Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radiation use efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Precise Measurement of the Neutron Magnetic Form Factor Using Super-BigBite Spectrometer at Jefferson Lab

The GMn experiment (E12-09-019) was conducted at Jefferson Laboratory from late 2021 into early 2022. The goal was to make high-precision measurement of the neutron’s magnetic form factor (GMn) at multiple kinematic points, including Q2 = 3.5, 4.5, 6.5, 8.5, 10, 12, 13.5, 16, and 18 (GeV/c)2. Limited data exist for GMn in the region up to about Q2 = 10 (GeV/c)2, with existing data having large systematic uncertainty. In this experiment, the ratio method was employed to reduce systematic uncertainty by measuring the ratio of neutron and proton yields. The experiment took place at Jefferson Laboratory in Hall A, where the BigBite spectrometer was used to detect the scattered electrons, while the HCal in the SuperBigbite spectrometer was used to detect both neutrons and protons. The protons were deflected slightly upwards with the use of a large-aperture dipole magnet named BigBen, allowing for enhanced particle identification. Extraction of GMn requires taking the ratio of proton and neutron yields. Analysis efforts are still currently underway to refine corrections to the data, including detector efficiencies, radiative corrections, neutron and proton mass identification, and charge exchange.

Lashley-Colthirst, Nathaniel↗
DOE OSTI2024

Models implemented in the methodological approach to design the initial STEP first wall contour

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is managing the loads on the first wall within acceptable limits. Therefore, the conceptual design development of the STEP Prototype Power plant needs to be based on load estimates derived using legitimate plasma physics assumptions through dynamic and flexible tools. The current design foresees the STEP main chamber first wall to withstand steady-state heat loads of up to ~1 MW/m 2 , excluding critical regions expected to receive higher heat loads such as the baffle regions approaching the divertors. These critical areas will require ad hoc assessments and will be designed with the presence of limiters. This article focuses on the models and methodology adopted for designing the 2-D poloidal contour of the STEP first wall, based on the anticipated charged particle and radiation heat loads during normal operation. Firstly, the models adopted for calculating the charged particle and radiation heat loads are introduced. The first model is validated through benchmarking against the particle tracing code SMARDDA, while the second model is verified by comparing it with data from the MAST-U experiment. Secondly, the model used to design the 2-D first wall contour according to the heat loads is explained. We acknowledge that this preliminary design stage assumes certain simplifications, notably an axisymmetric geometry, for computational efficiency and clarity in presentation. It is understood that subsequent design phases will address the complexities of real-world engineering, including non-axisymmetric effects, transient plasma scenarios, and the impact of disruptions on the first wall design. Finally, an automatic procedure based on these models is presented for defining the 2-D poloidal contour of the STEP first wall to minimize heat loads, taking into account the need to radiate most of the alpha-particle and auxiliary heating power. Here, by providing an overview of the models, methodology, and an automatic procedure, this paper contributes to the design process of the STEP first wall, addressing the engineering challenges associated with fusion power plant development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Scintillation light detection in polycrystalline diamond using single photon detectors

Here, this study investigates the scintillation properties of polycrystalline diamond for particle detection applications, particularly in neutron and alpha radiation environments. Polycrystalline diamonds provide a cost-effective alternative to monocrystalline diamonds while retaining essential detection properties. Photoluminescence measurements were performed to analyze emission spectra, revealing distinct characteristics based on impurity content and crystallinity. Scintillation responses were assessed using Silicon Photomultipliers (SiPMs), demonstrating the capability of polycrystalline diamond powders to respond to alpha irradiation, albeit with reduced resolution compared to traditional scintillators. A prototype neutron detector was developed by combining diamond powder with neutron-sensitive 6 LiF, and its performance was evaluated through experimental testing and Geant4 simulations. The findings indicate that polycrystalline diamond-based detectors can achieve significant detection efficiency while remaining insensitive to gamma radiation, offering potential for portable neutron detection applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

FeGenie: a comprehensive tool for the identification of iron genes and iron gene neighborhoods in genomes and metagenome assemblies

