Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A comparison of pulsed and continuous lasers for high-temperature Raman measurements of anhydrite

Oxygen carrier particles (OCPs) serve as fuel oxidant in emerging chemical looping combustion systems. However, chemical looping combustion process optimization is hindered by the lack of online sensors for measurements of OCP oxidation states at temperatures up to 1,000 °C and pressures up to 10 atm. We are investigating Raman spectroscopy as a potential solution, as this technique is known for its ability to provide noninvasive, molecularly specific information in real time in a wide variety of applications. As a case study, Raman spectra from high–temperature (>1,000 °C) anhydrite, a potential OCP, are presented using pulsed and continuous wave excitation at 532 nm. When pulsed excitation is coupled with time–gated detection, background signal from thermal radiation can be significantly reduced from single pulse spectra, outperforming results using an ungated detector. Also, laser heating of the sample is not observed but laser–induced breakdown spectra increasingly appear with increasing temperature and pulse intensity. Compared with pulsed excitation, continuous wave excitation with longer acquisition time, offers higher signal to noise and avoids the risk for laser–induced breakdown spectra but demonstrates minor sample heating. Finally, the data demonstrate practical utility by (a) providing a calibration of anhydrite's ν 1 (1,017 cm –1 ) Raman temperature–dependent band position and by (b) providing estimates of temperature using the ratios of the Stokes/anti–Stokes ν 1 integrated intensities. Furthermore, these results demonstrate the first high–temperature, pulsed Raman spectra from anhydrite while evaluating challenges associated with high–temperature, Raman measurements of OCP materials in general.

20 FOSSIL-FUELED POWER PLANTS↗

Spectral characteristics of nanoamorphous phosphors obtained by evaporation of Sr{sub 2}Gd{sub 8}(SiO{sub 4}){sub 6}O{sub 2}: Eu polycrystals

Amorphous nanophosphors have been obtained for the first time by pulsed electron beam evaporation of targets from bulk polycrystalline phosphors of the composition Sr{sub 2}Gd{sub 8}(SiO{sub 4}){sub 6}O{sub 2}: Eu with oxyapatite structure. The processes of crystallization of amorphous nanopowder were studied using differential scanning calorimetry and termogravimetry (40−1400 °C). It was found that the Raman spectra of the samples are modified when the particles decrease from bulk to nanodimensional state. The spectral and luminescent characteristics of the phosphors in polycrystalline and nanoamorphous states have been examined. It was established that Eu{sup 3+} forms two types of optical centers. Unlike bulk phosphors, in the nanophosphors no Eu{sup 2+} ions are formed. The ratio of red to orange luminescence intensity for nanophosphors was found to increase as compared with bulk phosphors. This effect is due to disordering of nanoparticles. A resonant transfer of excitation energy from Gd{sup 3+} to Eu{sup 3+} ions was found in bulk and nanophosphors. Upon transition from polycrystalline to nanoamorphous state and laser excitation of phosphors, the luminescence intensity of Eu{sup 3+} ions increases approximately 10 times. This effect is explained in the framework of the configuration coordinates model. - Graphical abstract: Schematic configurational-coordinate diagram for Eu{sup 3+} ion in polycrystalline Sr{sub 2}Gd{sub 6.4}Eu{sub 1.6}Si{sub 6}O{sub 26−δ} and nanoamorphous phosphor. - Highlights: • Nanoamorphous phosphor is obtained by electron-beam evaporation of bulk silicate. • In nanoamorphous samples Raman spectra are modified intensity. • Nanofosfor luminescence by 10 times more intensively, than bulk phosphorus. • There is a transfer of energy of excitation from Gd{sup 3+} to Eu{sup 3+} in bulk- and nanophosphor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and ferroelectric studies of (Ba{sub 0.85}Ca{sub 0.15})(Ti{sub 0.9}Zr{sub 0.1})O{sub 3} piezoelectric ceramics

