The scattering of polarized light by polydisperse systems of irregular particles
Polarized light scattering angle relationship with Mueller matrix elements for polydisperse systems of irregular randomly oriented particles
Gagne, G.↗
SEARCH · Engineering Papers
Results for “Random Systems”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Direct calculation of first- and second-order density matrices - The higher RPA method
First and second order density matrices calculation of pure state N fermion systems, using higher random phase approximation
Simons, J.↗
The particle background observed by the X-ray detectors onboard Copernicus
The design and characteristics of low energy detectors on the Copernicus satellite are described. The functions of the sensors in obtaining data on the particle background. The procedure for processing the data obtained by the satellite is examined. The most significant positive deviations are caused by known weak X-ray sources in the field of view. In addition to small systemic effects, occasional random effects where the count rate increases suddenly and decreases within a few frames are analyzed.
Davison, P. J. N.↗
Modification to area navigation equipment for instrument two-segment approaches
A two-segment aircraft landing approach concept utilizing an area random navigation (RNAV) system to execute the two-segment approach and eliminate the requirements for co-located distance measuring equipment (DME) was investigated. This concept permits non-precision approaches to be made to runways not equipped with ILS systems, down to appropriate minima. A hardware and software retrofit kit for the concept was designed, built, and tested on a DC-8-61 aircraft for flight evaluation. A two-segment approach profile and piloting procedure for that aircraft that will provide adequate safety margin under adverse weather, in the presence of system failures, and with the occurrence of an abused approach, was also developed. The two-segment approach procedure and equipment was demonstrated to line pilots under conditions which are representative of those encountered in air carrier service.
Source record↗
Arctic odyssey - Five years of data buoys in AIDJEX
The Arctic Ice Dynamics Joint Experiment of 1975-1976 used data bouys in conjunction with tracking satellites to study the interaction of Arctic Sea ice with the environment, and, more specifically, to define the motion of ice on the perimeter of the area of interest and to measure surface barometeric pressure over the same area. Charts are presented, indicating the position of the buoy array along with a table detailing buoy characteristics. The position fix accuracy of RAMS (Random Access Measurement System) buoys is discussed together with position errors due to the along-track motion of the observing satellites. Polar satellite data collection and tracking efficiency is assessed together with satellite system flexibility concepts.
Martin, P.↗
Photorefractive materials for optical storage and display
Real-time data storage and processing using optical techniques have been considered in recent years. Of particular interest are photosensitive electro-optic crystals which permit volume storage in the form of phase holograms, by means of a charge transfer process. A survey of the state of the art of such holographic memories is presented. The physical mechanism responsible for the formation of phase holograms in such crystals is discussed. Attention is focused on various aspects of materials characterization, development and utilization. Experimental reversible holographic read-write memory systems with fast random access and high storage capacity employing this new class of photosensitive materials have already been demonstrated.
Shah, R. R.↗
Satellite Doppler data processing using a microcomputer
A microcomputer which was developed to compute ground radio beacon position locations using satellite measurements of Doppler frequency shift is described. Both the computational algorithms and the microcomputer hardware incorporating these algorithms were discussed. Results are presented where the microcomputer in conjunction with the NIMBUS-6 random access measurement system provides real time calculation of beacon latitude and longitude.
Schmid, P. E.↗
Invariants of optimal minimal-order observer-based compensators
The relations characterizing the optimal minimal-order observer-based compensators for a linear time-invariant multivariable system with a random initial state (or, equivalently, known initial state and white plant-driving noise) have been reported by Miller (1973). In this note we establish in general that the plant transfer function uniquely determines the optimal compensator transfer function, and that this characterizes precisely the degrees of freedom in the compensator design; computational implications of this result are indicated.
Blanvillain, P. J.↗
Real-time video-image analysis
Digitizer and storage system allow rapid random access to video data by computer. RAPID (random-access picture digitizer) uses two commercially-available, charge-injection, solid-state TV cameras as sensors. It can continuously update its memory with each frame of video signal, or it can hold given frame in memory. In either mode, it generates composite video output signal representing digitized image in memory.
Eskenazi, R.↗
Cosmic turbulence and the angular momenta of astronomical systems
It is suggested that gravitationally bound astronomical systems ranging from asteroids to galaxy superclusters may derive their rotation from a hierarchy of cosmic turbulence, thus explaining the empirical specific angular momentum-mass relationship (j approximately equal to M to the 3/4 power) exhibited by these systems. It is shown that many of the properties of these systems, e.g., the random orientation of their spin vectors, can be accounted for if astronomical objects form in a turbulent environment.
Fleck, R. C., Jr.↗
Probabilistic modeling for simulation of aerodynamic uncertainties in propulsion systems
The numerical simulation of the probabilistic aerothermodynamic response of propulsion system components to randomness in their environment was explored. The reusable rocket engine turbopumps were selected as an example because of the severe cryogenic environment in which they operate. The thermal and combustion instabilities, coupled with the engine thrust requirements from start up to shut down, lead to randomness in the flow variables and uncertainties in the aerodynamic loading. The probabilistic modeling of the turbopumps aerodynamic response was accomplished using the panel method coupled with fast probability integration methods. The aerodynamic response in the form of probabilistic rotor blades and splitter loading were predicted and the results presented for specified flow coefficient and rotor preswirl variance. Possible future applications of the aerothermodynamic probabilistic modeling in engine transient simulation, condition monitoring and engine life prediction are briefly discussed.
