Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Optimization of conditions for growth of vanadium dioxide thin films on silicon by pulsed-laser deposition

We systematically examined the effects of the substrate temperature (T{sub S}) and the oxygen pressure (P{sub O2}) on the structural and optical properties polycrystalline V O{sub 2} films grown directly on Si(100) substrates by pulsed-laser deposition. A rutile-type V O{sub 2} phase was formed at a T{sub S} ≥ 450 °C at P{sub O2} values ranging from 5 to 20 mTorr, whereas other structures of vanadium oxides were stabilized at lower temperatures or higher oxygen pressures. The surface roughness of the V O{sub 2} films significantly increased at growth temperatures of 550 °C or more due to agglomeration of V O{sub 2} on the surface of the silicon substrate. An apparent change in the refractive index across the metal–insulator transition (MIT) temperature was observed in V O{sub 2} films grown at a T{sub S} of 450 °C or more. The difference in the refractive index at a wavelength of 1550 nm above and below the MIT temperature was influenced by both the T{sub S} and P{sub O2}, and was maximal for a V O{sub 2} film grown at 450 °C under 20 mTorr. Based on the results, we derived the P{sub O2} versus 1/T{sub S} phase diagram for the films of vanadium oxides, which will provide a guide to optimizing the conditions for growth of V O{sub 2} films on silicon platforms.

36 MATERIALS SCIENCE↗

Recombination-active defects in silicon ribbon and polycrystalline solar cells

This paper reports results from a study of recombination-active structural defects in silicon ribbon and polycrystalline solar cells using the electron beam induced current (EBIC) technique in a scanning electron microscope. It is demonstrated that low temperature EBIC measurements can reveal a range of defects that are not observable at room temperature, including slip dislocations in silicon dendritic web ribbons as well as decorated twin boundaries and dislocation complexes in cast polycrystalline silicon solar cell materials.

Cheng, L. J.↗

Influence of arsenic flow on the crystal structure of epitaxial GaAs grown at low temperatures on GaAs (100) and (111)A substrates

The influence of arsenic flow in a growth chamber on the crystal structure of GaAs grown by molecular-beam epitaxy at a temperature of 240°C on GaAs (100) and (111)A substrates has been investigated. The flow ratio γ of arsenic As4 and gallium was varied in the range from 16 to 50. GaAs films were either undoped, or homogeneously doped with silicon, or contained three equidistantly spaced silicon δ-layers. The structural quality of the annealed samples has been investigated by transmission electron microscopy. It is established for the first time that silicon δ-layers in “low-temperature” GaAs serve as formation centers of arsenic precipitates. Their average size, concentration, and spatial distribution are estimated. The dependence of the film structural quality on γ is analyzed. Regions 100–150 nm in size have been revealed in some samples and identified (by X-ray microanalysis) as pores. It is found that, in the entire range of γ under consideration, GaAs films on (111)A substrates have a poorer structural quality and become polycrystalline beginning with a thickness of 150–200 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-RRR thin-films of NB produced using energetic condensation from a coaxial, rotating vacuum ARC plasma (CEDTM)

We have recently demonstrated unprecedentedly high values of RRR (up to 542) in thin-films of pure Nb deposited on a-plane sapphire and MgO crystal substrates. The Nb films were grown using a vacuum arc discharge struck between a reactor grade Nb cathode rod (RRR {approx} 30) and a coaxial, semi-transparent Mo mesh anode, with a heated substrate placed just outside it. The substrates were pre-heated for several hours prior to deposition at different temperatures. Low pre-heat temperatures (<300 C) and deposition temperatures (<300 C) give low RRR (<50) films, whereas higher pre-heat (700 C) and coating temperatures (500 C) give RRR=214 on a-sapphire and RRR=542 on MgO. XRD (Bragg-Brentano scans and Pole Figures), EBSD and SIMS data reveal several features: (1) on asapphire, higher temperatures show better 3D registry for epitaxial growth of Nb; the crystal structure evolves from textured, polycrystalline (with twins) to single-crystal; (2) on MgO, there is a transition from {l_brace}110{r_brace} planes to {l_brace}100{r_brace} as the temperature is increased beyond 500 C. The dramatic increase in RRR (from {approx}10 at <300 C to {approx}500 at >600 C) is correlated with better epitaxial crystal structure in both a-sapphire and MgO substrate grown films. However, the SIMS data reveal that the most important requirement for high-RRR Nb films on either substrate is the reduction of impurities in the film, especially hydrogen. The hydrogen content in the MgO grown films is 1000 times lower than in bulk Nb tested as a reference from SRF cavity grade Nb. This result has potential implications for SRF accelerators. Coating bulk Nb cavities with an MgO layer followed by our CEDTM deposited Nb films, might create superior SRF cavities that would avoid Q-slope and operate at higher peak fields.

