Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTOR FUELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Dielectric Heaters for Testing Spacecraft Nuclear Reactors

A document proposes the development of radio-frequency-(RF)-driven dielectric heaters for non-nuclear thermal testing of the cores of nuclear-fission reactors for spacecraft. Like the electrical-resistance heaters used heretofore for such testing, the dielectric heaters would be inserted in the reactors in place of nuclear fuel rods. A typical heater according to the proposal would consist of a rod of lossy dielectric material sized and shaped like a fuel rod and containing an electrically conductive rod along its center line. Exploiting the dielectric loss mechanism that is usually considered a nuisance in other applications, an RF signal, typically at a frequency .50 MHz and an amplitude between 2 and 5 kV, would be applied to the central conductor to heat the dielectric material. The main advantage of the proposal is that the wiring needed for the RF dielectric heating would be simpler and easier to fabricate than is the wiring needed for resistance heating. In some applications, it might be possible to eliminate all heater wiring and, instead, beam the RF heating power into the dielectric rods from external antennas.

Sims, William Herbert↗
NASA NTRS2010

Status of Kilowatt-Class Stirling Power Conversion Using a Pumped NaK Loop for Thermal Input

Free-piston Stirling power conversion has been identified as a viable option for potential Fission Surface Power (FSP) systems on the Moon and Mars. Proposed systems consist of two or more Stirling convertors, in a dual-opposed configuration, coupled to a low-temperature uranium-dioxide-fueled, liquid-metal-cooled reactor. To reduce developmental risks associated with liquid-metal loop integration, a test rig has been built to evaluate the performance of a pair of 1-kW free-piston Stirling convertors using a pumped sodium-potassium (NaK) loop for thermal energy input. Baseline performance maps have been generated at the Glenn Research Center (GRC) for these 1-kW convertors operating with an electric heat source. Each convertor was then retrofitted with a custom-made NaK heater head and integrated into a pumped NaK system at the Marshall Space Flight Center (MSFC). This paper documents baseline testing at GRC as well as the progress made in integrating the Stirling convertors into the pumped NaK loop.

Briggs, Maxwell H.↗
NASA NTRS2019

Common Power and Energy Storage Solutions to Support Lunar and Mars Surface Exploration Missions

Future human exploration missions on the moon and Mars will require a new generation of power sources to sustain crew members and leverage in-situ resources. Long-duration human missions to the lunar and Martian surface will likely include large-scale landers, crew habitats, pressurized rovers, and in-situ propellant production plants. The power demands for these surface elements, whether on the moon or Mars, will be similar starting with robotic precursor missions in the multi-kilowatt range scaling to 10s of kilowatts as the crew presence expands and local propellant production is established. While the power requirements may be similar, the vastly different environments on the two surfaces present unique challenges for power generation and storage systems. Candidate technologies to satisfy the surface power needs include deployable solar arrays, regenerative fuel cells, and small fission reactors. This paper presents strategies for power system architectures with elements that can be used on the moon and are extensible to Mars with features that make them resilient to either environment.

Mason, Lee↗
NASA NTRSDate not supplied

Additive Manufacturing of ZrC for Nuclear Thermal Propulsion Applications

Looking into the future, we are seeing that nuclear is becoming a more and more viable fuel source for space applications due to it being one of the safest energy forms, low greenhouse gas emissions, and inexpensive maintenance. National Aeronautics and Space Administration (NASA) and a few others are looking at nuclear fuels in relation to space travel, specifically in the form of Nuclear Thermal Propulsion (NTP) [1]. NTP provides the answer for space travel to Mars where chemical rockets would not complete the job. A concept art of what these spacecrafts could look like is shown (Figure 1). Uranium Carbide fuel has been chosen to heat a liquid propellant for propulsion. The complex fuel geometries required by space reactors can be achieved by novel techniques fairly easily, cheaply, and safely. In this specific study, we are looking at using Zirconium Carbide (ZrC) to use as a surrogate for Uranium Carbide (UC) due to their similar behaviors under high temperatures. An ink made with ZrC will be made and will be extruded into unique, complex geometries. This is a great starting point to test additive manufacturing on these ceramics.

