Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCANDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Environmental stability of candidate dielectrics for GaN-based device applications

The thermal and chemical stability of potential dielectrics for GaN-based devices in a GaN metal organic chemical vapor deposition (MOCVD) environment is investigated, and their suitability for use as a gate dielectric and as a regrowth mask for the selective area growth of GaN is discussed. Thin films of MgO, Sc{sub 2}O{sub 3}, and Sc{sub 2}O{sub 3}/MgO were grown by molecular beam epitaxy on GaN/sapphire substrates and then annealed in a MOCVD reactor under GaN growth conditions except for the lack of trimethylgallium. All films were processed into metal-oxide-semiconductor diodes and were characterized before and after being annealed using atomic force microscopy, x-ray reflectivity, x-ray photoelectron spectroscopy, current-voltage (I-V), and capacitance-voltage (C-V) measurements. The Gibbs free energy of all possible reactions was calculated, and their probability and possible influence on the characterization results is examined. After being annealed, the atomic force microscopy of the oxide films showed some degree of roughening for all of them. Despite the surface roughening, all the oxide films examined showed potential for use as a regrowth mask. The MOCVD anneal caused the electrical properties of the MgO film to degrade considerably, and the Sc{sub 2}O{sub 3} films were unable to be electrically characterized after annealing due to shorting, which is believed to be caused by the formation of a ScN layer on the surface. The effect of the thickness of the Sc{sub 2}O{sub 3} cap for MgO films was investigated. The characterization results indicate that the Sc{sub 2}O{sub 3} film dissolved into MgO during annealing and that a ScN film did not form on the surface. Of all the oxide films examined in this study, the Sc{sub 2}O{sub 3}/MgO stack with the thinner Sc{sub 2}O{sub 3} cap exhibited the greatest stability with respect to its electrical properties.

36 MATERIALS SCIENCE↗

TRENDS IN {sup 44}Ti AND {sup 56}Ni FROM CORE-COLLAPSE SUPERNOVAE

We compare the yields of {sup 44}Ti and {sup 56}Ni produced from post-processing the thermodynamic trajectories from three different core-collapse models-a Cassiopeia A progenitor, a double shock hypernova progenitor, and a rotating two-dimensional explosion-with the yields from exponential and power-law trajectories. The peak temperatures and densities achieved in these core-collapse models span several of the distinct nucleosynthesis regions we identify, resulting in different trends in the {sup 44}Ti and {sup 56}Ni yields for different mass elements. The {sup 44}Ti and {sup 56}Ni mass fraction profiles from the exponential and power-law profiles generally explain the tendencies of the post-processed yields, depending on which regions are traversed by the model. We find that integrated yields of {sup 44}Ti and {sup 56}Ni from the exponential and power-law trajectories are generally within a factor two or less of the post-process yields. We also analyze the influence of specific nuclear reactions on the {sup 44}Ti and {sup 56}Ni abundance evolution. Reactions that affect all yields globally are the 3{alpha}, p(e{sup -}, {nu}{sub e})n and n(e{sup +},{nu}-bar{sub e})p. The rest of the reactions are ranked according to their degree of impact on the synthesis of {sup 44}Ti. The primary ones include {sup 44}Ti({alpha}, p){sup 47}V, {sup 40}Ca({alpha}, {gamma}){sup 44}Ti, {sup 45}V(p, {gamma}){sup 46}Cr, {sup 40}Ca({alpha}, p){sup 43}Sc, {sup 17}F({alpha}, p){sup 20}Ne, {sup 21}Na({alpha}, p){sup 24}Mg, {sup 41}Sc(p, {gamma}){sup 42}Ti, {sup 43}Sc(p, {gamma}){sup 44}Ti, {sup 44}Ti(p, {gamma}){sup 45}V, and {sup 57}Ni(p, {gamma}){sup 58}Cu, along with numerous weak reactions. Our analysis suggests that not all {sup 44}Ti need to be produced in an {alpha}-rich freeze-out in core-collapse events, and that reaction rate equilibria in combination with timescale effects for the expansion profile may account for the paucity of {sup 44}Ti observed in supernova remnants.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Production of very neutron-rich nuclei with a {sup 76}Ge beam

