Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

R-matrix Resolved Resonance Region Evaluation of 140,142 Ce

Oak Ridge National Laboratory completed the resolved resonance region (RRR) evaluation of the two most abundant cerium isotopes, 140 Ce (88.45%) and 142 Ce (11.11%), as requested by the US Nuclear Criticality Safety Program. These evaluations are based on recent high-resolution transmission and capture measurements performed on nat Ce and highly enriched 142 Ce samples at the JRC-Geel Linear Accelerator facility, as well as measured thermal constants available from the EXFOR database. Starting from the resonance parameters of the ENDF/B-VIII.0 library followed by a preliminary R-matrix analysis, an updated set of resonance parameters and corresponding covariance information were derived by fitting these measured data using the Reich–Moore approximation of the R -matrix theory, as implemented in the SAMMY code system. The 140 Ce RRR upper energy limit was kept at 200 keV, whereas the 142 Ce resonance region was extended from 13 to 26 keV. Updated statistical properties were obtained for the new evaluations and compared to those derived from the ENDF/B-VIII.0 nuclear data library. The new evaluation work improved some of the discrepancies found in previous work, such as the capture resonance integral and stellar Maxwellian-averaged cross sections. These integral quantities were mainly derived from the fit of the latest measured data, especially the neutron capture yield data for 142 Ce isotope.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

EIC-related Generic Detector R&D Program

This program will support advanced R&D on innovative, cost-effective detector concepts which reduce risk and that either the one detector in the project scope or a second detector could incorporate. (The term "generic" conveys this duality.) The program is supported through R&D funds provided to Jefferson Lab by the DOE Office of Nuclear Physics, and is open to all segments of the EIC community. It is expected to be funded at an annual level of $2M, subject to availability of funds from DOE NP.

Mack, David↗
DOE OSTI2024

R&D for LAr + Xe + photosensitive dopants

LArTPCs are the technology of choice for current and future neutrino experiments, including those expected to make eagerly awaited measurements of accelerator neutrino oscillations in the coming decade. This technology provides a large active volume and sensitivity to GeV signals like accelerator neutrinos all the way down to 10s of MeV, covering part of the supernova neutrino spectrum.Expanding the reach of LArTPCs to below the 10 MeV range would substantially enhance the flagship analyses of experiments like DUNE, while potentially enabling the physics of solar neutrinos, dark matter searches, and neutrinoless double beta decay searches.We outline the R&D pathway for photosensitive dopants, whose introduction into the LAr active medium, has the potential to substantially increase ionization yields of LAr detectors and enable the detection of low energy signals in large LArTPCs. This R&D program will demonstrate the feasibility and impacts of introducing doped LAr into current and future neutrino detectors at the kTon scale including the Xenon + photosensitive doping strategy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

R-Matrix Analysis of the Neutron-Induced Cross Sections on 143 Nd Measured at LANSC [Slides]

An established use of R-Matrix codes is being implemented at LANSCE. There are unique features accessible with detectors at LANSCE that can be used to perform more complete R-Matrix analysis. Further, Spin separation is a powerful technique that can be applied in DANCE measurements. Additionally, a unique method to measure transmission with DICER is being undertaken. Transmission and capture data were analyzed in this work. The study can be extended to other channels. The results of the 143 Nd data are presented in this work. New resonances found in this work: 21 compared to ENDF/B-VIII.0 and JEFF-3.3, and 24 compared to JENDL-5. Wrong spin assignment in 23 resonances in ENDF/B-VIII.0, 25 in JEFF-3.3 and 26 in JENDL-5. The 143 Nd and 147,149 Sm have been analyzed. Exciting future for new measurements and analysis!

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Light Elements $R$-matrix Analyses with the SAMMY code towards the Foundation of Charged-particle Nuclear Data Libraries [Slides]

This presentation covers newly developed SAMMY module for inverse channel transformation. Additionally covered is the R-matrix analysis of 7 Be compound nucleus and the R-­matrix analysis of 17 O compound nucleus. Further touched on is the evaluated Nuclear Data File generation and processing with the AMPX code. The presentation concludes with talks on future evaluation work and tests on light nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

DOE OE 2021 Strategy White Papers on Microgrids: Program Vision, Objectives, and R&D Targets in 5 and 10 years–Topic Area #1