Graphical abstract: - Highlights: • (Ba{sub 0.85}Ca{sub 0.15})(Ti{sub 0.9}Zr{sub 0.1})O{sub 3} (BCTZO) ceramic was synthesized by the ceramic method. • In situ XRD and Raman spectra showed the phase transition of BCTZO around 360 K. • The ceramics showed a tunability of 82% at 40 kV cm{sup −1} electric field. • BCTZO exhibited good quality factor of 111 at microwave frequencies. • Piezoforce microscopy studies indicated the switchability of ferroelectric domains. - Abstract: We have synthesized and studied the structural and ferroelectric properties of lead-free 0.5(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3}–0.5Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3} ceramics in the temperature region of its ferroelectric transition. The synthesized material showed high dielectric constant, low loss and good pyroelectric figure of merit. From the temperature dependent X-ray diffraction measurements, we determined the tricritical point to be in the temperature range of 303–400 K. The dielectric measurements indicate a diffuse ferroelectric phase transition (DPT) around 360 K in agreement with the X-ray measurements. We studied the evolution of Raman spectra with temperature to understand the nature of phase transition in BaTiO{sub 3} (BTO) and the BCTZO. The results indicates that the transition of ferroelectric–paraelectric state is not sharp as in the case of BTO and the polar state persists through the paraelectric state. In general, our study indicates that there are ferroelectric domains of nanometer size beyond the commonly defined transition temperature. The observation of local piezoelectric hysteresis loop indicated the existence of intrinsic ferroelectric property of the ceramic at the nanoscale. The ceramics exhibited electric field tunable dielectric properties with a tunability of 82% at an applied DC field of 40 kV cm{sup −1}, low dielectric loss of 0.001 and room temperature pyroelectric coefficient of 6 × 10{sup −8} C cm{sup −2} K{sup −1} and the detectivity of 1.9 × 10{sup −8} C cm{sup −1} J{sup −1}; larger than those reported for other BaTiO{sub 3}-based materials. Overall, our results indicate that BCTZO ceramics with coexistence of rhombohedral–tetragonal phases is a promising candidate for lead-free ferroelectric applications.

36 MATERIALS SCIENCE↗

Dielectric relaxation near 25 K in multiferroic BiFeO{sub 3} ceramics

Our investigations using low-temperature Raman spectroscopy, dielectric, and magnetodielectric studies of as-prepared and vacuum-annealed BiFeO{sub 3} ceramics revealed two dielectric anomalies near 25 and 281 K. Systematic studies were carried out to probe the anomaly near 25 K which exhibits clear frequency dependence and falls close to a previously observed magnetic transition. The low-temperature dielectric relaxation behavior yielded characteristic energy scales of {approx}30 and {approx}34 meV for the as-prepared and vacuum-annealed BiFeO{sub 3} samples, respectively. Raman spectra showed hardening of the E(TO6) and E(TO9) modes near 25 K, and the Raman shift in phonon frequencies is found to be broader in the vacuum-annealed BiFeO{sub 3} than in the as-prepared BiFeO{sub 3}. We observed a linear magnetodielectric coupling in both samples at 25 K. These experimental results suggest that coupling among spin, lattice, and dielectric properties persist to low temperatures in BiFeO{sub 3}.

36 MATERIALS SCIENCE↗

Design and Build a Compact Raman Sensor for Identification of Chemical Composition

A compact remote Raman sensor system was developed at NASA Langley Research Center. This sensor is an improvement over the previously reported system, which consisted of a 532 nm pulsed laser, a 4-inch telescope, a spectrograph, and an intensified charge-coupled devices (CCD) camera. One of the attractive features of the previous system was its portability, thereby making it suitable for applications such as planetary surface explorations, homeland security and defense applications where a compact portable instrument is important. The new system was made more compact by replacing bulky components with smaller and lighter components. The new compact system uses a smaller spectrograph measuring 9 x 4 x 4 in. and a smaller intensified CCD camera measuring 5 in. long and 2 in. in diameter. The previous system was used to obtain the Raman spectra of several materials that are important to defense and security applications. Furthermore, the new compact Raman sensor system is used to obtain the Raman spectra of a diverse set of materials to demonstrate the sensor system's potential use in the identification of unknown materials.

Garcia, Christopher S.↗

Photonic-bandgap-fiber sensors for gas detection

Currently, the technology available for rapid detection and characterization of different gaseous species is limited. Existing methods are either too slow or too error-prone to allow the real-time analysis of similar gasses in a mixture. Although marginal success has been reported using other techniques, we believe that Raman spectroscopy possesses the clearest capabilities to serve as a gas sensing tool. Because spontaneous Raman spectroscopy produces signals which vary linearly with gas concentration, and Raman spectra are unique to individual molecules, this technique provides both concentration and definitive identification information. Unfortunately, Raman crosssections for most gasses of interest are extremely small and detected powers are usually tiny.