Additive Manufacturing↗
NASA NTRS1972

Fabrication of fuel pin assemblies, phase 3

Five full size and eight reduced length fuel pins were fabricated for irradiation testing to evaluate design concepts for a fast spectrum lithium cooled compact space power reactor. These assemblies consisted of uranium mononitride fuel pellets encased in a T-111 (Ta-8W-2Hf) clad with a tungsten barrier separating fuel and clad. Fabrication procedures were fully qualified by process development and assembly qualification tests. Detailed specifications and procedures were written for the fabrication and assembly of prototype fuel pins.

Keeton, A. R.↗
NASA NTRS2001

A Survey of Alternative Oxygen Production Technologies

Utilization of the Martian atmosphere for the production of fuel and oxygen has been extensively studied. The baseline fuel production process is a Sabatier reactor, which produces methane and water from carbon dioxide and hydrogen. The oxygen produced from the electrolysis of the water is only half of that needed for methane-based rocket propellant, and additional oxygen is needed for breathing air, fuel cells and other energy sources. Zirconia electrolysis cells for the direct reduction of CO2 arc being developed as an alternative means of producing oxygen, but present many challenges for a large-scale oxygen production system. The very high operating temperatures and fragile nature of the cells coupled with fairly high operating voltages leave room for improvement. This paper will survey alternative oxygen production technologies, present data on operating characteristics, materials of construction, and some preliminary laboratory results on attempts to implement each. Our goal is to significantly improve upon the characteristics of proposed zirconia cells for oxygen production. To achieve that goal we are looking at electrolytic systems that operate at significantly lower temperatures, preferably below 31C to allow the incorporation of liquid CO2 in the electrolyte. Our preliminary results indicate that such a system will have much higher current densities and have simpler cathode construction than a porous gas feed electrode system. Such a system could be achieved based on nonaqueous electrolytes or ionic liquids. We are focusing our research on the anode reaction that will produce oxygen from a product generated at the cathode using CO2 as the feed. Operation at low temperatures also will open up the full range of polymer and metal materials, allowing a more robust system design to withstand the rigors of flight, landing, and long term unattended operation on the surface of Mars.

Lueck, Dale E.↗
NASA NTRS2000

A Survey of Alternative Oxygen Production Technologies

Utilization of the Martian atmosphere for the production of fuel and oxygen has been extensively studied. The baseline fuel production process is a Sabatier reactor, which produces methane and water from carbon dioxide and hydrogen. The oxygen produced from the electrolysis of the water is only half of that needed for methane-based rocket propellant, and additional oxygen is needed for breathing air, fuel cells and other energy sources. Zirconia electrolysis cells for the direct reduction of CO2 are being developed as an alternative means of producing oxygen, but present many challenges for a large-scale oxygen production system. The very high operating temperatures and fragile nature of the cells coupled with fairly high operating voltages leave room for improvement. This paper will survey alternative oxygen production technologies, present data on operating characteristics, materials of construction, and some preliminary laboratory results on attempts to implement each.

Lueck, Dale E.↗
NASA NTRS1973

Reactor moderator, pressure vessel, and heat rejection system of an open-cycle gas core nuclear rocket concept

A preliminary design study of a conceptual 6000-megawatt open-cycle gas-core nuclear rocket engine system was made. The engine has a thrust of 196,600 newtons (44,200 lb) and a specific impulse of 4400 seconds. The nuclear fuel is uranium-235 and the propellant is hydrogen. Critical fuel mass was calculated for several reactor configurations. Major components of the reactor (reflector, pressure vessel, and waste heat rejection system) were considered conceptually and were sized.

Taylor, M. F.↗
NASA NTRS2016

A Multi-Dimensional Heat Transfer Model of a Tie-Tube and Hexagonal Fuel Element for Nuclear Thermal Propulsion

