Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photoexcitations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Multifunctional Prussian blue analogue magnets: Emerging opportunities

There is a surge of interest to expand the search for entirely new classes of molecular magnets as the emergence of information storage and quantum computing devices. Prussian blue analogues as a family of molecular magnets are especially attracting wide attention due to their large number of derivatives with a range of magnetic ordering temperature from cryogenic to high temperature. Furthermore, this review presents Prussian blue analogues as multifunctional molecular magnets, which involves the development of molecular magnet syntheses and crystal structures, and magnetic properties under external stimuli. In addition, the porous network structures and vacancy order of Prussian blue analogues present a wide capability to interact with water molecules and gas adsorption. External stimuli, such as thermal, pressure, electric and magnetic field and photoexcitation, play an important role in controlling the hidden states and cooperative phenomena of high temperature molecular magnets based on Prussian blue analogues.

36 MATERIALS SCIENCE↗

Efficient BiVO 4 /CoFeO x H y photoanodes using controlled annealing and conformal linear-sweep electrocatalyst photodeposition

Although monoclinic bismuth vanadate (BiVO 4 ) is a promising photoanode for solar water splitting, its practical use is hindered by imperfect photocurrent generation/collection, low photovoltage compared to the bandgap, and corrosion side reactions that limit durability. Here, we introduce a controlled-annealing sol–gel process for BiVO 4 thin-film photoanodes along with an optimized linear-sweep-voltammetry photodeposition of CoFeO x H y cocatalysts. The resulting BiVO 4 films annealed at 550 °C exhibited a photocurrent density of 4.1 mA/cm 2 at 1.23 V RHE under 1 sun AM 1.5G solar simulation and a low onset potential of 0.26 V RHE due to high majority carrier conductivity, a crystalline bulk with reduced defects as evidenced by x-ray photoelectron spectroscopy and photoluminescence lifetime analysis, and thus enhanced photocarrier collection. However, significant degradation in performance was found due to interfacial photocorrosion. To protect the surface and speed the oxygen-evolution reaction CoFeO x H y cocatalyst layers were deposited. By varying the number of consecutive sweeps and adjusting the applied bias range, an ultra-thin (~15 nm) CoFeO x H y cocatalyst layer was uniformly grown deposited over 30 cycles on the BiVO 4 surface. The resulting BiVO 4 /CoFeO x H y yielded 4.03 mA/cm 2 at 1.23 V RHE and onset potential of 0.24 V RHE , with stable operation (~15 % loss in photocurrent at 1.23 V RHE relative to ~60 % loss in the uncatalyzed control sample). These conformal CoFeO x H y catalytic layers function simultaneously to selectively collect photoexcited holes from the BiVO 4 , catalyze the water-oxidation reaction, and protect the BiVO 4 from photodegradation.

42 ENGINEERING↗

Bipolar transport in diamond under photo-excitation: Evidence of free charge scattering by excitons

The fundamental characteristics of the Coulomb e-h interactions in ultra-pure diamond are investigated through time-resolved photoconductivity measurements in homogeneously photoexcited samples with ohmic-like low resistive B + sandwich contacts. Here, we demonstrate that, in the electric field, the bipolar charge mobility exhibits drastic reduction for photo-injected densities of 10 14 ‐10 16 cm ‐3 that cannot be explained only by mutual scattering between free e-h particles. This phenomenon is clarified by adding scattering caused by excitons whose density grows in the photo-exited system. The comparison of drift mobilities at 300 K in diamond obtained in this study and in pure Si and Ge obtained from literature, where exciton scattering is insignificant, is presented. We derive the empirical expression for the density dependences of bipolar mobility for the electric fields up to 1 kV/cm that could be useful for the development of diamond electronic devices.