Production cross sections for neutron-rich nuclei from the fragmentation of a {sup 76}Ge beam at 132 MeV/u were measured. The longitudinal momentum distributions of 34 neutron-rich isotopes of elements 13{<=}Z{<=}27 were scanned using a novel experimental approach of varying the target thickness. Production cross sections with beryllium and tungsten targets were determined for a large number of nuclei, including 15 isotopes first observed in this work. These are the most neutron-rich nuclides of the elements 17{<=}Z{<=}25 ({sup 50}Cl, {sup 53}Ar, {sup 55,56}K, {sup 57,58}Ca, {sup 59,60,61}Sc, {sup 62,63}Ti, {sup 65,66}V, {sup 68}Cr, and {sup 70}Mn). A one-body Q{sub g} systematics is used to describe the production cross sections based on thermal evaporation from excited prefragments. Some of the fragments near {sup 58}Ca show anomalously large production cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Population of positive-parity states in {sup 53}Sc through one-proton knockout

The one-proton knockout reaction {sup 9}Be({sup 54}Ti,{sup 53}Sc+{gamma})X at 72 MeV/nucleon has been measured. The location of the first 3/2{sup -} state at 2110(3) keV was confirmed, and new {gamma}-ray transitions were observed at 1111(2), 1273(2), 1539(4), and 2495(5) keV. Large spectroscopic strength to excited states in {sup 53}Sc was found and attributed to the knockout of sd-shell protons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fusion hindrance for {sup 27}Al+{sup 45}Sc and other systems with a positive Q value

Fusion evaporation cross sections for the {sup 27}Al+{sup 45}Sc (Q=9.63 MeV) system are measured down to about 300 nb. Deviations from standard coupled-channels calculations were observed in this system at the lowest energies. The steep fall-off of the fusion cross sections can be reproduced by calculations using a shallow potential model, which was originally developed to explain the hindrance behavior of heavy-ion fusion in medium-mass systems with negative Q values. Comparisons of the hindrance behavior between the present experiment and other systems, for example, {sup 28}Si+{sup 30}Si (Q=14.3 MeV) and {sup 36}S+{sup 48}Ca (Q=7.55 MeV) are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evidence for a Change in the Nuclear Mass Surface with the Discovery of the Most Neutron-Rich Nuclei with 17{<=}Z{<=}25

The results of measurements of the production of neutron-rich nuclei by the fragmentation of a {sup 76}Ge beam are presented. The cross sections were measured for a large range of nuclei including 15 new isotopes that are the most neutron-rich nuclides of the elements chlorine to manganese ({sup 50}Cl, {sup 53}Ar, {sup 55,56}K, {sup 57,58}Ca, {sup 59,60,61}Sc, {sup 62,63}Ti, {sup 65,66}V, {sup 68}Cr, {sup 70}Mn). The enhanced cross sections of several new nuclei relative to a simple thermal evaporation framework, previously shown to describe similar production cross sections, indicates that nuclei in the region around {sup 62}Ti might be more stable than predicted by current mass models and could be an indication of a new island of inversion similar to that centered on {sup 31}Na.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evolution of structural distortions in solid solutions between BiMnO{sub 3} and BiScO{sub 3}

Crystal structures of solid solutions of BiMn{sub 1-x}Sc{sub x}O{sub 3} with x=0.05, 0.1, 0.2, 0.3, 0.4, 0.5, and 0.7 were studied with synchrotron X-ray powder diffraction. The strong Jahn-Teller distortion, observed in BiMnO{sub 3} at 300 K and associated with orbital order, disappeared already in BiMn{sub 0.95}Sc{sub 0.05}O{sub 3}. The orbital-ordered phase did not appear in BiMn{sub 0.95}Sc{sub 0.05}O{sub 3} down to 90 K. Almost the same octahedral distortions were observed in BiMn{sub 1-x}Sc{sub x}O{sub 3} with 0.05<=x<=0.7 at room temperature and in BiMnO{sub 3} at 550 K above the orbital ordering temperature T{sub OO}=473 K. These results allowed us to conclude that the remaining octahedral distortions observed in BiMnO{sub 3} above T{sub OO} are the structural feature originated from the highly distorted monoclinic structure. - Graphical Abstract: Compositional dependence of octahedral distortion parameters DELTA(M1O{sub 6}) and DELTA(M2O{sub 6}) in solid solutions BiMn{sub 1-x}Sc{sub x}O{sub 3} at 300 K.