The Space Capable Cryogenic Thermal Engine (SCCTE) effort considers a nuclear thermal rocket design based around a Low-Enriched Uranium (LEU) design fission reactor. The reactor core is comprised of bundled hexagonal fuel elements that directly heat hydrogen for expansion in a thrust chamber and hexagonal tie-tubes that house zirconium hydride moderator mass for the purpose of thermalizing fast neutrons resulting from fission events. Created 3D steady state Hex fuel rod model with 1D flow channels. Hand Calculation were used to set up initial conditions for fluid flow. The Hex Fuel rod uses 1D flow paths to model the channels using empirical correlations for heat transfer in a pipe. Created a 2-D axisymmetric transient to steady state model using the CFD turbulent flow and Heat Transfer module in COMSOL. This model was developed to find and understand the hydrogen flow that might effect the thermal gradients axially and at the end of the tie tube where the flow turns and enters an annulus. The Hex fuel rod and Tie tube models were made based on requirements given to us by CSNR and the SCCTE team. The models helped simplify and understand the physics and assumptions. Using pipe correlations reduced the complexity of the 3-D fuel rod model and is numerically more stable and computationally more time-efficient compared to the CFD approach. The 2-D axisymmetric tie tube model can be used as a reference "Virtual test model" for comparing and improving 3-D Models.

Gomez, C. F.↗
NASA NTRS1991

Heat transfer analysis of fuel assemblies in a heterogeneous gas core nuclear rocket

Heat transfer problems of a heterogeneous gaseous core nuclear rocket were studied. The reactor core consists of 1.5-m long hexagonal fuel assemblies filled with pressurized uranium tetrafluoride (UF4) gas. The fuel gas temperature ranges from 3500 to 7000 K at a nominal operating condition of 40 atm. Each fuel assembly has seven coolant tubes, through which hydrogen propellant flows. The propellant temperature is not constrained by the fuel temperature but by the maximum temperature of the graphite coolant tube. For a core achieving a fission power density of 1000 MW/cu m, the propellant core exit temperature can be as high as 3200 K. The physical size of a 1250 MW gaseous core nuclear rocket is comparable with that of a NERVA-type solid core nuclear rocket. The engine can deliver a specific impulse of 1020 seconds and a thrust of 330 kN.

Watanabe, Yoichi↗
NASA NTRS1980

Catalytic combustion of heavy partially-vaporized fuels

An experimental program to demonstrate efficient catalytic combustion of fuel-lean and fuel-rich mixtures of residual fuel and air, and to assess the influence of incomplete fuel vaporization on the performance of a catalytic reactor is being conducted. A 7.5-cm diameter catalytic reactor was designed and will be tested over a matrix of conditions representative of a gas turbine combustor inlet. For each of three test phases, two series of tests with a uniform but poorly vaporized (less than 50 percent) mixture of No. 6 fuel oil and air will be performed. In the first series, the non-vaporized fuel will be contained in a spray of droplets with a Sauter Mean Diameter (SMD) less than 30 microns. In the second series, the non-vaporized fuel will be characterized by a spray SMD approximately equal to 100 microns. The designs of the fuel injection system and the catalytic reactor are described in this paper.

Rosfjord, T. J.↗
NASA NTRSDate not supplied

Lattice Confinement Fusion & Fast Fission for Space

Lattice Confinement Fusion (LCF) 1 • Fusion of hydrogen isotopes into helium isotopes • No tokamak magnets or laser power supplies • Nuclear fuel is confined and triggered within lattice • Nuclear reactions enhanced by electron screening • Extended Electrodynamics (EED) role • NASA published results in Physical Review C 2,3 • Locally hot but globally cold • Commercialized in 2025 to produce medical radioisotopes 4 Lattice Confinement Fusion Fast-Fission Hybrid Reactor • Fusion neutrons fission uranium, spent fuel rods or thorium • No enriched uranium, cleaner fission! • Demonstrated with US Navy and GEC • Supported by NASA STMD (NIAC) and NSF Application • LEO, Deep Space Power and High I sp Propulsion • (Terrestrial)

lattice confinement fusion↗
NASA NTRS2012

Nuclear Thermal Rocket Element Environmental Simulator (NTREES) Upgrade Activities

To support the on-going nuclear thermal propulsion effort, a state-of-the-art non nuclear experimental test setup has been constructed to evaluate the performance characteristics of candidate fuel element materials and geometries in representative environments. The facility to perform this testing is referred to as the Nuclear Thermal Rocket Element Environment Simulator (NTREES). This device can simulate the environmental conditions (minus the radiation) to which nuclear rocket fuel components will be subjected during reactor operation. Test articles mounted in the simulator are inductively heated in such a manner so as to accurately reproduce the temperatures and heat fluxes which would normally occur as a result of nuclear fission and would be exposed to flowing hydrogen. Initial testing of a somewhat prototypical fuel element has been successfully performed in NTREES and the facility has now been shutdown to allow for an extensive reconfiguration of the facility which will result in a significant upgrade in its capabilities