99 GENERAL AND MISCELLANEOUS↗

Magnetic and low temperature phonon studies of CoCr{sub 2}O{sub 4} powders doped with Fe(III) and Ni(II) ions

Extensive temperature-dependent phonon studies and low-temperature magnetic measurements of CoCr{sub 2−x}Fe{sub x}O{sub 4} (for x=0.5, 1 and 2) and Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} polycrystalline powders are presented. The main aim of these studies was to obtain information on phonon and structural properties of these compounds as well as strength of spin–phonon coupling in the magnetically ordered phases. IR and Raman spectra show that doping of CoCr{sub 2}O{sub 4} with Fe(III) ions leads to broadening of bands and appearance of new bands due to the formation of inverted spinel structure. In contrast to this behavior, doping with 10 mol% of Ni(II) ions leads to weak increase of band width only. Magnetization measured as a function of temperature and external magnetic field showed that magnetic properties of Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} sample are similar to those reported for pure CoCr{sub 2}O{sub 4}, i.e., partial substitution of Ni(II) for Co(II) leads to slight shift of the ferrimagnetic phase transition at T{sub C} and spiral spin order transition at T{sub S} towards lower values. The change of crystallization preference induced by incorporation of increasing concentration of Fe(III) ions in the spinel lattice causes significant increase of T{sub C} and decrease of T{sub S}. The latter transition disappears completely for higher concentrations of Fe(III). The performed temperature-dependent IR studies revealed interesting anomalous behavior of phonons below T{sub C} for CoCr{sub 1.5}Fe{sub 0.5}O{sub 4} and Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4}, which was attributed to spin–phonon coupling. - Graphical abstract: Visualization of normal spinel-type AB{sub 2}O{sub 4} structure, where blue octahedrons denote BO{sub 6} and red tetrahedrons AO{sub 4} units as well as IR and Raman spectra of Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} powder. - Highlights: • T{sub C} (T{sub S}) increases (decreases) with increasing Fe(III) concentration. • Ni(II) ions doping up to 10 mol% does not change remarkably T{sub C} and T{sub S}. • Doping with Fe(III) ions causes increase of spinel inversion parameter. • Spin–phonon interactions in Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} and CoCr{sub 1.5}Fe{sub 0.5}O{sub 4} were evidenced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Calculation of the Geometry and Vibrational Frequencies of Triphenylmethane

Raman spectra of polycrystalline triphenylmethane (TPM) are recorded at room temperature in the range 4000–400 cm{sup –1}. The optimum structure and vibrational (Raman and IR) spectra of TPM are calculated using the B3LYP/6-311G(d,p) approximation. Theoretical modes and bands corresponding to them in the experimental Raman spectrum are assigned to stretching and bending vibrations of certain bonds in the TPM molecule based on visualization of the vibrations. Most bands, in particular, the strongest ones in the Raman spectra of TFM, are due to vibrations in monosubstituted benzene rings. Some of the theoretical modes and the corresponding experimental bands are assigned to benzene modes in Wilson notation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth and Strain Engineering of Trigonal Te for Topological Quantum Phases in Non-Symmorphic Chiral Crystals

Strained trigonal Te has been predicted to host Weyl nodes supported by a non-symmorphic chiral symmetry. Using low-pressure physical vapor deposition, we systematically explored the growth of trigonal Te nanowires with naturally occurring strain caused by curvature of the wires. Raman spectra and high mobility electronic transport attest to the highly crystalline nature of the wires. Comparison of Raman spectra for both straight and curved nanowires indicates a breathing mode that is significantly broader and shifted in frequency for the curved wires. Strain induced by curvature during growth therefore may provide a simple pathway to investigate topological phases in trigonal Te.

36 MATERIALS SCIENCE↗

Raman characterization of boron doped tetrahedral amorphous carbon films

Boron doped tetrahedral amorphous carbon films, having boron content from 0.59 to 6.04 at.%, have been prepared by a filtered cathodic vacuum arc system using boron mixed graphite targets. The influence of boron on the surface morphologies and microstructures of the films was studied by atomic force microscopy and Raman spectroscopy. The surface images showed that the irregular tops on the surface of the films tended to form larger clusters as boron content increased. The Raman spectra of the films were, respectively, deconvoluted using Gaussian and Breit-Wigner-Fano line shapes. The Raman parameters, including the intensity ratios, peak positions, peak widths and coupling coefficients, obtained from both line shapes were described and compared. It was found that both line shapes could produce consistent results except the peak widths of G bands. The major effect of boron introduction was to increase the clustering of the sp{sup 2} phase in the films.

