Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Remote manipulator system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Mission safety evaluation report for STS-37, postflight edition

STS-37/Atlantis was launched on April 5, 1991 from Kennedy Space Center launch complex 39B at 9:23 a.m. Eastern Standard Time (EST). Launch was delayed 4 minutes 45 seconds because of safety concerns about the low cloud ceiling and the wind direction in the potential blast area. Based on the limited number and type of inflight anomalies encountered, the Space Shuttle operated satisfactorily throughout the STS-37 mission. A contingency EVA was performed by the crew on Flight Day (FD) 3 to free a sticky Gamma Ray Observatory (GRO) high gain antenna, after which the GRO primary payload was successfully deployed by the Orbiter's Remote Manipulator System. The GRO, which weighed just over 35,000 lbs, was the heaviest NASA science satellite ever deployed by the Space Shuttle into low Earth orbit. The scheduled entry/landing on FD 6 was waved off for one day due to high wind conditions at Edwards Air Force Base. Atlantis landed on FD 7, 11 April 1991 on Edwards AFB lakebed runway 33 at 9:55 a.m. Eastern Daylight Time.

Hill, William C.↗
NASA NTRS1992

Electromagnetic attachment mechanism

An electromagnetic attachment mechanism is disclosed for use as an end effector of a remote manipulator system. A pair of electromagnets, each with a U-shaped magnetic core with a pull-in coil and two holding coils, are mounted by a spring suspension system on a base plate of the mechanism housing with end pole pieces adapted to move through openings in the base plate when the attractive force of the electromagnets is exerted on a strike plate of a grapple fixture affixed to a target object. The pole pieces are spaced by an air gap from the strike plate when the mechanism first contacts the grapple fixture. An individual control circuit and power source is provided for the pull-in coil and one holding coil of each electromagnet. A back-up control circuit connected to the two power sources and a third power source is provided for the remaining holding coils. When energized, the pull-in coils overcome the suspension system and air gap and are automatically de-energized when the pole pieces move to grapple and impose a preload force across the grapple interface. A battery backup is a redundant power source for each electromagnet in each individual control circuit and is automatically connected upon failure of the primary source. A centerline mounted camera and video monitor are used in cooperation with a target pattern on the reflective surface of the strike plate to effect targeting and alignment.

Monford, Leo G., Jr.↗
NASA NTRS1991

Designing berthing mechanisms for international compatibility

The paper examines the technological issues regarding common berthing interfaces for the Space Station Freedom and pressurized modules from U.S., European, and Japanese space programs. The development of the common berthing mechanism (CBM) is based on common requirements concerning specifications, launch environments, and the unique requirements of ESA's Man-Tended Free Flyer. The berthing mechanism is composed of an active and a passive half, a remote manipulator system, 4 capture-latch assemblies, 16 structural bolts, and a pressure gage to verify equalization. Extensive graphic and verbal descriptions of each element are presented emphasizing the capture-latch motion and powered-bolt operation. The support systems to complete the interface are listed, and the manufacturing requirements for consistent fabrication are discussed to ensure effective international development.

Winch, John↗
NASA NTRS1992

Space Shuttle orbiter modifications to support Space Station Freedom

The modifications to the Space Shuttle orbiter required to support Space Station Freedom (SSF) assembly and operations are described. Attention is given to berthing modifications, Shuttle Remote Manipulator System upgrades, docking modifications, and Spacelab mission modifications. For SSF assembly missions, the Space Shuttle orbiter will transport elements of the SSF to a 28.5 deg inclination, 220 nm altitude (nominal) orbit.

Segert, Randall↗
NASA NTRS1993

Controls-structures-interaction dynamics during RCS control of the Orbiter/SRMS/SSF configuration

