar module batteries is discussed. Significant hardware development concepts and hardware test results are summarized, and the operational performance of batteries on the Apollo 7 to 13 missions is discussed in terms of performance data, mission constraints, and basic hardware design and capability. Also, the flight performance of the Apollo battery charger is discussed. Inflight data are presented.

Trout, J. B.↗

CSM docked DAP/orbital assembly bending interaction-axial case

A digital autopilot which can provide attitude control for the entire Skylab orbital assembly using the service module reaction control jets is described. An important consideration is the potential interaction of the control system with the bending modes of the orbital assembly. Two aspects of this potential interaction were considered. The first was the possibility that bending induced rotations feeding back through the attitude sensor into the control system could produce an instability or self-sustained oscillation. The second was whether the jet activity commanded by the control system could produce excessive loads at any of the critical load points of the orbital assembly. Both aspects were studied by using analytic techniques and by running simulations on the all-digital simulator.

Turnbull, J. F.↗

Skylab status report.

The laboratory will be launched on Apr. 30, 1973, aboard a Saturn V vehicle. Approximately twenty-three and a half hours later the first crew will be launched in a command and service module aboard a Saturn IB launch vehicle. The laboratory will consist of modules. The orbital workshop (OWS) is made from the liquid oxygen and liquid hydrogen tanks of a Saturn S-IVB third stage. The OWS contains the living quarters and two experiments areas. The airlock sits on top of the OWS and contains the controls and hatch for the extra-vehicular activity.

Conrad, C., Jr.↗

Apollo 15 orbital science summary.

In this paper, summary results of the Apollo 15 orbital science payload are given, and some quick-look results of Apollo 16 are discussed. Geochemical instruments, consisting of gamma-ray, X-ray, and alpha particle spectrometers, have provided a chemical map of the lunar surface flown over by Apollo 15. The Laser Altimeter and frontside gravity data have shown some unexpected results with regard to the lunar shape, and provided new basis for understanding lunar mascons. A magnetometer, aboard the small subsatellite, has located magnetic anomalies principally on the lunar farside, and has shown that the small lunar magnetic field is smoother on the frontside than on the back. The mass spectrometer, in orbit aboard the Command and Service Modules, has measured unexpectedly large populations of molecules at orbital altitude (110 km), mostly due to spacecraft contamination. Two major camera systems have provided the first systematic metric quality photography and concurrent high resolution stereo coverage of the lunar surface.

Esenwein, G. F.↗

Lunar composition from Apollo orbital measurements

Several spectrometers carried in the Service Module of the Apollo 15 and Apollo 16 spacecraft were employed for the compositional mapping of the lunar surface. The observations involved the measurements of secondary (fluorescent) X-rays, gamma rays and alpha particle emissions. A large scale compositional map of over 20 percent of the lunar surface was obtained for the first time. It was possible to demonstrate interesting chemical differences between the mare and the highlands, to find specific areas of high radioactivity and to learn something about the composition of the moon's hidden side. Further the same devices were used to obtain useful astronomical data during the return to earth.

Adler, I.↗

The cosmic gamma-ray spectrum between 0.3 and 27 MeV measured on the Apollo 15

The spectrum of the total (diffuse and discrete sources) cosmic gamma-ray background over the 0.3 to 27 MeV range was measured with a 7.0 cm diameter x 7.0 cm long uncollimated NaI(Tl) scintillation counter located on a boom 7.6 m from the Apollo 15 service module. Data on cosmic gamma-rays were taken during transearth coast at various boom extensions, detector gains, and with the plastic anticoincidence scintillator enabled and disabled.

Trombka, J. I.↗

Data user's note: Apollo 15 lunar photography

Brief descriptions are given of the Apollo 15 mission objectives, photographic equipment, and photographic coverage and quality. The lunar photographic tasks were: (1) ultraviolet photography of the earth and moon; (2) photography of the gegenschein from lunar orbit; (3) service module orbital photographic tasks; and (4) command module photographic tasks.

Cameron, W. S.↗

The Apollo 17 far ultraviolet spectrometer experiment

The Apollo 17 command service module in lunar orbit will carry a far ultraviolet scanning spectrometer whose prime mission will be to measure the composition of the lunar atmosphere. Additional observations will include the spectral lunar albedo, the temporary atmosphere injected by the engines of the lunar exploration module, the solar system atmosphere, the galactic atmosphere and the spectra of astronomical sources, including the earth. A detailed description of the experimental equipment which observes the spectral range 1180 to 1680 A, the observing program and broad speculation about the possible results of the experiment, are presented.

Fastie, W. G.↗

Apollo 17, 30 day failure and anomaly listing report

The significant anomalies that occurred during the Apollo 17 mission are investigated. The discussion is divided into five major sections: command and service modules, lunar module, government-furnished equipment, lunar surface experiments, and orbital experiments. All times are elapsed time from range zero, established as the integral second before lift-off.

Source record↗

Skylab 2 space vehicle data evaluation guide

Vehicle telemetry measurements for all stages of Skylab 2 are presented. The data sources for the launch vehicle and command service module are identified. The data evaluation guide format is described. The system for designating the components of the spacecraft is defined. A list of abbreviations for technical terms used in the reporting documents is included.

Source record↗