Iron is a micronutrient for nearly all life on Earth. It can be used as an electron donor and electron acceptor by iron-oxidizing and iron-reducing microorganisms and is used in a variety of biological processes, including photosynthesis and respiration. While it is the fourth most abundant metal in the Earth’s crust, iron is often limiting for growth in oxic environments because it is readily oxidized and precipitated. Much of our understanding of how microorganisms compete for and utilize iron is based on laboratory experiments. However, the advent of next-generation sequencing and surge in publicly available sequence data has made it possible to probe the structure and function of microbial communities in the environment. To bridge the gap between our understanding of iron acquisition, iron redox cycling, iron storage, and magnetosome formation in model microorganisms and the plethora of sequence data available from environmental studies, we have created a comprehensive database of hidden Markov models (HMMs) based on genes related to iron acquisition, storage, and reduction/oxidation in Bacteria and Archaea. Along with this database, we present FeGenie, a bioinformatics tool that accepts genome and metagenome assemblies as input and uses our comprehensive HMM database to annotate provided datasets with respect to iron-related genes and gene neighborhood. An important contribution of this tool is the efficient identification of genes involved in iron oxidation and dissimilatory iron reduction, which have been largely overlooked by standard annotation pipelines. We validated FeGenie against a selected set of 28 isolate genomes and showcase its utility in exploring iron genes present in 27 metagenomes, 4 isolate genomes from human oral biofilms, and 17 genomes from candidate organisms, including members of the candidate phyla radiation. We show that FeGenie accurately identifies iron genes in isolates. Furthermore, analysis of metagenomes using FeGenie demonstrates that the iron gene repertoire and abundance of each environment is correlated with iron richness. While this tool will not replace the reliability of culture-dependent analyses of microbial physiology, it provides reliable predictions derived from the most up-to-date genetic markers. FeGenie’s database will be maintained and continually updated as new genes are discovered.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Deep Neural Network Informed Markov Chain Monte Carlo Methods

In subsurface flow modeling, quantifying the uncertainty of model parameters and the corresponding uncertainly on output quantities is a crucial task for groundwater management. Markov chain Monte Carlo (MCMC) methods can take advantage of observed data to estimate parameters in a Bayesian setting. However, MCMC can be slow to converge and produce highly correlated samples when the dimensions of the parameters is high. Using gradients for the posterior distribution can help samplers explore the parameter space more efficiently, but obtaining gradients can be computationally challenging.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Optimization Algorithm for Criticality Experiment Design Using Whisper

Many criticality experiments performed to aid in nuclear data evaluation are designed to maximize the sensitivity of the system’s effective neutron multiplication factor to a certain nuclide reaction pair over an energy region of interest. This is typically done by evaluating possible designs in a transport code such as MCNP and selecting the one with the highest desired sensitivity. A designer has many tools to try to maximize this sensitivity such as different moderators, reflectors, fuels, and geometries. This balancing act of identifying a critical and maximally sensitive system become very computationally expensive as more variables are added and higher precisions are desired. In order to identify these optimal configurations more efficiently a Particle Swarm Optimization (PSO) algorithm coupled with MCNP has been developed by Los Alamos National Laboratory (LANL). This algorithm has been used to design two upcoming criticality experiments that will be performed at the National Criticality Experiments Research Center (NCERC), located at the Nevada National Security Site, and operated by LANL, the only general-purpose critical experiments laboratory in the United States. PSO uses a population (swarm) of candidate solutions (particles) on a search space of dimensions such as moderator and reflector thicknesses or enrichments and concentrations. These particles move around the search space from generation to generation according to simple rules. Eventually, the swarm converges on the configuration that is both critical and maximally sensitive to a piece of nuclear data. PSO is well suited for criticality experiments as the algorithm is agnostic to the underlying physics, meaning it is effective on many different experimental setups. This algorithm has been modified to maximize the nuclear data similarity coefficient between an application case and an experiment aimed at replicating the application case using WHISPER, a nuclear criticality safety analysis tool. This allows for the efficient design of critical experiments informed by nuclear data sensitives.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Plasma-based particle sources