08 HYDROGEN↗

Test Structures For Bumpy Integrated Circuits

Cross-bridge resistors added to comb and serpentine patterns. Improved combination of test structures built into integrated circuit used to evaluate design rules, fabrication processes, and quality of interconnections. Consist of meshing serpentines and combs, and cross bridge. Structures used to make electrical measurements revealing defects in design or fabrication. Combination of test structures includes three comb arrays, two serpentine arrays, and cross bridge. Made of aluminum or polycrystalline silicon, depending on material in integrated-circuit layers evaluated. Aluminum combs and serpentine arrays deposited over steps made by polycrystalline silicon and diffusion layers, while polycrystalline silicon versions of these structures used to cross over steps made by thick oxide layer.

Buehler, Martin G.↗

Revealing the Effects of the Non-solvent on the Ligand Shell of Nanoparticles and Their Crystallization

When nanoparticles (NPs) are assembled from solution, a common assembly method of choice is either solution destabilization or solvent evaporation technique. The destabilization of the NP solution by non-solvents results in the formation of faceted supercrystals (SCs) while periodic film-like assemblies are typically formed by solvent evaporation. In this article, we reveal the effect of non-solvents in washing, dispersing, and crystallizing NPs. Small angle neutron scattering (SANS) is employed for monitoring the ligand shell of NPs in solutions upon introduction of various non-solvents. The SC crystallization process is traced in situ with small-angle X-ray scattering (SAXS), and the structures of the resulting single-crystalline SCs are examined in detail by mapping the reciprocal space using SAXS and wide-angle X-ray scattering. Our study suggests that the relative miscibility of the non-solvent with solvents and ligands 4111 determines the solvation and thickness of the ligand shell and thereby the resulting structure of SCs. In the early stage of crystallization, truncated octahedral PbS NPs form SCs with face-centered cubic (fcc) symmetry. In the later stage, the fcc symmetry is preserved in the SC formed by larger (5.60 nm) NPs, but the SC assembled from smaller (4.14 nm) NPs undergoes a phase transition into body-centered cubic (bcc) lattice via Bain transformation, becoming a polycrystalline SC containing three structurally correlated bcc domains and one untransformed fcc domain. Our study provides the detailed understanding of the non-solvent effect that impacts beyond the formation of SCs, enabling the judicious selection of solvent/non-solvent mixtures for NP purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ba 4 RuMn 2 O 10 : A Noncentrosymmetric Polar Crystal Structure with Disordered Trimers

Phase-pure polycrystalline Ba 4 RuMn 2 O 10 was prepared and determined to adopt the noncentrosymmetric polar crystal structure (space group Cmc2 1 ) based on results of second harmonic generation, convergent beam electron diffraction, and Rietveld refinements using powder neutron diffraction data. The crystal structure features zigzag chains of corner-shared trimers, which contain three distorted face-sharing octahedra. The three metal sites in the trimers are occupied by disordered Ru/Mn with three different ratios: Ru1:Mn1 = 0.202(8):0.798(8), Ru2:Mn2 = 0.27(1):0.73(1), and Ru3:Mn3 = 0.40(1):0.60(1), successfully lowering the symmetry and inducing the polar crystal structure from the centrosymmetric parent compounds Ba 4 T 3 O 10 (T = Mn, Ru; space group Cmca). The valence state of Ru/Mn is confirmed to be +4 according to X-ray absorption near-edge spectroscopy. Ba 4 RuMn 2 O 10 is a narrow bandgap (~0.6 eV) semiconductor exhibiting spin-glass behavior with strong magnetic frustration and antiferromagnetic interactions.