36 MATERIALS SCIENCE↗

Magnetic dilution of the iron sublattice in CoFe{sub 2-x}Sc{sub x}O{sub 4} (0{<=}x{<=}1)

Substitution of Fe for Sc in CoFe{sub 2}O{sub 4} spinel structure is presented. All CoFe{sub 2-x}Sc{sub x}O{sub 4} compounds crystallize in the spinel type structure (space group Fd3-bar m). By using X-ray diffraction studies, magnetic measurements and in-field {sup 57}Fe Moessbauer spectrometry, the limit of substitution has been determined to be equal to x=0.56. An increase in the cell parameter and the strains and a decrease in the apparent crystallites size are observed. For x>0.3, a partial oxidation of cobalt is evidenced and Co{sup 3+} is stabilized in the structure. A ferromagnetic behavior has been observed for all investigated compounds. As x increases, the Curie temperature and the hyperfine fields decrease. Following the Stephenson model, the diminution of T{sub C} is ascribed to a decrease of the main J{sub AB} interaction. -- Graphical abstract: Evolution of the cell parameters, the magnetic properties and the Moessbauer spectra in CoFe{sub 2-r}Sc{sub r}O{sub 4} (0{<=}r{<=}1). Display Omitted

36 MATERIALS SCIENCE↗

The role of nonmagnetic d{sup 0} vs. d{sup 10}B-type cations on the magnetic exchange interactions in osmium double perovskites

Polycrystalline samples of double perovskites Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) were synthesized by solid state reactions. They adopt the cubic double perovskite structures (space group, Fm-3m) with ordered B and Os arrangements. Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) show antiferromagnetic transitions at 93 K, 69 K, and 28 K, respectively. The Weiss-temperatures are −590 K for Ba{sub 2}ScOsO{sub 6}, −571 K for Ba{sub 2}YOsO{sub 6}, and −155 K for Ba{sub 2}InOsO{sub 6}. Sc{sup 3+} and Y{sup 3+} have the open-shell d{sup 0} electronic configuration, while In{sup 3+} has the closed-shell d{sup 10}. This indicates that a d{sup 0} B-type cation induces stronger overall magnetic exchange interactions in comparison to a d{sup 10}. Comparison of Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) to their Sr and Ca analogues shows that the structural distortions weaken the overall magnetic exchange interactions. - Graphical abstract: Magnetic properties of osmium double perovskites Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) were studied. Comparison of Ba{sub 2}BOsO{sub 6}indicates that a d{sup 0} B-type cation induces stronger overall magnetic exchange interactions in comparison to a d{sup 10}. - Highlights: • Magnetic properties of double perovskites Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) were studied. • A d{sup 0}B-type cation induces stronger magnetic interactions than a d{sup 10}. • Structural distortions weaken the overall Os{sup 5+}-Os{sup 5+} magnetic interactions.

36 MATERIALS SCIENCE↗

Nuclear Data Sheets for A = 50

The experimental nuclear spectroscopic data for known nuclides of mass number 50 (Cl,Ar,K,Ca,Sc,Ti,V, Cr,Mn,Fe,Co,Ni) have been evaluated and presented together with Adopted properties for levels and {gamma} rays. This evaluation has been carried out about 15 years after the previous one by Thomas Burrows (1995Bu29). Except for {sup 50}Sc and {sup 50}V, extensive new data have become available for all the other nuclides in the intervening years. The data for {sup 50}Sc and {sup 50}V have also been checked again in detail and several changes made. No data are yet available for excited states in {sup 50}Cl, {sup 50}Ar and {sup 50}Ni. This work supersedes earlier evaluations (1995Bu29, 1990Bu18, 1984Al29, 1976Au07) of A=50 nuclides.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 56

The 1999 publication of Nuclear Data Sheets for A=56 (1999Hu04) has been updated using experimental nuclear structure data and decay data available before November 2009. The information for {sup 56}K, {sup 56}Ca, {sup 56}Sc, {sup 56}Ti, {sup 56}V, {sup 56}Cr, {sup 56}Mn, {sup 56}Fe, {sup 56}Co, {sup 56}Ni, {sup 56}Cu, and {sup 56}Zn from various reaction and decay experiments together with their adopted levels and {gamma} transition properties is summarized and presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 44