High-brightness particle beams generated by advanced accelerator concepts have the potential to become an essential part of future accelerator technology. In particular, high-gradient accelerators can generate and rapidly accelerate particle beams to relativistic energies. The rapid acceleration and strong confining fields can minimize irreversible detrimental effects to the beam brightness that occur at low beam energies, such as emittance growth or pulse elongation caused by space charge forces. Due to the high accelerating gradients, these novel accelerators are also significantly more compact than conventional technology. Advanced accelerators can be extremely variable and are capable of generating particle beams with vastly different properties using the same driver and setup with only modest changes to the interaction parameters. So far, efforts have mainly been focused on the generation of electron beams, but there are concepts to extend the sources to generate spin-polarized electron beams or positron beams. The beam parameters of these particle sources are largely determined by the injection and subsequent acceleration processes. Although, over the last decade there has been significant progress, the sources are still lacking a sufficiently high 6-dimensional (D) phase-space density that includes small transverse emittance, small energy spread and high charge, and operation at high repetition rate. This is required for future particle colliders with a sufficiently high luminosity or for more near-term applications, such as enabling the operation of free-electron lasers (FELs) in the X-ray regime. Major research and development efforts are required to address these limitations in order to realize these approaches for a front-end injector for a future collider or next-generation light sources. In particular, this includes methods to control and manipulate the phase-space and spin degrees-of-freedom of ultrashort plasma-based electron bunches with high accuracy, and methods that increase efficiency and repetition rate. These efforts also include the development of high-resolution diagnostics, such as full 6D phase-space measurements, beam polarimetry and high-fidelity simulation tools. A further increase in beam luminosity can be achieve through emittance damping. Emittance cooling via the emission of synchrotron radiation using current technology requires kilometer-scale damping rings. For future colliders, the damping rings might be replaced by a substantially more compact plasma-based approach. Here, plasma wigglers with significantly stronger magnetic fields are used instead of permanent-magnet based wigglers to achieve similar damping performance but over a two orders of magnitude reduced length.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Radiative cooling and thermoregulation in the earth’s glow

Efficient passive radiative cooling of buildings requires an unimpeded view of the sky. However, vertical facades of buildings mostly see terrestrial features that become broadband-radiative heat sources in the summer and heat sinks in the winter. The resulting summertime terrestrial heat gain by buildings negates or overwhelms their narrowband longwave infrared (LWIR) radiative cooling to space, while the wintertime terrestrial heat loss causes overcooling. We show that selective LWIR emitters on vertical building facades can exploit the differential transmittance of the atmosphere toward the sky and between terrestrial objects to achieve higher summertime cooling and wintertime heating than conventionally used broadband emitters. The impact of this novel and passive thermoregulation is comparable to that of painting dark roofs white and is achievable with both novel and commonplace materials. Our findings represent new and remarkable opportunities for materials design and untapped thermoregulation of entities ranging from buildings to human bodies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Spectral emission properties of a nitrogen-doped diamond (001) photocathode: Hot electron transport and transverse momentum filtering

The electron emission properties of a single-crystal nitrogen-doped diamond(001) photocathode inserted in a 10 kV DC photoelectron gun are determined using a tunable (235–410 nm) ultraviolet laser radiation source for photoemission from both the back nitrogen-doped substrate face and the front homoepitaxially grown and undoped diamond crystal face. Here, the measured spectral trends of the mean transverse energy and quantum efficiency of the emitted electrons are both anomalous and nonmonotonic, but are shown to be consistent with (i) the known physics of electron photoexcitation from the nitrogen substitution states into the conduction bands of diamond, (ii) the energy position and dispersion characteristics of the conduction bands of diamond in the (001) emission direction, (iii) the effective electron affinity of the crystal faces, (iv) the strong electron-(optical)phonon coupling in diamond, and (v) the associated hot electron transport dynamics under energy equipartition with the optical phonons. Notably, the observed hot electron emission is shown to be restricted parallel to the photocathode surface by the low transverse effective masses of the emitting band states—a transverse momentum filtering effect.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Cryogenic System Preliminary Design for a 0.5m-Long, Conduction-Cooled Nb3Sn Undulator Magnet Prototype