Bipolar drift↗

Spectroscopy and dynamics of the v = 1 levels derived from the OH(D) stretching modes in the I‾∙HDO complex using CW and time-resolved, resonant two-photon infrared excitation of the cryogenically cooled ions

The vibrational energy levels of the two isotopomers adopted by the I‾∙HDO ion-molecule complex occur such that the OH(D) stretching fundamentals span its dissociation energy, thus enabling a spectroscopic investigation of the dynamics displayed by a system prepared in the vicinity of the dissociation threshold. This regime is explored using infrared photoexcitation of the mass-selected complexes cooled in a cryogenic radiofrequency (Paul) ion trap. Survey spectra are obtained at modest resolution using two-color, IR-IR photodissociation with nanosecond lasers to establish the level structure and unimolecular decay dynamics of the v = 1 and 2 levels of the bound OH(D) oscillator. The v = 1 levels are prepared by fixed frequency excitation in the trap and the absorption spectra arising from this excited state are probed by photofragmentation of the complex with a second pulsed IR laser after a variable delay time (0 to 20 ms). The transitions to levels above the dissociation threshold for I‾ + HDO formation are observed to be sharp (~5 cm -1 FWHM). At low pressure, the bound OD (v = 1) population relaxes very slowly (~3 ms), consistent with resonant fluorescence in the IR. The collisional quenching rate constants of this level by the He buffer gas were estimated to be on the order 3 x 10 -12 cm 3 /s based on a crude Stern-Volmer analysis. Here, the rotational fine structure and linewidths (≲0.01 cm -1 FWHM) arising from transitions of the non-bonded OH stretch fundamental of the OD-bound isotopomer that lies just above the dissociation energy are determined using single photon photodissociation by excitation of the 10 K ions with a single-frequency, CW IR laser in the ion trap.

Cryogenic ion infrared spectroscopy↗

All-solid-state Z-scheme BiVO 4 –Bi 6 O 6 (OH) 3 (NO 3 ) 3 heterostructure with prolonging electron-hole lifetime for enhanced photocatalytic hydrogen and oxygen evolution

As a visible-light response photocatalyst, BiVO 4 is widely used in photocatalytic oxygen evolution. In this study, a novel BiVO 4 –Bi 6 O 6 (OH) 3 (NO 3 ) 3 (BBN) heterostructure fabricates via a simple one-pot hydrothermal approach is certified to effectively restrain the recombination of carriers by efficient spatial charge separation. By employing BBN as a reductive-function photocatalyst, a solid-state Z-scheme is constructed to improve the photo-redox capacity of BiVO 4 and hydrogen production is realized in the BiVO 4 –BBN heterostructure for the first time. Furthermore, the solid-state Z-scheme introduced in the BiVO 4 –BBN ensures the photoexcited carriers with the powerful redox capacity to participate in the photocatalytic reaction.

36 MATERIALS SCIENCE↗

Structural and spectroscopic characterization of photoactive yellow protein and photoswitchable fluorescent protein constructs containing heavy atoms

Photo-induced structural rearrangements of chromophore-containing proteins are essential for various light-dependent signaling pathways and optogenetic applications. Ultrafast structural and spectroscopic methods have offered insights into these structural rearrangements across many timescales. However, questions still remain about exact mechanistic details, especially regarding photoisomerization of the chromophore within these proteins femtoseconds to picoseconds after photoexcitation. Instrumentation advancements for time-resolved crystallography and ultrafast electron diffraction provide a promising opportunity to study these reactions, but achieving enough signal-to-noise is a constant challenge. In this work, we present four new photoactive yellow protein constructs and one new fluorescent protein construct that contain heavy atoms either within or around the chromophore and can be expressed with high yields. Structural characterization of these constructs, most at atomic resolution, show minimal perturbation caused by the heavy atoms compared to wild-type structures. Spectroscopic studies report the effects of the heavy atom identity and location on the chromophore’s photophysical properties. None of the substitutions prevent photoisomerization, although certain rates within the photocycle may be affected. Overall, these new proteins containing heavy atoms are ideal samples for state-of-the-art time-resolved crystallography and electron diffraction experiments to elucidate crucial mechanistic information of photoisomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding and promoting the reaction kinetics of photothermally driven Diels–Alder reaction with minimized side reactions