36 MATERIALS SCIENCE↗

Size-dependent structural phase transitions and their correlation with photoluminescence and optical absorption behavior of annealed Zn0.45Cd0.55S quantum dots

Highlights: • Thermal Induced Structural Phase transition in nanostructured Zn{sub 0.45}Cd{sub 0.55}S. • Low temperature structural phase transition from cubic to hexagonal structure. • Thermal annealing effect on FTIR and Raman Spectra. • Thermal annealing effect on optical absorption of Zn{sub 0.45}Cd{sub 0.55}S nanoparticles. • Excitation-wavelength dependent photoluminescence emission spectra. - Abstract: In this paper, we investigate the effect of thermally induced structural phase transitions on the photoluminescence (PL) and optical absorption behaviour of Zn{sub 0.45}Cd{sub 0.55}S nanoparticles (NPs). Analysis of X-ray diffraction (XRD) patterns and high-resolution electron microscope (HRTEM) images reveal that the as-synthesized sample possesses zinc-blende-type cubic structure. In addition, at annealing temperature (T{sub a}) 400 °C, the cubic structure transforms completely into the wurtzite-type hexagonal structure. Furthermore, the second phase transition of the as-synthesized sample has observed at 700 °C, where the cubic structure has transformed into mixed polycrystalline phases of hexagonal ZnO, cubic CdO, monoclinic CdSO{sub 3}, and orthorhombic ZnSO{sub 4} structures. These new phases have also confirmed from the analysis of Raman and FTIR spectra. Analysis of UV–visible optical absorption spectra demonstrates that Increasing T{sub a} results in the decrease of optical band gap due the improvement in crystallinity accompanied by the increase in the particle size. The PL emission bands at an excitation energy of 3.818 eV exhibit redshift and a decrease in the intensity with increasing T{sub a} up to 500 °C. Meanwhile, further increase in T{sub a} up to 700 °C results in the enhancement of green emission intensity. On the other hand, PL emission spectra at 3.354 eV and T{sub a} 700 °C, reveal a dramatic increase in the emission intensity nearly by one-order of magnitude with respect to its value of the as-synthesized sample. This behaviour is ascribed to the incorporation of oxygen-related defects via thermal annealing in air, which act as additive radiative centers. Also, we have interpreted the observed spectral blue shift of PL emission spectrum with increasing excitation energy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and electrical properties of thin SrHfON films for high-k gate dielectric

Thin SrHfON films were prepared by reactive cosputtering of Hf-O and Sr-O targets in Ar/N{sub 2} ambient environment. Structural and electrical properties of the as-deposited and annealed SrHfON films used as gate dielectrics have been investigated. The SrHfON films have crystallization temperature higher than 900 deg. C. After annealing at 900 deg. C, high dielectric constant of 19.3 and effective work function of 4.13 eV was obtained for the SrHfON films. It is worth mentioning that the leakage current density of Au/SrHfON/IL SiO{sub x} gate stack is two orders of magnitude lower than that of polycrystalline silicon/HfO{sub 2} structure.

36 MATERIALS SCIENCE↗

Structural, electrical, and optical properties of antimony-doped tin oxide films prepared at room temperature by radio frequency magnetron sputtering for transparent electrodes

Antimony-doped tin oxide (ATO) films were prepared on 7059 Corning glass substrate by the radio frequency (rf) magnetron sputtering method using SnO{sub 2} target mixed with Sb of 6 wt % at room temperature. The working pressure was varied from 0.67 to 2 Pa in steps of 0.67 Pa, and the rf power was varied from 100 to 175 W in steps of 25 W at room temperature. The thickness of the deposited ATO films was about 150 nm. X-ray diffraction (XRD) measurements showed the ATO films to be crystallized with a strong (101) preferred orientation as the rf power is increased. The spectra revealed that the deposited films were polycrystalline, retaining the tetragonal structure. The grain size was estimated from the XRD spectra using the Scherrer equation and found to decrease with a decrease in the working pressure and an increase in the rf power, while the surface roughness was observed to be smoothened. The ATO film that was deposited at a working pressure of 0.67 Pa with rf power of 175 W showed the lowest resistivity of 8.6x10{sup -3} {Omega} cm, and the optical transmittance was 86.5% in the visible wavelength range from 400 to 800 nm.

36 MATERIALS SCIENCE↗

Synthesis and characteristics of spray deposited CuInS{sub 2} nanocrystals thin films for photovoltaic applications