There are several NbTi superconducting undulator (SCU) magnets currently in operation at the Advanced Photon Source (APS) at Argonne National Laboratory (ANL). The development on Nb3Sn-based superconducting undulator magnets at APS is underway due to the potential to further enhance the performance of the SCUs. Superconducting undulator magnets need to keep temperature gradients minimized in order to retain thermal and operating current margin. We have designed the thermal links for efficient heat conduction using 3D finite element analysis (FEA) simulation in COMSOL Multiphysics software, which was later used for the calculation of the temperature distribution across a 0.5 m long, conduction-cooled, Nb3Sn undulator magnet prototype that includes both conductive heat transfer and radiative heating components. We have modelled the evolution of the thermal properties of the magnet winding as well as other cold parts during cool-down from ambient temperature with the operation of a SHI RDK-415D cryocooler to examine the estimated time that is needed for the cooldown as well as the baseline temperature we could achieve. A key result was that a maximum coil delta T = 0.11 K along the designed thermal links and a temperature range of 3.42 K-3.53 K for the winding were predicted at steady state. A pair of G10 support rods for carrying the magnet as well as a pair of current leads made of metals were also designed and optimized for the testing system, targeting for an operation temperature of 4 K and a coil current of 950 A DC.

Zhang, Danlu↗
DOE OSTI2024

Cloud Processing of Aerosol during SAIL Field Campaign Report

Globally, on average, the release rate of aerosols from clouds is estimated to be about 6,000 Tg/yr and an aerosol particle is estimated to experience about three cloud cycles. Cloud processing of aerosol produces aerosols that have dramatically different physicochemical properties compared to their original form. Cloud processing may transform particles to efficient cloud condensation nuclei (CCN) or ice nucleating particles (INP) that can further participate in cloud formation. We investigated cloud processing of aerosol during the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) Surface Atmosphere Integrated Field Laboratory (SAIL) field campaign using multi-modal offline analysis techniques available at DOE’s Environmental Molecular Sciences Laboratory (EMSL). The main scientific aim of this project was to understand the processes that transform aerosols (chemically, and physically), and influence aerosol-cloud interactions. Aerosol particles undergo significant modifications due to warm (cloud droplets) and cold cloud (ice crystals) processing. Cloud processing of aerosol has important effects on the atmospheric aerosol number and mass concentration, size distribution, phase separation, and chemical composition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Modernizing Accelerator Responsiveness and Controls in Operations

Accelerators increasingly use artificial intelligence (AI) and machine learning (ML) software and workflows for a variety of tasks, from optimization to fault detection and recovery. Efficient and sustainable application of these technologies necessitates specialized and facility-specific infrastructure commitments. Accelerator facilities also introduce unique radiation and security hazards, placing additional demands on operational infrastructure. These needs further escalate the prioritization of effective collaboration models and associated funding mechanisms and legal frameworks.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

CdSexTe1-x /CdTe Devices With Reduced Interface Recombination Through Novel Back Contacts and Doping Strategies

In order to study rear interface recombination in CdSexTe1-x/CdTe solar cells, several back contact structures were fabricated using combinations of tellurium, alumina, amorphous silicon, and indium tin oxide. Film side Time-Resolved Photoluminescence measurements were taken to measure carrier lifetimes and interface recombination at the back interface. We show increasingly improved interface passivation through the subsequent use of alumina, amorphous silicon, and ITO. Additionally, we provide evidence that an arsenic-doped absorber forms a better interface with numerous back contact structures. Reductions in the back interface recombination velocity are shown to correlate with improvements in device external radiative efficiency.