This white paper describes the program vision, objectives, and R&D targets in 5 to 10 years for the Department of Energy (DOE) Office of Electricity (OE) Microgrid R&D Program. The vision is to facilitate the nation’s transitions to (1) a more resilient and reliable, (2) more decarbonized electricity infrastructure, in which (3) microgrids have a reduced cost to implement. This strategy is developed in the context that the United States’ electricity delivery system is becoming more distributed in nature. The electricity generation capacity in 10 years may be 30-50% distributed energy assets.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

High-Power Targetry R&D for Next-Generation Accelerator Target Facilities

Beam-intercepting devices such as beam windows and particle-production targets are critical components of accelerator target facilities for High Energy Physics (HEP) experiments. The high-power, pulsed structure of the particle beams used for these experiments leads to thermal shock and high-cycle fatigue in addition to radiation damage resulting from the accumulated particle fluence. This can lead to degradation of the target system s mechanical and thermal properties; considerably reducing their lifetimes and presenting substantial challenges to reliable operation of multi-MW class facilities. Recently several major accelerator facilities have been forced to operate at reduced power levels due to target survivability concerns. Furthermore, at Fermilab it is planned to increase the neutrino production beam power up to 2.4 MW in coming years. Therefore, timely R&D on the irradiated behavior of target system materials is critical to efficient operation of accelerator facilities and full utilization of recent accelerator power upgrades for HEP research. This talk will begin with an overview of high-power targetry, and the significant challenges presented by beam power increases expected for future HEP experiments. We will then cover several past materials irradiation studies that have been completed by the High-Power Targetry R&D group at Fermilab and its collaborators on common accelerator and target materials such as graphite, beryllium, titanium, and tungsten. Finally, we will conclude with a discussion of two novel materials investigations under way within the group; high-entropy alloys for beam window applications, and electrospun nanofibers to serve as particle production targets.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Tables of Neutron Thermal Cross Sections, Westcott Factors, Resonance Integrals, Maxwellian Averaged Cross Sections, Astrophysical Reaction Rates, and r-process Abundances Calculated from the ENDF/B-VIII.1, JEFF-3.3, JENDL-5.0, BROND-3.1, and CENDL-3.2 Evaluated Data Libraries

We present calculations of neutron thermal cross sections, Westcott factors, resonance integrals, Maxwellian-averaged cross sections, astrophysical reaction rates, and solar system r-process abundances using the latest data from the major evaluated nuclear libraries for 849 ENDF target materials. The recent release of ENDF/B-VIII.1 library, progress in 252 Cf(SF) evaluation, extensive analysis of newly-evaluated neutron reaction cross sections, neutron covariances, and improvements in data processing techniques motivated us to calculate the nuclear industry and neutron physics parameters, produce s-process Maxwellian-averaged cross sections and astrophysical reaction rates, extract r-process abundances, systematically calculate uncertainties, and provide additional insights on currently available neutron-induced reaction data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Synthesis of Single Qutrit Circuits from Clifford + R Gates

The Clifford + R gate-set is a promising basis for fault-tolerant synthesis of qutrit unitaries. We present an algorithm for approximating an arbitrary single-qutrit unitary with a circuit over the Clifford + R gates. Moreover, we analyze its complexity and obtain the non-Clifford gates cost.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

R -matrix analysis of n + nat Cl reactions up to 1.2 MeV

The R -matrix analysis of neutron-induced reactions for two stable chlorine isotopes ( 35 Cl and 37 Cl) was performed in the energy range of thermal up to 1.2 MeV. Starting from the repository of the ENDF/B-VIII.0 library and following recent measurement series, this work represents a significant improvement, particularly in the evaluation of the ( n , p ) reaction channel. The evaluation methodology used the R -matrix code SAMMY to generate a set of Reich–Moore resonance parameters for both stable chlorine isotopes. Consistent with recently measured 35 Cl( n , p ) data, the presented evaluation features a dramatic increase in the magnitude of the ( n , p ) reaction channel over the ENDF/B-VIII.1 nuclear data library and previous ENDF/B libraries.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

High-Power Targetry R&D Roadmap for High Energy Physics

Designing a reliable target is already a challenge for MW-class facilities today and has led several major accelerator facilities to operate at lower power due to target concerns. With present plans to increase beam power for next-generation accelerator facilities in the next decade, timely R&D in support of robust high-power targets is critical to secure the full physics benefits of ambitious accelerator power upgrades. The next generation of high-power targets and beam-intercepting devices (beam dumps, absorbers, collimators ) will have more complex geometries, novel materials, and new concepts that allow for use of improved high-heat-flux cooling methods. Advanced numerical simulations need to be developed to support design of reliable high-power beam targets. In parallel, development of radiation-hardened beam instrumentation is needed. Irradiation methods for high-power targets must be further developed, and new irradiation facilities are needed since only a few facilities worldwide offer beams suitable for target testing. A comprehensive R&D program must be implemented to address the many complex challenges faced by multi-MW beam intercepting devices.