The thermoreversible Diels–Alder (DA) reaction involving furan and maleimide precursors has been extensively exploited to develop reversible thermosets for circular economy and additive manufacturing. Recently, applications of photothermal nanoparticles, which can absorb light and generate nanoscale heat, have gained significant attention in driving the Diels–Alder (DA) reaction more efficiently. This approach can be utilized by various applications, for example, solar light-enhanced recycling, self-healing at targeted area, and photothermal 3-D printing. Here, in this work, we address an important fundamental question on the photothermal approach: how does the reaction kinetics of the photothermally driven DA reaction compared to that of the conventional heat driven one? We found that the forward DA reaction kinetics varies dramatically depending on a type of heat sources, i.e., light-induced photothermal heat or conventional heat, despite of a similar bulk temperature. We observed that the light-induced photothermal heat significantly enhances the DA reaction rate in comparison to the bulk heating in an inert environment. On the contrary, the photothermally driven forward DA reaction is significantly slower than that of the heat driven reaction in the presence of oxygen. This is attributed to the photoexcited electrons in photothermal nanoparticles that can generate singlet oxygen ( 1 O 2 ) in the presence of visible light. This singlet oxygen may facilitate an endoperoxide side reaction on the furan group, ultimately, retard the DA reaction from the furan group. These results reveal the effectiveness of photothermal nanoparticles in accelerating DA reaction while underscoring the need to minimize oxygen exposure to prevent unfavorable side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of transverse electron pulse trains using RF powered traveling wave metallic comb striplines

Advancements in ultrafast electron microscopy have allowed elucidation of spatially selective structural dynamics. However, as the spatial resolution and imaging capabilities have made progress, quantitative characterization of the electron pulse trains has not been reported at the same rate. In fact, inexperienced users have difficulty replicating the technique because only a few dedicated microscopes have been characterized thoroughly. Systems replacing laser driven photoexcitation with electrically driven deflectors especially suffer from a lack of quantified characterization because of the limited quantity. The primary advantages to electrically driven systems are broader frequency ranges, ease of use and simple synchronization to electrical pumping. Here, we characterize the technical parameters for electrically driven UEM including the shape, size and duration of the electron pulses using low and high frequency chopping methods. At high frequencies, pulses are generated by sweeping the electron beam across a chopping aperture. For low frequencies, the beam is continuously forced off the optic axis by a DC potential, then momentarily aligned by a countering pulse. Using both methods, we present examples that measure probe durations of 2 ns and 10 ps for the low and high frequency techniques, respectively. Here, we also discuss how the implementation of a pulsed probe affects STEM imaging conditions by adjusting the first condenser lens.

36 MATERIALS SCIENCE↗

Circular dichroism in hard X-ray photoelectron diffraction observed by time-of-flight momentum microscopy

X-ray photoelectron diffraction (XPD) is a powerful technique that yields detailed structural information of solids and thin films that complements electronic structure measurements. Among the strongholds of XPD we can identify dopant sites, track structural phase transitions, and perform holographic reconstruction. High-resolution imaging of k ll -distributions (momentum microscopy) presents a new approach to core-level photoemission. It yields full-field k x -k y XPD patterns with unprecedented acquisition speed and richness in details. Here, we show that beyond the pure diffraction information, XPD patterns exhibit pronounced circular dichroism in the angular distribution (CDAD) with asymmetries up to 80%, alongside with rapid variations on a small k ll -scale (0.1 Å -1 ). Measurements with circularly-polarized hard X-rays (hν = 6 keV) for a number of core levels, including Si, Ge, Mo and W, prove that core-level CDAD is a general phenomenon that is independent of atomic number. The fine structure in CDAD is more pronounced compared to the corresponding intensity patterns. Additionally, they obey the same symmetry rules as found for atomic and molecular species, and valence bands. Further, the CD is antisymmetric with respect to the mirror planes of the crystal, whose signatures are sharp zero lines. Calculations using both the Bloch-wave approach and one-step photoemission reveal the origin of the fine structure that represents the signature of Kikuchi diffraction. To disentangle the roles of photoexcitation and diffraction, XPD has been implemented into the Munich SPRKKR package to unify the one-step model of photoemission and multiple scattering theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of Macroscopic Single Crystals of Ge 2 Sb 2 Te 5 via Single-Shot Femtosecond Optical Excitation

Using in situ electron diffraction techniques, we demonstrate that femtosecond optical excitation above a threshold fluence of the amorphous, as-deposited, phase change material Ge 2 Sb 2 Te 5 creates large, 100 μm scale single crystals. This is 2 orders of magnitude larger than previously reported grains synthesized via photoexcitation. Transmission electron microscopy shows that these large crystals are dewetted regions with a face-centered cubic structure. Energy-dispersive X-ray spectroscopy indicates that the crystals have the same composition as the initial amorphous phase. In this work, we present a theoretical model which shows that this arises from a crossover from a nucleation-dominated crystallization regime to a growth-dominated crystallization regime, and we show that the measured grain size is consistent with Johnson–Mehl–Avrami–Kolmogorov (JMAK) crystallization theory for temperatures near the melting temperature. The ability to grow macroscopic single crystals from an amorphous material, and on arbitrary amorphous substrates, opens up a large area of potential applications, as well as new opportunities for tuning the nucleation, growth, and switching characteristics of phase-change materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering Electrical Conductivity in Stable Zirconium-Based PCN-222 MOFs with Permanent Mesoporosity