13 HYDRO ENERGY↗
DOE OSTI2024

An Adaptive Dynamic Agrivoltaic Production Tool

In the pursuit of sustainable and land-use-efficient solutions to mitigate climate change, the concept of agrivoltaic systems, which integrate renewable solar energy into conventional agriculture, has emerged. By deploying solar arrays above the crop field, these systems are designed to maximize the land use efficiency or, in other words, the value of generated electricity and crop yield per unit area. While power generation has been extensively studied and modeled, research gaps persist in simulating crop performance [1], [2]. Early studies utilized generalized relationships between photosynthetically active radiation (PAR) and crop production. However, significant variations in crop performance due to other factors, such as weather and soil, can compromise the reliability of the results [2]. Current studies focus on comprehensive process-based crop models, such as DSSAT [3] and STICS [4]. Nevertheless, the validation status varies greatly across different species, and the validation process requires well-designed experiments to adjust specific processes. For less common shade-tolerant crops with limited validation, such as cabbage, physiological behaviors can be difficult to predict [5]. This study investigates an adaptive dynamic agrivoltaic production tool (ADAPT) with few data requirements and minimal on-site calibration that can be easily applied in real applications.

Long, Qirui↗
DOE OSTI2023

The Future Electron-Ion Collider

Generalized Parton Distributions include rich information and became a powerful tool for studying hadron structure. Deeply Virtual Compton Scattering is the golden channel to access GPDs. The development of high luminosity and high-acceptance detectors (Electron-Ion Collider) allows physicists to overcome the difficulty of DVCS measurements. The outstanding performance of the accelerator performs the eA collisions at the center of mass energy from 20 to 140 GeV, while the luminosity at the scale of 1034 cm?2s?1. The new type of high-density crystal, PWO-II, produced by CRYTUR in 2×2×20 cm3 will be utilized in the calorimeter. The transparency of PWO-II crystals is > 70% at 620 nm, > 60% at 420 nm, and >35% at 360 nm. The crystals also show good radiation hardness under 30 Gy radiation exposure. Ten PWO-II crystals have a uniform light yield at 30 p.e./MeV, providing sufficient light yield to reduce the fluctuation of the energy measurements. Near 3000 crystals were constructed inside the 12-sided polygon supporting structure in the simulation. The island clustering algorithm was used for reconstructed the energy. The energy resolution study by the particle gun shows the stochastic term and constant term are 1.8% and 1.2%, respectively. The spatial resolution of NEEMC varies from 5% to 15% of the crystal?s width depending on the particle?s incident angle. The pion rejection of NEEMC can reach 103 with electron efficiency > 85% when the particle?s energy is larger than 1GeV. The Pi0- identified efficiency study can be interpreted as finding the local maxima in the single cluster caused by two high energy close photons. The study results show that efficiency is nearly 100% for pi0 energy is smaller than 10 GeV, and efficiency drops to 30% with 20 GeV pi0. The new type of 3x3 pixelated AC-LGAD were wire bonded to ALTIROC for performance test. The cross-talk between the adjacent channels is about 20% for VPA and 10% for TZ. A series of the TDC characteristic measurements show that the jitter for both preamplifiers is about 20 ps, and the time-walk effect is mild for inject charge > 12 pF. Furthermore, the beta source radiation results quantify the sharing scale of the 3x3 pixels AC-LGAD (? 20%). The electronics simulation study results show no significant changes in the spatial resolution, whether ADC resolution is 8, 10, or 12 bits. The 8-bit ADC is decided to use in the EICROC as it has a smaller size and power consumption than the 10-bit and 12-bit ADC. The ECCE is one of the full detector proposals for EIC. The new type of DVCS generator, called TOPEG, is used to generate the high acceptance beam configurations of 18×110 GeV2 electron and 4He. The acceptance study shows a -1.8 < ? < -1.4 gap between the BEMC and EEMC. The 10?x,y geometry cut is applied on the Roman Pots, so the acceptance of Roman Pots quickly drops to 0% when the polar angle of the recoiled 4He < 2 mrad. This primary ECCE simulation study suggests extending the acceptance of BEMC longitudinally as the structure limits the radial size of EEMC. The acceptance of the Roman Pots is still challenging. In 2023, The overall design of ePIC was finalized by merging two full detector proposals (ECCE and ATHENA) after a series of intensive simulation studies.