The experimental data are evaluated for known nuclides of mass number A=44 (Si,P,S,Cl,Ar,K,Ca,Sc,Ti,V, Cr,Mn). Detailed evaluated level properties and related information are presented, including adopted values of level and {gamma}-ray energies, decay data (energies, intensities and placement of radiations), and other spectroscopic data. This work supersedes earlier full evaluations of A=44 published by 1999Ca45 and 1990En08 (also 1998En04 update). No excited states are known in {sup 44}Si, {sup 44}P, {sup 44}Cr, {sup 44}Mn. Only one excited state is known in 44V and its Isobaric Analog State (IAS) has been observed but with the level energy not known. Information for {sup 44}S, {sup 44}Cl and {sup 44}Ar is limited and their radioactive decay schemes seem incomplete in view of large Q values and known excitations much below than allowed by Q values. The {sup 44}Ca, {sup 44}Sc and {sup 44}Ti nuclides remain as the most extensively studied from many different reactions and decays.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 54

The 2005 evaluation for A=54 (2006Hu08) has been updated. Detailed experimental nuclear structure data and decay data for all nuclei with mass chain A=54 are presented in this current evaluation. The new data and information are given in following datasets: {sup 54}Ca: {sup 9}Be({sup 76}Ge, X) and Be({sup 55}Sc, p), ({sup 56}Ti, 2p) {sup 54}Sc: {sup 54}Ca β{sup −} decay and {sup 54}Sc IT decay {sup 54}Ti: {sup 54}Sc β{sup −} decay {sup 54}Cr: {sup 54}Mn ε decay, {sup 56}Fe(μ, nupng), and {sup 238}U({sup 64}Ni, Xγ) {sup 54}Mn: {sup 51}V({sup 20}Ne, Xγ), {sup 55}Mn(p, pn), and {sup 56}Fe(μ, nu2ng) {sup 54}Fe: {sup 58}Ni α decay, {sup 9}Be({sup 55}Co, Xγ), {sup 54}Fe(e, e'), {sup 54}Fe(p, p'), and Coulomb Excitation {sup 54}Co: {sup 54}Ni ε decay, {sup 55}Cu εp decay, {sup 28}Si({sup 32}S, αpnγ), {sup 54}Fe(p,n), and {sup 54}Fe({sup 3}He, t) {sup 54}Ni: {sup 54}Ni IT decay, {sup 55}Zn εp decay, {sup 9}Be({sup 55}Ni, Xγ), and {sup 24}Mg({sup 32}S, Xγ) {sup 54}Zn: Ni({sup 58}Ni, X)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermal conductivity of (Zr,W)N/ScN metal/semiconductor multilayers and superlattices

The cross-plane thermal conductivities of metal/semiconductor multilayers and epitaxial superlattices have been measured as a function of period by time-domain thermoreflectance at room temperature. (001)-oriented ZrN (metal)/ScN (semiconductor) multilayers and (Zr,W)N/ScN epitaxial superlattices with the rocksalt crystal structure were grown on (001)MgO substrates by reactive magnetron sputtering. A distinct minimum in thermal conductivity at a period of {approx}6 nm is observed for ZrN/ScN multilayers. The minimum thermal conductivity of 5.25 W/m K is a factor of {approx}2.7 smaller than the mean of the thermal conductivities (including only the lattice contributions) of the values measured for films of the constituent materials, and approximately equal to the lattice component of the thermal conductivity of a Zr{sub 0.65}Sc{sub 0.35}N alloy film ({approx}5 W/m K). Alloying the ZrN layers with WN{sub x} reduces the lattice mismatch, yielding epitaxial (Zr,W)N/ScN superlattices. The addition of WN{sub x} also reduces the thermal conductivity to {approx}2 W/m K, a value that is sufficiently low to suggest promise for these materials as solid-state thermionic generators.