Hamed, Awatef↗
Non-Gaussian microwave background fluctuations from nonlinear gravitational effects
Whether the statistics of primordial fluctuations for structure formation are Gaussian or otherwise may be determined if the Cosmic Background Explorer (COBE) Satellite makes a detection of the cosmic microwave-background temperature anisotropy delta T(sub CMB)/T(sub CMB). Non-Gaussian fluctuations may be generated in the chaotic inflationary model if two scalar fields interact nonlinearly with gravity. Theoretical contour maps are calculated for the resulting Sachs-Wolfe temperature fluctuations at large angular scales (greater than 3 degrees). In the long-wavelength approximation, one can confidently determine the nonlinear evolution of quantum noise with gravity during the inflationary epoch because: (1) different spatial points are no longer in causal contact; and (2) quantum gravity corrections are typically small-- it is sufficient to model the system using classical random fields. If the potential for two scalar fields V(phi sub 1, phi sub 2) possesses a sharp feature, then non-Gaussian fluctuations may arise. An explicit model is given where cold spots in delta T(sub CMB)/T(sub CMB) maps are suppressed as compared to the Gaussian case. The fluctuations are essentially scale-invariant.
Salopek, D. S.↗
Probabilistic modeling for simulation of aerodynamic uncertainties in propulsion systems
The numerical simulation of the probabilistic aerothermodynamic response of propulsion system components to randomness in their environment was explored. The reusable rocket engine turbopumps were selected as an example because of the severe cryogenic environment in which they operate. The thermal and combustion instabilities, coupled with the engine thrust requirements from start up to shut down, lead to randomness in the flow variables and uncertainties in the aerosynamic loading. The probabilistic modeling of the turbopumps' aerodynamic response was accomplished using the panel method coupled with fast probability integration methods. The aerodynamic response in the form of probabilistic rotor blades and splitter loading were predicted and the results presented for specified flow coefficient and rotor preswirl variance. Possible future applications of the aerothermodynamic probabilistic modeling in engine transient simulation, condition monitoring, and engine life prediction are briefly discussed.
Hamed, A.↗
A steady-state Kalman filter for assimilating data from a single polar orbiting satellite
A steady-state scheme for data assimilation in the context of a single, short period (relative to a day), sun-synchronous, polar-orbiting satellite is examined. If the satellite takes observations continuously, the gains, which are the weights for blending observations and predictions together, are steady in time. For a linear system forced by random noise, the optimal steady-state gains (Wiener gains) are equivalent to those of a Kalman filter. Computing the Kalman gains increases the computational cost of the model by a large factor, but computing the Wiener gains does not. The latter are computed by iteration using prior estimates of the gains to assimilate simulated observations of one run of the model, termed 'truth' into another run termed 'prediction'. At each stage, the prediction errors form the basis for the next estimate of the gains. Steady state is achieved after three or four iterations. Further simplification is achieved by making the gains depend on longitudinal distance from the observation point, not on absolute longitude. For a single-layer primitive equation model, the scheme works well even if only the mass field is observed but not the velocity field. Although the scheme was developed for Mars Observer, it should be applicable to data retrieved from Earth atmosphere satellites, for example, UARS.
Banfield, Don↗
Analysis of Summer Thunderstorms in Central Alabama Using the NASA Land Information System
Forecasters have difficulty predicting "random" afternoon thunderstorms during the summer months. Differences in soil characteristics could be a contributing factor for storms. The NASA Land Information System (LIS) may assist forecasters in predicting summer convection by identifying boundaries in land characteristics. This project identified case dates during the summer of 2009 by analyzing synoptic weather maps, radar, and satellite data to look for weak atmospheric forcing and disorganized convective development. Boundaries in land characteristics that may have lead to convective initiation in central Alabama were then identified using LIS.
James, Robert↗
On the convergence of Lion's identification method with random inputs
Identification scheme for scalar input and scalar output linear systems for wide class of random inputs
Kushner, H. J.↗
Optical technique for measurement of random water wave surfaces
An optical system using the refraction of a vertical light ray has been developed for measuring the slope of random wind-generated water waves. The basic elements of the system are photovoltaic cells which are connected to individual amplifiers so that when the refracted light beam is incident on a cell, the output of the cell is amplified and then supplied as input to a comparator. The comparator then provides a specified voltage output, independent of the incident light intensity, as long as it is above a designated background value. The comparators are designed to give output voltages comparable with standard TTL. This arrangement provides a high signal from the cell when it experiences incident light, and a low signal when there is only background light, with the high and low signals at TTL voltage levels.
Sorrell, F. Y.↗
Energy and mechanical properties predictions in Fe-Ni binary system by ab initio calculations
Here, the fcc random solid solutions in Fe-Ni binary system were investigated using ab initio calculations. Density functional theory (DFT) was applied along with supercells generated by the Special Quasi-Random Structure (SQS) method to predict the enthalpy of mixing and magnetic and elastic properties. The results were compared with relevant experimental and computational data produced by other groups. The effect of SQS supercell size and relaxation procedure on the predicted properties of the alloys were also studied. Our calculations show that 16-atoms SQS model provides adequate approach to the mixing energy of the alloy. However, calculation of mechanical properties requires larger supercell. Excellent agreement between experimental and calculated elastic properties was found in fcc region of Fe-Ni system.
36 MATERIALS SCIENCE↗