Pellemoine, Frederique [Fermilab]↗
DOE OSTI2022

Bioenergy Technologies Office: R&D State of Technology 2020

The U.S. Department of Energy’s Bioenergy Technologies Office (BETO) funds research and development (R&D) on technologies necessary for the deployment and production of cost competitive bioenergy, primarily biofuels. Results of experimental efforts are periodically compiled and compared with benchmark technology designs to assess overall progress. This report provides a status of those R&D efforts at the end of 2020. This report first describes the approach for assessing progress, followed by specific technology pathway configurations within which progress is charted. Each pathway configuration is described separately and the state of technology progress is presented for the combined pathway, as well as for pathway components. Detailed component descriptions reference technology barriers and challenges that are detailed in the appendix.

09 BIOMASS FUELS↗
DOE OSTI2026

Science & Technology Review: April/May 2026 R&D 100 Winners Issue

At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. Each year, the R&D 100 Awards recognize the top 100 innovations from a pool of international entries. Technologies developed at Lawrence Livermore earned four 2025 R&D 100 Awards, raising the Laboratory’s total to 186. A series of articles beginning on p. 4 describes each winning innovation: monolithic telescopes, the flexible imaging diffraction diagnostic for laser experiments, the in-air drop encapsulation apparatus, and the metaoptics-enabled large-scale 3D nanolithography platform.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Advancing Detector R&D for High-Pressure Gaseous Argon TPCs in Precision Neutrino Physics

High-pressure gaseous argon time projection chambers (HPgTPCs) represent an emerging detector paradigm for neutrino physics, combining increased target density with the intrinsic tracking and low thresholds of gaseous detectors. This approach enables detailed reconstruction of exclusive final states, improved particle identification, and sensitivity to low-energy and rare processes — capabilities that are increasingly central to precision oscillation measurements and searches for beyond-the-Standard-Model signatures. This abstract presents an overview of ongoing detector R&D toward high-pressure gaseous argon TPC operation, with emphasis on micro-pattern gas detector (MPGD) charge amplification in argon-based mixtures. We report experimental characterization of triple-GEM structures at pressures relevant for neutrino applications, including studies of multiplication factor scaling, stability, and operational voltage envelopes across gas admixtures. Measurements performed at the TOAD and GORG test stands at Fermilab help define viable amplification and electronics noise regimes in conditions where higher density imposes stricter constraints on signal formation. These results provide essential input to the optimization of high-pressure gaseous argon detectors for future neutrino experiments, including near-detector concepts such as ND-GAr in DUNE Phase II near detector upgrade. More broadly, this program shows how dedicated detector R&D can expand the precision frontier in neutrino physics by enabling complementary reconstruction capabilities beyond conventional detectors.

McConnell, Brenna [Indiana U.] (ORCID:000900041138↗
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence R - Raw Data

Sequence R: Step AOA, No Probes (P) This sequence was designed to quantify the effect of the five-hole probes on the 3-D blade static angle-of-attack response in the presence of rotational influences by repeating Sequence K without five-hole probes. This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speeds ranged from 6 m/s to 20 m/s, and data were collected at yaw angles of 0° and 30°. The rotor rotated at 72 RPM. Blade pressure measurements were collected. The five-hole probes were removed and the plugs were installed. Plastic tape 0.03-mm-thick was used to smooth the interface between the plugs and the blade. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link load cell was pre-tensioned to 40,000 N. During post-processing, the probe channels were set to read –99999.99. The blade pitch angle ramped continuously at 0.18°/s over a wide range of increasing and decreasing pitch angles. A step sequence was also performed. The blade pitch was stepped 5°; the flow was allowed to stabilize; and the pitch angle was held for 5 seconds. Then the pitch angle step was repeated. Again, a wide range of pitch angles was obtained, both increasing and decreasing. The file lengths for this sequence varied from 96 seconds to 6 minutes, depending on the pitch angle range. Some short points were collected at 0° yaw and 3° pitch to ascertain the functionality of the instrumentation and repeatability over time. The file name convention used the initial letter R, followed by two digits specifying wind speed, followed by two digits for yaw angle, followed by RU, RD, or ST, followed by the repetition digit. The angle of attack motion was differentiated by RU (ramp up), RD (ramp down), and ST (step down, then step up). This sequence is related to Sequences K and L.