36 MATERIALS SCIENCE↗

Photochromic Properties and Surface Enhanced Raman Scattering Spectra of Indoline Spiropyran in Silver-Based Nanocomposite Films

The structure and photochromic transformations of composite organometallic nanosystems composed of Ag nanoparticles covered with a layer of indoline-spiropyran (ISP) molecules from solutions were studied by spectrophotometry, surface Raman scattering spectroscopy (SERS) and quantum chemistry. Analysis of experimental data showed that studied nanostructured systems have photochromic properties, manifested in the reversible photo-induced changes both of the electronic-absorption spectra and of the relative intensity of the SERS bands. The open form of ISP, formed in the organometallic nanostructured film as a result of photochromic transformations, has an adsorption geometry, and, possibly, a conformation different from that formed as a result of chemisorption of ISP molecules on silver colloids.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, Vibrational Spectra, and DFT Simulations of 3-bromo-2-methyl-5-(4-nitrophenyl)thiophene

A new thiophene derivative, 3-bromo-2-methyl-5-(4-nitrophenyl)thiophene (2), was synthesized through the Suzuki coupling reaction of 4-bromo-5-methylthiophen-2-ylboronic acid (1) and 4-iodonitrobenzene, and its structure was confirmed by nuclear magnetic resonance (NMR), low and high resolution mass spectrometry (HRMS), Fourier transform infrared spectroscopy (FT-IR), and X-ray investigations of the crystal structure. The FT-IR spectra (4000–400 cm{sup –1}), Raman spectra (4000–100 cm{sup –1}), and theoretical vibrational frequencies of this new substance were investigated. Its theoretically established geometric parameters and calculated vibrational frequencies are in good agreement with the reported experimental data. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energies and other related parameters of the compound were calculated. The ionization potentials given by the B3LYP and HF (Hartree–Fock) methods for this new compound are –0.30456 and –0.30501 eV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polarization Raman spectroscopy of GaN nanorod bundles

We performed polarization Raman spectroscopy on single wurtzite GaN nanorod bundles grown by plasma-assisted molecular beam epitaxy. The obtained Raman spectra were compared with those of GaN epilayer. The spectral difference between the GaN nanorod bundles and epilayer reveals the relaxation of Raman selection rules in these GaN nanorod bundles. The deviation of polarization-dependent Raman spectroscopy from the prediction of Raman selection rules is attributed to both the orientation of the crystal axis with respect to the polarization vectors of incident and scattered light and the structural defects in the merging boundary of GaN nanorods. The presence of high defect density induced by local strain at the merging boundary was further confirmed by transmission electron microscopy. The averaged defect interspacing was estimated to be around 3 nm based on the spatial correlation model.

36 MATERIALS SCIENCE↗

Behavior of silver molybdate at high-pressure

Behavior of cubic spinel phase of Ag{sub 2}MoO{sub 4} is investigated at high pressure using X-ray diffraction and Raman spectroscopy. The P-V data are fitted to a third order Birch-Murnaghan equation of state using a value of B{sub 0}=113 GPa and B Prime {sub 0}=4. The compound is also found to exhibit a phase transition around 5 GPa to a tetragonal structure and the two phases are found to coexist over a range of pressures. Raman spectra exhibit dramatic changes across the phase transition. Increase of X-ray background scattering and broadening of the Raman peaks associated with MoO{sub 4} tetrahedral ions in the high pressure phase suggest evolution of positional disorder. However, no evidence of pressure-induced amorphization was found up to 47 GPa. - Graphical abstract: Evolution of the integrated intensity of all the diffraction peaks between 12 and 18 degree 2{theta} as a function of pressure. The rapid decrease of the intensity suggests evolution of positional disorder in the high-pressure tetragonal phase. Highlights: Black-Right-Pointing-Pointer First in-situ X-ray diffraction and Raman study of cubic silver molybdate at high pressure. Black-Right-Pointing-Pointer Commencement of a structural transition to a tetragonal phase is found at 2.3 GPa. Black-Right-Pointing-Pointer The high-pressure phase is found to have positional disorder. Black-Right-Pointing-Pointer A bulk modulus of 113 GPa is obtained from the equation of state.

36 MATERIALS SCIENCE↗

Synthesis and characterisation of In-doped MnWO{sub 4}-type solid-solutions: Mn{sub 1−3x}In{sub 2x}□{sub x}WO{sub 4} (x=0–0.11)