Electrically conductive metal–organic frameworks (MOFs) featuring zirconium-based nodes are of great interest for electrochemical and optoelectronic applications due to their exceptional thermal and chemical stability, although the number of such MOFs remains limited. Here in this paper, we demonstrate that electron deficient molecules such as transition metal(IV) bis(dicarbollide) (TM IV (C 2 B 9 H 11 ) 2 ; TM IV CB for short, where TM = Ni, Pd, and Pt) or C 60 , spatially infiltrated in the microporous channels of the zirconium-based porphyrinic MOFs PCN-222 and PCN-222-Zn, generate highly stable and electrically conductive frameworks in which the mesopores remain accessible to other guests. Solid-state density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations indicate incorporation of Ni IV CB and C 60 in the MOF micropores is energetically and structurally feasible. Interestingly, in contrast to the free species, strong donor–acceptor interactions between the MOF and Ni IV CB restrain it to a single conformation. Calculated electronic structures and charge-hopping conduction probabilities illustrate that efficient charge-transfer (CT) from photoexcited linkers to the guest molecules facilitates charge hopping in the framework, making the MOFs electrically conductive. The donor–acceptor conjugates also enhance exciton dissociation at their heterojunctions, fostering the formation of long-lived electron-trapped states with potential utility for photo- and electrochemical devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Electron Extraction and Protection Layers on Cu 2 O Photocathodes

Many semiconductor photoelectrodes used for solar fuel production require the addition of buffer and protection layers to enhance their solar-to-fuel conversion efficiency and long-term stability. For example, Cu 2 O, which is the most efficient oxide-based photocathode but suffers from photocorrosion, has been assembled with various buffer and protection layers to suppress photocorrosion and use more photoexcited electrons for useful reactions such as water reduction to H 2 . However, the abilities of various buffer and protection layers to extract electrons from Cu 2 O have never been directly evaluated. Instead, their abilities were estimated based on the photocurrent for water reduction after adding a hydrogen evolution catalyst on top of them. In these evaluations, as the photocurrent is affected not only by the buffer or protection layer but also by the catalyst, the ability of the buffer or protection layer to extract electrons from Cu 2 O could not be accurately determined or compared. Here, in this study, we demonstrate that 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL), whose reduction rate is faster than the photocorrosion rate of Cu 2 O, can be used as an effective electron scavenger to directly evaluate any change caused by a buffer or protection layer in electron-hole separation in Cu 2 O. In particular, we compared the performances of ZnO and TiO 2 layers on Cu 2 O for extracting electrons and suppressing photocorrosion. We also compared the performances of TiO 2 layers prepared by electrodeposition and atomic layer deposition (ALD) to show that the deposition method can make a striking impact on the performance of the same TiO 2 because it can affect the critical characteristics of the layer (e.g., defect levels, conductivity, interfacial atomic arrangements) that govern interfacial charge transfer in multilayer photoelectrodes.

36 MATERIALS SCIENCE↗

Anthracene Diphosphate Ligands for CdSe Quantum Dots; Molecular Design for Efficient Upconversion

Quantum dot (QD)-sensitized photon upconversion follows a multi-step energy transfer process from the QD to transmitter ligand to a soluble annihilator. Using a novel 10-R-anthracene-1,8-diphosphoric acid (R = octyl, 2- hexyldecyl, phenyl) ligand with high binding affinity for CdSe QD surfaces, we demonstrate a photon upconversion process that is limited by the transmitter to annihilator transfer efficiency. Using 1 H NMR spectroscopy, we demonstrate that these bidentate diphosphate ligands rapidly and irreversibly displace two carboxylate ligands. These ligands mediate energy transfer from the photoexcited QDs to a triplet annihilator (1,10-diphenylanthracene), producing overall photon upconversion quantum efficiencies as high as 17%, the highest for QDs with no shells. In conclusion, transient absorption spectroscopy shows that the anthracene dihydrogen phosphate (ADP) ligand supports a 3.4 fold longer triplet state lifetime compared to 9-anthracene carboxylic acid (299.9 ± 9.5 vs 88.2 ± 2.1 μs), increasing the probability of energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Atom Metal Oxide Sites as Traps for Charge Separation in the Zirconium-Based Metal–Organic Framework NDC–NU-1000