During the assembly flights of the Space Station Freedom (SSF), the Orbiter will either dock with the SSF and retract to the final berthed position, or will grapple the SSF using the Shuttle Remote Manipulator System (SRMS) and maneuver the SRMS coupled vehicles to their final berthed position. The SRMS method is expected to take approximately one to one and a half hours to complete and require periodic attitude corrections by either the Orbiter or the SSF reaction control system (RCS) or continuous control by a control moment gyro (CMG) system with RCS desaturation as required. Free drift of the attached vehicles is not currently thought to be acceptable because the desired system attitude will quickly deteriorate due to unbalanced gravity gradient and aerodynamic torques resulting in power generation problems, thermodynamic control problems, and communications problems. This paper deals with the simulation and control of the SRMS during trunnion/latch interaction dynamics and during RCS maneuvers. The SRMS servo drive joints have highly non-linear elastic characteristics which tend to degrade sensitive control strategies. In addition the system natural frequencies are extremely low and depend on the drive joint deflections and SRMS geometric position. The lowest mean period of oscillation for the Orbiter/SRMS/SSF(MB6) system in brakes hold mode positioned near the final berthed position is approximately 120 seconds. A detailed finite element model of the SRMS has been developed and used in a newly developed SRMS systems dynamics simulation to investigate the non-linear transient response dynamics of the Orbiter/SRMS/SSF systems. The present SRMS control strategy of brakes only recommended by the Charles Draper Labs is contrasted with a robust controller developed by the authors. The robust controller uses an optimal inear quadratic regulator (LQR) to optimally place the closed-loop poles of a multivariable continuous-time system within the common region of an open sector with the sector angle plus or minus 45 degrees from the negative real axis, and the left-hand side of a parallel to the imaginary axis in the complex s-plane. This guarantees that the critical damping ratio for the desired control modes is equal to or in excess of 0.707. The matrix sign function is used for solving the Riccati equations which appear in the controller design procedure. Fast and stable algorithms have recently been developed for the computation of the matrix sign function. Simulation results are given which demonstrate the potential CSI involvement for the current SRMS control system and the proposed control system.

Schliesing, J. A.↗
NASA NTRS1991

Magnetic end effectors for space operations

The Magnetic End Effector (MEE) to be flown as part of the Dexterous End Effector (DEE) flight experiment was designed to operate with the Shuttle Remote Manipulator System (SRMS). Grappling or attachment of payloads is accomplished magnetically with two fault tolerant operations. The small magnetic grapple plate weighs far less than the standard grapple fixture; allows stacking and close spacing of payloads; and eliminates secondary release mechanisms. In addition to specifics regarding the MEE, the DEE project, Magnetic Attachment Tool (MAT), RMS-Force Torque Sensor (RMS-FTS), and Targeting and Reflective Alignment Concept (TRAC) are discussed.

Monford, Leo↗
NASA NTRS1993

Advanced telerobotic control using neural networks

Accurate Automation is designing and developing adaptive decentralized joint controllers using neural networks. We are then implementing these in hardware for the Marshall Space Flight Center PFMA as well as to be usable for the Remote Manipulator System (RMS) robot arm. Our design is being realized in hardware after completion of the software simulation. This is implemented using a Functional-Link neural network.

Pap, Robert M.↗
NASA NTRS1990

Space Station Freedom automation and robotics: An assessment of the potential for increased productivity

This report presents the results of a study performed in support of the Space Station Freedom Advanced Development Program, under the sponsorship of the Space Station Engineering (Code MT), Office of Space Flight. The study consisted of the collection, compilation, and analysis of lessons learned, crew time requirements, and other factors influencing the application of advanced automation and robotics, with emphasis on potential improvements in productivity. The lessons learned data collected were based primarily on Skylab, Spacelab, and other Space Shuttle experiences, consisting principally of interviews with current and former crew members and other NASA personnel with relevant experience. The objectives of this report are to present a summary of this data and its analysis, and to present conclusions regarding promising areas for the application of advanced automation and robotics technology to the Space Station Freedom and the potential benefits in terms of increased productivity. In this study, primary emphasis was placed on advanced automation technology because of its fairly extensive utilization within private industry including the aerospace sector. In contrast, other than the Remote Manipulator System (RMS), there has been relatively limited experience with advanced robotics technology applicable to the Space Station. This report should be used as a guide and is not intended to be used as a substitute for official Astronaut Office crew positions on specific issues.

Weeks, David J.↗
NASA NTRS1990

Evolving technologies for Space Station Freedom computer-based workstations

Viewgraphs on evolving technologies for Space Station Freedom computer-based workstations are presented. The human-computer computer software environment modules are described. The following topics are addressed: command and control workstation concept; cupola workstation concept; Japanese experiment module RMS workstation concept; remote devices controlled from workstations; orbital maneuvering vehicle free flyer; remote manipulator system; Japanese experiment module exposed facility; Japanese experiment module small fine arm; flight telerobotic servicer; human-computer interaction; and workstation/robotics related activities.

