Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reacting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Effect of Mass Transfer on Aeroheating in Hypersonic Chemically Reacting Boundary Layers

Heat flux characterization of high-enthalpy boundary layer flows is key to optimize the performance and design of Thermal Protection System of next generation aerospace vehicles [1]. At atmospheric entry hypersonic speeds, ablation as well as surface catalycity impact boundary layer aeroheating. Out-gassing occurring from an ablative surface in planetary entry environment introduces a rich set of problems in thermodynamic, fluid dynamic, and material pyrolysis. Ablation leads to out-gassing and surface roughness, both of which are known to affect surface heating in hypersonic chemically reacting boundary layers via three main routes: gas blowing into the boundary layer from the wall, changing the surface heat transfer due to wall-flow chemical reactions, and modifying surface roughness via ablative processes.

Karimi, Mona↗

Numerical Investigation of Film Coefficient Approximation for Chemically Reacting Boundary-Layer Flows

Aerothermal analysis of spacecraft planetary entry is heavily dependent on heritage engineering models. The film coefficient heat transfer model examined in this paper estimates the convective heating to the vehicle for a laminar, dissociated, chemically reacting boundary layer for an Earth atmosphere. This model requires information about the vehicle and flowfield for a given trajectory point and estimates a proportional relationship between enthalpy potential and convective heat flux. In practice it is the aerothermal engineer who must decide which assumptions are appropriate for his/her application. This work looks at numerous CFD simulations for an arbitrary, axisymmetric flight vehicle to analyze the relative importance of both the mass and energy constraints imposed at the wall boundary, as well as the effect of various diffusion models. Within the subset of tested energy boundary conditions, it is found that the most desirable energy boundary condition is the radiative equilibrium boundary condition, which permits conservative estimates of convective heat flux, but also generates flowfield-dependent spatial thermal distributions along the surface. Other key findings are presented in an effort to make the film coefficient engineering model readily available to design engineers across industry.

Film coefficient↗

Simulations of the Modular Axisymmetric Scramjet Test Rig Under Reacting Flow Conditions

Simulations of the Air Force Research Laboratory (AFRL) Modular Axisymmetric Scramjet Test Rig (MASTeR) are presented. MASTeR is a parametric test article capable of investigating various scramjet cavity flameholder designs and fueling strategies with the goal to characterize and optimize flameholding capability. In the current work, three cavity aspect ratios, and two fueling strategies (upstream and in-cavity) with ethylene at a nominal facility pressure and temperature condition are evaluated. The reacting simulations are performed, and the resulting flow characteristics are discussed. For each configuration and fueling strategy, cavity residence time, entrainment rate, and fuel-air equivalence ratio are computed. The MASTeR geometry is defined in Engineering Sketch Pad (ESP) and the simulations use a sketch-to-solution (S2S) automated unstructured grid adaptation tool in VULCAN-CFD. This tool automatically generates a simulation grid from the ESP geometry and systematically adapts it to the numerical solution based on the Hessian error estimate of a specified flow field parameter. Reynolds averaged simulations (RAS) are used with a two-equation linear eddy viscosity and diffusivity model. The resulting database can be compared with the experimental data as those become available, and explored to develop models for cavity performance for scramjet propulsion design applications.

hypersonics↗

Simulations of the Modular Axisymmetric Scramjet Test Rig Under Reacting Flow Conditions

Simulations of the Air Force Research Laboratory (AFRL) Modular Axisymmetric Scramjet Test Rig (MASTeR) are presented. MASTeR is a parametric test article capable of investigating various scramjet cavity flameholder designs and fueling strategies with the goal to characterize and optimize flameholding capability. In the current work, three cavity aspect ratios, three depths, and two fueling strategies (upstream and in-cavity) with ethylene at a nominal facility pressure and temperature conditions are evaluated. The simulations are performed for mixing-only and reacting flows, and the resulting flow characteristics are compared. For each configuration and fueling strategy, cavity residence time, entrainment rate, and fuel-air equivalence ratio are computed. The MASTeR geometry is defined in the Engineering Sketch Pad (ESP) and the simulations use a sketch-to-solution (S2S) automated unstructured grid adaptation tool in VULCAN-CFD. This tool automatically generates a simulation grid from the ESP geometry and systematically adapts it to the numerical solution based on the Hessian error estimate of a specified flow field parameter. Reynolds averaged simulations (RAS) are used with typical two-equation linear eddy viscosity and diffusivity model. The resulting database can be compared with the experimental data as those becomes available and explored to develop models for cavity performance for scramjet propulsion design applications.

hypersonics↗

A Moving Discontinuous Galerkin Method with Interface Condition Enforcement for Reacting Hypersonic Flows

The necessity of enforcing conservation in computational elements or cells (element conservation) for discontinuous solutions is well understood and respected for solving conservation laws in computational fluid dynamics (CFD). In contrast, interface conservation, where the conservation across cell interfaces is enforced, is long ignored, and yet is also ruled and required by the underlying physics just like element conservation. Violation of the interface conservation across discontinuities is the root cause why an exact discontinuous solution can never be achieved in shock capturing methods. The interface conservation is examined and explored in this talk. Moving discontinuous Galerkin (MDG) finite element method with interface conservation enforcement (MDG-ICE) [1],[2] are then presented for solving compressible flow problems with discontinuities based on the observation that the interface conservation can only be satisfied, only when mesh interfaces are aligned with discontinuities. In the MDG-ICE formulation, both conservative quantities and grid geometry are considered as independent variables. A space-time DG formulation is used to solve the multi-material compressible Euler equations in the standard discontinuous solution space and the discrete grid geometry is solved using a variational formulation in a continuous space. A self-adaptive Levenberg-Marquardt method is utilized to solve the resulting over-determined system of nonlinear equations arising from the MDG-ICE formulation. A number of numerical experiments for a variety of flow problems are conducted to assess the accuracy and performance of the MDG-ICE method. Numerical results obtained indicate that the MDG-ICE method is able to deliver the designed order of both h- and p-convergence even for discontinuous solutions, and detect all types of interfaces, via interface condition enforcement and satisfy, via grid movement, the compressible Euler equations and the associated interface condition.

Discontinuous Galekin↗

One-dimensional reacting gas nonequilibrium performance program

Computer program calculates the inviscid one-dimensional equilibrium, frozen, and nonequilibrium nozzle expansion of gaseous propellant exhaust mixtures containing the elements - carbon, hydrogen, oxygen, nitrogen, fluorine and chlorine. The program performs calculations for conical nozzles only.

Frey, H. M.↗

One-dimensional two-phase reacting gas nonequilibrium performance program

Computer program calculates the inviscid one-dimensional equilibrium, frozen, and nonequilibrium nozzle expansion of propellant exhaust mixtures containing carbon, hydrogen, oxygen, nitrogen, fluorine, chlorine and either aluminum, beryllium, boron or lithium. This program performs calculations for conical nozzles only.

Cherry, S. S.↗

Axisymmetric reacting gas nonequilibrium performance program

Computer program calculates the inviscid one-dimensional equilibrium, frozen, and nonequilibrium nozzle expansion of propellant exhaust mixtures containing these six elements - carbon, hydrogen, oxygen, nitrogen, fluorine, and chlorine plus either aluminum, beryllium, boron or lithium. This program will perform calculations for contoured and conical nozzles.

Kliegel, J. R.↗