36 MATERIALS SCIENCE↗

Cubic Sc{sub 1-x}Al{sub x}N solid solution thin films deposited by reactive magnetron sputter epitaxy onto ScN(111)

Reactive magnetron sputter epitaxy was used to deposit thin solid films of Sc{sub 1-x}Al{sub x}N (0<=x<=1) onto MgO(111) substrates with ScN(111) seed layers. Stoichiometric films were deposited from elemental Sc and Al targets at substrate temperatures of 600 deg. C. The films were analyzed by Rutherford backscattering spectroscopy, elastic recoil detection analysis, x-ray diffraction, and transmission electron microscopy. Results show that rocksalt structure (c)-Sc{sub 1-x}Al{sub x}N solid solutions with AlN molar fractions up to approx60% can be synthesized. For higher AlN contents, the system phase separates into c- and wurtzite structure (w)-Sc{sub 1-x}Al{sub x}N domains. The w-domains are present in three different orientations relative to the seed layer, namely, Sc{sub 1-x}Al{sub x}N(0001)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], Sc{sub 1-x}Al{sub x}N(1011)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], and Sc{sub 1-x}Al{sub x}N(1011)||ScN(113). The results are compared to first-principles density functional theory calculations for the mixing enthalpies of c-, w-, and zinc blende Sc{sub 0.50}Al{sub 0.50}N solid solutions, yielding metastability with respect to phase separation for all temperatures below the melting points of AlN and ScN.

36 MATERIALS SCIENCE↗

Investigation of high Curie temperature (1-x)BiSc{sub 1-y}Fe{sub y}O{sub 3}-xPbTiO{sub 3} piezoelectric ceramics

Ceramics around the morphotropic phase boundary (MPB) in the (1-x)BiSc{sub 1-y}Fe{sub y}O{sub 3}-xPbTiO{sub 3} solid solution were fabricated. For y=0.5, ceramics were single phase, and piezoelectric coefficients (d{sub 33}) and electromechanical coupling coefficients (k{sub p}) for MPB compositions were 300 pC/N and 0.49, respectively; a level of piezoelectric activity similar to that of hard, lead zirconate titanate compositions but with T{sub C}approx60 deg. C higher at approx440 deg. C. For ceramics with y>=0.7, dielectric measurements in combination with diffraction contrast transmission electron microscopy revealed the existence of two ferroelectric phases for most PbTiO{sub 3} contents studied. The presence of two ferroelectric phases was associated with a decrease in piezoelectric activity and although raw materials costs for y=0.7 and 0.8 with respect to y=0 were significantly lower (less Sc{sub 2}O{sub 3}) and T{sub C} greater (approx500 deg. C), d{sub 33} (approx100 pC/N) and k{sub p} (0.18) were too low to be commercially useful for actuator applications.

36 MATERIALS SCIENCE↗

Three-stage evolution of dynamic hysteresis scaling behavior in 63PbTiO{sub 3}-37BiScO{sub 3} bulk ceramics

The ferroelectric hysteresis loops of 63PbTiO{sub 3}-37BiScO{sub 3} ceramics were measured under sinusoidal electric fields in the range of frequency from 0.1 to 100 Hz and field from 5 to 55 kV/cm. The fitting results showed two linear relations existed between the logarithm of hysteresis area <A> and the logarithm of the amplitude of field E{sub 0} in the first and third field region. In the second region, no linear relation existed due to polarization reversal. These three-stage behaviors were distinct from the existing two-stage behaviors. The slopes in the third stage increase with the increasing of frequency, which can be attributed to dielectric loss under high frequency.

36 MATERIALS SCIENCE↗

Level Density Parameter: A Tool to Study the Particle Spectra

The compound nucleus {sup 76}Kr* is formed in the heavy-ion fusion reactions by an asymmetric entrance channel {sup 12}C+{sup 64}Zn and the symmetric entrance channel {sup 31}P+{sup 45}Sc at the excitation energy of 75 MeV and angular momentum of 39 eta. Neutron energy spectra of the asymmetric system ({sup 12}C+{sup 64}Zn) at different angles are well described by the statistical model predictions using the normal value of the level density parameter a = A/8 MeV{sup -1}. However, in the case of the symmetric system ({sup 31}P+{sup 45}Sc), the statistical model interpretation of the data requires the change in the value of a = A/10 MeV{sup -1}. The delayed evolution of the compound system in case of the symmetric {sup 31}P+{sup 45}Sc system may lead to the formation of a temperature equilibrated dinuclear complex, which may be responsible for the neutron emission at higher temperature, while the protons and alpha particles are evap orated after neutron emission when the system is sufficiently cooled down and the higher lambda-values do not contribute in the formation of the compound nucleus for the symmetric entrance channel in case of charged particle emission.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