Solvothermal deposition in metal–organic frameworks (MOFs) can be utilized to mount single-metal-atom catalytic species at chemically reactive sites on hexa-Zr(IV)-oxy(oxo,hydroxo,aqua) nodes in nanoscale crystallites of the MOF NDC-NU-1000 in a self-limiting fashion. Upon photoexcitation of the 1,3,6,8-tetrakis( p -benzoato)pyrene chromophores of the parent framework, charge transfer may occur between the chromophores and the installed heterometal sites. Extended X-ray absorption fine structure studies revealed the single-atom nature of the installed species. A combination of steady-state and ultrafast optical spectroscopy was utilized to uncover evidence of a charge-separated (CS) state arising in the metalated samples. The relevant dynamics were characterized with transient photoluminescence and femtosecond transient absorption spectroscopy. Here, we find that a titanium-oxy single atom site gives rise to the longest-lived CS species compared to cobalt and nickel in a similar arrangement. This study provides guidance in designing MOF-based catalytic systems for photocatalysis and solar-fuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Metal Cocatalysts in the Photocatalytic Production of Hydrogen from Water Revisited

The use of photocatalysts to promote the production of molecular hydrogen from water, following the so-called water splitting reaction, continues to be a promising route for the green production of fuels. The molecular basis of this photocatalysis is the photoexcitation of electrons from the valence band of semiconductors to their conduction band, from which they can be transferred to chemical reactants, protons in the case of water, to promote a reduction reaction. The mechanism by which such a process takes place has been studied extensively using titanium oxide, a simple material that fulfills most requirements for water splitting. However, photocatalysis with TiO 2 tends to be highly inefficient; a cocatalyst, commonly a late transition metal (Au, Pt) in nanoparticle form, needs to be added to facilitate the production of H 2 . The metal is widely believed to help with the scavenging of the excited electrons from the conduction band of the semiconductor in order to prevent their recombination with the accompanying hole formed in the valence band, a step that cancels the initial photon absorption and competes with the photolytic chemical reduction. Here we review and analyze the molecular basis for that mechanism and argue for an alternative explanation, that the role of the metal is to help with the recombination of the atomic hydrogen atoms produced by proton reduction on the semiconductor surface instead. First, we summarize what is known about the electronic structure of these photocatalysts and how the electronic levels need to line up for the reduction of protons in water to be feasible. Next, we review the current understanding of the dynamics of the steps associated with the absorption of photons, the de-excitation via electron–hole pair recombination and fluorescence decay, and the electronic transitions that lead to proton reduction, and contrast those with the rates of the chemical steps required to produce molecular hydrogen. The following section addresses the changes introduced by the addition of the metal cocatalyst, comparatively evaluating its role as either an electron scavenger or a promoter of the recombination of hydrogen atoms. A discussion of the viable chemical mechanisms for the latter pathway is included. Finally, we briefly mention other associated aspects of this photocatalysis, including the possible promotion of H 2 production with visible light via resonant excitation of the surface plasmon of Au nanoparticles, the use of single-metal (Au, Pt) atom catalysts and of yolk–shell nanostructures, and the reduction of organic molecules. We end with a brief personal perspective on the possible generality of the concepts introduced in this Critical Review.