Wang, Pu-Kai↗
DOE OSTI2021

Sustainable and Inexpensive Polydimethylsiloxane Sponges for Daytime Radiative Cooling

Radiative cooling is an emerging cooling technology that can passively release heat to the environment. To obtain a subambient cooling effect during the daytime, chemically engineered structural materials are widely explored to simultaneously reject sunlight and preserve strong thermal emission. However, many previously reported fabrication processes involve hazardous chemicals, which can hinder a material’s ability to be mass produced. In order to eliminate the hazardous chemicals used in the fabrication of previous works, this article reports a white polydimethylsiloxane (PDMS) sponge fabricated by a sustainable process using microsugar templates. By substituting the chemicals for sugar, the manufacturing procedure produces zero toxic waste and can also be endlessly recycled via methods widely used in the sugar industry. The obtained porous PDMS exhibits strong visible scattering and thermal emission, resulting in an efficient temperature reduction of 4.6 °C and cooling power of 43 W m –2 under direct solar irradiation. In addition, due to the air-filled voids within the PDMS sponge, its thermal conductivity remains low at 0.06 W (m K) –1 . This unique combination of radiative cooling and thermal insulation properties can efficiently suppress the heat exchange with the solar-heated rooftop or the environment, representing a promising future for new energy-efficient building envelope material.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Efficient smoothed particle radiation hydrodynamics I: Thermal radiative transfer

This work presents efficient solution techniques for radiative transfer in the smoothed particle hydrodynamics discretization. Two choices that impact efficiency are how the material and radiation energy are coupled, which determines the number of iterations needed to converge the emission source, and how the radiation diffusion equation is solved, which must be done in each iteration. The coupled material and radiation energy equations are solved using an inexact Newton iteration scheme based on nonlinear elimination, which reduces the number of Newton iterations needed to converge within each time step. During each Newton iteration, the radiation diffusion equation is solved using Krylov iterative methods with a multigrid preconditioner, which abstracts and optimizes much of the communication when running in parallel. The code is verified for an infinite medium problem, a one-dimensional Marshak wave, and a two and three-dimensional manufactured problem, and exhibits first-order convergence in time and second-order convergence in space. For these problems, the number of iterations needed to converge the inexact Newton scheme and the diffusion equation is independent of the number of spatial points and the number of processors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Constraining the Low-Temperature Oxidation Mechanism of n -Hexanol through the Detection and Identification of C 6 Elusive Intermediates

Alcohol-based fuels are currently considered to be viable energy carriers for the transportation sector. Consequently, a comprehensive mechanistic understanding of the low-temperature oxidation of alcohols is essential for application in advanced low-temperature compression engines. Here, in this work, a multidimensional approach involving experimental investigations, kinetic modeling, and theoretical calculations was used to provide new insights into the low-temperature oxidation mechanism of a C 6 alcohol, n -hexanol (CH 3 (CH 2 ) 5 OH), through the detection and identification of elusive C 6 intermediates. The oxidation of n-hexanol was investigated in a jet-stirred reactor under stoichiometric conditions (ϕ = 1.0), an initial fuel concentration of 2%, a residence time of 2 s, a temperature range between 500 and 660 K, and a pressure of 700 Torr. The reactants, intermediates, and final products were detected and identified by means of molecular-beam mass spectrometry coupled with single-photon ionization employing tunable synchrotron-generated vacuum ultraviolet radiation. Chemical kinetic simulations were performed using a previously published kinetic model (Togbé et al., Energy Fuels 2010, 11, 5859−5875) to predict the reactivity of n-hexanol and elucidate the predominant formation pathways of the observed low-temperature species. Experimental photoionization efficiency curves in conjunction with ab initio calculations, enabled the identification of important low-temperature species, such as C 6 unsaturated alcohols, C 6 olefinic hydroperoxides, C 6 cyclic ethers, C 6 diones, and C 6 ketohydroperoxides. The results of this study provide valuable insight into the mechanism of the low-temperature oxidation chemistry of n -hexanol, contributing to the development of kinetic models for the low-temperature oxidation of n-hexanol and other long-chain linear alcohols.

alcohols↗