Jensen, Dean G.↗
NASA NTRS1990

Space teleoperations technology for Space Station evolution

Viewgraphs on space teleoperations technology for space station evolution are presented. Topics covered include: shuttle remote manipulator system; mobile servicing center functions; mobile servicing center technology; flight telerobotic servicer-telerobot; flight telerobotic servicer technology; technologies required for space station assembly; teleoperation applications; and technology needs for space station evolution.

Reuter, Gerald J.↗
NASA NTRS1990

Active damping in a flexible manipulator

Viewgraphs on active damping in a flexible manipulator are presented. Topics covered include: Shuttle Remote Manipulator System (SRMS); flexible structures; vibration; modeling of a flexible manipulator dynamical structure; designing control law criterion that minimizes vibration; and candidate application of fuzzy logic control law to the problem.

Pham, Trung T.↗
NASA NTRS1993

Potential low-cost telerobotics flight experiments

Few telerobotic devices have flown in space (the remote manipulator system (RMS) on the Space Shuttle is the principal one that has flown), and proposed telerobotic systems have ballooned in cost to the point where the U.S. no longer has any funded flight telerobotic programs. Three possible alternative systems with limited scope, but with significant research and even operational promise are described. These include systems or research in effective control of (possibly flexible) arms in microgravity, despite long communication latency, and for inspection of elements of spacecraft such as Space Station Freedom.

Wilcox, Brian↗
NASA NTRS1992

Application of a passivity based control methodology for flexible joint robots to a simplified Space Shuttle RMS

A passivity approach for the control design of flexible joint robots is applied to the rate control of a three-link arm modeled after the shoulder yaw joint of the Space Shuttle Remote Manipulator System (RMS). The system model includes friction and elastic joint couplings modeled as nonlinear springs. The basic structure of the proposed controller is the sum of a model-based feedforward and a model-independent feedback. A regulator approach with link state feedback is employed to define the desired motor state. Passivity theory is used to design a motor state-based controller to stabilize the error system formed by the feedforward. Simulation results show that greatly improved performance was obtained by using the proposed controller over the existing RMS controller.

Sicard, Pierre↗
NASA NTRS1992

Hot rocket plume experiment - Survey and conceptual design

Attention is given to a space-borne engine plume experiment study to fly an experiment which will both verify and quantify the reduced contamination from advanced rhenium-iridium earth-storable bipropellant rockets (hot rockets) and provide a correlation between high-fidelity, in-space measurements and theoretical plume and surface contamination models. The experiment conceptual design is based on survey results from plume and contamination technologists throughout the U.S. With respect to shuttle use, cursory investigations validate Hitchhiker availability and adaptability, adequate remote manipulator system (RMS) articulation and dynamic capability, acceptable RMS attachment capability, adequate power and telemetry capability, and adequate flight altitude and attitude/orbital capability.

Millard, Jerry M.↗
NASA NTRS1993

Assumed modes method and flexible multibody dynamics

The use of assumed modes in flexible multibody dynamics algorithms requires the evaluation of several domain dependent integrals that are affected by the type of modes used. The implications of these integrals - often called zeroth, first and second order terms - are investigated in this paper, for arbitrarily shaped bodies. Guidelines are developed for the use of appropriate boundary conditions while generating the component modal models. The issue of whether and which higher order terms must be retained is also addressed. Analytical results, and numerical results using the Shuttle Remote Manipulator System as the multibody system, are presented to qualitatively and quantitatively address these issues.

Tadikonda, S. S. K.↗
NASA NTRS1993

Momentum management in redundant manipulators for vibration suppression

This research project dealt with the development of control methodologies which would effectively use existing inertial devices as control actuators in the manipulation of Remote Manipulator System (RMS)-type robotic arms. The existing devices proposed to be investigated are the Torque-Wheel (TW) and the Proof-Mass actuator (PM). This report presents a succinct summary of our results.

Barbieri, Enrique↗
NASA NTRS1990

[STS-31 Onboard 16mm Photography Quick Release]

This video features scenes shot by the crew of onboard activities including Hubble Space Telescope deploy, remote manipulator system (RMS) checkout, flight deck and middeck experiments, and Earth and payload bay views.

Source record↗