Graphical abstract: - Highlights: • CuInS{sub 2} nanocrystals thin films were synthesized by spray pyrolysis technique. • They are polycrystalline and have chalcopyrite (tetragonal) structure. • They have high absorption coefficient ∼10{sup 4} cm{sup −1} and optimum band gap of 1.55 eV. • They showed excellent opto-electronic properties employable in photovoltaics. - Abstract: Nanocrystalline thin films of CuInS{sub 2}, an attractive absorber material for highly efficient and terrestrial photovoltaic devices, were deposited on ultraclean glass substrates using spray pyrolysis technique. The prepared films were characterized by FESEM, FETEM, HRTEM, AFM, XRD, optical absorption spectroscopy, photoluminescence and current–voltage characteristics. The films exhibit almost smooth, dense and uniform topography; and have nano-sized particles 40–60 nm of CuInS{sub 2}. XRD data show that the films are polycrystalline and have chalcopyrite (tetragonal) structure with crystallite size 45–60 nm. Optical absorption studies show that the band gap of spray deposited CuInS{sub 2} films is 1.55 eV, while absorption coefficient is of ∼10{sup 5} cm{sup −1}. PL spectra have only one peak at 1.43 eV which may be attributed to the excitonic recombination through donor–acceptor impurity levels in the sample. Furthermore, CdS/CuInS{sub 2} heterojunction was also produced onto ITO coated glass substrate to evaluate solar cell parameters such as short circuit current density, open circuit voltage, fill factor and conversion efficiency.

36 MATERIALS SCIENCE↗

Polycrystalline current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves using Co{sub 2}Mn(Ga{sub 0.25}Ge{sub 0.75}) Heusler alloy

We have studied the structure and magnetoresistive properties of polycrystalline current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves (PSVs) with Co{sub 2}Mn(Ga{sub 0.25}Ge{sub 0.75}) (CMGG) ferromagnetic layers and a Ag spacer. With (110) textured CMGG thin films and (111) textured Ag spacer, the PSVs annealed at 350 °C with 2 nm CoFe buffer layers showed ΔRA of 3.7 mΩ μm{sup 2} and MR ratio of 12.2%, while the PSVs without the buffer layer showed ΔRA of only 1.3 mΩ μm{sup 2}. High angle angular dark field images showed that the drop of ΔRA by annealing was due to the deterioration of the multi-layer CMGG/Ag/CMGG structure. Energy-dispersive X-ray spectroscopy images further confirmed the interdiffusion between CMGG layer and the Ag layer outside the CMGG/Ag/CMGG trilayer. In addition, we discuss the difference in the magnetoresistive properties of polycrystalline and epitaxial PSVs.

36 MATERIALS SCIENCE↗

A rotational and axial motion system load frame insert for in situ high energy x-ray studies

High energy x-ray characterization methods hold great potential for gaining insight into the behavior of materials and providing comparison datasets for the validation and development of mesoscale modeling tools. A suite of techniques have been developed by the x-ray community for characterizing the 3D structure and micromechanical state of polycrystalline materials; however, combining these techniques with in situ mechanical testing under well characterized and controlled boundary conditions has been challenging due to experimental design requirements, which demand new high-precision hardware as well as access to high-energy x-ray beamlines. We describe the design and performance of a load frame insert with a rotational and axial motion system that has been developed to meet these requirements. An example dataset from a deforming titanium alloy demonstrates the new capability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure-substitution limit correlation study on Cr{sup 3+} substituted polycrystalline yttrium iron garnet

Polycrystalline samples of Cr{sup 3+} - substituted yttrium iron garnet (Y{sub 3}Fe{sub 5}O{sub 12}) system with general chemical formula, Y{sub 3}Fe{sub 5-x}Cr{sub x}O{sub 12}, x = 0.0, 0.2, 0.4 and 0.6 were synthesized by double sintering ceramic technique and characterized by X-ray powder diffractometry. The Rietveld fitted X-ray diffraction patterns analysis revealed mono phase formation for x = 0.0 - 0.4 compositions while x = 0.6 composition possesses mixed phase character. The observed substitution limit has been discussed in the light of ionic size of substituent, electrostatic energy, electronic configuration and synthesis parameters. These observations strongly suggest that the electronic configuration of Cr{sup 3+}, which is favorable to the formation of d2sp3 (octahedral) type bonds, must be important. In the case of Cr{sup 3+}, the substitution does not appear to proceed well for x much greater than 0.5, this limitation probably is a consequence of the strong preference of a smaller ion Cr{sup 3+}, for a larger octahedral site which quickly leads to a condition not comparable with the requirement of the structure. The distribution of cations, mean ionic radii and theoretical lattice constant values have been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of polycrystalline Cu{sub 2}ZnSnSe{sub 4} layers with strongly preferential grain orientation via selenization of Sn/Cu/ZnSe(001)/GaAs(001) structures