08 HYDROGEN↗

First-Principles Study of Interaction between Molecules and Lewis Acid Zeolites Manipulated by Injection of Energized Charge Carriers

Metal dopants in Lewis acid zeolites can be applied to manipulate the interaction between the active sites and molecular reactants. However, only a few elements can be introduced into the zeolite framework to generate strong Lewis acid sites. In this study, we propose an alternative approach to tune the interaction between zeolite and molecules by introducing energized charge carriers that are photoexcited in a complex of plasmonic metal and zeolites. Here, through density functional theory (DFT) calculations, we show that although the energized electrons do not impact the adsorption of ammonia, which is used as a probe molecule, on Zr- and Si-BEA, ammonia’s heat of adsorption can be reduced up to 60% on Sn-BEA and 20% on Ti-BEA, respectively, because of the localized population of the electrons at the Sn and Ti center. This most pronounced effect in Sn-BEA is attributed to the Sn-induced midgap states and the strong electronegativity of Sn atoms. In contrast, the energized holes can strengthen the interaction between zeolites and ammonia by at least 10%. Particularly, if an energized hole is present in the system, the heat of adsorption of ammonia within Si-BEA can increase 3-fold, shifting from weak to moderate interaction. We find that, similar to closed sites, the effect of energized charge carriers can also be extended to open sites of Lewis acid zeolites. Our study provides fundamental insights for unlocking the potentials of integrating plasmonic metals with zeolites and brings an additional degree of control to tune the interfacial interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How Does Metal Spin State Affect Electronic Communication in Mixed-Valence Dimers? Insights from Ultrafast Near-Infrared and Soft X-ray Transient Absorption Spectroscopy

Recent advancements in photocatalysis, photovoltaics, and quantum information science take advantage of electron spin, and determining how spin multiplicity affects electron transfer is key to understanding these phenomena. Here, in this study, we examine how metal spin state affects electronic communication in an organometallic mixed-valence dimer, ferrocenyl cobaltocenium ([Fe II Cp 2 Co III Cp 2 ] + ). This complex can be photoexcited from its low-spin singlet Fe II ground state to form intermediate-spin triplet Fe II and high-spin quintet Fe II excited states. Using femtosecond optical transient absorption (OTA) spectroscopy with visible (vis), near-infrared (NIR), and short-wave IR (SWIR) probes, supported by time-dependent density functional theory (TD-DFT) calculations, we measure Fe II Co III →Fe III Co II intervalence charge transfer (IVCT) bands in each of the Fe II spin states. Mulliken–Hush analysis of the excited-state IVCT bands was used to compute the electronic coupling between the metal centers in all three spin states, which increased as quintet < triplet < singlet. Meanwhile, the peak energy of the bands, and thus the ΔG of the IVCT transition, increased as triplet < quintet < singlet. Then, to directly probe the electronic structure at each metal center, we employed picosecond soft X-ray transient absorption (XTA) spectroscopy at the Fe and Co L 3 edges. Our results show that the low-spin and high-spin states of [Fe II Cp 2 Co III Cp 2 ] + are valence-localized, while the intermediate-spin state is partially delocalized. The differences in charge delocalization are attributed to differences in orbital occupation and geometry that affect the free energy and superexchange coupling.

Burke, John H. [Univ. of Illinois at Urbana-Champa↗

Reactions of U(DMSO) 8 (ClO 4 ) 4 with Terpyridine Yield Dimeric Hydrolysis Products and Induce C–C Coupling

Reactions have been carried out using UIV(DMSO) 8 (ClO 4 ) 4 with 2,2′:6′,2″-terpyridine (terpy) under nonaqueous conditions. At room temperature in acetonitrile, the combination of the U(IV) starting material with terpy resulted in a mixture containing [UO 2 (DMSO) 2 terpy][ClO 4 ] 2 ·MeCN, while increasing the water content led to the hydrolysis products [(UO 2 (DMSO)terpy) 2 (μ 2 –O)][ClO 4 ] 2 and [(UO 2 terpy) 2 (μ 2 –OH) 2 ][ClO 4 ] 2 ·MeCN·H 2 O. Performing the reaction at slightly elevated temperature with no added water led to the formation of [UO 2 sexipyridine][ClO 4 ] 2 ·MeCN. This new uranyl complex contains the hexadentate ligand 2,2′:6′,2″:6″,2″:6‴,2⁗:6⁗,2⁗′-sexipyridine, which formed in situ from the tetravalent uranium starting material, where photoexcited uranyl or in situ generated peroxide could have induced C–C coupling. Analysis of bonding in the dimeric uranyl species via quantum chemical methods revealed a small increase in covalency of the bridging oxo unit and a slightly greater stability compared to the bridging hydroxo compound, which causes a significant shift in the uranyl symmetric stretch in the Raman spectrum. Structural, spectroscopic, and computational comparisons are made across the series of compounds, providing insight into the bonding and reactivity of uranium in nonaqueous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