17 WIND ENERGY↗
DOE OSTI2020

ExoReL{sup R}: A Bayesian Inverse Retrieval Framework for Exoplanetary Reflected Light Spectra

The high-contrast imaging technique is meant to provide insight into those planets orbiting several astronomical units from their host star. Space missions such as Wide-Field InfraRed Survey Telescope, Habitable Exoplanet Imaging Mission, and Large Ultra-Violet/Optical/InfraRed Surveyor will measure reflected light spectra of cold gaseous and rocky planets. To interpret these observations, we introduce ExoReL{sup R} (Exoplanetary Reflected Light Retrieval), a novel Bayesian retrieval framework to retrieve cloud properties and atmospheric structures from exoplanetary reflected light spectra. As a unique feature, it assumes a vertically nonuniform volume mixing ratio (VMR) profile of water and ammonia, and uses it to construct cloud densities. In this way, clouds and molecular mixture ratios are consistent. We apply ExoReL{sup R} on three test cases: two exoplanets (υ And e and 47 Uma b) and Jupiter. We show that we are able to retrieve the concentration of methane in the atmosphere, and estimate the position of clouds when the signal-to-noise ratio of the spectrum is higher than 15, in line with previous works. Moreover, we described the ability of our model to give a chemical identity to clouds, and we discussed whether or not we can observe this difference in the planetary reflection spectrum. Finally, we demonstrate how it could be possible to retrieve molecular concentrations (water and ammonia in this work) below the clouds by linking the nonuniform VMR profile to the cloud presence. This will help to constrain the concentration of water and ammonia unseen in direct measurements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

L-dwarf Detection from SDSS Images using Improved Faster R-CNN

We present a data-driven approach to automatically detect L dwarfs from Sloan Digital Sky Survey (SDSS) images using an improved Faster R-CNN framework based on deep learning. The established L-dwarf automatic detection (LDAD) model distinguishes L dwarfs from other celestial objects and backgrounds in SDSS field images by learning the features of 387 SDSS images containing L dwarfs. Applying the LDAD model to the SDSS images containing 93 labeled L dwarfs in the test set, we successfully detected 83 known L dwarfs with a recall rate of 89.25% for known L dwarfs. Several techniques are implemented in the LDAD model to improve its detection performance for L dwarfs, including the deep residual network and the feature pyramid network. As a result, the LDAD model outperforms the model of the original Faster R-CNN, whose recall rate of known L dwarfs is 80.65% for the same test set. The LDAD model was applied to detect L dwarfs from a larger validation set including 843 labeled L dwarfs, resulting in a recall rate of 94.42% for known L dwarfs. The newly identified candidates include L dwarfs, late M and T dwarfs, which were estimated from color (i – z) and spectral type relation. The contamination rates for the test candidates and validation candidates are 8.60% and 9.27%, respectively. The detection results indicate that our model is effective to search for L dwarfs from astronomical images.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Improved Models of R Coronae Borealis Stars

We present an improved numerical method to model subsolar He+CO-WD merger progenitors of R Corona Borealis stars that builds on our previous work. These improvements include a smooth entropy transition from the core to the envelope of the post-merger, inclusion of single-zone nucleosynthesis to mimic the effects of burning during the merger event, and post-processing the models with a larger nuclear network for analysis of s-process nucleosynthesis. We perform a parameter study to understand the effects of the entropy transition, peak temperature, and overshooting on our models. The models that best agree with observations of R Corona Borealis stars are processed with a much larger nuclear network to investigate s-process nucleosynthesis and the dredge-up of s-process products into the outer envelope in detail. We present a model with a significant enhancement in s-process elements, which also agrees with observed surface abundances and isotopic ratios of 16 O/ 16 O and C/O between 1 and 10. Finally, we find that the neutron exposure and initial neutron densities this model requires to obtain such an enhancement are much more consistent with i-process nucleosynthesis.

79 ASTRONOMY AND ASTROPHYSICS↗