We report on a simple approach for the fabrication of polycrystalline Cu{sub 2}ZnSnSe{sub 4} films on GaAs with strongly preferential grain orientation. Such layers are important for both fundamental spectroscopic investigations as well as studies of the impact of grain boundaries on the performance of solar cells. Cu{sub 2}ZnSnSe{sub 4} (CZTSe) layers were fabricated by growing a Sn/Cu/ZnSe(001) stack on a GaAs(001) substrate in a molecular-beam epitaxy system followed by selenization in a tube furnace. Raman spectroscopy as well as X-ray diffraction measurements combined with a microstructural investigation indicate the presence of the kesterite phase. Further, X-ray analysis such as rocking curves and ϕ-scans proves a preferential grain orientation of the obtained CZTSe films in all three dimensions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Oxygen Treatment on the Structural and Electrical Properties of Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}CuO{sub 5−δ}, Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 2}O{sub 7−δ} and Tl{sub 0.85}Cd{sub 0.15}Sr{sub 3}Ca{sub 2}Cu{sub 3}O{sub 9−δ} Superconductors

The solid-state reaction was used to prepare three different high-temperature superconductors, namely Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}CuO{sub 5−δ}, Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 2}O{sub 7−δ} and Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 9−δ}. The optimum calcinations were performed at 800{sup ∘}C, and the sintering was performed within 855–860{sup ∘}C. The samples were tested before and after oxygen treatment. It has been found that the oxygen flow on samples during preparation produces high-phase superconductors as compared with the samples prepared without oxygen flow. The four-probe techniques were used to measure the electrical resistivity to know the transition temperature (T{sub c}). It was found that the samples which were prepared with oxygen flow have the highest zero-transition temperatures (T{sub c(offset)}) of 85, 106 and 121 K for the samples Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}CuO{sub 5−δ}, Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 2}O{sub 7−δ} and Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 9−δ}, respectively. X-ray diffraction spectrum showed all samples are polycrystalline with a tetragonal structure and also showed an increase of the c-axis and lattice constant with the increase of CuO layers and oxygen content. It was noticed that the change of CuO layers of all samples produced a modification in the transition temperature, mass density (ρ{sub m}) and c/a parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polycrystalline iron nitride films fabricated by reactive facing-target sputtering: Structure, magnetic and electrical transport properties

Structure, magnetic and electrical transport properties of the reactive sputtered iron nitride films fabricated at different substrate temperatures (T{sub s}) and nitrogen flow rates (F{sub N{sub 2}}) were investigated systematically. The single-phase polycrystalline {gamma}'-Fe{sub 4}N film was obtained at F{sub N{sub 2}} = 20 sccm and T{sub s} = 450 deg. C. The films are soft ferromagnetic at room temperature. The electrical resistivity ({rho}) of the films fabricated at different F{sub N{sub 2}} and T{sub s} decreases with the decreasing temperature, showing a metallic behavior. Meanwhile, a variety of magnetoresistance (MR) behaviors were observed depending on the applied magnetic field and measuring temperature. It can be deduced that the complex MR behaviors are dominated by Lorentz force, spin-orbit interaction, and weak localization effect.

36 MATERIALS SCIENCE↗

Microstructure tuning and magnetism switching of ferroelectric barium titanate

Single-crystal and polycrystal BaTiO{sub 3} (BTO) materials synthesized by the physical and chemical methods, respectively, have been studied based on microstructural characterizations and magnetic measurements. The results of X-ray diffraction and Raman scatting spectra show that a single crystal tetragonal to polycrystalline pseudo-cubic structure transformation occurs in BTO ferroelectrics, dependent of growth conditions and interface effects. High-resolution transmission electron microscope data indicate that the as-prepared BTO/SrTiO{sub 3} (001) and BTO/SrRuO{sub 3}/SrTiO{sub 3} (001) heterostructures are highly c-axis oriented with atomic sharp interfaces. Lattice defects (i.e., edge-type misfit dislocations and stacking faults) in the heterostructures could be identified clearly and showed tunable with the variations of interface strain. Furthermore, the effects of vacancy defects on magnetic properties of BTO are discussed, which shows a diamagnetism–ferromagnetism switching as intrinsic vacancies increase. This work opens up a possible avenue to prepare magnetic BTO ferroelectrics. - Highlights: • Structure of BTO is tunable, depending on growth conditions and interface strain. • STEM–EDX data indicate the presence of lattice defects in BTO ferroelectrics. • BTO magnetism could be controlled by defects showing dia-ferromagnetism switching. • BTO with more vacancies shows RTFM, as evidence of vacancy magnetism effects.

36 MATERIALS SCIENCE↗