Emrich, William J. Jr.↗
NASA NTRS2013

Nuclear Thermal Rocket Element Environmental Simulator (NTREES) Phase II Upgrade Activities

To support the on-going nuclear thermal propulsion effort, a state-of-the-art non nuclear experimental test setup has been constructed to evaluate the performance characteristics of candidate fuel element materials and geometries in representative environments. The facility to perform this testing is referred to as the Nuclear Thermal Rocket Element Environment Simulator (NTREES). This device can simulate the environmental conditions (minus the radiation) to which nuclear rocket fuel components will be subjected during reactor operation. Test articles mounted in the simulator are inductively heated in such a manner so as to accurately reproduce the temperatures and heat fluxes which would normally occur as a result of nuclear fission and would be exposed to flowing hydrogen. Initial testing of a somewhat prototypical fuel element has been successfully performed in NTREES and the facility has now been shutdown to allow for an extensive reconfiguration of the facility which will result in a significant upgrade in its capabilities. Keywords: Nuclear Thermal Propulsion, Simulator

Emrich, William J.↗
NASA NTRSDate not supplied

Mini-Nozzles for Individual Fuel Elements for NTP Systems NETS

The Testing Reference Design (TRD) reactor and engine for Nuclear Thermal Propulsion (NTP) systems typically use a large single nozzle with regenerative cooling which contributes a significant portion of the engine mass. Furthermore, if a fuel element is damaged or the flow is otherwise compromised, stagnant or backflow is expected which would further damage the reactor and engine. Therefore, the current analysis attempts to solve this potential issue by considering individual, smaller nozzles allocated for each individual fuel element while also neglecting regenerative cooling flow due to lower hoop stresses from the chamber pressure. However, a material that can withstand the chamber temperatures should be considered such as molybdenum or tungsten or a mixture of the two.

Daria Nikitaeva↗
NASA NTRS1960

A Coaxial Flow Reactor - A Gaseous Nuclear-Rocket Concept

Aspects of a new gaseous nuclear-rocket concept are considered. The principle of this type of cavity reactor is one of maintaining the separation of two coaxial streams - fuel within propellant - rather than attaining the separation of fuel propellant gases within the cavity. An acceptably low uranium consumption rate is possible if the fuel stream can be maintained at an axial velocity which is 1/100 to 1/1000 of the propellant velocity. An elementary hydrodynamic analysis for laminar incompressible flow indicates that the average uranium core velocity may only reach 2 to 11 times the initial core velocity for a typical reactor. The results of a 1-D criticality analysis for a D2O/(235)U system show that the effect of shrinking the fuel region within the reactor cavity is not serious; the effects of moderator heating and structural materials on critical mass are also shown. Overall rocket performance calculations are made for reasonable operating conditions; these results indicate that thrusts from 25,000 to 50,000 pounds and accelerations from 10(exp -1) to 3 g are possible.

Robert G Ragsdale↗
NASA NTRS1983

Catalytic oxidation of very fuel rich mixtures

The objective of this research is to demonstrate the feasibility of using a catalytic reactor as a tool to study soot formation from the fuel rich side of the soot limit (null set = 3 - 6). The experimental approach to be taken in the first phase of the research is to document that a hydrocarbon fuel can be burnt at very rich equivalence ratios without forming soot. A simple mono-component fuel, iso-octane, will be used as the test fuel. To insure that combustion is uniform across the catalyst bed, measurements will be made of the fuel-air equivalence ratio profile across the inlet and the temperature and product distribution across the outlet. Phase Two will be to use this environment as a testing ground for determining the effect the structure of a hydrocarbon fuel has on its tendency to form soot. Various amounts of organic compounds such as benzene will be added to the iso-octane and the reaction products studied. Other compounds to be tested will xylene, toluene, and naphthalene.

Brabbs, T. A.↗