Substitution of In{sup 3+} for Mn{sup 2+} in MnWO{sub 4}, which is one of the most studied multiferroics, was conducted systematically by solid-state reactions at 1050 °C to obtain a series of Mn{sub (1−3x)}In{sub 2x}□{sub x}WO{sub 4} solid solutions (x=0–0.11; the box indicates vacancy). The successful In-doping could be proven by electron microprobe, and statically disordered structures of this solid solution series were elucidated by Rietveld analyses with X-Ray powder diffraction (XPD) data. Its average structure maintains the space group P2/c at least up to the replacement of 33 at% Mn. The tendency of their unit cells proportionally enlarging with In-doping is an unexpected observation because In{sup 3+} is smaller than Mn{sup 2+}. This could not be explained alone by average atomic bonding distances and angles evaluated from XPD data analyses. Complimentarily, micro-Raman spectra of Mn{sub (1−3x)}In{sub 2x}□{sub x}WO{sub 4} materials feature a hardening of Raman modes due to stronger atomic bonds in W{sub 2}O{sub 4} and WO{sub 2} units with increasing In-doping. This is considered as an inevitable consequence of broken bonding in directly neighbouring Mn–O bonds as the presence of In{sup 3+} in MnWO{sub 4} accompanies the creation of defects at Mn sites. The current study using XRD and micro-Raman suggests the enlarging local space around the bridging oxygen as the reason for the unexpected cell expansion when smaller In{sup 3+} along with defects replace Mn{sup 2+} in MnWO{sub 4}. - Graphical abstract: Despite of substitution of smaller In{sup 3+} for larger Mn{sup 2+}, the In-rich solid solution Mn{sub 0.71(2)}In{sub 0.19(1)}□{sub 0.10}WO{sub 4} undergoes a volume expansion of 0.4% with respect to MnWO{sub 4}. This could be explained by a local space expansion of 0.13% around bridging oxygen at O2 sites, as illustrated by dashed lines for clarity. - Highlights: • Investigation of Mn{sub (1−3x)}In{sub 2x}□{sub x}WO{sub 4} solid solutions (x=0–0.11). • An unexpected lattice expansion by In-doping. • Strong change in local environment around bridging oxygens. • Enhancement of atomic bonds in W{sub 2}O{sub 4} and WO{sub 2} units with increasing In-doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of lattice dynamics in yttrium doped NdMnO{sub 3} using Raman spectroscopy

A systematic study of Raman spectra on Yttrium doped NdMnO{sub 3} polycrystalline samples was undertaken to understand the lattice dynamics in this compound. Raman active phonons were analyzed and the observed peak were assigned to elucidate various phonon modes in the range (200 - 800) cm{sup −1}. It was observed that at 325 cm{sup −1} phonon frequency shifts upward as much as upto 4 % with increase in Yttrium content. Lattice distortions manifest themselves by frequency shifts in both bending and tilt modes of MnO{sub 6} octahedra, resulting in increase of Raman band line-widths.

36 MATERIALS SCIENCE↗

TH-E-BRF-07: Raman Spectroscopy for Radiation Treatment Response Assessment in a Lung Metastases Mouse Model

Purpose: Raman spectroscopy is an optical spectroscopic method used to probe chemical information about a target tissue. Our goal was to investigate whether Raman spectroscopy is able to distinguish lung tumors from normal lung tissue and whether this technique can identify the molecular changes induced by radiation. Methods: 4T1 mouse breast cancer cells were implanted subcutaneously into the flanks of 6 Balb/C female mice. Four additional mice were used as “normal lung” controls. After 14 days, 3 mice bearing tumors received 6Gy to the left lung with 6MV photons and the other three were treated as “unirradiated tumor” controls. At a 24-hour time point, lungs were excised and the specimens were sectioned using a cryostat; alternating sections were either stained with hematoxylin and eosin (H and E) for evaluation by a pathologist or unstained for Raman measurements. 240 total Raman spectra were collected; 84 from normal lung controls; 63 from unirradiated tumors and 64 from tumors irradiated with 6Gy in a single fraction. Raman spectra were also collected from normal lung tissues of mice with unirradiated tumors. Principal component analysis (PCA) and discriminant function analysis (DFA) were performed to analyze the data. Results: Raman bands assignable to DNA/RNA showed prominent contributions in tumor tissues while Raman bands associated with hemoglobin showed strong contributions in normal lung tissue. PCA/DFA analysis identified normal lung tissue and tumor with 100% and 98.4% accuracy, respectively, relative to pathologic scoring. Additionally, normal lung tissues from unirradiated mice bearing tumors were classified as normal with 100% accuracy. In a model consisting of unirradiated and irradiated tumors identification accuracy was 79.4% and 93.8% respectively, relative to pathologic assessment. Conclusion: Initial results demonstrate the promise for Raman spectroscopy in the diagnosis normal vs. lung metastases as well as the assessment of radiation therapy response. Further investigations are needed to validate these results. This study was supported in part by a research grant from Varian Medical Systems, Palo Alto, CA.

60 APPLIED LIFE SCIENCES↗